The New Generation of High Power Tools
www.cooperhandtools.com/weller
New Product Introduction: WD1000HPT
The WD1000HPT consists of –
The WP120 Soldering Iron
Combining a compact, powerful heating element with a replaceable soldering tip the WP 120
guarantees dynamic performance. The rapid transfer of heat into the soldering tip is quickly
and precisely controlled with sophisticated electronics which allows the WP 120's compact
design to cope with big and difficult solder joints.
The WD1M Power Unit
The microprocessor controlled WD1M has a number of in built special functions which make it
ideally suited for use in production, rework and laboratory environments.
WD1Ms' from April 2008 on are supplied with new advanced software specially designed for
the WP 120 iron.
WDH10T Stop + Go Iron Safety Rest
Using the special menu on the WD 1M iron setback time and temperature as well as auto off
time can be programmed and they are automatically activated when the soldering iron is
placed into the WDH 10T safety rest. When the iron is removed from the rest tip temperatu re is
restored immediately to the set working level. Using this Stop + Go safety rest is an easy and
effective way to increase tip life particularly when using lead free solder.
The WD 1000HPT station features
Weller's new 120 W soldering iron, the
WP 120.This iron is ideal for soldering
on difficult circuit boards with heat
sinks that cause dissipation in heat
transfer. Target applications include
high density circuit boards, High
Frequency / Radio Frequency
applications, and solar panel
production.
The Weller WD1000HPT station is
specifically designed for soldering
operations which need a combination
of high energy and maximum precision.
Compatibility Statement:
The WD1M power unit is upgraded from April 2008 on to have a larger 160 Watt transformer, plus advanced
software to power the WP120 soldering pencil. WP120 is not compatible with any other Weller power unit.
Technical Data WD1000HPT
Dimensions: 5.27” x 4.25” x 5.78” (134
x 108 x 147 mm)
Mains power supply: 120 V / 50/60 Hz
Power: 160W
Temperature control: 150°F - 850°F (50°C - 450°C)
Temperature accuracy: +/-17°F (+/- 9°C)
Temperature stability: +/-9°F (+/-5°C)
Soldering tip leakage resistance: <2 ohm (tip-to-ground)
Soldering tip leakage current: <2mV (tip-to-ground)
ESD Safe – RoHS Compliant – MIL-SPEC compliant
www.cooperhandtools.com/weller
WD1M Power Unit
(date code 04/08 or later)
WP120 120 Watt
Soldering Pencil
WDH10T Stop + Go
Stand with Dry Tip
Cleaning System
WD1000HPT Package Contents
•WD1M Power Unit
(with date code 04/08 or later)
•WP120 120 Watt Soldering Pencil (Order no.
0052919399)
•WDH10T Stop + Go Stand
(Order no. 0051516199)
•WDC2 Dry Tip Cleaning System
(Order no. 0051512599)
•Instructions and safety information
New!! XT Series Tips for WP120
The wire-wound heater
is designed for maximum
thermal recovery
The tip is shaped to fit snugly over the
pyramid shaped heater slug to give you
maximum surface contact between the tip
and the heater
How are
they
different?
New Product Introduction: WD1000HPT
Order No. Model Type W idth H eight Length
T0054470199 XTAL Chisel 1.6 mm 1.0 mm 39 mm
T0054470299 XTM Chisel 3.2 mm 1.2 mm 39 mm
T0054470399 XTA Chisel 1.6 mm 0.7 mm 36 mm
T0054470499 XTB Chisel 2.4 mm 0.8 mm 36 mm
T0054470599 XTC Chisel 3.2 mm 0.8 mm 36 mm
T0054470699 XTD Chisel 4.6 mm 0.8 mm 34.5 mm
T0054470799 XTE Chisel 5.9 mm 1.2 mm 34.5 mm
New XT Series Soldering Tips for WM120
Soldering Pencil
Technical Support
Cooper Hand Tools
P.O. Box 728
Apex, NC 27502
Tel.: (866) 498-0484
Email: weller-na@cooperindustries.com
