06-Serie IKH-A-maj images_06-Serie IKH-A 06/11/14 14:02 Page16 IKH series Surface mount half pitch DIP switches Very low profile UG1410A * 1,27 mm (.050) terminal to terminal pitch * Overall height from PCB : 1,6 mm (.063) only * Very small PCB space requirement * Process compatible - withstand IR reflow soldering (see Technical Information, Surface Mount, end of catalogue) * Washable (tape seal standard) * Actuator set in OFF position available on request IKH0404000 IKH0403000 (75) 4 6,31 (.248) IKH0604000 IKH0603000 (54) 6 8,85 (.348) IKH0804000 IKH0803000 (40) 8 11,39 (.448) IKH1004000 IKH1003000 (33) 10 13,93 (.548) 0.60 PAS 1.27 (.024) (.050) PITCH 6.70 0.40 (.264) (.016) A 1.27x(P-1) (.050x(P-1)) PAS 1.27 (.050) PITCH Supplied with all poles in "ON" position. Switches without tape seal : on request - Long terminal : on request. TAPE AND REEL PACKAGING * Max. current/voltage rating : - switching : 25mA 24VDC - non switching : 100mA 50VDC * Initial contact resistance : 100 m max. * Insulation resistance : 100 M min. at 500VDC * Dielectric strength : 300 Vca min. * Electrical life : 1.000 cycles * Travel : 0,60 mm (.024) * Operating temperature : -20C to +70C * Storage temperature : -40C to +85C 12.00 (.472) F L ON 1 2 3 4 5 6 7 8 Pos. Tape dim. "L" Reel dim. "A" 2 12,00 (.472) 12,40 (.488) 4 16,00 (.629) 16,40 (.646) 6 16,00 (.629) 16,40 (.646) 8 24,00 (.944) 24,40 (.960) 10 24,00 (.944) 24,40 (.960) O100.00 mini (3.937 DIA MIN) o330.00 Maxi 0.76 (0.30) SPECIFICATIONS Unrolling direction (12.992 DIA MAX) 6.15 ON 1 2 3 4 5 6 7 8 7.40 3,77 (.148) (.291) 2 4.90 IKH0203000 (125) (.193) IKH0204000 (.177) (.242) Dimension "A" (.060) No pos. 0.10 IC tubes (Qty) (.004) Tape & reel 1.50 Tape 4.50 MATERIALS * Case and cover : high temperature thermoplastic UL 94-V0, black * Actuator : high temperature thermoplastic UL 94-V0, white * Contacts : phosphor bronze, gold plated, over nickel barrier * Terminals : tin plated * Tape seal : polyimide Antistatic packaging - standard packaging units * Reels of 4.000 pieces Tape meeting international standard IEC - Publication 286-3 (EIA481A) * IC tubes : see above. O13.000.25 (.511 DIA.009) 3.00 (.118) A Dimensions in mm and inches. The company reserves the right to change specifications without notice. F-16 www.apem.com APEM