EPCOS AG 2012. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
SAW RF filter for base station
LTE
Series/type:
Ordering code: B5159
B39172B5159U410
Date:
Version: February 15, 2012
2.0
2February 15, 2012
B5159
1747.5 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW RF filter
Data sheet
Application
RF filter for LTE base station
Usable passband 75 MHz
High rejection in upper stopband
Unbalanced operation
Features
Package size 3.0 x 3.0 x 1.10 mm3
Package code DCC6C
RoHS compatible
Approximate weight 0.037 g
Ceramic Package for Surface Mount Technology
(SMT)
Ni, gold-plated terminals
Electrostatic Sensitive Device (ESD)
Filter surface passivated
Moisture Sensitivity Level 1
Pin configuration
2 Input
5 Output
1, 3, 4, 6 To be grounded
3February 15, 2012
B5159
1747.5 MHz
SAW Components
SAW RF filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
Characteristics
Temperature range for specification: T = –33 ˚C to +100 ˚C
Terminating source impedance: ZS=50unbalanced and matching network
Terminating load impedance: ZL=50 unbalanced and matching network
min. typ.
@ 25 ˚C max.
Nominal frequency fN 1747.5 MHz
Maximum insertion attenuation αmax 2.2 3.3 dB
(including matching network)
Amplitude ripple (p-p) ∆α
1710 ... 1785 MHz 0.3 1.2 dB
1710 ... 1785 MHz (in any contiguous 5MHz band) 0.1 0.8 dB
Group delay ripple (p-p) ∆τ
1710 ... 1785 MHz 6 20 ns
Phase ripple (p-p) ∆ϕ
1710 ... 1785 MHz 12 °
Error vector magnitude1) EVM
1710 ... 1785 MHz 0.2 1.02) %
Absolute group delay τ
1710 ... 1785 MHz 13 20 ns
Relative attenuation (relative to αmax)αrel
70 ... 110 MHz 30 78 dB
300 ... 400 MHz 30 61 dB
852 ... 1291 MHz 25 44 dB
1205 ... 1250 MHz 30 45 dB
1372 ... 1603 MHz 25 34 dB
1603 ... 1681 MHz 10 17 dB
1885 ... 1960 MHz 20 31 dB
2110 ... 2170 MHz 25 48 dB
2422 ... 2507 MHz 45 52 dB
3775 ... 3915 MHz 25 66 dB
4295 ... 4942 MHz 15 50 dB
4February 15, 2012
B5159
1747.5 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW RF filter
Data sheet
Matching network to 50 unbalanced input and output
Element values depend upon board layout and properties.
VSWR input 1710 ... 1785 MHz 1.6:1 2.2:1
output 1710 ... 1785 MHz 1.5:1 2.2:1
Temperature Drift
high temperature3) 1710 ... 1785 MHz 0.2 0.54) dB
low temperature5) 1710 ... 1785 MHz 0.15 0.46) dB
1) EVM calculation based on root raised cosine filtered QPSK signal
(fcRRC within 1717.5 ... 1782.5 MHz, bwRRC= 3.84 MHz)
2) EVM relaxed to 2.5 % for fcRRC = 1712.5 MHz for temperatures below 0 ˚C
3) T25˚C is transmission at 25 ˚C in dB,T100˚C at 100 ˚C in dB
4) 0.35 dB for frequency range 1715 ... 1780 MHz (roll-offs excluded)
5) T25˚C is transmission at 25 ˚C in dB,T-33˚C at -33 ˚C in dB
6) 0.35 dB for frequency range 1715 ... 1780 MHz (roll-offs excluded)
Maximum ratings
Operable temperature range T –40/+100 ˚C
Storage temperature range Tstg –40/+100 ˚C
DC voltage VDC 5 V
ESD voltage VESD 501)
1) acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Vmachine model, 1 pulse
Input power at
1710...1785MHz PIN 22 dBm 24 h, 55 °C, CW
min. typ.
@ 25 ˚C max.
tempdrifthightemp max T25°CT 100°C
()min T25°CT 100°C
()
2
--------------------------------------------------------------------------------------------------------------
=
tempdriftlowtemp max T25°CT 33°–C
()min T25°CT 33°–C
()
2
--------------------------------------------------------------------------------------------------------------
=
Ls1
Lp2
Ls3
Cp4
Ls1 = 13.0 nH
Lp2 = 5.6 nH
Ls3 = 4.3 nH
Cp4 = 1.5 pF
5February 15, 2012
B5159
1747.5 MHz
SAW Components
SAW RF filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
Transfer function (S21, narrowband, normalized)
Transfer function (S21, wideband)
6February 15, 2012
B5159
1747.5 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW RF filter
Data sheet
S11 function
S22 function
Smith charts
7February 15, 2012
B5159
1747.5 MHz
SAW Components
SAW RF filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
References
Type B5159
Ordering code B39172B5159U410
Marking and package C61157-A7-A67
Packaging F61074-V8168-Z000
Date codes L_1126
S-parameters B5159_NB.s2p, B5159_WB.s2p
see file header for port/pin assignment table
Soldering profile S_6001
RoHS compatible defined as compatible with the following documents:
"DIRECTIVE2002/95/ECOFTHEEUROPEANPARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maxi-
mum concentration values for certain hazardous substances in
electrical and electronic equipment."
Matching coils See Inductor pdf-catalog
http://
www
.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
for a large variety of matching coils.
For further information please contact your local EPCOS sales office or visit our webpage at
w
ww.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2012. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
t
he international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
t
he type in question please also contact one of our Sales Offices.
8February 15, 2012
Important notes
T
he following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.