EURO QUARTZ XOPL53 Programmable Oscillators Low Jitter 5 x 3.2mm SMD Freq: 1.0MHz to 133.0MHz Features Very quick delivery Industry-standard 5 x 3.2mm miniature SMD package Ultra-low jitter at 1 million samples Supply Voltage 2.7V, 3.3V or 5.0Volts Enable/Disable or Power Down options OUTLINE & DIMENSIONS Description XOPL53 programmable oscillators provide custom frequency and specification oscillators with a very quick delivery time. Jitter, general performance and specification is comparable to discrete frequency oscillators. Operating Load Conditions Maximum Capacitive Load TTL 5.0 Volt Supply 1.0MHz to 40MHz: 40.0MHz ~ 133MHz: Electrical Specification Frequency Range: Frequency stability: Operating Temperature Range: 0 ~ +70C -20 ~ +70C -40 ~ +85C Storage Temperature Range: Ageing: Packaging: Output Levels: Maximum Output Loads: 1.000MHz ~ 133.0MHz from 25ppm to 100ppm Part Code 'C' Part Code 'D' Part Code 'I' -55 ~ +125C 5ppm per year max. Bulk packed or Tubed CMOS or TTL Below 40MHz: 30pF Above 40MHz: 15pF (See note opposite) Duty Cycle: Below 40MHz: 45/55% min. Above 40MHz: 40/60% min. Rise/Fall Times: 4ns max. Supply Current: 25mA (unloaded) Standby Current: 10A typical, 50A max. Start-up Time: 10ms max. Power Down and Disable Delay Time Synchronous: T/2ns typical, T +10ns typical Asynchronous: 10ns typical, 15ns maximum (T - frequency period) Output Enable Time: 100ns maximum Period Jitter S 1MHz ~ 133MHz: 8ps typical, 99ps max. Period Jitter Peak to Peak <33.0MHz: 65ps ypical, 99ps max. 33MHz ~ 133MHz: 65ps typical, 80ps max. 50pF 25pF Maximum Capacitive Load CMOS 5.0 Volt Supply 1.0MHz to 66MHz: 50pF 66.1MHz to 133MHz: 25pF 3.3 Volt/2.7 Volt Supply 1.0MHz to 40MHz: 30pF 40.0MHz to 100MHz: 15pF Model Selection Guide Part Number Example: 24.890MHz XOPL53100UCTA (see Part Numbers table) Part Numbers 24.890MHz XOPL53100 U C T A Frequency Series Designation XOPL53 Stability over Temp. 100 = 100ppm 050 = 50ppm 025 = 25ppm Supply Voltage Blank = 5.0 Volts 5% A = +3.3 Volts 5% B = +2.7 Volts 5% Output Option T = Enable/Disable or P = Power Down U = CMOS/TTL Output Operating Temp. Range C = 0 ~ +70C D = -20 ~ +70C I = -40 ~+85C Synchronous/Asynchronous By default, Euroquartz produce Enable/Disable and Power Down function oscillators as ASYNCHRONOUS. If SYNCHRONOUS operation is required (see above specification for details,) append 'SYNC' to part number. Model Number Stability Operating Temperature Range XOPL53100UC XOPL53050UC XOPL53025UC XOPL53100UD XOPL53050UD XOPL53025UD XOPL53100UI XOPL53050UI XOPL53025UI 100 50 25 100 50 25 100 50 25 0 ~ +70C 0 ~ +70C 0 ~ +70C -20 ~ +70C -20 ~ +70C -20 ~ +70C -40 ~ +85C -40 ~ +85C -40 ~ +85C EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: info@euroquartz.co.uk www.euroquartz.co.uk