100364QIX - Fairchild Semiconductor

Februa ry 199 0

Revised August 2000

100364 Low Power 16-Input Multiplexer

100364

Low Power 16-Input Multiplexer

General Description

The 10036 4 is a 16-inpu t multiplexer. Data paths ar e con-

trolled by four Select lines (S0–S3). Their decoding is

shown in the Truth Table. Output data polarity is the same

as the selected inp ut d ata . All inputs ha ve 50 kΩ pull-down

resistors.

Features

■35% power reduction of the 100164

■2000V ESD protection

■Pin/function compatible with 100164

■Voltage compensated operating range = −4.2V to −5.7V

■Available to industrial grade temperature range

Ordering Code:

Devices also available in Tape and R eel. Spe ci fy by append ing the suffix let t er “X” to the ordering code.

Logic Symbol

Pin Descriptions

Connection Diagrams

24- Pin DIP

28-Pin PL CC

Order Number Package Number Package Description

100364PC N24E 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide

100364QC V28A 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square

100364QI V28A 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square

Industrial Temperature Range (−40°C to +85°C)

Pin Names Description

I0–I15 Data Inputs

S0–S3Select Inputs

Z Data Output

www.fairchildsemi.com 2

100364

Truth Table

H = HIGH Voltage Le ve l

L = LOW Voltage Level

Logic Diagram

Select Inputs Output

S0S1S2S3Z

LLLLI

HLLLI

LHLLI

HHLLI

LLHLI

HLHLI

LHHLI

HHHLI

LLLHI

HLLHI

LHLHI

HHLHI

LLHHI

HLHHI

LHHHI

HHHHI

3 www.fairchildsemi.com

100364

Absolute Maximum Ratings(Note 1) Recommended Operating

Conditions

Note 1: The “A bsolute Maximum Ratings” are those value s beyond whic h

the saf ety of the device cannot be gu aranteed. Th e device shou ld not be

operated at these limits. The parametric values defined in the Electrical

Characteristics tables are not guaranteed at the absolute maximum rating.

The “R ecomm ended Ope rating Co ndition s” table will define the condit ions

for actu al device operation.

Note 2: ESD testing conforms to MIL-STD-883, Method 3015.

Commercial Version

DC Electrical Characteristics (N ote 3)

VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = 0°C to +85°C

Note 3: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional

noise immunity an d gu ardband ing c an be achi eved by d ecre asin g the al l owable syste m operating ranges. Conditi ons fo r t estin g shown i n the tables are cho-

sen to guarante e operate under “worst case” condit ions.

DIP AC Electrical Characteristics

VEE = −4.2V to −5.7V, VCC = VCCA = GND

Storage Temperature (TSTG)−65°C to +150°C

Maximum Junction Temperature (TJ)+150°C

Pin Potential to Ground Pin (VEE)−7.0V to +0.5V

Input Voltage (DC) VEE to +0.5V

Output Current

(DC Output HIGH) −50 mA

ESD (Note 2) ≥ 2000V

Case Temperature (TC)

Commercial 0°C to +85°C

Industrial −40°C to +85°C

Supply Voltage (VEE)−5.7V to −4.2V

Symbol Parameter Min Typ Max Units Conditions

VOH Output HIGH Voltage −1025 −955 −870 mV VIN = VIH (Max) Loading with

VOL Output LOW Voltage −1830 −1705 −1620 mV or VIL (Min) 50Ω to −2.0V

VOHC Output HIGH Voltage −1035 mV VIN = VIH (Min) Loading with

VOLC Output LOW Voltage −1610 mV or VIL (Max) 50Ω to −2.0V

VIH Input HIGH V olta ge −1165 −870 mV Guaranteed HIGH Signal

for All Inputs

VIL Input LOW V olta ge −1830 −1475 mV Guaranteed LOW Signal

for All Inputs

IIL Input LOW Current 0.5 µAV

IN = VIL (Min)

IIH Input HIGH Current 300 µAV

IN = VIH (Max)

IEE Power Supply Current −89 −45 mA Inputs OPEN

Symbol Parameter TC = 0°CT

C = +25°CT

C = +85°CUnits Conditions

Min Max Min Max Min Max

tPLH Propagation Delay 0.90 2.00 0.90 2.00 0.90 2.10 ns

tPHL I0–I15 to Output

tPLH Propagation Delay 1.40 2.80 1.40 2.80 1.50 2.90 ns

tPHL S0, S1 to Output Figures 1, 2

tPLH Propagation Delay 1.00 2.20 1.00 2.20 1.10 2.40 ns

tPHL S2, S3 to Output

tTLH Transition Time 0.35 1.20 0.35 1.20 0.35 1.20 ns

tTHL 20% to 80%, 80% to 20%

www.fairchildsemi.com 4

100364

Commercial Version (Continued)

PLCC AC Electrical Characteristics

VEE = −4.2V to −5.7V, VCC = VCCA = GND

Industrial Version

PLCC DC Electrical Characteristics (Note 4)

VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = −40°C to +85°C

Note 4: The specified limits represe nt the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional

noise immunity and guard bandi ng can be achi ev ed by decre asin g t he all owable syste m op era ti ng r anges. Co ndi ti ons fo r t est ing shown in the ta ble s are cho-

sen to guarant ee opera t ion under “worst case” conditions .

PLCC AC Electrical Characteristics

VEE = −4.2V to −5.7V, VCC = VCCA = GND

Symbol Parameter TC = 0°CT

C = +25°CT

C = +85°CUnits Conditions

Min Max Min Max Min Max

tPLH Propagation Delay 0.90 1.80 0.90 1.80 0.90 1.90 ns

Figures 1, 2

tPHL I0–I15 to Output

tPLH Propagation Delay 1.40 2.60 1.40 2.60 1.50 2.70 ns

tPHL S0, S1 to Output

tPLH Propagation Delay 1.00 2.00 1.00 2.00 1.10 2.20 ns

tPHL S2, S3 to Output

tTLH Transition Time 0.35 1.10 0.35 1.10 0.35 1.10 ns

tTHL 20% to 80%, 80% to 20%

Symbol Parameter TC = −40°CT

C = 0°C to +85°CUnits Conditions

Min Max Min Max

VOH Output HIGH Voltage −1085 −870 −1025 −870 mV VIN = VIH (Max) Loading with

VOL Output LOW Voltage −1830 −1575 −1830 −1620 mV or VIL (Min) 50Ω to −2.0V

VOHC Output HIGH Voltage −1095 −1035 mV VIN = VIH (Min) Loading with

VOLC Output LOW Voltage −1565 −1610 mV or VIL (Max) 50Ω to −2.0V

VIH Input HIGH Voltage −1170 −870 −1165 −870 mV Guaranteed HIGH Signal for All Inputs

VIL Input LOW Voltage −1830 −1480 −1830 −1475 mV Guaranteed LOW Signal for All Inputs

IIL Input LOW Current 0.5 0.5 µA VIN = VIL (Min)

IIH Input HIGH Current 325 325 µA VIN = VIH (Max)

IEE Power Supply Current −89 −45 −89 −45 mA Inputs OPEN

Symbol Parameter TC = −40°CT

C = +25°CT

C = +85°CUnits Conditions

Min Max Min Max Min Max

tPLH Propagation Delay 0.90 1.80 0.90 1.80 0.90 1.90 ns

Figures 1, 2

tPHL I0–I15 to Output

tPLH Propagation Delay 1.20 2.60 1.40 2.60 1.50 2.70 ns

tPHL S0, S1 to Output

tPLH Propagation Delay 0.80 2.10 1.00 2.00 1.10 2.20 ns

tPHL S2, S3 to Output

tTLH Transition Time 0.20 1.20 0.35 1.10 0.35 1.10 ns

tTHL 20% to 80%, 80% to 20%

5 www.fairchildsemi.com

100364

Test Circuit

Note:

VCC, VCCA = +2V , VEE = −2.5V

L1 and L2 = Equal length 50Ω impedance lines

RT = 50Ω terminator internal to scope

Decoupling 0. 1 µF from GND to VCC and VEE

All unused outputs are loaded with 50Ω to GND

CL = Fixture and stray capacitance ≤ 3 pF

FIGURE 1. AC Test Circuit

Switching Waveforms

FIGURE 2. Propagation Delay and Transition Times

www.fairchildsemi.com 6

100364

Physical Dimensions inches (millimeters) unless otherwise noted

24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide

Package Number N24E

7 www.fairchildsemi.com

100364 Low Power 16-Input Multiplexer

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square

Package Number V28A

Fairchild does not assume an y responsibility fo r use of any circuitry described, no circuit patent licenses are implied and

Fairchild reserves the right at any time without notice to change said circuitry and specifications.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD

SEMICONDUCTOR CORPORATION. As used herein:

1. Life suppor t de vices o r syst ems are dev ic es or syste ms

which, (a) are intended for surgical implant into the

body, or (b) support or sustain life, and (c) whose failure

to perform when properly used in accordance with

instruct ions fo r use pr ovi de d in the l abe ling, can be rea-

sonably expected to result in a significant injury to the

user.

2. A crit ical componen t in any com ponen t of a life s uppor t

device or system whose failure to perform can be rea-

sonabl y e xpec ted to cause th e fa i lure of the l ife s upport

device or system, or to affect its safety or effectiveness.