3 www.fairchildsemi.com
100364
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions
Note 1: The “A bsolute Maximum Ratings” are those value s beyond whic h
the saf ety of the device cannot be gu aranteed. Th e device shou ld not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum rating.
The “R ecomm ended Ope rating Co ndition s” table will define the condit ions
for actu al device operation.
Note 2: ESD testing conforms to MIL-STD-883, Method 3015.
Commercial Version
DC Electrical Characteristics (N ote 3)
VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = 0°C to +85°C
Note 3: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional
noise immunity an d gu ardband ing c an be achi eved by d ecre asin g the al l owable syste m operating ranges. Conditi ons fo r t estin g shown i n the tables are cho-
sen to guarante e operate under “worst case” condit ions.
DIP AC Electrical Characteristics
VEE = −4.2V to −5.7V, VCC = VCCA = GND
Storage Temperature (TSTG)−65°C to +150°C
Maximum Junction Temperature (TJ)+150°C
Pin Potential to Ground Pin (VEE)−7.0V to +0.5V
Input Voltage (DC) VEE to +0.5V
Output Current
(DC Output HIGH) −50 mA
ESD (Note 2) ≥ 2000V
Case Temperature (TC)
Commercial 0°C to +85°C
Industrial −40°C to +85°C
Supply Voltage (VEE)−5.7V to −4.2V
Symbol Parameter Min Typ Max Units Conditions
VOH Output HIGH Voltage −1025 −955 −870 mV VIN = VIH (Max) Loading with
VOL Output LOW Voltage −1830 −1705 −1620 mV or VIL (Min) 50Ω to −2.0V
VOHC Output HIGH Voltage −1035 mV VIN = VIH (Min) Loading with
VOLC Output LOW Voltage −1610 mV or VIL (Max) 50Ω to −2.0V
VIH Input HIGH V olta ge −1165 −870 mV Guaranteed HIGH Signal
for All Inputs
VIL Input LOW V olta ge −1830 −1475 mV Guaranteed LOW Signal
for All Inputs
IIL Input LOW Current 0.5 µAV
IN = VIL (Min)
IIH Input HIGH Current 300 µAV
IN = VIH (Max)
IEE Power Supply Current −89 −45 mA Inputs OPEN
Symbol Parameter TC = 0°CT
C = +25°CT
C = +85°CUnits Conditions
Min Max Min Max Min Max
tPLH Propagation Delay 0.90 2.00 0.90 2.00 0.90 2.10 ns
tPHL I0–I15 to Output
tPLH Propagation Delay 1.40 2.80 1.40 2.80 1.50 2.90 ns
tPHL S0, S1 to Output Figures 1, 2
tPLH Propagation Delay 1.00 2.20 1.00 2.20 1.10 2.40 ns
tPHL S2, S3 to Output
tTLH Transition Time 0.35 1.20 0.35 1.20 0.35 1.20 ns
tTHL 20% to 80%, 80% to 20%