T-1 (3mm) BLINKING LED LAMP Part Number: L-36BSRD-B Super Bright Red Features Description z T-1 package with rectangular base. The Super Bright Red source color devices are made with z With built-in blinking IC. Gallium Aluminum Arsenide Red Light Emitting Diode. z Operation voltage from 3.5V to 14V. z Blinking frequency from 3.0Hz to 1.5Hz. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB6590 REV NO: V.8A DATE: APR/03/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003793 Selection Guide Part No. Dice L-36BSRD-B Iv (mcd) V= 9V Lens Type Super Bright Red (GaAlAs) Red Diffused Viewing Angle [1] Min. Typ. 120 320 *40 *100 21/2 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Min. peak Peak Wavelength Super Bright Red 655 nm D Dominant Wavelength Super Bright Red 640 nm 1/2 Spectral Line Half-width Super Bright Red 20 nm IF Forward Current Super Bright Red 22 mA Min:VF=3.5V Typ:VF=5V ISON Supply Current Super Bright Red 8 mA VF=3.5V ISON Supply Current Super Bright Red 44 mA VF=14V f Blink Frequency Super Bright Red Hz VF=3.5V~14V 8 Typ. Max. 1.5 3 Units Test Conditions Note: 1.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation 310 mW Forward Voltage 14 V Reverse Voltage 0.5 V Operating Temperature -40C To +70C Storage Temperature -40C To +85C Lead Solder Temperature [1] 260C For 3 Seconds Lead Solder Temperature [2] 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAB6590 REV NO: V.8A DATE: APR/03/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003793 Super Bright Red L-36BSRD-B SPEC NO: DSAB6590 REV NO: V.8A DATE: APR/03/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003793 PACKING & LABEL SPECIFICATIONS L-36BSRD-B SPEC NO: DSAB6590 REV NO: V.8A DATE: APR/03/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003793 SPEC NO: DSAB6590 REV NO: V.8A DATE: APR/03/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003793 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAB6590 REV NO: V.8A DATE: APR/03/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003793