SPEC NO: DSAB6590 REV NO: V.8A DATE: APR/03/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003793
T-1 (3mm) BLINKING LED LAMP
Part Number: L-36BSRD-B Super Bright Red
Features
zT-1 package with rectangular base.
zWith built-in blinking IC.
zOperation voltage from 3.5V to 14V.
zBlinking frequency from 3.0Hz to 1.5Hz.
zRoHS compliant.
Description
The Super Bright Red source color devices are made with
Gallium Aluminum Arsenide Red Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAB6590 REV NO: V.8A DATE: APR/03/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003793
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. 2mm below package base.
2. 5mm below package base.
Part No. Dice Lens Type
Iv (mcd)
V= 9V
V
iewing
Angle [1]
Min. Typ. 2θ1/2
L-36BSRD-B Super Bright Red (GaAlAs) Red Diffused
120 320
*40 *100 60°
Symbol Parameter Device Min. Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Red 655 nm
λD Dominant Wavelength Super Bright Red 640 nm
Δλ1/2 Spectral Line Half-width Super Bright Red 20 nm
IF Forward Current Super Bright Red 8 22 mA Min:VF=3.5V
Typ:VF=5V
ISON Supply Current Super Bright Red 8 mA VF=3.5V
ISON Supply Current Super Bright Red 44 mA VF=14V
f Blink Frequency Super Bright Red 1.5 3 Hz VF=3.5V~14V
Parameter Super Bright Red Units
Power dissipation 310 mW
Forward Voltage 14 V
Reverse Voltage 0.5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Lead Solder Temperature [2] 260°C For 5 Seconds
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Note:
1.Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAB6590 REV NO: V.8A DATE: APR/03/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003793
Super Bright Red L-36BSRD-B
SPEC NO: DSAB6590 REV NO: V.8A DATE: APR/03/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003793
PACKING & LABEL SPECIFICATIONS L-36BSRD-B
SPEC NO: DSAB6590 REV NO: V.8A DATE: APR/03/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003793
SPEC NO: DSAB6590 REV NO: V.8A DATE: APR/03/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003793
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
