RP08-2415SAW/SMD - RECOM Power

Features

Regulated

Converters

• 4:1 Wide Input Voltage Range

• 1.6kVDC Isolation

• UL, EN50155 Certiﬁed

• Efﬁciency to 88%

• Protected Outputs

• High Input Voltage Range (110VDC)

PD-1

REV.: 2/2016www.recom-power.com

DC/DC Converter

Description

The RP08-AW series wide range input DC/DC converters are certiﬁed to UL 60950-1 and cUL 60950-1.

This makes them ideal for all telecom and industrial applications where approved safety standards are

required. The 24V and 110VDC input versions have been especially designed for railway applications.

The DIP24 package is available in both pinned and SMD case styles and meets military standards for

thermal shock and vibration tolerance.

E196683

8 Watt

DIP24/SMD

Single & Dual

Output

RP08-AW

Selection Guide

Part Number Input Output Output Input(1) Efﬁciency(1) Max. Capacitive

Voltage Range Voltage Current Current typ. Load(2)

[VDC] [VDC] [mA] [mA] [%] [µF]

RP08-243.3SAW(3) 9-36 3.3 2400 388 85 1330

RP08-2405SAW(3) 9-36 5 1600 383 87 1330

RP08-2412SAW(3) 9-36 12 666 387 86 288

RP08-2415SAW(3) 9-36 15 533 387 86 200

RP08-483.3SAW(3) 18-75 3.3 2400 194 85 1330

RP08-4805SAW(3) 18-75 5 1600 192 87 1330

RP08-4812SAW(3) 18-75 12 666 191 87 288

RP08-4815SAW(3) 18-75 15 533 189 88 200

RP08-1103.3SAW(3) 43-160 3.3 2400 86 84 1330

RP08-11005SAW(3) 43-160 5 1600 86 85 1330

RP08-11012SAW(3) 43-160 12 666 84 86 288

RP08-11015SAW(3) 43-160 15 533 85 86 200

RP08-2405DAW(3) 9-36 ±5 ±800 397 84 ±900

RP08-2412DAW(3) 9-36 ±12 ±333 387 86 ±133

RP08-2415DAW(3) 9-36 ±15 ±267 388 86 ±90

RP08-4805DAW(3) 18-75 ±5 ±800 198 84 ±900

RP08-4812DAW(3) 18-75 ±12 ±333 191 87 ±133

RP08-4815DAW(3) 18-75 ±15 ±267 192 87 ±90

RP08-11005DAW(3) 43-160 ±5 ±800 89 82 ±900

RP08-11012DAW(3) 43-160 ±12 ±333 85 85 ±133

RP08-11015DAW(3) 43-160 ±15 ±267 86 85 ±90

UL60950-1 Certiﬁed

EN50155 Certiﬁed

Input Voltage

Output Voltage

Single or Dual

RP08-__ __ _AW/_

Package(3)

Model Numbering

Ordering Examples

RP08-4805AW/SMD = 48V Input, 5V Output, SMD Package

RP08-2405AW = 24V Input, 5V Output, DIP24 Package

Notes:

Note3: No sufﬁx for standard package (DIP24), add sufﬁx “SMD” for SMD package

Notes:

Note1: Maximum value at nominal input voltage and full load

Note2: Test by minimum Vin and constant resistor load.

BASIC CHARACTERISTICS

Parameter Condition Min. Typ. Max.

Input Voltage Range

nom. Vin = 24V

nom. Vin = 48V

nom. Vin = 110V

9VDVC

18VDC

43VDC

24VDC

48VDC

110VDC

36VDC

75VDC

160VDC

Under Voltage Lockout (UVLO)

Vin= 24V DC-DC ON

DC-DC OFF 8VDC

9VDC

Vin= 48V DC-DC ON

DC-DC OFF 16VDC

18VDC

Vin=110V DC-DC ON

DC-DC OFF 40VDC

43VDC

Input Filter Pi-Type

Input reﬂected Ripple Current nominal Vin and full load 20mAp-p

Input Surge Voltage

Vin = 24V, 100ms max.

Vin = 48V, 100ms max.

Vin = 110V, 100ms max.

50VDC

100VDC

170VDC

Start-up time Power up

Remote ON/OFF

450ms

5ms

Operating Frequency Range 270kHz 300kHz 330kHz

Minimum Load 0%

Ripple and Noise 20MHz bandwidth

Vin = 24V

Vin = 48V

Vin = 110V

50mVp-p

75mVp-p

Remote ON/OFF(4) Positive Logic DC-DC ON

DC-DC OFF

Open or 3.0 < Vr < 12VDC

Short or 0 < Vr < 1.2VDC

Input current of Remote pin (CTRL) DC-DC OFF 2.5mA

DC-DC ON -0.5mA +0.5mA

continued on next page

PD-2 REV.: 2/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP08-AW

Series

Notes:

Note4: The ON/OFF control pin voltage is referenced to -Vin pin.

Efﬁciency vs. Output Current Efﬁciency vs. Input Voltage

Efficiency [%]

Input Voltage [VDC]

15 18 24 30 3612 21 27 33

Efficiency [%]

Output Current [%]

20 40 60 80 10030 50 70 90

9Vin

24Vin

36Vin

RP08-2405SAW

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

REGULATIONS

Parameter Condition Value

Output Voltage Accuracy ±1%

Line Voltage Regulation low line to high line, full load ±0.2%

Load Voltage Regulation

no load to full load

DIP24 Single

Dual

±0.5%

±1%

SMD Single

Dual

±1%

10% load to 90% load

DIP24 Single

Dual

±0.3%

±0.8%

SMD Single

Dual

±0.8%

Cross Regulation asymmetrical 25%<>100% load ±5%

Transient Response recovery time 25% load step change 250μs typ.

RP08-AW

Series

PD-3

REV.: 2/2016www.recom-power.com

Efﬁciency vs. Output Current

Efﬁciency vs. Input Voltage

Efficiency [%]

Input Voltage [VDC]

30 36 48 60 757224 42 54 66

Efficiency [%]

Input Voltage [VDC]

67 79 103 139 16055 91 127115 151

18Vin

48Vin

75Vin

Efficiency [%]

Output Current [%]

20 40 60 80 10030 50 70 90

43Vin

110Vin

160Vin

Efficiency [%]

Output Current [%]

20 40 60 80 10030 50 70 90

RP08-4805SAW

RP08-11005SAW

ENVIRONMENTAL

Parameter Condition

Value

Operating Temperature Range(6) without derating

with derating

-40°C to +85°C

-40°C to +105°C

Maximum Case Temperature +105°C

Temperature Coefﬁcient ±0.02%/°C max.

Thermal Impedance Natural convection (20LFM) 20°C/Watt

Operating Humidity non-condensing 5% - 95% RH

Shock MIL-STD-810F

Thermal Shock MIL-STD-810F

Vibration MIL-STD-810F

MTBF MIL-HDBK-217F

Bellcore-TR-NWT-000332(7)

2832 x 103 hours

2350 x 103 hours

-40 60 85

10040

200-20

100

Ambient Temperature [°C]

Output Power [%]

120

105

PD-4 REV.: 2/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP08-AW

Series

Derating Graph(8) RP08-4805SAW

Notes:

Note6: Converter can meet the railway T2 and TX temperature requirement

Note7: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground Benign and controlled environment).

MIL-HDBK-217F, Notice 2, Full Load, 25°C, Ground Benign.

Note8: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-

number not shown here please contact our technical support service at techsupportAT@recom-power.com.

PROTECTIONS

Parameter Condition Value

Short Circuit Protection (SCP) continuous, automatic recovery

Over Voltage Protection (OVP) Single Output

3.3Vout

5Vout

12Vout

15Vout

3.9VDC typ.

6.2VDC typ.

15VDC typ.

18VDC typ.

Over Load Protection (OLP) % of Iout rated 150% typ.

Isolation Voltage

DIP24 I/P to O/P

I/P (O/P) to case

1.6kVDC/1 minute

SMD I/P to O/P

I/P (O/P) to case

1.6kVDC/1 minute

1.0kVDC/1 minute

Isolation Resistance 500VDC 1GΩ min.

Isolation Capacitance 1500pF max.

Notes:

Note5: This power module is not internally fused. An input line fuse must always be used.

SAFETY AND CERTIFICATIONS

Certiﬁcate Type (Safety) Report / File Number Standard

UL General Safety E196683 UL60950-1 1st Ed.: 2003

C22.2 No. 60950 1st. Ed.: 2003

Railway 15A100701E-C EN50155

EMC Compliance Condition Standard / Criterion

EMI Standard(9) with external ﬁlter EN55022, EN55011, Class A or B

ESD

Radiated Immunity

Fast Transient(10)

Surge(10)

Conducted Immunity

Air ±8kV and Contact ± 6kV

20 V/m

±2kV

10 Vr.m.s

EN61000-4-2, Criteria A

EN61000-4-3, Criteria A

EN61000-4-4, Criteria A

EN61000-4-5, Criteria A

EN61000-4-6, Criteria A

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP08-AW

Series

PD-5

REV.: 2/2016www.recom-power.com

Notes:

Note9: The standard modules meet EMI Class A or Class B with external components, see ﬁlter suggestions below.

Note10: An external input ﬁlter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.

Recom suggests Nippon chemi-con KY series 220μF/100V (24V and 48V) or 150μF/200V (110V).

EMI Filtering Class A

Input

Fuse

+VIN

+VOUT

-VOUT

-VIN

LOAD

Fuse

+VIN

+VOUT

COM

-VOUT

-VIN

LOADLOAD

Input

Fuse

+VIN

+VOUT

-VOUT

-VIN

LOAD

Fuse

+VIN

+VOUT

COM

-VOUT

-VIN

LOADLOAD

MODEL C1 C2 C3/C4

RP08-24xxS_DW

RP08-24xxS_DW/SMD

1.0μF/50V

1210MLCC N/A 1000pF/2kV

1206 MLCC

RP08-48xxS_DW

RP08-48xxS_DW/SMD

0.47μF/100V

1810MLCC N/A 1000pF/2kV

1206 MLCC

RP08-110xxS_DW

RP08-110xxS_DW/SMD

1μF/250V

1812 MLCC

1μF/250V

1812 MLCC

1000pF/2kV

1206 MLCC

EMI Filtering Class B

Input

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

LOAD

+VOUT

COM

-VOUT

LOADLOAD

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

Input

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

LOAD

+VOUT

COM

-VOUT

LOADLOAD

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

MODEL C1 C2 C3/C4 C5 L1

RP08-24xxS_DW

RP08-24xxS_DW/SMD

4.7μF/50V

1812 MLCC N/A 1000pF/2kV

1206 MLCC N/A

CMC: 325μH

ref.: WE 744290321

ref.: CMC-06

RP08-48xxS_DW

RP08-48xxS_DW/SMD

1.5μF/100V

1812 MLCC

1.5μF/100V

1812 MLCC

1000pF/2kV

1206 MLCC N/A

CMC: 325μH

ref.: WE 744290321

ref.: CMC-06

RP08-110xxS_DW

RP08-110xxS_DW/SMD

1μF/250V

1812 MLCC N/A 1000pF/2kV

1206 MLCC

22μF/200V

Al Cap. (lie down)

Chemi-con KMF

CMC: 497μH

ref.: WE 7448013501

PD-6 REV.: 2/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP08-AW

Series

DIMENSIONS and PHYSICAL CHARACTERISTICS

Parameter Type Value

Material

Case

Base

Potting

Nickel coated copper

Non-conductive black plastic

Epoxy (UL94-V0)

Package Dimensions (LxWxH) DIP

SMD

31.8 x 20.3 x 10.3mm

32.0 x 21.3 x 10.9mm

Package Weight DIP

SMD

18g

20g

DIP24 Dimension Drawing (mm)

Pin Connections

Pin # Single Dual

1 Ctrl Ctrl

2 -Vin -Vin

3 -Vin -Vin

9 NC Com

11 NC -Vout

14 +Vout +Vout

16 -Vout Com

22 +Vin +Vin

23 +Vin +Vin

Pin Pitch Tolerance ±0.25mm

Pin dimension tolerance ±0.1mm

XX.X ± 0.5mm

XX.XX ± 0.25mm

NC = No Connection

20.3

3.8

10.2

31.8

Ø 0.5

20.32

2.0

2 3

Bottom View

9 11

23 22 16 14

5.08 15.20

2.54

SMD Dimension Drawing (mm)

10.9

11.2

20.3

2.54

0.50 1.60

2.40

32.0

10.16

27.94

25.4

2.54

1.0 x 0.50

1 4 5 9 10 11 1232

24 21 20

Bottom View Top View

16 15 14 132223

Pin area

Pin Connections

Pin # Single Dual

1 Ctrl Ctrl

2 -Vin -Vin

3 -Vin -Vin

9 NC Com

11 NC -Vout

14 +Vout +Vout

16 -Vout Com

22 +Vin +Vin

23 +Vin +Vin

Others NC NC

Pin Pitch Tolerance ±0.25mm

Pin dimension tolerance ±0.1mm

XX.X ± 0.5mm

XX.XX ± 0.25mm

NC = No Connection

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP08-AW

Series

PD-7

REV.: 2/2016www.recom-power.com

PACKAGING INFORMATION

Parameter Type Value

Packaging Quantity 7pcs.

Storage Temperature Range -55°C to +125°C

Storage Humidity 5% - 95% RH

The product information and speciﬁcations are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written

consent. A safety-critical application is deﬁned as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inﬂict bodily harm or damage property. The buyer

shall indemnify and hold harmless RECOM, its afﬁliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

RECOM:

RP08-2405DAW RP08-2405DAW/SMD RP08-2405SAW RP08-2405SAW/SMD RP08-2412DAW RP08-

2412DAW/SMD RP08-2412SAW RP08-2412SAW/SMD RP08-2415DAW RP08-2415DAW/SMD RP08-2415SAW

RP08-2415SAW/SMD RP08-243.3SAW RP08-243.3SAW/SMD RP08-4805DAW RP08-4805DAW/SMD RP08-

4805SAW RP08-4805SAW/SMD RP08-4812DAW RP08-4812DAW/SMD RP08-4812SAW RP08-4812SAW/SMD

RP08-4815DAW RP08-4815DAW/SMD RP08-4815SAW RP08-4815SAW/SMD RP08-483.3SAW RP08-

483.3SAW/SMD