2 of 17
RFSA2013
DS150622
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com.
Absolute Maximum Ratings
Parameter Rating Unit
Supply Voltage (VDD) -0.5 to +6 V
Control Voltage (VC) -0.5 to +6 V
Mode Pin Voltage (MODE) -0.5 to +6 V
RF Input Power +30 dBm
Storage Temperature -65 to +150 °C
Junction Temperature +125 °C
ESD Rating Human Body Model (HBM) 1000 V
Parameter Specification Unit Condition
Min. Typ. Max.
General
Supply Voltage 4.75 5 5.25 V
Supply Current 1 mA
Operating Temperature (RF Input Power
Handling Derates Above 85°C) -40 +105°C
Thermal Resistance 45 °C/W RF input must be RFIN pin
RF Input Power at 85°C 27 dBm RF input must be RFIN pin
RF Performance
Frequency Range 50 6000 MHz
Minimum Insertion Loss 2.6 3.5 dB
Gain Control Range 30 33.2 dB DC to 4GHz
Gain versus Temperature 1.7 dB Peak to peak gain variation over temperature
for fixed control voltage
Return Loss 15 dB
Relative Phase 16.2 Deg Insertion phase at 15dB attenuation relative to
minimum insertion loss
Input 1dB Compression Point 30 dBm
Input IP3 45 50 dBm PIN + (IM3dBC/2)
Input IP2 80 dBm PIN + IM2dBC, IM2 is F1+F2
Input IH2 85 dBm PIN + H2dBC, H2 is second harmonic
Input IH3 55 dBm PIN + (H3dBC/2), H3 is third harmonic
Control
Voltage Control Range, Positive Attenuation
Slope
0.5 4.5 V 4.5V control voltage is lowest insertion loss,
MODE pin high
Voltage Control Range, Negative
Attenuation Slope 0 3.3 V0V control voltage is lowest insertion loss,
MODE pin low
Voltage Control Pin Current (MODE High) 37 A VC Pin at 5V
Voltage Control Pin Current (MODE Low) 24 A VC Pin at 3.3V
MODE Pin Logic Low 0.4 V
MODE Pin Logic High 1 V
Settling Time 15 sec 1dB attenuation change settling within 0.1dB
Note: Typical performance at nominal conditions unless otherwise noted: Supply voltage = 5.0V, Operating temperature = 25°C, RF Frequency
2GHz
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.