Ceramic Disc Capacitors NCD Series Class I TEMPERATURE COMPENSATING AND TEMPERATURE STABLE TYPES (CLASS I) FEATURES * PROVIDES AN ACCURATE, PREDICTABLE LINEAR CAPACITANCE ..CHANGE WITH VARIATIONS IN OPERATING TEMPERATURE * NPO TYPES PROVIDE DRIFT FREE PERFORMANCE * TIGHT TOLERANCES AVAILABLE * AVAILABLE WITH FORMED LEADS AND ON TAPE *See Part Number System for Details SPECIFICATIONS Temperature Characteristics Operating Temperature Range Capacitance Range Standard Tolerance Capacitance Change Over Temperature Range NPO N150 N750 SL 0.5 ~ 470pF 3.0 ~ 27pF 22 ~ 470pF 1% -1 ~ +2% -5% ~ +7.5% Insulation Resistance Temperature Coefficient Working Voltage Range Dielectric Withstanding Voltage (Test Voltage) Cap. Change Load Life Test @ 85C Q Factor (min.) 1,000 Hours I.R. (min.) Test Conditions 060ppm 0.5 ~ 1000pF 5% (J) 3% 5% +5 C B A O -13% ~ +12% PERCENT CHANGE FROM 25OC F E TEMPERATURE +25 +45 +65 +85 (R) NIC COMPONENTS CORP. 500 (C>30pF) 200+10C (<30pF) N1500250ppm N3300500ppm NPO J .1LS TR 50% F Optional Lead Space (LS) and/or Lead Length (LL) in inches Optional Lead Style C = Cut Lead D = Inside Kink (Short Leads) E = Outward Kink (Short Leads) J = Inside Kink (Long Leads) K = Outward Kink (Long Leads) Temperature Coefficient Working Voltage DC D +5 -10% ~ +20% RoHS compliant Optional Packaging TR = Taped and Reel TB = Tape and Box (Ammo) A B C -15 47 ~ 1000pF 8% 15% 30% 50% Shall Confom To Initial Measurements Above 10,000 Megohms <1,000pF; 1MHz, 1.2Vrms Max., >1,000pF; 1KHz, 1.2Vrms Max. A-NPO B-N-150 C-N-330 D-N-750 E-N-1500 F-SL D -35 22 ~ 2200pF 2.5 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum +10 F -55 -5% ~ +9% 1000 (C>30pF) 400+20C (<30pF) Minimum 10,000 Megohms N15060ppm N750120ppm N330500ppm 50Vdc ~ 1KVdc NCD 101 J 500 -10 N3300 -30C ~ +85C Q Factor (Min. 1MHz) -5 N1500 www.niccomp.com Tolerance Code C = 0.25pF K = 10% D = 0.5pF M = 20% J = 5% Z = + 80% / - 20% Capacitance code, expressed in pfd, First two digits are significant, third digit is no. of zeros. "R" indicates decimal for under 10pfd. Series www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 57 Ceramic Disc Capacitors Body Diameter 5 ~ 11 Standard Bulk 6.35 0.8 >12 6.35 0.8 NCD Series Class I Lead Spacing (mm) - S Standard Optional Bulk Optional T&R T&R mm (inches) mm (inches) 5.0 0.8 5.0 0.8 (0.2LS) 2.5 0.8 (0.1LS) 7.5 0.8 (0.295LS) 7.5 0.8 (0.295LS) 5.0 0.8 10.0 0.8 (0.395LS) 10.0 0.8 (0.395LS) Standard Low Voltage 500Vdc & Up 100Vdc & Below 2 max. 3 max. 23 min. 23 min. LEAD DIAMETER 0.6MM IS STANDARD BODY THICKNESS 2 ~ 4MM DEPENDENT ON CV S S K Style J Style D Style E Style 5 max. 5 max. 1.5+0.2 1.5+0.2 5 max. 23 min. 23 min. 1.5+0.2 4.7 + 1 5 max. 1.5+0.2 4.7 + 1 S S S S (BULK ONLY) (BULK AND TAPED STYLES) STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE N150 NPO Cap. (pF) 0.5 ~ 18 20 22 27 33 39 47 56 68 75 82 100 120 150 180 220 270 330 470 560 680 750 820 1000 50 100 6 6 6 6 6 6 6 7 7 7 7 8 8 9 9 10 12 14 16 - 500 1K 6 6 6 6 6 7 7 7 7 7 7 8 8 9 9 10 12 14 16 - 6 6 6 6 7 7 8 8 9 9 9 10 10 12 14 16 16 18 20 - 50 100 6 6 6 7 - 500 1K 6 7 7 8 - 7 8 8 9 - 50 100 6 6 6 6 6 6 7 7 7 7 8 8 9 9 10 12 14 16 - N750 SL Working Voltage (Vdc) 50 500 1K 500 100 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 6 6 6 7 6 6 7 8 6 6 7 8 6 6 7 9 6 6 7 9 6 6 7 9 6 6 8 10 6 6 8 10 6 6 9 12 6 7 9 14 6 7 10 16 7 8 12 16 8 9 14 18 8 10 16 20 9 12 10 12 10 14 12 16 12 16 14 16 N1500 1K 6 6 6 6 6 6 6 6 6 7 7 7 7 8 8 9 10 12 14 14 16 16 16 18 50 100 6 6 6 6 6 6 6 6 6 6 6 6 6 7 8 8 9 10 10 12 12 14 N3300 500 1K 6 6 6 6 6 6 6 6 6 7 7 8 8 9 9 10 12 14 14 16 16 16 6 6 6 6 6 6 6 7 7 7 7 8 8 9 10 12 14 14 16 16 16 18 50 100 6 6 6 6 6 7 7 7 7 8 8 8 8 10 500 1K 6 6 6 6 6 6 6 6 7 7 7 7 8 9 10 10 10 12 6 6 6 6 6 6 7 7 7 7 8 9 11 11 11 11 13 NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON CERTAIN VALUES (R) 58 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Ceramic Disc Capacitors DIMENSIONS (mm) Taping Specifications h P P2 T D P1 H1 S H L W d P0 Diameters up to 22mm max. are available on tape. P2 P D D T = 2 ~ 7mm DEPENDENT ON T.C. AND CV S H1 P1 H H0 L t W d P0 Symbol D max. d P* P0 Value 12.0 22.0 0.6 12.7 25.4 12.7 Tolerance --- +0.06 1.0 -0.05 0.2 P1 5.1 3.85 3.18 2.6 0.7 D P2 6.35 1.0 S 2.5 5.0 6.35 7.5 0.8 -0.2 H H0 H1 D W L t h 20.0 16.0 Max. 32.25 4.0 18.0 Max. 11.00 0.7 0 +1.5 -1.0 0.5 --- 0.2 0.5 --- 0.2 2.0 * -Dimension "P" is 12.7mm, for diameters up to 12mm, and 25.4mm for diameters 13-22mm. AMMO PACK H H 372 (14.64") L 377 (14.84") W 55 (2.16") REEL B L W D W Acceptable to standard radial type cartridge. D< = 354 (13.93") > B = 21 (.83") but < 30 (1.18") = W< = 55 (2.16") Acceptable to standard radial type cartridge with a few extra accessories. (R) NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 65