TOOL-LESS MODULAR MULTIPIN CONNECTOR
Quick Multipin
Series
COMPANY PROFILE
Radiall was founded in 1952 as a family owned company making coaxial plugs for
the television industry. Today, Radiall is an international and global manufacturer
of interconnect components including RF coaxial connectors, cable assemblies,
antennas, ber optic and microwave components, and multipin connectors.
Radiall serves the Aerospace, Automotive, Defense, Industrial, Medical, Space, and
Telecommunication industries.
QSE (Quality Safety Environment) POLICY
Radiall maintains a quality management system that is highly recognized by it’s customers because it conforms
to most international standards, including those for environmental protection.
Since 1994, all Radiall sites are ISO9001 certied. As a result of Radiall’s
continuous improvement efforts, some dedicated activities are certied
to either AS9100, or TS 16949 or ISO14001. Certain product lines are
MIL ESA/SCC Qualied products.
Radiall also complies with other industry directives such as RoHS for
hazardous substance restrictions and EuP for environmentally friendly
designs for energy-consuming products.
A WORLDWIDE ENGINEERING & MANUFACTURING CAPABILITY
With expertise centers and manufacturing locations in 3 continents and
12 industrial sites, Radiall offers it’s customers the proximity needed to
provide the best quality, service and delivery performance.
Our facilities feature state of the art equipment for the many technologies
involved in the design, manufacturing and assembly of interconnect
solutions. Manufacturing plants based in low cost countries give
Radiall the opportunity to offer quality at competitive prices.
Technical information and sales contacts are available at : www.radiall.com
2
www.radiall.com
QM® SERIES
www.radiall.com
www.radiall.com
3
www.radiall.com
Introduction ................................................................................................................................................................................................................................................................................................................................. 4
Application ..................................................................................................................................................................................................................................................................................................................................... 5
Product overview .................................................................................................................................................................................................................................................................................................................... 5
Electrical characteristics ................................................................................................................................................................................................................................................................................................. 6
Mechanical and environmental characteristics .......................................................................................................................................................................................................................................... 7
Inserts part number .............................................................................................................................................................................................................................................................................................................. 8
Inserts layouts ........................................................................................................................................................................................................................................................................................................................... 9
Inserts table ................................................................................................................................................................................................................................................................................................................................. 10
Shell part number .................................................................................................................................................................................................................................................................................................................... 11
Connector dimensions ........................................................................................................................................................................................................................................................................................................... 11
Mounting device part number ...................................................................................................................................................................................................................................................................................... 12
Mounting device dimensions ......................................................................................................................................................................................................................................................................................... 13
Polarization code ...................................................................................................................................................................................................................................................................................................................... 14
CONTACTS PART NUMBERS
Crimp Contacts.......................................................................................................................................................................................................................................................................................................... 15
Coaxial Crimp Contacts ..................................................................................................................................................................................................................................................................................... 16
Twinax Contacts ....................................................................................................................................................................................................................................................................................................... 17
Quadrax Contacts ...................................................................................................................................................................................................................................................................................................18
BMA contacts .............................................................................................................................................................................................................................................................................................................. 18
Luxcis ber optic termini inserts and contacts ............................................................................................................................................................................................................................................. 19
Tooling and accessories ....................................................................................................................................................................................................................................................................................................... 20
Products range extensions ................................................................................................................................................................................................................................................................................................21
Part numbers index ................................................................................................................................................................................................................................................................................................................... 22

Page
QM® SERIES
4
www.radiall.com
QM® SERIES
www.radiall.com


Radiall QM® series connectors have been designed for use with in-line disconnect applications on commercial airplanes.
QM connectors offer outstanding electrical performance and are designed with environmental and mechanical
characteristics that provide for long lasting durability needed for the most sever aerospace applications.
The QM® series offer a wide range of inserts solutions and a large variety of contacts.

Light Weight
Click to install Push to lock
High conductive rails
Perfect, clean
and efcient
Exceptional quality
User friendly - no tool needed
www.radiall.com
5
www.radiall.com
QM® SERIES


Interconnect solution for aerospace and harsh environment applications.
View of receptacle and plug connectors on rail
Notes
(1) Please refer to our user manual MIIN1700000 to have detailed
mounting instructions of the QM on the rail.
(2) EMI backshell and ground block are not compatible
Option EMI backshell (2)
The plug mates
and locks onto
the receptacle (1)
Insert
The receptacle is
xed on the rail (1)
Integrated strain relief
Polarization Devices
Option grounding block (2)
6
www.radiall.com
QM® SERIES
www.radiall.com

Contacts are per EN3155-76 and EN3155-77. Electrical characteristics conform to SAE AS 39029 (MIL-C-39029 type A).

Contact with wire size Max Current Amps
Contact to contact Contact + AWG20 7.5
Contact to mounting surface Contact + AWG20 7.5

Contact size Wire size Max Current Amps
AWG22 5
22 AWG24 3
AWG26 2
20
AWG20 7.5
AWG22 5
AWG24 3
16
AWG16 13
AWG18 10
AWG20 7.5
12
AWG12 23
AWG14 17
AWG16 13
8AWG8 46
AWG10 33
5AWG8 46 — See note 1
AWG10 33
Note 1: Size 5 contacts are not part of SAE AS 39029 (MIL-C-39029 type A). They are qualied by Radiall to 46 Amps.

Frequency (MHz) Leakage attenuation (dB)
100 65
200 63
300 61
400 59
500 58


Level Environmental inserts Voltage (VRMS) Non-environmental voltage (VRMS)
Sea level 1500 1500
50 000 feet 800 600
70 000 feet 800 300

Temperature Insulation resistance
Ambient temperature > 5000 M Ω
155°C (+347°F) >200 M Ω

• Shell to shell conductivity < 2.5 m Ω, operating voltage: 400 Vrms or 500 Vdc at sea level.
• Voltage stability (ground block): Maximum variation 4mV SAE AS 81714 (MIL-T-81714).
• Magnetic permeability < 2 µ and comparative tracking index = 250 V.
www.radiall.com
7
www.radiall.com
QM® SERIES


 up to 50 cycles

Shell type Material
Vibration Shock
for 5 hours in each of the 3 axis/interruption
< 1µs EIA 364-28 three shocks in each axis EIA 364-27
(MIL-STD-1344 /Method 2004.1) condition A
(MIL-STD-1344 /Method 2005.1)
QM Composite
4 positions rail = Acceleration 13,8 Grms 0,2G²/Hz
from 10 to 400HZ and 0,03G²/hz from 400 to 2000Hz
4 positions rail = Shock amplitude
50g / duration 11ms
22 positions rails = Acceleration 6,2 Grms
0.04 g²/Hz from 10 to 400 Hz 0.006 g²/Hz at 2000 Hz
22 positions rail = Shock amplitude
15G / duration 11ms
Interruption < 1µs - on electrical contacts
- between shells
- between shel and rail

Contact retention EIA 364-29 (MIL-STD-1344 / Method 2007.1) on terminated connectors.
Contact size Retention force Max displacement
Ground block 88N (20lbs) 0.30mm (.012 in.)
22 53.4N (12lbs) 0.38mm (.015 in.)
20 89N (20 lbs) 0.38mm (.015 in.)
16 111.2N (25lbs) 0.38mm (.015 in.)
12 133.45N (30lbs) 0.38mm (.015 in.)
8133.45N (30lbs) 0.38mm (.015 in.)
5133.45N (30lbs) 0.38mm (.015 in.)
• Insert retention: 400N (90lbs) (EIA 364-35 = MIL-STD-1344 /Method 2010.1)
• Max displacement: 0.30mm (.012 in.)

TEMPERATURE
• Temperature range: -65° / +155°C
• Temperature life: 1000H at 155°C
OTHER CHARACTERISTICS
• Salt spray: 96 hours (Nickel plating) EIA 364-26 (MIL-STD-1344 / Method 1001.1) test condition A
• Humidity: 10 days with temperature variation from -10°C to +65°C EIA 364-31 Method 4,
test condition B (MIL-STD-1344 /Method 1002.2, type II test condition)
• Altitude immersion: 3 cycles at 50 000 feet EIA 364-03 (MIL-STD-1344 /Method 1004.1)
• For more detail please refer to QM product specication.
8
www.radiall.com
QM® SERIES
www.radiall.com


  


E: Environmental with rear grommet and interfacial seal for pin inserts
Environmental with rear grommet for socket inserts
H: Insert for pin contacts with a rear grommet and without interfacial seal

00 – C3 – P3 – 3Q3 – 06 – 10Q2 – F12C – 12F6 (3)
13C1 – 13P1 – 14 – 17 – 20C1 – 20P1
22 – 22V – 25P1 – 25Q1 – 28 – 30 – 34 – 40– 48

PA: Pin
SA: Socket

(1) Inserts are designed for rear release rear removable contacts
(2) Pin and socket inserts can be installed in either plug or receptacle shell.
(3) F12C and 12F6 inserts available only in E class and 00 insert is only available in E class
www.radiall.com
9
www.radiall.com
QM® SERIES
The full range of environmental EN4644 insert arrangements is available.
All inserts are delivered without contacts. Contacts have to be ordered separately.

00
Dummy insert
C3
3 x size 5 contacts
P3
3 x size 5 Power
3Q3
3 x size 8 Quadrax
06
6 x size 12 contacts
10Q2
8 x size 20 contacts
2 x size 8 Quadrax
12F6
6 x size 16 Optical LuxCis
6 x size 16 special electrical contacts
F12C
(high grade thermoplastic)
12 x size 16 Optical LuxCis
13C1
6 x size 20 contacts
4 x size 15 or 16 contacts
2 x size 12 contacts
1 x size 5 contacts
13P1
6 x size 20 contacts
4 x size 15 or 16 contacts
2 x size 12 contacts
1 x size 5 Power
14
14 x size 15 or 16 contacts
17
14 x size 20 contacts
3 x size 12 contacts
20C1
19 x size 20 contacts
1 x size 5 contacts
20P1
19 x size 20 contacts
1 x size 5 Power
22
16 x size 20 contacts
6 x size 15 or 16 contacts
22V
16 x size 20 contacts
6 x size 16 contacts
25P1
24 x size 22 contacts
1 x size 8 Power
25Q1
24 x size 22 contacts
1 x size 8 Quadrax
28
22 x size 22 contacts
6 x size 15 or 16 contacts
30
30 x size 20 contacts
34
18 x size 22 contacts
16 x size 20 contacts
40
40 x size 22 contacts
48
48 x size 22 contacts
10
www.radiall.com
QM® SERIES
www.radiall.com

EPXB® range of inserts is used for the Quick Lock Multipin connectors.
Contact Size & Type
Serie Inserts Total
Contacts
22 20 15 or 16 16 16 12 8 8 5 5
Signal Signal
Medium
Power or
Coax
LuxCis
Fiber
optic
Power
in Fiber
Optic
cavity
Medium
Power
or Coax
Power
Quadrax
or
Twinax
Coax
or Triax Power
EPXB & QM
C3 3 3
P3 3 3
3Q3 3 3
06 6
10Q2 10 8 2
12F6 12 6 6
F12C 12 12
13C1 13 64 2 1
13P1 13 64 2 1
14 14 14
17 17 14 3
20C1 20 19 1
20P1 20 19 1
22 22 16 6
22V 22 16 6
25P1 25 24 1
25Q1 25 24 1
28 28 22 6
30 30 30
34 34 18 16
40 40 40
48 48 48
www.radiall.com
11
www.radiall.com
QM® SERIES


 


B: Insert size B

P: Plug
R: Receptacle
W: Plug with ground block (1)
Z: Receptacle with ground block (1)

N: Nickel plating

00: delivered without polarizing keys
Delivered with polarizing keys not installed (without code)
**: delivered with polarizing keys installed according to code (see table 2 on page 14)

 
QMBRN 45g
QMBZN 55g
QMBWN 40g
QMBPN 35g
12
www.radiall.com
QM® SERIES
www.radiall.com



 


U: U shape rail single sided

01 - 04 - 06 - 08 - 10 - 15 - 18 - 22
04S - 06S - 08S - 15S - 10G - 18G (1&2)

A: Aluminium

N: Nickel

(1) Other length can be developed on demand
(2) Please refer to the mounting device table 1 on page 13 to have detailed information
www.radiall.com
13
www.radiall.com
QM® SERIES
The rst variable (2 digits) after the basic number designates the quantity of connector positions.
The second variable designates options on the rail such as mounting slots or alternative ground stud,
please refer to table 1 below.
Basic drawing of the QM connector rail, please refer to table 1 for detail on each part number.
Table 1 - Part number list and mounting device options of the QM rail.
Part number Length mm (inch) Number of mounting slots Number of ground studs Weight in (g)
04 199.60 (7.86) none 1 85
04S 199.60 (7.86) 4 1 85
6 246.40 (9.70) none 1 90
06S 246.40 (9.70) 5 1 90
08 293.10 (11.54) none 1 100
08S 293.10 (11.54) 6 1100
10 258.10 (10.16) none 1 105
10G 258.10 (10.16) none 1 105
15 457.20 (18) none 1 220
15S 457.20 (18) 11 1 220
18 501.40 (19.74) none None 240
18G 501.40 (19.74) none 1 240
22 620.80 (24.44) none 2 260
Example of the QMU22AN rail.

Ground Stud
14
www.radiall.com
QM® SERIES
www.radiall.com

Easy reading of polarization code
Polarization code is added at the end of the Part Number and can be seen on the polarization keys as shown below.
Caution: read the polarization code according to the Part Number marking on the connector and not up-side-down.
RECEPTACLE PLUG
Coding device
View shows A & D View shows C & B View shows A & B View shows C & D
Table 2: the 16 possible codings for polarization code:
Key position AAAABBBBCCCCDDDD
Key position ABCDABCDABCDABCD
Notes
(1) Polarizing keys are intended for use on receptacle, use plier 617954020 to remove.
(2) Polarizing posts are intended for use on plug, use plier 617954020 to remove
2 female keys (1)
on the receptacle
(Letters as visual
indicator)
2 male posts (2)
on the plug
(Letters as visual
indicator)
www.radiall.com
15
www.radiall.com
QM® SERIES

Please note Radiall recommends plastic extraction tool for environmental cavities 22-20-16 and 12
(metal extraction tool leads to damage grommet). For cavities 5 and 8, the extraction tool is metallic.
However, you can order a plastic extraction tool for the cavity 8 with the PN M81969/14-06.

Notes
(1) When smaller wire sizes are used on contacts with reduced crimp barrel,
the wire won’t provide sealing to the grommet. If sealing is required, please contact Radiall.
(2) Electrical contacts for optical insert are always pin contacts (hermaphrodite).
(3) In order to make these contacts environmental, it is necessary to add a sealing boot.
Please contact us for additional information.
(4) These power contacts can be used in power inserts only (25P1)
(5) These power contacts can be used in power inserts only (P3, 13P1, 20P1)
(6) Tools in bold are in plastic material and remaining in metal.
Contact size Wire size Type Part number Crimping tool Positioner Ins / ext tool (6)
22 22-24-26
Pin 617200 M22520/2-01 M22520/2-23 M81969/14-01
Socket 617300 282 281 282 970 282 522
22 reduced
crimp barrel 28-30
Pin 617201 (1) M22520/2-01 M22520/2-23 M81969/14-01
Socket 617301 (1) 282 281 282 970 282 522
20 20-22-24
Pin 617221 M22520/2-01 M22520/2-08 M81969/14-10
Socket 617320 282 281 282 971 282 549 029
20 reduced
crimp barrel 22-24-26
Pin 617224001 (1) M22520/2-01 M22520/2-08 M81969/14-02
Socket 617324001 (1) 282 281 282 971 282 886
16 16-18-20
Pin 617240 M22520/1-01 M22520/1-02 M81969/14-03
Socket 617340 282 291 282 972 282 515
16 reduced
crimp barrel 20-22-24
Pin 617241 (1) M22520/1-01 M22520/1-02 M81969/14-03
Socket 617341 (1) 282 291 282 972 282 515
16 for ground block 20
Pin 617221050 M22520/2-01 M22520/2-11 M81969/14-10
Socket N/A 282 281 282581015 282 549 029
16 for optical
electrical insert 16-18-20 Pin
617235003 M22520/1-01
282581013
M81969/14-03
see note 2 282 291 282 515
16 reduced crimp barrel
for optical electrical insert 20-22-24 Pin
617235002 M22520/1-01
282581013
M81969/14-03
(1 & 2) 282 291 282 515
12 12-14-16
Pin 617250 M22520/1-01 M22520/1-02 M81969/14-04
Socket 617350 282 291 282 972 282 549 004
88-10
Pin 617291002 (3 & 4) M22520/23-01 or R282.600.000
282588
M81696/28-03
Socket 617391002 (3 & 4) Die set M22520/23-02 or 282 549 001
58-10
Pin 617280 (3 & 5) M22520/23-01 + 282557020 M81969/28-01
Socket 617390 (3 & 5) Die set M22520/23-02 282557021 282 946
512-16
Pin 617260001 (3 & 5)
282613 282 586 003
M81969/28-01
Socket 617370001 (3 & 5) 282 946
16
www.radiall.com
QM® SERIES
www.radiall.com

Notes
(1) In order to make these contacts environmental, it is necessary to add a sealing boot, please contact Radiall for information.
(2) Tools in bold are in plastic material and remaining in metal.

Center conductor Outer conductor
Ins/ext tool (2)
Contact
size Cable type Type
Environmental
part
number
Non
Environmental
part
number
Crimping
tool Positioner Crimping
tool Die set
15-16 RG174-RG179
RG316
Pin see Note 1 617130 M22520/2-01 282 578 M22520/4-01 282 556 282 512
Socket see Note 1 617030 282 281 282 292
15-16 RG178
Pin see Note 1 617131 M22520/2-01 282 578 M22520/4-01 282 556 282 512
Socket see Note 1 617031 282 281 282 292
15-16
GORE/AXON
P812817
FILECA F1703-134
FILOTEX
SP132868
Pin see Note 1 617132 M22520/2-01 282 578 M22520/4-01 282 556 282 512
Socket see Note 1 617032 282 281 282 292
15-16 RG178 DT
Pin see Note 1 617133 M22520/2-01 282 578 M22520/4-01 282 556 282 512
Socket see Note 1 617033 282 281 282 292
15-16 UT .047
Pin see Note 1 617135 M22520/2-01 282 578 M22520/4-01 282 556 282 512
Socket see Note 1 617035 282 281 282 292
12 UT.085-RG405
Pin see Note 1 617160 N/A
solder termination
M81969/14-04
Socket see Note 1 617060 282 549 004
5RG58-RG141
Pin see Note 1 617101 M22520/2-01 282 572 M22520/5-01 M22520/5-05 M81969/28-01
Socket see Note 1 617001 282 281 282 293 282 246 282 946
5RG142-RG223
RG400
Pin 617 102 001 617102 M22520/2-01 282 572 M22520/5-01 M22520/5-05 M81969/28-01
Socket 617 002 001 617002 282 281 282 293 282 246 282 946
5RG174-RG316
RG188
Pin 617 103 001 617103 M22520/2-01 282 572 M22520/5-01 M22520/5-05 M81969/28-01
Socket 617 003 001 617003 282 281 282 293 282 246 282 946
5RG178-RG196
Pin see Note 1 617104 M22520/2-01 282 572 M22520/5-01 M22520/5-05 M81969/28-01
Socket see Note 1 617004 282 281 282 293 282 246 282 946
5RG180
Pin see Note 1 617105 M22520/2-01 282 572 M22520/5-01 M22520/5-05 M81969/28-01
Socket see Note 1 617005 282 281 282 293 282 246 282 946
www.radiall.com
17
www.radiall.com
QM® SERIES

Notes
((1) In order to make these contacts environmental, it is necessary to add a sealing boot,
please contact us for information.
(2) Tools in bold are in plastic material and remaining in metal.

Center conductor Outer conductor
Ins/ext tool (2)
Contact
size
& type
Cable type Type
Environmental
Part number
Non Environmental
Part number
Crimping
tool Positioner Crimping
tool Die set
12
Triax ECS0700
Pin see Note 1 617 190 010 M22520/2-01 282 581 004 M22520/31-01 282 581 005 M81969/14-04
Socket see Note 1 617 090 010 282 281 282 297 282 549 004
12
Triax
M17/176-
00002
Pin see Note 1 617 190 012 M22520/2-01 282 581 004 M22520/31-01 282 581 005 M81969/14-04
Socket see Note 1 617 090 012 282 281 282 297 282 549 004
8
Triax
TENSOLITE Pin 617 165 021 617 165 020 M22520/5-01 282 560 M22520/5-01 M22520/5-05 M81969/28-03
or M81969/14-06
2447
/03159X-2 Socket 617 065 021 617 065 020 282 293 282 293 282 236 282 549 001
8
Triax
WHITMOR
W26751575
Pin 617 165 617 165 001 M22520/5-01 M22520/5-01 M22520/5-104 M81969/28-03
or M81969/14-06
Socket 617 065 617 065 001 282 293 282 293 282 293 282 549 001
8
Twinax ABS0386WF24
Pin 617 165 011 620 165 010 M22520/2-01 Daniels K709 M22520/5-01 M22520/5-45 M81969/28-03
or M81969/14-06
Socket 617 065 011 620 065 010 282 281 282 581 010 282 293 282 236 282 549 001
8
Twinax
TYCO
1726A1424A
Pin 617 165 011 620 165 010 M22520/2-01 Daniels K709 M22520/5-01 M22520/5-45 M81969/28-03
or M81969/14-06
Socket 617 065 011 620 065 010 282 281 282 581 010 282 293 282 236 282 549 001
5
Triax M17/176-0002
Pin 617 150 001 617150 M22520/2-01 282 560 M22520/5-01 M22520/5-05 M81969/28-01
Socket 617 050 001 617050 282 281 282 293 282 246 282 946
5
Triax PAN6421
Pin 617 152 001 617 152 M22520/2-01 282 560 M22520/5-01 M22520/5-05 M81969/28-01
Socket 617 052 001 617 052 282 281 282 293 282 246 282 946
18
www.radiall.com
QM® SERIES
www.radiall.com

Center conductor Outer conductor Ins / ext tool
in metal
Contact
size Cable type Type Environmental
Part number
Non Environmental
Part number Crimping tool Positioner Crimping tool Die set
8
Ethernet
cable Pin 617 175 011 620 175 010 M22520/2-01 Daniels K709 M22520/5-01 M22520/5-45
M81969/28-03
or
M81969/14-06
ABS0972 &
ABS1503 Socket 617 075 011 620 075 010 282 281 282 581 010 282 293 282 236 282 549 001
8
TENSOLITE Pin 617 175 051 620 175 050 M22520/2-01 Daniels K709 M22520/5-01 M22520/5-45
M81969/28-03
or
M81969/14-06
NF24Q100 Socket 617 075 051 620 075 050 282 281 282 581 010 282 293 282 236 282 549 001
These contacts have been tested as per ARINC 600 supplement 14 standard.

Notes
(1) BMA which have to accommodate SHF cable requires a wiring done by Radiall .Please consult us.
(2) Pin BMA can only be installed in modied EPXB quadrax insert like 3T3AP , 10T2AP ,25T1AP.Eg : EPXBE3T3APA.

Contact
size Cable type Connector Type Environmental
part number
Non Environmental
part number
Frequency
range VSWR Ext tool
8SHF5 - SHF5M (1) Pin (2) 617 171 011 617 171 010 DC-18GHZ 1,35 @ 18GHZ
282549001
8RG142 Pin (2) 617 171 021 617 171 020 DC-12GHZ 1,35 @ 3GHZ
8
SHF2.4M (1) / UT.085
Harbour SS405
Times Tex405
Pin (2) 617 171 031 617 171 030 DC-18GHZ 1,35 @ 18GHZ
8SHF5 - SHF5M (1) Socket 617 071 011 617 071 010 DC-18GHZ 1,35 @ 18GHZ
8RG142 Socket 617 071 021 617 071 020 DC-12GHZ 1,35 @ 3GHZ
8SHF3 (1) Socket 617 071 041 617 071 040 DC-18GHZ 1,35 @ 18GHZ
8
SHF2.4M (1) / UT.085
Harbour SS405
Times Tex405
Socket 617 071 031 617 071 030 DC-18GHZ 1,35 @ 18GHZ
www.radiall.com
19
www.radiall.com
QM® SERIES
This section includes all specic parts used to accommodate the Luxcis® termini in the QM connector.

Material Part number
Pin insert for 12 Luxcis® termini Fiberglass lled thermosetting EPXBEF12CPA
Socket insert (with sleeve holder)
for 12 Luxcis® termini
Insert and sleeve holder:
aluminium alloy EPXBEF12SA
Insert: berglass thermosetting
Sleeve holder:
high grade thermoplastic
EPXBEF12CSA
Hybrid pin insert for 6 electrical contact
and 6 FO Luxcis® termini Fiberglass lled thermosetting EPXBE12F6PA
Hybrid socket insert for 6 electrical contact
and 6 FO Luxcis® termini (with sleeve holder)
Insert: berglass thermosetting
Sleeve holder:
high grade thermoplastic
EPXBE12F6SA
• Socket insert is always supplied with sleeve holder.
• Pin and socket insert can be mounted in either plug or receptacle shells.

Hermaphrodite connectors which is neither male nor female have been developed in which any connector
may be joined to any other connector of the same design.
Contact size Cable size Part number Crimping tool Positioner Ins/Ext tool in platic
16 16-18-20 617 235 003 282 291 282 581 013 282 515
20-22-24 617 235 002 (M22520/1-01) (M81969/1-03)

Singlemode (UPC)
1310/1550nm
Singlemode / APC
1310/1550nm
Multimode (PC)
850 nm/ 1310nm
Attenuation
- Mean
- Standard deviation
(against a reference plug,
IEC 61300-3-4 Method B)
0.15 dB
0.10 dB
0.20 dB
0.12 dB
0.10 dB
0.07 dB
Return loss
(maximum low variation:
IEC 61300-3-6)
> 50 dB > 60 dB > 20 dB
For further details on the LuxCis® Termini please consult Radiall’s LuxCis® catalog or web site.

20
www.radiall.com
QM® SERIES
www.radiall.com

Part number Description
617 954 041 Dust cap for plug shell
617 954 042 Dust cap for receptacle shell
617 980 024 Polarization key pin
617 980 025 Polarization key socket
282 668 001 Plier for polarizing post and key
282 521 004 Right angle insert extraction tool
F780 855 000 Hexagonal key 5/64 inch(2mm)/
ats for sleeve holder removal
282 521 005 Insert extraction tool
617 954 020 Insert handling cover
282 515
Pastic insert extraction tool for
Luxcis® termini
(MIL M81 969/14-03)
617 991 001 EMI backshell
www.radiall.com
21
www.radiall.com
QM® SERIES

In development, 2 new mounting device solutions with the QM connector:
The L-Bracket - for single connector use, limited space solution.
The H Shape Rail - double sided rail, a space saving solution for installation of either 30 or 44 connectors.
Name of the user manual: MIIN1700000 please contact Radiall for a copy.
Name of the technical specication: BPS-C-212.
Manufactured under US patent App, No. 11/614.642.
22
www.radiall.com
QM® SERIES
www.radiall.com

Part Number Page Part Number Page Part Number Page
282246 16-17 617301 15 617165001 17
282281 15-16-17-18 617320 15 617165013 17
282291 15-18 617340 15 617165014 17
282292 16 617341 15 617165020 17
282293 16-17-18 617280 15 617165021 17
282297 17 617300 15 617171010 18
282515 15-18-19-20 617301 15 617171011 18
282522 15 617320 15 617171020 18
282556 16 617340 15 617171021 18
282560 17 617341 15 617171030 18
282572 16 617350 15 617171031 18
282578 16 617390 15 617171040 18
282588 15 282521004 20 617171041 18
282613 15 282521005 14-20 617175011 18
282886 15 282549001 15-16-17-18 617175051 18
282946 15-17 282549004 15-16-17 617190010 17
282970 15 282549029 15 617190012 17
282971 15 282557021 15 617221050 15
282972 15 282557020 15 617224001 15
617001 16 282581004 17 617235002 15-19
617002 16 282581005 17 617235003 15-19
617003 16 282581010 16-17-18 617260001 15
617004 16 282581013 15-19 617291002 15
617005 16 282581015 15 617324001 15
617030 16 282586003 15 617360001 15
617031 16 282668001 20 617370001 15
617032 16 R282600000 15 617391002 15
617033 16 R282650000 15 617954020 12-20
617035 16 617002001 16 617954041 20
617050 17 617003001 16 617954042 20
617052 17 617050001 17 617980024 20
617060 16 617052001 17 617980025 20
617065 17 617065001 17 617991001 11-20
617101 16 617065011 17 620065010 17
617102 16 617065013 17 620075010 18
617103 16 617065014 17 620075050 18
617104 16 617065020 17 620165010 17
617105 16 617065021 17 620175010 18
617130 16 617071010 18 620175050 18
617131 16 617071011 18 F780855000 20
617132 16 617071020 18 EPXBEF12CPA 19
617133 16 617071021 18 EPXBEF12SA 19
617135 16 617071030 18 EPXBEF12CSA 19
617150 17 617071031 18 EPXBE12F6PA 19
617152 17 617071040 18 EPXBE12F6SA 19
617160 16 617071041 18 QMU22AN 13
617165 17 617075011 18 QMBRN00 12
617200 15 617075051 18 QMBPN00 12
617201 15 617090010 17 QMBZN00 12
617221 15 617090012 17 QMBWN00 12
617240 15 617102001 16
617241 15 617103001 16
617250 15 617150001 17
617280 15 617152001 17
617300 15 617156011 17


www.radiall.com
23
www.radiall.com
QM® SERIES
ANTENNAS
RADIALL develops and produces
antennas for frequencies from
27MHz to 6 GHz.
• Technologies used: wire, patch,
printed, wire-plate, PIFA
• Numerous types of antennas:
single pole, dipole, network,
passive or active (with LNA), adaptable and intelligent,
outdoor or integrated.
AEP CONNECTORS
AEP RF connectors are designed
and manufactured in USA for
the demanding requirements of
military eld radio and avionics
systems:
• Coaxial waterproof connectors
with a unique system of sealing.
• MIL-PRF-39012 QPL connectors
• SSMB and SSMC superior connectors
• SLB Self Aligning connector system.
FIBER OPTIC CONNECTORS
Wide range of interconnect
solutions, including standard
connector interfaces for
multimode and singlemode
ber (LC, SC, FC, ST...) as well as
connectors and termini contacts
(MIL-T-29504, ARINC 801) for harsh
environment applications (aeronautic, military, naval,
medical, railway...). Great exibility for custom design.
HARNESSES
The combination of design and
manufacturing of RF and microwave
cables as well as multipin
connectors (EPX, ARINC 404 and
600) allows Radiall to be a specialist
of harnesses for onboard (aeronautic,
navy...) or land (railways, removed
antenna...) equipment or communications systems.
All types of contacts can be used and mixed such as
signal, power, RF, quadrax, ber optic...
RF & MICROWAVE SWITCHES
Wide range of coaxial switching
products for commercial, military
and instrumentation applications.
Available with a large choice of
interfaces (SMA, QMA, N, ...), from
DCto 40 GHz. Main products :
• Standard RAMSES series.
• PLATINUM series with high repeatability (0.03dB) on
insertion loss during 10 million actuations.
• Subminiature SPnT up to 26.5 GHz.
• SMT high power micro-SPDT.
MICROWAVE COMPONENTS
Wide range of coaxial terminations
and attenuators using standard
interfaces (SMA, QMA, N, QN...) from
low (1W) to high power (100W)
and new cable load solution, chip
terminations up to 18 GHz, hybrid
or directional SMT couplers up to
connectorized couplers, lightning protectors, detectors,
rotary joints, phase shifters, DCBlocks...
MULTIPIN CONNECTORS
The range includes rack and
panel connectors (Arinc 404 &
MIL-C-81659B DSX, Arinc 600
NSX & SW280WS1 BPX, EN3682/
MIL-C-83527 MPX JN1123 TCX),
modular connector (EPX A & B),
compatible with a large variety
of contacts : signal, power, RF, data bus, ber optic,
quadrax and twinax.
A range of wire to wire and wire to board is also
available: B & MCSR duty connectors, M, MM, MB,
MBC rectangular miniature series, MMC.
FIBER OPTIC TRANSCEIVERS
Our multi-channel transceiver
modules in smallest available
packages are fully qualied for
harsh environments and avionics
applications.
• Bit rate up to 10 Gbps
• Up to 12 channels per module
• Various packages with footprint as small as 12x13mm2
RF & MICROWAVE CABLE ASSEMBLIES
Wide range of cable assemblies
using all types of coaxial connectors
and cables.
• RG, LMR, conformable, semi-rigid,
corrugated, etc.
• Cable diameter 0.8mm up to 1 5/8"
• SHF wrapped cable manufactured
in house for appplications at 40GHz and above
• TestPro range dedicated to test benches
• Lightweight range designed for airframe installation
• Phase matching available for radar and other applications
RF COAXIAL CONNECTORS
The widest range of coaxial
connectors in the world from
microminiature (UMP) to standard
connectors (7/16) covering the
frequency range of DC to 65 GHz
mixing standardized and custom
interfaces (UMP, IMP, MMS, MMT,
QMA, QN, MMBX).

AEROspace AUTOMOTIVE DEFENSE INDUSTRIAL INSTRUMENTATION SPACE TELECOM
MEDICAL
Photo Courtesy of U.S. Army
RADIALL India private limites
www.radiall.com