H3 Swinghandle System 192 Medium / large * Sealed / non-sealed * Z inc alloy swinghandle system Latch sub-assembly Mounting cup * Multiple locking options; with gasket includingwith DINgasket profile * Indoor/outdoor version * Available for medium (125mm x 25mm) and large (150mm x 25mm) door cutout * Linear and rotational systems available nel gaskets Material and Finish Handle: Zinc alloy, black powder coated or satin chrome plated Cam: Steel, zinc plated Sealed (H3-50 medium shown) Non-Sealed (H3-60 large shown) (Also available in large. See part number selection) (Also available in medium. See part number selection) Pivot end Latch sub-assembly mounting bracket Cam sold separately 22 39.6 (.87) (1.56) Cam sold separately 39.6 (1.56) Grip Grip 34.5 (1.36) 34.5 (1.36) T Medium 152 (5.98) Large 177 (6.97) 22 (.87) T Optional padlock hasp Linear actuator (order separately) Panel gasket Medium 152 (5.98) Large 177 (6.97) Linear actuator (order separately) Optional padlock hasp Performance Details Maximum static load: 250 N (56 lbf) Sealing Notes Sealed version meets NEMA 4/IP66 water intrusion standards Keys See page 130 Notes Key removal in unlocked position only available on non-sealed version Door thickness 0.9 - 3.2 (.035 - .126) 23.9 (.94) Min. to 26.2 (1.03) Max. Lockcore end mounting bracket 12.9 (.51) Door thickness 0.9 - 3.2 (.035 - .126) ACTUAL SIZE H3-50 MEDIUM Latch sub-assembly with gasket Product available to meet TELCORDIA(R) GR-487 contact Southco for details Latch sub-assembly with gasket Mounting cup with gasket ACTUAL SIZE H30-60 LARGE Mounting cup with gasket Latch sub-assembly Latch sub-assembly Pivot end mounting bracket Pivot end mounting bracket Electromechanical swinghandle available see pages 38-39 For single point and actuator plate system see pages 144-145 For dimension details of DIN lock version, please contact Southco Panel gaskets For plastic version see page 196. TELCORDIA is a registered trademark of Telcordia Technologies Inc. Panel gaskets Panel gaskets Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/H3 Lockcore end mounting bracket Panel gaskets Lockcore end mounting bracket Dimensions in millimeters (inch) unless otherwise stated 193 Medium H3-50 25 +.2 -0 Large H3-60 25 (.98 +.008 -0 ) Door +.2 -0 (.98 +.008 -0 ) Frame 17 (.67) Door Frame 19 (.75) 2 x 8.1 50 +.2 -0 (1.97 +.008 -0 ) 50 +.2 -0 (1.97+.008 -0 ) 125 +0.4 -0 (4.92 +.016 ) -0 150 (5.9 50 +.2 -0 (1.97+.008 -0 ) +0.4 -0 +.016 -0 4 (.16) 45 (1.77) ) 50 +.2 -0 (1.97 +.008 -0 ) 364 (1.42.16) Material must be removed for DIN locking versions, optional for other lock styles 364 (1.42.16) ___________________________________________________________________________ Part Number Selection Cam Part Number Table For Use With Linear Actuator Or Actuator Plate For single point: Order latch and cam separately (see page 144-145) Grip With Linear Actuator Grip With Actuator Plate Part Number Grip With Linear Actuator Grip With Actuator Plate Part Number ~ 10.3 (.41) E5-6107 36.9 (1.45) 26.3 (1.04) E5-6115 ~ 12.3 (.48) E5-6108 38.9 (1.53) 28.3 (1.11) E5-6116 24.9 (.98) 14.3 (.56) E5-6109 40.9 (1.61) 30.3 (1.19) E5-6117 26.9 (1.06) 16.3 (.64) E5-6110 42.9 (1.69) 32.3 (1.27) E5-6118 28.9 (1.14) 18.3 (.72) E5-6111 44.9 (1.76) 34.3 (1.35) E5-6119 30.9 (1.22) 20.3 (.80) E5-6112 46.9 (1.85) 36.3 (1.43) E5-6120 32.9 (1.30) 22.3 (.88) E5-6113 48.9 (1.93) 38.3 (1.51) E5-6121 For multi-point order: Latch and cam (if 3 point latching required) Linear actuator and rod adaptors (see page 194) Rods (see pages 198-201) Rod guides (see pages 198-201) 34.9 (1.37) 24.3 (.96) E5-6114 50.9 (2.00) 40.3 (1.59) E5-6122 Note *2 Overmolded keys supplied Latch Part Number (no cam) H3 - T - A L - S F T Size 50 Medium - 152 (5.98) length 60 Large - 177 (6.97) length A Actuator style 1 No padlock hasp for use with linear actuator (see page 194) 2With padlock hasp for use with linear actuator (see page 194) 3No padlock hasp for use as single point or with actuator plate (see page 195) 4With padlock hasp for use as single point or with actuator plate (see page 195) F Finish 44 Satin chrome 50 Black powder coated S Sealing option 0 Non-sealed 1 Sealed L Lock style 00Locking DIN profile (no lock supplied) 01 Locking keyed alike CH751* 02 Locking keyed alike 300* 03 Locking keyed alike 333* 04 Non-locking 05 Locking keyed alike HL450 20 Non-locking with detent 21Locking DIN profile keyed alike CH751* 22 Locking DIN profile keyed alike 300* 23 Locking DIN profile keyed alike 333* 24 40 41 42 43 47 70 71 72 73 77 DIN without Lock Plug 3 mm Double-bit 5 mm Double-bit Bellcore 216 Bellcore Hex-Pin Recess 8 mm triangle DIN profile 3 mm Double-bit DIN profile 5 mm Double-bit DIN profile Bellcore 216 DIN Profile Bellcore Hex-Pin Recess DIN profile 8 mm triangle Dimensions in millimeters (inch) unless otherwise stated Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/H3 H3 Linear Actuator 194 Linear actuator and rod adaptor * Linear actuator for H3 swinghandles * Linear rod travel for limited space * Suitable for left and right hand applications Linear Actuator Closed Position Open Position Material and Finish 72.9 (2.87) Zinc alloy and steel, zinc plated 54 (2.13) To Select Linear actuator and Rod Adaptor: For use with H3-50 and H3-60 swinghandles (see pages 192-193) Order linear actuator and rod adaptors separately (1 actuator and 2 adaptors required per latch) 38 (1.50) 51.7 (2.04) 2 x 9.7 (.38) 40 (1.5) 2 x O 14.2 (.56) Accessories Replacement rod adaptor retainer pin part number: H3-0-44778-01 17.4 (.69) 29.8 (1.17) Part Number Linear actuator and rod adaptors see table For multi-point order: Latch (see pages 192-193) Cam (if 3 point latching required) (see page 193) Linear actuator and rod adaptor (see table) Rods (see pages 198-201) Rod guides (if required) (see page 198) Arms Extended Arms Retracted Hardware pack 2 x M4x0.7x25, pan head No. 2 pozi driv, self tapping screws for gearbox Rod adaptor installation retainer pin (2M6x1x14 supplied) cam screw O 6.4 Wave washer (.251) 8.8 (.35) Lock plug end mounting bracket Adapter 18.9 (.74) stroke Set screw 10.8 (.43) M4x0.7x12, pan head, No.2 Pivot end mounting 35 pozi drive, self tapping bracket (1.38) screw for lock plug Dummy cam used for bracket install no center point latching only Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/H3 154.5 (6.08) 173.4 (6.83) Rod Adaptor Cam & linear actuator installation 225.5 (8.88) 263.2 (10.36) Dimensions in millimeters (inch) unless otherwise stated 17.5 (.69) O 8.60.2 (.34.01) O 14.7 (.58) Part Number Linear actuator H3-51-40 Rod adaptor A5-92-201-31 H3 Swinghandle System 196 Plastic * Large * Non-sealed * Lightweight Glass filled nylon swinghandle system UL94-V0 rated * DIN profile locking options * Push or turn to close versions available H3 Plastic Swinghandle Grip Range (see table) 18.5 (0.73) 24.5 (0.96) 25.75 (1.01) 32 (1.26) Material and Finish Handle: Glass filled nylon Cam: Steel, zinc plated Performance Details Max. static load: 250 N (56 lbf) Keys 0 7.9 -0.1 (0.31) Cam (order seperately) 3.75 (0.147) See page 130 170.6 (6.72) Notes Frame Edge 168 (6.61) 136 (5.35) Electromechanical swinghandle available see pages 38-39 ACTUAL SIZE H30-60 LARGE For metal version visit pages 144-145 and 192-193 DIN Profile Lock Plug 37 (1.45) Part Number Selection ________________________________________________________________________________ For single point: Order latch and cam separately For multi-point order: Latch and cam Linear actuator and rod adaptors Rods Rod guides Latch Part Number (no cam) T Style 65 Push to close handle 66 Turn to close handle H3 - T - 5 L - 0 7 1 Note *2 keys supplied Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/H3 Cam Part Number Table L Lock style 00 Locking DIN profile (no lock supplied) 21 Locking DIN profile keyed alike CH751* 22 Locking DIN profile keyed alike 300* 23 Locking DIN profile keyed alike 333* 70 DIN profile 3 mm Double-bit 71 DIN profile 5 mm Double-bit 72 DIN profile Bellcore 216 73 DIN Profile Bellcore Hex-Pin Recess 77 DIN profile 8 mm triangle Grip Part Number (length = 38mm) Part Number (length = 45mm) 15.5 (.61) 17.5 (.69) 19.5 (.77) 21.5 (.85) 23.5 (.93) OTHER E5-6710 E5-6711 E5-6712 E5-6713 E5-6714 E5-6110 E5-6111 E5-6112 E5-6113 E5-6114 Dimensions in millimeters (inch) unless otherwise stated Please contact Southco H3 Linear Actuators 197 Linear actuators and rod adaptor for plastic H3 swinghandle system Linear Actuator Panel Preparation (Right Hand Mounting shown) 25 +0.2 -0 (.98 +.008 -0 ) +.0.3 50 -0 (1.97 +.012 ) -0 +.0.3 150 -0 (5.9 +.012 ) -0 Gearbox +.0.3 50 -0 (1.97 +.012 ) -0 * Linear actuator for Plastic H3 swinghandles * Linear rod travel for limited space * Suitable for left and right hand applications * Left and Right hand Actuators can be disassembled and reassembled in the opposite hand if required Material and Finish Zinc alloy and steel, zinc plated To Select Linear actuator and Rod Adaptor: 346 (13.62) 306 (12.04) Cam 17 (.67) 19 (.75) 2 x 8.1 For use with H3-65 and H3-66 swinghandles. Order linear actuator and rod adaptors separately (1 actuator and 2 adaptors required per latch) Accessories Replacement rod adaptor retainer pin part number: H3-0-44778-01 Part Number 4 (.16) 45 (1.77) 20 (.79) Closed Position Rod Adaptor O 6.4 (.251) 8.8 (.35) For multi-point order: Latch Cam (if 3 point latching required) Linear actuator and rod adaptor (see table) Rods, Rod guides Open Position Adapter Linear actuator and rod adaptors see table Set screw O 8.60.2 (.34.01) 17.5 (.69) O 14.7 (.58) 10.8 (.43) 35 (1.38) Part Number Linear actuator right hand mounting H3-61-56-33 Linear actuator left hand mounting H3-61-55-33 Rod adaptor A5-92-201-31 Other options available. For complete details on variety, part numbers, installation and specification, go to Dimensions in millimeters (inch) unless otherwise stated www.southco.com/H3