192
ACTUAL SIZE
H3-50 MEDIUM
ACTUAL SIZE
H30-60 LARGE
Dimensions in millimeters (inch) unless otherwise stated
www.southco.com/H3
H3 Swinghandle System
Medium / large · Sealed / non-sealed
Latch sub-assembly
with gasket Mounting cup
with gasket
Cam sold separately
Panel gaskets
Grip
39.6
(1.56)
34.5
(1.36)
22
(.87)
Linear
actuator
(order
separately)
T
Door thickness 0.9 - 3.2 (.035 - .126)
Medium
152 (5.98)
Large
177 (6.97)
23.9 (.94) Min. to 26.2 (1.03) Max.
Optional
padlock
hasp
Latch sub-assembly
with gasket Mounting cup
with gasket
Panel gaskets
Panel gaskets
Latch sub-assembly
Lockcore end
mounting bracket
Pivot end
mounting bracket
Latch sub-assembly
with gasket Mounting cup
with gasket
Panel gaskets
Panel gaskets
Latch sub-assembly
Lockcore end
mounting bracket
Pivot end
mounting bracket
Optional
padlock
hasp
Latch sub-assembly Pivot end
mounting bracket
Cam sold separately
Panel gasket
Grip
39.6 (1.56)
34.5
(1.36)
22
(.87)
Lockcore end
mounting bracket
Door thickness
0.9 - 3.2 (.035 - .126)
Linear
actuator
(order
separately)
T
Medium
152 (5.98)
Large
177 (6.97)
12.9 (.51)
Sealed (H3-50 medium shown)
(Also available in large. See part number selection)
Non-Sealed (H3-60 large shown)
(Also available in medium. See part number selection)
• Zinc alloy swinghandle
system
• Multiple locking options;
including DIN profile
• Indoor/outdoor version
• Available for medium
(125mm x 25mm) and
large (150mm x 25mm)
door cutout
• Linear and rotational
systems available
Material and Finish
Handle: Zinc alloy, black powder
coated or satin chrome plated
Cam: Steel, zinc plated
Performance Details
Maximum static load: 250 N (56 lbf)
Sealing Notes
Sealed version meets NEMA 4/IP66
water intrusion standards
Keys
See page 130
Notes
Key removal in unlocked position
only available on non-sealed version
Product available to meet
TELCORDIA® GR-487 contact
Southco for details
Electromechanical swinghandle
available see pages 38-39
For single point and actuator plate
system see pages 144-145
For dimension details of DIN lock
version, please contact Southco
For plastic version see page 196.
TELCORDIA is a registered
trademark of Telcordia
Technologies Inc.
Other options available. For complete details
on variety, part numbers, installation and
specification, go to
193
Dimensions in millimeters (inch) unless otherwise stated
For single point:
Order latch and cam separately
(see page 144-145)
For multi-point order:
Latch and cam (if 3 point latching
required)
Linear actuator and rod adaptors
(see page 194)
Rods (see pages 198-201)
Rod guides (see pages 198-201)
Note
*2 Overmolded keys supplied
150
(5.9 )
25 (.98 )
125
(4.92 )
50
(1.97 )
Material must be
removed for DIN
locking versions,
optional for other lock styles
+.2
-0 +.008
-0 25 (.98 )
+.2
-0 +.008
-0
+.2
-0
+.008
-0
50
(1.97 )
+.2
-0
+.008
-0
50
(1.97 )
+.2
-0
+.008
-0
50
(1.97 )
+.2
-0
+.008
-0
+0.4
-0
+.016
-0
+0.4
-0
+.016
-0
36±4
(1.42±.16)
36±4
(1.42±.16)
Frame
FrameDoor Door
Cam Part Number Table For Use With Linear Actuator Or Actuator Plate
Grip With
Linear Actuator
Grip With
Actuator Plate Part Number Grip With
Linear Actuator
Grip With
Actuator Plate Part Number
~10.3 (.41) E5-6107 36.9 (1.45) 26.3 (1.04) E5-6115
~12.3 (.48) E5-6108 38.9 (1.53) 28.3 (1.11) E5-6116
24.9 (.98) 14.3 (.56) E5-6109 40.9 (1.61) 30.3 (1.19) E5-6117
26.9 (1.06) 16.3 (.64) E5-6110 42.9 (1.69) 32.3 (1.27) E5-6118
28.9 (1.14) 18.3 (.72) E5-6111 44.9 (1.76) 34.3 (1.35) E5-6119
30.9 (1.22) 20.3 (.80) E5-6112 46.9 (1.85) 36.3 (1.43) E5-6120
32.9 (1.30) 22.3 (.88) E5-6113 48.9 (1.93) 38.3 (1.51) E5-6121
34.9 (1.37) 24.3 (.96) E5-6114 50.9 (2.00) 40.3 (1.59) E5-6122
17 (.67)
2 x 8.1
4
(.16)
19 (.75)
45 (1.77)
Medium H3-50 Large H3-60
___________________________________________________________________________ Part Number Selection
S Sealing option
0 Non-sealed
1 Sealed
H3 - T - A L - S F
Latch Part Number (no cam)
T Size
50 Medium - 152 (5.98) length
60 Large - 177 (6.97) length
L Lock style
00 Locking DIN profile
(no lock supplied)
01 Locking keyed alike CH751*
02 Locking keyed alike 300*
03 Locking keyed alike 333*
04 Non-locking
05 Locking keyed alike HL450
20 Non-locking with detent
21 Locking DIN profile keyed alike
CH751*
22 Locking DIN profile keyed alike 300*
23 Locking DIN profile keyed alike 333*
24 DIN without Lock Plug
40 3 mm Double-bit
41 5 mm Double-bit
42 Bellcore 216
43 Bellcore Hex-Pin Recess
47 8 mm triangle
70 DIN profile 3 mm Double-bit
71 DIN profile 5 mm Double-bit
72 DIN profile Bellcore 216
73 DIN Profile Bellcore Hex-Pin Recess
77 DIN profile 8 mm triangle
A Actuator style
1 No padlock hasp for use with
linear actuator (see page 194)
2 With padlock hasp for use
with linear actuator
(see page 194)
3 No padlock hasp for use as
single point or with actuator
plate (see page 195)
4 With padlock hasp for use as
single point or with actuator
plate (see page 195)
F Finish
44 Satin chrome
50 Black powder coated
www.southco.com/H3
Other options available. For complete details
on variety, part numbers, installation and
specification, go to
194
Ø 6.4
(.251)
8.8
(.35) AdapterSet screw
10.8
(.43)
35
(1.38)
17.5
(.69)
Ø 8.6±0.2
(.34±.01)
Ø 14.7
(.58)
51.7
(2.04)
17.4
(.69) 29.8
(1.17)
38
(1.50)
40
(1.5)
263.2
(10.36)
2 x 9.7
(.38)
225.5
(8.88)
2 x Ø 14.2
(.56)
Arms Extended Arms Retracted
173.4
(6.83)
72.9
(2.87)
Rod adaptor
retainer pin
(2 supplied)
154.5
(6.08)
54
(2.13)
18.9 (.74) stroke
Part Number
Linear actuator H3-51-40
Rod adaptor A5-92-201-31
Dimensions in millimeters (inch) unless otherwise stated
www.southco.com/H3
Hardware pack
Cam & linear
actuator installation
2 x M4x0.7x25,
pan head No. 2
pozi driv, self tapping
screws for gearbox
installation
M6x1x14
cam screw
Lock plug end
mounting bracket
Pivot end mounting
bracket
Dummy cam used for
no center point latching only
M4x0.7x12, pan head, No.2
pozi drive, self tapping
screw for lock plug
bracket install
Wave washer
H3 Linear Actuator
Linear actuator and rod adaptor
• Linear actuator for H3
swinghandles
• Linear rod travel for
limited space
• Suitable for left and right
hand applications
Material and Finish
Zinc alloy and steel, zinc plated
To Select Linear actuator and
Rod Adaptor:
For use with H3-50 and H3-60
swinghandles (see pages 192-193)
Order linear actuator and rod
adaptors separately (1 actuator and
2 adaptors required per latch)
Accessories
Replacement rod adaptor retainer
pin part number: H3-0-44778-01
Part Number
Linear actuator and rod adaptors
see table
For multi-point order:
Latch (see pages 192-193)
Cam (if 3 point latching
required) (see page 193)
Linear actuator and rod adaptor
(see table)
Rods (see pages 198-201)
Rod guides (if required) (see page
198)
Linear Actuator Closed Position Open Position
Rod Adaptor
Other options available. For complete details
on variety, part numbers, installation and
specification, go to
196
ACTUAL SIZE
H30-60 LARGE
www.southco.com/H3
H3 Swinghandle System
Plastic · Large · Non-sealed
H3 Plastic Swinghandle• Lightweight Glass filled
nylon swinghandle system
UL94-V0 rated
• DIN profile locking
options
• Push or turn to close
versions available
Material and Finish
Handle: Glass filled nylon
Cam: Steel, zinc plated
Performance Details
Max. static load: 250 N (56 lbf)
Keys
See page 130
Notes
Electromechanical swinghandle
available see pages 38-39
For metal version visit pages
144-145 and 192-193
L Lock style
00 Locking DIN profile (no lock supplied)
21 Locking DIN profile keyed alike CH751*
22 Locking DIN profile keyed alike 300*
23 Locking DIN profile keyed alike 333*
70 DIN profile 3 mm Double-bit
71 DIN profile 5 mm Double-bit
72 DIN profile Bellcore 216
73 DIN Profile Bellcore Hex-Pin Recess
77 DIN profile 8 mm triangle
H3 - T - 5 L - 0 7 1
T Style
65 Push to close handle
66 Turn to close handle
For single point:
Order latch and cam separately
For multi-point order:
Latch and cam
Linear actuator and rod adaptors
Rods
Rod guides
Note
*2 keys supplied
Latch Part Number (no cam)
Cam Part Number Table
Grip Range
(see table)
3.75
(0.147)
7.9
(0.31)
0
-0.1
32
(1.26)
18.5
(0.73)
24.5
(0.96)
25.75
(1.01)
37
(1.45)
Cam
(order
seperately)
136
(5.35)
168
(6.61)
170.6
(6.72)
Frame
Edge
DIN Profile
Lock Plug
Grip Part Number (length = 38mm) Part Number (length = 45mm)
15.5 (.61) E5-6710 E5-6110
17.5 (.69) E5-6711 E5-6111
19.5 (.77) E5-6712 E5-6112
21.5 (.85) E5-6713 E5-6113
23.5 (.93) E5-6714 E5-6114
OTHER Please contact Southco
Part Number Selection _______________________________________________________________________________
Other options available. For complete details
on variety, part numbers, installation and
specification, go to
Dimensions in millimeters (inch) unless otherwise stated
197
Ø 6.4
(.251)
8.8
(.35) AdapterSet screw
10.8
(.43)
35
(1.38)
17.5
(.69)
Ø 8.6±0.2
(.34±.01)
Ø 14.7
(.58)
306
(12.04)
346
(13.62)
20
(.79)
Gearbox
Part Number
Linear actuator right hand mounting H3-61-56-33
Linear actuator left hand mounting H3-61-55-33
Rod adaptor A5-92-201-31
www.southco.com/H3
H3 Linear Actuators
Linear actuators and rod adaptor for plastic H3 swinghandle system
• Linear actuator for
Plastic H3 swinghandles
• Linear rod travel for
limited space
• Suitable for left and right
hand applications
• Left and Right hand
Actuators can be
disassembled and
reassembled in the
opposite hand if required
Material and Finish
Zinc alloy and steel, zinc plated
To Select Linear actuator and
Rod Adaptor:
For use with H3-65 and H3-66
swinghandles. Order linear actuator
and rod adaptors separately (1
actuator and 2 adaptors required
per latch)
Accessories
Replacement rod adaptor retainer
pin part number: H3-0-44778-01
Part Number
Linear actuator and rod adaptors
see table
For multi-point order: Latch
Cam (if 3 point latching required)
Linear actuator and rod adaptor
(see table)
Rods, Rod guides
Linear Actuator
(Right Hand Mounting shown)
Closed Position Open Position
Panel Preparation
Rod Adaptor
Cam
150
(5.9 )
25 (.98 )
+0.2
-0
+.0.3
-0
+.008
-0
+.012
-0
50
(1.97 )
+.0.3
-0
+.012
-0
50
(1.97 )
+.0.3
-0
+.012
-0
17 (.67)
2 x 8.1
4
(.16)
19 (.75)
45 (1.77)
Other options available. For complete details
on variety, part numbers, installation and
specification, go to
Dimensions in millimeters (inch) unless otherwise stated
