SC-E1/G-24VDC - Fuji Electric

INFORMATION IN THIS CATALOG IS SUBJECT TO CHANGE WITHOUT NOTICE.

Printed in USA 2004/5M

FUJI ELECTRIC FA COMPONENTS

& SYSTEMS

Gate City Osaki, East Tower

11-2 Osaki 1-chome

Shinagawa-ku, Tokyo 141-0032, Japan

Phone: Tokyo 3-5435-7136

Fax: Tokyo 3-5435-7457

Website: www.fujielectric.co.jp

FUJI ELECTRIC CORP.

OF AMERICA

Park 80 West Plaza II

Saddle Brook, NJ 07663

Phone: 201-712-0555

Fax: 201-368-8258

Website: www.fujielectric.com

Your local authorized stocking distributor is:

MANUAL MOTOR STARTERS

MAGNETIC CONTACTORS

USEH530a

Advanced Motor Protection and Control – Fuji DUO series

Fuji's new motor control system for the international market.

Manual Motor Starters that provide

optimal protection by integrating the

functions of a molded case circuit

breaker and thermal overload relay

into a highly compact unit.

DUO SERIES

Manual motor starters (MMS)

Contactors and thermal overload relays

SC-M series

SC-E series TK-E series

Provide the ability to configure

combination starters for

compact, reliable motor

protection by combining a

manual motor starter and a

magnetic contactor.

Combination starters

Compact magnetic contactors and small

capacity motor control for 3 to 5HP,

480VAC.

The DUO series adds a new family of compact, high-performance combination starters to manual motor starters BM3

series, magnetic contactors SC-M and SC-E series and thermal overload relays TK-E series to form a complete line-up

of motor control products.

ULTIMATE COST SAVING SOLUTION

Responding to today's market needs, Fuji DUO series was designed to provide various distinctive features.

Rated current: 0.16 to 32A, 10 to 63A

Short circuit current rating : 22, 50kA 480VAC

Width: 45mm, 55mm

Rated capacity: AC-3 3 to 5HP, 480VAC

Width: 45mm

Magnetic contactors and thermal

overload relays featuring terminals with

finger protection for 5 to 100HP.

Rated capacity: AC-3 5 to 100HP

Width: 43,54,67mm (5 to 50HP)

88,100,115mm (60 to 100HP)

BM3 series

FUJI meets emerging needs with a new form of motor protection.

RESPONSE TO THE INTERNATIONAL MARKET SAFETY AND ECOLOGICAL CONSIDERATION

•The number of components like Circuit

Breakers can be reduced. (See page 4 to 7

for detail.)

•Combination starters combined with manual

motor starters and contactors, provides 52%

reduction for monting space and 90% reduction

for wiring work to make a control panel.

•Short-circuit protective coordination

between protective devices and the

equipment to be protected.

•Conformance to UL including Type E, Type F,

CSA, IEC and other international standards.

•Application of international standards in

safety features such as terminals with

finger protection.

•Use of recycled materials to help conserve

the environment and save resources.

Manual motor starters BM3 series

Conforming to international standards and combining compactness with high breaking performance,

this versatile series features leading-edge motor protection.

Magnetic contactors SC-M and SC-E series

A full line-up consisting of the mini-contactor SC-M series for 3 to 5HP, 480VAC use and the SC-E series

for 5 to 100HP 480VAC use.

Circuit breaker functions

• Short-circuit protection

• Overcurrent protection

• Line protection

Thermal overload relay functions

• Overload protection

• Phase-loss protection

• Rated current adjustment

• Ambient temperature compensation

Manual motor starter advantages

Compactness

Reduction in wiring work

Standards

Approved

Ecological design

Mounting space: MCCB + Thermal overload relay: 100%

    MMS: 43% (57% reduction)

MCCB + Contactor + Thermal overload relay: 100%

MMS + Contactor: 50% (50% reduction)

• IEC 60947-1, 60947-2, 60947-4-1, UL 508, CSA C22.2 No.14

• cUL (File No. E163944, E211710), TÜV (R205062B)

• Recyclable thermoplastic resin used in plastic parts

• Indication of materials used

• Cadmium-free contacts

Molded case circuit breaker and thermal overload relay functions integrated into a highly compact unit.

• Finger protection standard • Lug terminal

SC-M series SC-E series

SC-M01, M02 SC-E02 to E05 SC-E1 to E2S SC-E3, E4

45mm

54mm

67mm

43mm

52% reduction

Space-saving, reliable motor protection achieved by combining a manual motor starter and magnetic contactor.

Contactor

Thermal overload relay

• Overload protection

• Phase-loss protection

Motor

MCCB MCCB

Combination starter

(MMS+Contactor)

• Short-circuit protection

• Overload protection

• Phase-loss protection

MCCB

• Short-circuit protection

Wiring work

Mounting space

90% reduction

Conventional system New system using an MMS

For control panel

MMS

BM3R series

Contactor

Link module Link module

Base

plate

Contactor

SC-M series

MMS

Contactor

SC-E series

MMS

BM3V series

Combination starters can be easily configured with a manual motor starter, magnetic contactor and other parts.

Combination of manual motor starters and magnetic contactors

A line-up that aims to set a new world standard for compactness, high performance,

and utility in combination starters.

Motor

MMS

MCCB

Branch Circuit

Protection Devices

(Fuses or Circuit Breakers)

Motor

MMS

MCCB

Branch Circuit

Protection Devices

(Fuses or Circuit Breakers)

MCCB

Branch Circuit

Protection Devices

(Fuses or Circuit

Breakers)

Standard circuit Group Installation circuit

Fuji proposes ultimate cost saving solution with DUO series

Fuji Manual Motor Starter (MMS) intends to apply for manual motor starting application.

As UL listed manual motor controller per UL508, they provide overload protection but are required to be installed

with short circuit protection devices (Fuses or Circuit Breakers) on the upstream.

However, according to National Electrical Code (NEC), you can save the cost of short circuit protection devices

and can make a smaller panel using DUO series.

The following are case studies for the cost saving use of Fuji DUO series.

Case study 1 : Group Motor Installation

Per NEC430-52 and -53, the combination with a specific rated Fuse or Circuit Breaker allows several motors in a circuit

composition.

Fuji MMS are cUL listed per group installation regulations of NEC.

Two or more motors can be connected to one branch circuit when the MMS is used with a specific current rated branch circuit

protection device (see remarks below).

The advantages of Group Installation are as follows.

- The number of components like Circuit Breakers can be reduced

- The wire size can be reduced by 1/3 - 1/10 under certain conditions

- The area inside the control panel can be minimized

Remarks :

Per NEC regulations, to connect several motors on one branch circuit protection device, note the following conditions (A) or (B)

or (C) and condition (D) listed NEC article 430.53 must be complied.

(A) : Not over 1 horsepower

(B) : If smallest rated motor protected

(D) : Single motor taps.

For complete details, please refer to NEC book.

Case study 2 : Self-Protected Combination Motor Controller / TYPE E and TYPE F

Fuji MMS are cUL listed as a Self-Protected Combination Controller such as Type E and Type F.

To apply MMS as Self-Protected Combination Controller, MMS must be attached to short circuit alarm contact block (BZ0TKUAB).

32A frame type, BM3R series must also be attached to the line side terminal cover (BZ0TCRE) because the Self-Protected

Combination Controller has the clearance and creepage distance requirements as UL489 regulation.

(63A frame type, BM3V series complies with their regulation without terminal cover.)

(1) Combination motor controller, Type E, when only MMS is used.

 (Manual Self-Protected Combination Motor Controller according to UL508)

(2) Combination motor controller, Type F, when MMS is used with Fuji SC-E, SC-M contactor.

 (Manual Self-Protected Combination Motor Controller + Magnetic contactor according to UL508)

The advantage of a Self-Protected Combination Motor Controller is that it can replace a UL489 Circuit Breaker.

This means that in a motor branch circuit, the UL489 Circuit Breaker upstream can be eliminated.

MMS has a trip function like a Circuit Breaker for the purpose of protection against short-circuit.

Therefore, the number of components can be reduced and will result in saving more space than the ordinary Group Installation.

* The self-protected combination motor controller can be used as branch circuit protection in Motor Circuit only.

 They cannot be applied to any other loads such as resistance load.

Group Installation circuit

Motor

MMS

MCCB

Branch Circuit

Protection

Devices

(Fuses or Circuit

Breakers)

Branch Circuit

Protection

Devices

(Fuses or Circuit

Breakers)

Motor

MMS

MCCB

Branch Circuit

Protection

Devices

(Fuses or Circuit

Breakers)

Requirements for Type E construction

- Terminal cover (BZ0TCRE) except for BM3V series.

- Short-circuit alarm contact block (BZ0TKUAB) for all MMS.

Example of Type E application

Application as Type E Controller

Requirements for Type F construction

- Must be used with contactor for motor control fuction.

- Terminal cover (BZ0TCRE) except for BM3V series.

- Short-circuit alarm contact block (BZ0TKUAB) for all MMS.

Group Installation circuit

Motor

MMS

+ CTT

MCCB

Branch Circuit

Protection

Devices

(Fuses or Circuit

Breakers)

Branch Circuit

Protection

Devices

(Fuses or Circuit

Breakers)

Motor

MMS

+ CTT

MCCB

Branch Circuit

Protection

Devices

(Fuses or Circuit

Breakers)

Example of Type F application

Application as Type F Controller

Traditional

motor circuit

MMS application Type E, Type F application

Case study 3 : Motor Disconnecting Means

Per NEC 430.102, a disconnecting means must be applied to each controller.

Fuji MMS are also cUL listed as "Suitable as Motor disconnect" and can be applied as a Motor disconnect.

The advantage of using MMS for disconnect means :

- An extra component will not be needed because the MMS has a dual function, which will lead to smaller space requirement

and less components.

A A A

A: Motor Feeder short-

circuit and ground-

fault protection

B: Motor disconnecting

means

C: Motor branch-circuit

short-circuit and

ground-fault

protection

D: Motor controller

E: Motor overload

protection

CONTENTS

Contactors SC-M and SC-E series

General information

Quick reference guide

Ordering information and Characteristics

Optional accessories

Dimensions

Instructions

......................................................................

...................................................................

.......................................

.....................................................................

...................................................................................

Thermal overload relays TK-E series

Quick reference guide and Ordering information

Characteristics

Optional accessories

Dimensions

Instructions

............................

..............................................................................

.....................................................................

...................................................................................

Combination Starters

Quick reference guide

Optional accessories

...................................................................

.....................................................................

Dimensions ...................................................................................

List price

For BM3 Series Manual Motor Starters

For BM3 Series Manual Motor Starters accessories

For SC-M and SC-E series Contactors and

TK-E series Overload Relay and accessories

..........................................

.......................

............................

For Combination Starters accessories ...........................................

Appendix

Appendix 1 : Construction of combination motor controllers

Appendix 2 : Short circuit coordination comparison

............

........................

Terms and conditions of sale ....................................

Manual Motor Starters

..............................................................................

.......................................

.....................................................................

...................................................................................

............................................................................

....................................................................................

Quick reference guide

Type E ratings

Ordering information and Characteristics

Optional accessories

Dimensions

Instructions

Busbar systems

Enclosures

................................................................... 9

Page

32A Frame types and ratings

Available – Not available

Standard breaking capacity

Adjustable thermal-magnetic trip type BM3RSB-

KK01-317

Number of poles 3

Handle type Rocker

Rated current Ie (A) 0.16 to 32

Rated operational voltage Ue (V) 200 to 690

Rated frequency (Hz) 50/60

Rated insulation voltage Ui (V) 690

Rated impulse withstand voltage Uimp (kV) 6

Utilization IEC 60947-2 Circuit breaker Cat. A

category IEC 60947-4-1 Motor starter AC-3

Trip class IEC 60947-4-1 10

Instantaneous trip characteristic 13 le max.

Power loss (total of 3-pole) 7W: In=0.16 to 25A 8.5W: In=32A

Mechanical durability (operations) 100,000: In=0.16 to 25A 70,000: In=32A

Electrical durability (operations) 100,000: In=0.16 to 25A 70,000: In=32A

Max. operations per hour (motor start-up) 25

Phase-loss protection Provided

Trip indicator Provided

Test trip function Provided

Adjustable current range

UL/CSA 3phase HP rating (HP) *2Instantaneous UL/CSA Short circuit

Maximum listed branch

trip current (A) current rating (kA) *3circuit protection *3

Code

Ie: Min.–Max.

(A)

240VAC 480VAC 600VAC Fuse or MCCB (A)

P16 0.1–0.16

In accordance with

Motor full load current

P25 0.16–0.25

P40 0.25–0.4

P63 0.4–0.63

001 0.63–1 .

1P6 1–1.6

2P5 1.6–2.5

004 2.5–4 .

6P3 4–6.3

010 6.3–10

013 9–13

016 11–16

020 14–20

025 19–25

032 24–32

Dimensions (mm) W X H X D 45 X 90 X 66

Mass (g) 350

Optional Auxiliary contact block

accessory Alarm contact block

Auxiliary and alarm contact block

Short-circuit alarm contact block

Shunt trip device

Undervoltage trip device

External operating handle –

Standard IEC 60947-1, 60947-2, 60947-4-1, UL 508, CSA C22.2 No.14

    2.1 100 50 10 500

    3.3 100 50 10 500

    5.2 100 50 10 500

    8.2 100 50 10 500

   1/2 13 100 50 10 500

  3/4 3/4 20.8 100 50 10 500

1/2  1/2 1 1-1/2 32.5 100 50 10 500

3/4  3/4 2 3 52 100 50 10 500

1  1-1/2 3 5 81.9 100 50 10 500

2 3 5 7-1/2 130 100 22 10 500

3 3 7-1/2 10 169 100 22 10 500

3 5 10 10 208 100 22 10 500

5 5 10 15 260 50 22 10 500

7-1/2 7-1/2 15 20 325 50 22 10 500

10 10 20 30 416 50 22 10 500

200-

208VAC

220-

240VAC

440-

480VAC

550-

600VAC

Notes: *1 Replace the mark in the part number by current range codes.

*2 The BM3RSB is cUL listed as HP rated motor controllers.

*3 The BM3RSB is cUL listed for group Installation as per NEC430-53(C).

Manual Motor Starters

Quick reference guide

32A Frame types and ratings

Available – Not available

High breaking capacity

Adjustable thermal-magnetic trip type BM3RHB-

Number of poles 3

Handle type Rotary

Rated current Ie (A) 0.16 to 32

Rated operational voltage Ue (V) 200 to 690

Rated frequency (Hz) 50/60

Rated insulation voltage Ui (V) 690

Rated impulse withstand voltage Uimp (kV) 6

Utilization IEC 60947-2 Circuit breaker Cat. A

category IEC 60947-4-1 Motor starter AC-3

Trip class IEC 60947-4-1 10

Instantaneous trip characteristic 13 le max.

Power loss (total of 3-pole) 7W: In=0.16 to 25A 8.5W: In=32A

Mechanical durability (operations) 100,000: In=0.16 to 25A 70,000: In=32A

Electrical durability (operations) 100,000: In=0.16 to 25A 70,000: In=32A

Max. operations per hour (motor start-up) 25

Phase-loss protection Provided

Trip indicator Provided

Test trip function Provided

UL/CSA 3phase HP rating (HP) *2Instantaneous UL/CSA Short circuit

Maximum listed branch

trip current (A) current rating (kA) *3circuit protection *3

240VAC 480VAC 600VAC Fuse or MCCB (A)

Dimensions (mm) W X H X D 45 X 90 X 79

Mass (g) 370

Optional Auxiliary contact block

accessory Alarm contact block

Auxiliary and alarm contact block

Short-circuit alarm contact block

Shunt trip device

Undervoltage trip device

External operating handle

Standard IEC 60947-1, 60947-2, 60947-4-1, UL 508, CSA C22.2 No.14

AF01-42

Manual Motor Starters

Quick reference guide

In accordance with

Motor full load current

    2.1 100 50 10 500

    3.3 100 50 10 500

    5.2 100 50 10 500

    8.2 100 50 10 500

   1/2 13 100 50 10 500

  3/4 3/4 20.8 100 50 10 500

1/2  1/2 1 1-1/2 32.5 100 50 10 500

3/4  3/4 2 3 52 100 50 10 500

1  1-1/2 3 5 81.9 100 50 10 500

2 3 5 7-1/2 130 100 50 10 500

3 3 7-1/2 10 169 100 50 10 500

3 5 10 10 208 100 50 10 500

5 5 10 15 260 100 50 10 500

7-1/2 7-1/2 15 20 325 100 50 10 500

10 10 20 30 416 100 50 10 500

200-

208VAC

220-

240VAC

440-

480VAC

550-

600VAC

Adjustable current range

Code

Ie: Min.–Max.

(A)

P16 0.1–0.16

P25 0.16–0.25

P40 0.25–0.4

P63 0.4–0.63

001 0.63–1

1P6 1–1.6

2P5 1.6–2.5

004 2.5–4

6P3 4–6.3

010 6.3–10

013 9–13

016 11–16

020 14–20

025 19–25

032 24–32

Notes: *1 Replace the mark in the part number by current range codes.

*2 The BM3RHB is cUL listed as HP rated motor controllers.

*3 The BM3RHB is cUL listed for group Installation as per NEC430-53(C).

63A Frame types and ratings

Available – Not available

Standard breaking capacity

Adjustable thermal-magnetic trip type BM3VSB-

AF01-47

Number of poles 3

Handle type

Rated current Ie (A)

Rated operational voltage Ue (V)

Rated frequency (Hz)

Rated insulation voltage Ui (V)

Rated impulse withstand voltage Uimp (kV)

Utilization IEC 60947-2 Circuit breaker

category IEC 60947-4-1 Motor starter

Trip class IEC 60947-4-1

Instantaneous trip characteristic

Power loss (total of 3-pole)

Mechanical durability (operations)

Electrical durability (operations)

Max. operations per hour (motor start-up)

Phase-loss protection

Trip indicator

Test trip function

UL/CSA 3phase HP rating (HP) *2Instantaneous UL/CSA Short circuit

Maximum listed branch

trip current (A) current rating (kA) *3circuit protection *3

240VAC 480VAC 600VAC Fuse or MCCB (A)

Dimensions (mm) W X H X D 55 X 110 X 96

Mass (g) 780

Optional Auxiliary contact block

accessory Alarm contact block

Auxiliary and alarm contact block

Short-circuit alarm contact block

Shunt trip device

Undervoltage trip device

External operating handle

Standard IEC 60947-1, 60947-2, 60947-4-1, UL 508, CSA C22.2 No.14

Rotary

10 to 63

200 to 690

50/60

1000

Cat. A

AC-3

13 x le max.

11W: In=10 to 32A 15W: In=40 to 50A 17W: In=63A

50,000

25,000

Provided

2 3 5 7-1/2 130 100 22 10 600

3 3 7-1/2 10 169 100 22 10 600

3 5 10 10 208 100 22 10 600

5 5 10 15 260 100 22 10 600

7-1/2 7-1/2 15 20 325 100 22 10 600

10 10 20 30 416 100 22 10 600

10 10 30 30 520 100 22 10 600

15 15 30 40 650 100 22 10 600

20 20 40 60 819 100 22 10 600

200-

208VAC

220-

240VAC

440-

480VAC

550-

600VAC

Manual Motor Starters

Quick reference guide

Code

Ie: Min.–Max.

(A)

010 6.3–10

013 9–13

016 11–16

020 14–20

025 19-25

032

040

050

063

24-32

28-40

35-50

45-63

Adjustable current range

Notes: *1 Replace the mark in the part number by current range codes.

*2 The BM3VSB is cUL listed as HP rated motor controllers.

*3 The BM3VSB is cUL listed for group Installation as per NEC430-53(C).

63A Frame types and ratings

Available – Not available

High breaking capacity

Adjustable thermal-magnetic trip type BM3VHB-

AF01-43

Number of poles 3

Handle type

Rated current Ie (A)

Rated operational voltage Ue (V)

Rated frequency (Hz)

Rated insulation voltage Ui (V)

Rated impulse withstand voltage Uimp (kV)

Utilization IEC 60947-2 Circuit breaker

category IEC 60947-4-1 Motor starter

Trip class IEC 60947-4-1

Instantaneous trip characteristic

Power loss (total of 3-pole)

Mechanical durability (operations)

Electrical durability (operations)

Max. operations per hour (motor start-up)

Phase-loss protection

Trip indicator

Test trip function

Adjustable current range

UL/CSA 3phase HP rating (HP) *2Instantaneous UL/CSA Short circuit

Maximum listed branch

trip current (A) current rating (kA) *3circuit protection *3

Code

Ie: Min.–Max.

(A)

240VAC 480VAC 600VAC Fuse or MCCB (A)

010 6.3–10

013 9–13

016 11–16

020 14–20

025 19-25

032

040

050

063

24-32

28-40

35-50

45-63

Dimensions (mm) W X H X D 55 X 110 X 96

Mass (g) 780

Optional Auxiliary contact block

accessory Alarm contact block

Auxiliary and alarm contact block

Short-circuit alarm contact block

Shunt trip device

Undervoltage trip device

External operating handle

Standard IEC 60947-1, 60947-2, 60947-4-1, UL 508, CSA C22.2 No.14

Rotary

10 to 63

200 to 690

50/60

1000

Cat. A

AC-3

13 x le max.

11W: In=10 to 32A 15W: In=40 to 50A 17W: In=63A

50,000

25,000

Provided

2 3 5 7-1/2 130 100 50 10 600

3 3 7-1/2 10 169 100 50 10 600

3 5 10 10 208 100 50 10 600

5 5 10 15 260 100 50 10 600

7-1/2 7-1/2 15 20 325 100 50 10 600

10 10 20 30 416 100 50 10 600

10 10 30 30 520 100 50 10 600

15 15 30 40 650 100 50 10 600

20 20 40 60 819 100 50 10 600

200-

208VAC

220-

240VAC

440-

480VAC

550-

600VAC

Manual Motor Starters

Quick reference guide

Adjustable current range

Notes: *1 Replace the mark in the part number by current range codes.

*2 The BM3VHB is cUL listed as HP rated motor controllers.

*3 The BM3VHB is cUL listed for group Installation as per NEC430-53(C).

Manual Motor Starters

Manual motor starters

Code Ie; Min-Max.

(A)

P16

P25

P40

P63

001

1P6

2P5

004

6P3

010

013

016

020

025

032

0.1-0.16

0.16-0.25

0.25-0.4

0.4-0.63

0.63-1.0

1-1.6

1.6-2.5

2.5-4

4-6.3

6.3-10

9-13

11-16

14-20

19-25

24-32a

Rated capacity (HP)

220-240V AC

1/2

3/4

1-1/2

7-1/2

Rated capacity (HP)

440-480V AC

3/4

7-1/2

up to 240V AC

100

up to 480/277V AC

3 phase motor Short circuit rating(kA)

• BM3RSB (Type E ratings)

To make an application for use with Type E controller, you need to prepare BZ0TCRE and BZ0TKUAB accessories for BM3RSB separately.

Type E ratings

In accordance with Motor full load current

Manual motor starters

Code Ie; Min-Max.

(A)

P16

P25

P40

P63

001

1P6

2P5

004

6P3

010

013

016

020

025

032

0.1-0.16

0.16-0.25

0.25-0.4

0.4-0.63

0.63-1.0

1-1.6

1.6-2.5

2.5-4

4-6.3

6.3-10

9-13

11-16

14-20

19-25

24-32

Rated capacity (HP)

220-240V AC

1/2

3/4

1-1/2

7-1/2

Rated capacity (HP)

440-480V AC

3/4

7-1/2

up to 240V AC

100

up to 480/277V AC

3 phase motor Short circuit rating(kA)

• BM3RHB (Type E ratings)

To make an application for use with Type E controller, you need to prepare BZ0TCRE and BZ0TKUAB accessories for BM3RHB separately.

In accordance with Motor full load current

Manual motor starters

Code Ie; Min-Max.

(A)

010

013

016

020

025

032

040

050

063

6.3-10

9-13

11-16

14-20

19-25

24-32

28-40

35-50

45-63

Rated capacity (HP)

220-240V AC

7-1/2

Rated capacity (HP)

440-480V AC

7-1/2

up to 240V AC

100

up to 480/277V AC

3 phase motor Short circuit rating(kA)

• BM3VSB (Type E ratings)

To make an application for use with Type E controller, you need to prepare BZ0TKUAB accessories for BM3VSB separately.

Manual motor starters

Code Ie; Min-Max.

(A)

010

013

016

020

025

032

040

050

063

6.3-10

9-13

11-16

14-20

19-25

24-32

28-40

35-50

45-63

Rated capacity (HP)

220-240V AC

7-1/2

Rated capacity (HP)

440-480V AC

7-1/2

up to 240V AC

100

up to 480/277V AC

3 phase motor Short circuit rating(kA)

• BM3VHB (Type E ratings)

To make an application for use with Type E controller, you need to prepare BZ0TKUAB accessories for BM3VHB separately.

BM3 V H B - 063

Product category

Frame size

R: 32A Frame 45mm wide

V: 63A Frame 55mm wide

Rated current code (see page 9 to 12)

Operating characteristic

B: Adjustable thermal-magnetic trip

Breaking capacity

S: Standard breaking capacity

H: High breaking capacity

Ordering information

Specify the following:

1. Part number

2. Accessories if required

Manual Motor Starters

• BM3RSB, RHB • BM3VSB, VHB

Characteristic curves

110 100

Multiple of rated current (A)

Operating time (s)

0.001

0.01

0.1

100

1000

10000

3-phase cold start

3-phase hot start

Instantaneous trip

1100 to 1560% of

max. setting current

110 100

Multiple of rated current (A)

Operating time (s)

0.001

0.01

0.1

100

1000

10000

3-phase cold start

3-phase hot start

Instantaneous trip

1100 to 1560% of

max. setting current

Ordering information and Characteristics

Manual Motor Starters

Description Starter Mounting Contact Part number Mass

type arrangement (g)

BM3R Front 1NO BZ0WIA 9

BM3V 1NC BZ0WIB

Left side 2NO BZ0WUAAL 45

1NO+1NC BZ0WUABL

2NC BZ0WUBBL

Right side

2NO BZ0WUAAR 45

1NO+1NC BZ0WUABR

2NC BZ0WUBBR

Features

• All accessories can be used with BM3R (45mm wide) and

BM3V (55mm wide) frames.

• Accessories are easily mounted.

• Internal auxiliary contact blocks and alarm contact blocks

can be mounted on front side.

• External auxiliary contact blocks can be mounted on either

the right or left side.

These blocks are linked to the ON/OFF operation of

the MMS. Up to two contact blocks can be mounted

to the right/left front, and up to two contact blocks can

be mounted to the right/left sides.

• Shunt trip and undervoltage trip devices are available in a

wide range of operating voltages.

• Standard and emergency external handles are available.

• IP20 terminal cover prevents accidental contact to

electrically charged parts.

Part number and ratings

• Auxiliary contact blocks (W)

AF01-60L

AF01-59, 01-58

Description Starter Mounting Contact Part number Mass

type arrangement (g)

BM3R Front 1NO BZ0KIA 9

BM3V 1NC BZ0KIB

AF01-60R

• Alarm contact blocks (K)

This block operates when the MMS trips due to

overload, phase-loss, or short-circuit. It is not linked

to the ON/OFF operation of the MMS.

Note: Operation can be checked with the test trip function.

(Right

side only)

Aux. contact block Alarm contact block

AF01-76

Aux. contact blocks

Aux. and alarm contact block

Short-circuit alarm contact block

Aux. contact blocks

Shunt-trip device

Undervoltage trip device

Optional accessories

Manual Motor Starters

Description Starter Mounting Contact Part number Mass

type arrangement (g)

BM3R Left 1NO (Aux.)+ BZ0WKUAA 45

BM3V 1NO (Alarm)

1NC (Aux.)+ BZ0WKUBA

1NO (Alarm)

1NO (Aux.)+ BZ0WKUAB

1NC (Alarm)

1NC (Aux.)+ BZ0WKUBB

1NC (Alarm)

• This contact block combines auxiliary contact and alarm

contact that operate in the event of an overload, phase loss,

or short-circuit. Alarm contact is not linked to the ON/OFF

operation of the MMS.

• An alarm is displayed in the contact block’s indicator when

the alarm contact operates.

Note: Operation can be checked with the test trip function.

• Auxiliary and alarm contact blocks (WK)

AF01-57

Description Starter Mounting Contact Part number Mass

type arrangement (g)

BM3R Left 1NO+1NC BZ0TKUAB 45

BM3V

• The contacts operate only when the MMS has tripped due to

a short-circuit.

• When these contacts operate, the blue reset button extends

out, and a trip indication is displayed.

• The power to the MMS can be turned ON after pressing the

reset button.

Note: Operation can be checked with the test trip function.

Be sure to press the reset button before mounting to the MMS.

• Short-circuit alarm contact block (KI)

AF01-56

Description Starter Mounting Coil voltage Part number Mass

type (g)

BM3R Right 24VAC 50/60Hz BZ0FAZU 115

BM3V 48VAC 60Hz BZ0FBZU

48VAC 50Hz/60VAC 60Hz BZ0FCZU

100VAC 50Hz/100–110VAC 60Hz BZ0F1ZU

110–127VAC 50Hz/120VAC 60Hz BZ0FDZU

200VAC 50Hz/200–220VAC 60Hz BZ0FEZU

220–230VAC 50Hz/240–260VAC 60Hz BZ0FFZU

240VAC 50Hz/277VAC 60Hz BZ0FGZU

380–400VAC 50Hz/400–440VAC 60Hz BZ0FHZU

415–440VAC 50Hz/460–480VAC 60Hz BZ0F4ZU

500VAC 50Hz/600VAC 60Hz BZ0FJZU

24–60V DC * BZ0FKZUD

110-240V DC * BZ0FLZUD

AF01-55

• Shunt trip devices (F)

This device is used to remotely trip the MMS.

Notes:

• This device cannot be used together with an

undervoltage trip device.

• When the MMS has been tripped with the shunt

trip device, press the reset button before turning

ON the power.

Note: * The time rating of coil is 5s.

Description Starter Mounting Coil voltage Part number Mass

type (g)

BM3R Right 24VAC 50Hz BZ0RAZ1U 115

BM3V 24VAC 60Hz BZ0RAZ2U

48VAC 50Hz BZ0RBZ1U

48VAC 60Hz BZ0RBZU

100VAC 50Hz/100–110VAC 60Hz BZ0R1ZU

110–127VAC 50Hz/120VAC 60Hz BZ0RDZU

200VAC 50Hz/200–220VAC 60Hz BZ0REZU

220–230VAC 50Hz/240–260VAC 60Hz BZ0RFZU

240VAC 50Hz/277VAC 60Hz BZ0RGZU

380–400VAC 50Hz/400–440VAC 60Hz BZ0RHZU

415–440VAC 50Hz/460–480VAC 60Hz BZ0R4ZU

500VAC 50Hz/600VAC 60Hz BZ0RJZU

R types

This device automatically trips the MMS

when the control circuit voltage drops below

the specified value.

Notes:

• This device cannot be used together with a shunt

trip device.

• When the MMS has been tripped with the

undervoltage trip device, press the reset button

before turning ON the power.

AF01-54

• Undervoltage trip devices (R)

Optional accessories

Manual Motor Starters

Description Starter Part number Mass

type (g)

BM3R BZ0SET 2.0

BM3V BZ0TCV 0.6

• Others

Push-in lug

Terminal cover for IP20 Prevents accidental contact to charged parts.

6 pcs/pack

Used for screw mounting.

10 pcs/pack

Description Starter Handle type Part number Mass

type (g)

BM3RH Standard BZ0VBBL 160

(black)

Emergency BZ0VYRL 160

(red/yellow)

BM3V Standard BZ0VBBM 160

(black)

Emergency BZ0VYRM 160

(red/yellow)

• Used to operate an MMS installed inside a panel, from the

outside of the panel.

• Equipped with an interlock mechanism that prevents someone

from mistakenly opening the panel door when the MMS is in the

ON state.

• The shaft can be cut to match the distance between the MMS

and the panel door.

• Door interlock function • OFF lock function

• Can be locked OFF with up to three padlocks.

Note: Padlocks not included.

• Release screw allows the door to be opened with the handle in

the ON position.

• IP54 enclosure

• External operating handles

KK02-306

KK02-305

Description Starter Part number Mass

type (g)

BM3R BZ0TCRE 30

Used for making Type E or Type F condition

• Line side terminal cover

BM3R BZ0CFG 1.4

BM3V

• Used to cover the open space if an internally

mounted accessory should become unnecessary.

• Mounts

• 10 pcs/pack

to either the left-front or right-front position.

Dummy cover

KK02-39

Optional accessories

Manual Motor Starters

Accessory type

Part number

Auxiliary contact Auxiliary contact Alarm contact Aux. and alarm Short-circuit alarm

block/front block/side block contact block contact block

BZ0WI BZ0WU BZ0KI BZ0WKU BZ0TKUAB

Standard IEC 60947-5-1, UL 508

Rated operational current 48V

AC AC-15 5 6 5 6 6

(A) 125V AC 3 4 3 4 4

230V AC 1.5 41.5 4 4

400V AC – 2.2 –2.2 2.2

500V AC – 1.5 –1.5 1.5

690V AC – 0.6 –0.6 0.6

48V

DC DC-13 1.38 51.38 5 5

110V

DC 0.55 1.3 0.55 1.3 1.3

220V

DC 0.27 0.5 0.27 0.5 0.5

Contact rating code UL 508 B300 A600 B300 A600 A600

Q300 P300 Q300 P300 P300

Min. voltage and current 17V 5mA

Ratings of accessories

Accessory type Shunt trip device Undervoltage device

BZ0F BZ0R

Standard IEC 60947-1, UL 508

Rated insulation voltage IEC 60947 690

(V AC) UL 508 600

No. of ON-OFF operations 5000

Operating time (ms) 20

Power consumption Inrush (VA/W)

21/12

Sealed (VA/W) 8/1.2

Voltage range Tripping voltage (V) 0.7 to 1.1Ue 0.35 to 0.7Ue

Closing voltage (V) – 0.85 to 1.1Ue

Time rating of coil (s) AC: Continuous AC: Continuous

DC: 5

Part number

Optional accessories

Note: Ue: Rated Voltage

Manual Motor Starters

Available accessory configuration

External

device

(Right)

External

device

(Left)

Internal device

MMS

(Left)

(Right)

KW+W W+K

W2W

W2W W2K W2WW W2WK

W2 W2W

W2W W2K W2WW W2WK W2 W2W

W2W W2K W2WW W2WK

W2F

W2R

W2WF

W2WF W2KF W2WWF W2WKF

W2WR

W2WR W2KR W2WWR W2WKR

WKF WKWF

WKWF WKKF WKWWF WKWKF

WKR WKWR

WKWR WKKR WKWWR WKWKR

WK WKW

WKW WKK WKWW WKWK

KI KIW

KIW KIK KIWW KIWK

FWF

WF KF WF

WF KF

WWF WKF

RWR

WR KR WWR WKR

KIF KIWF KIKF KIWWF KIWKF

KIWF

KIR KIWR KIKR KIWWR KIWKR

KIWR

W2W2 W2W2W W2W2K W2W2WW W2W2WK

W2W2W

W2W2 W2W2W W2W2K W2W2WW W2W2WK

W2W2W

KW+W W+K

W2W

W2W W2K W2WW W2WK

W2F

W2R

W2WF

W2WF W2KF W2WWF W2WKF

W2WR

W2WR W2KR W2WWR W2WKR

WKF WKWF

WKWF WKKF WKWWF WKWKF

WKR WKWR

WKWR WKKR WKWWR WKWKR

WK WKW

WKW WKK WKWW WKWK

KI KIW

KIW KIK KIWW KIWK

FWWF WKF

RWR

WR KR WWR WKR

KIF KIWF KIKF KIWWF KIWKF

KIWF

KIR KIWR KIKR KIWWR KIWKR

KIWR

W2W2 W2W2W W2W2K W2W2WW W2W2WK

W2W2W

W2W2 W2W2W W2W2K W2W2WW W2W2WK

W2W2W

Adj. thermal-magnetic trip type MMS

Internal accessory

External accessory

BM3RSB, BM3RHB BM3VSB, BM3VHB

(Left)

(Right)

W2 (Left)+F

W2 (Left)+R

WK+F

WK+R

KI+F

KI+R

W2 (Left)+

W2 (Left)

W2 (Left)+

W2 (Right)

Shunt trip device (F) Undervoltage trip device (R)

Internal devices

Auxiliary contact block (W) Alarm contact block (K)

External devices

Auxiliary contact (W2) Short-circuit alarm contact block (KI)

Auxiliary and alarm contact block (WK)

Optional accessories

Manual Motor Starters

Available accessory configuration (continued)

Internal accessory

External accessory

Adj. thermal-magnetic trip type MMS

Shunt trip device (F) Undervoltage trip device (R)

Internal devices

Auxiliary contact block (W) Alarm contact block (K)

External devices

Auxiliary contact (W2) Short-circuit alarm contact block (KI)

Auxiliary and alarm contact block (WK)

WKW+W W+K W

WKW+W W+K

W2W2

W2 (Right)+

W2 (Right)

W2 (Left)+

W2W2W

W2W2W W2W2K W2W2WW W2W2WK

W2W2F

W2W2R

W2W2WF

W2W2WF W2W2KF W2W2WWF W2W2WKF

W2W2WR

W2W2WR W2W2KR W2W2WWR W2W2WKR

W2WKF W2WKWF

W2WKWF W2WKKF W2WKWWF W2WKWKF

W2WKR W2WKWR

W2WKWR W2WKKR W2WKWWR W2WKWKR

W2WK W2WKW

W2WKW W2WKK W2WKWW W2WKWK

W2WK W2WKW

W2WKW W2WKK W2WKWW W2WKWK

W2KI

W2KIW

W2KIW W2KIK W2KIWW W2KIWK

W2KIW

W2KIW W2KIK W2KIWW W2KIWK

W2KI

KIWK KIWKW

KIWKW KIWKK KIWKWW KIWKWK

W2KIF W2KIWF W2KIKF W2KIWWF W2KIWKF

W2KIWF

W2KIR W2KIWR W2KIKR W2KIWWR W2KIWKR

W2KIWR

KIWKF KIWKWF KIWKKF KIWKWWF KIWKWKF

KIWKWF

KIWKR KIWKWR KIWKKR KIWKWWR KIWKWKR

KIWKWR

W2W2 W2W2W

W2W2W W2W2K W2W2WW W2W2WK

W2W2F

W2W2R

W2W2WF

W2W2WF W2W2KF W2W2WWF W2W2WKF

W2W2WR

W2W2WR W2W2KR W2W2WWR W2W2WKR

W2WKF W2WKWF

W2WKWF W2WKKF W2WKWWF W2WKWKF

W2WKR W2WKWR

W2WKWR W2WKKR W2WKWWR W2WKWKR

W2WK W2WKW

W2WKW W2WKK W2WKWW W2WKWK

W2WK W2WKW

W2WKW W2WKK W2WKWW W2WKWK

W2KI

W2KIW

W2KIW W2KIK W2KIWW W2KIWK

W2KIW

W2KIW W2KIK W2KIWW W2KIWK

W2KI

KIWK KIWKW

KIWKW KIWKK KIWKWW KIWKWK

W2KIF W2KIWF W2KIKF W2KIWWF W2KIWKF

W2KIWF

W2KIR W2KIWR W2KIKR W2KIWWR W2KIWKR

W2KIWR

KIWKF KIWKWF KIWKKF KIWKWWF KIWKWKF

KIWKWF

KIWKR KIWKWR KIWKKR KIWKWWR KIWKWKR

KIWKWR

BM3RSB, BM3RHB BM3VSB, BM3VHB

W2 (Right)+

W2 (Left)+

W2 (Right)+

KI+WK

W2 (Left)+

W2 (Left)+F

W2 (Left)+

W2 (Left)+R

W2 (Left)+

WK+F

W2 (Left)+

WK+R

W2 (Left)+

KI+F

W2 (Left)+

KI+R

KI+WK+F

KI+WK+R

External

device

(Right)

External

device

(Left)

Internal device

MMS

Optional accessories

• Auxiliary contact blocks, side mounting

BZ0WU

18.7

M3.5

70.4

53.6

47.2

48.7

35.7

2.8

2.3

• Auxiliary and alarm contact blocks

BZ0WKU

35.7

18.7

M3.5

70.4

53.6

47.2

48.7

Indication

window

2.8

2.3

Dimensions, mm

• Rotary handle types BM3RHB

ø5

75.3 3.7

14.3 14.3

5.5

3.3

14.3

105

For mounting

screw

35mm top hat rail

Hight 15mm

• Rocker handle types BM3RSB

14.3

5.5

14.3

ø5

13.5

105

14.3

35mm DIN rail

Hight 15mm

62.3 3.7

For mounting

screw

• Rotary handle types BM3VSB, BM3VHB

92.3

107.8

88.3

4.281.3

16.5

110

3.3

4.5

120

16.5

ø5

5.5

33.8

35mm DIN rail

Hight 15mm

Accessories

• Auxiliary contact blocks, front mounting

BZ0WI

M3.5

21.5 10.5

16.7

38.8

8.518.9

• Alarm contact blocks, front mounting

BZ0KI

M3.5

21.5 10.5

8.518.9

16.7

38.8

Manual Motor Starters

Dimensions

Accessories

• Short-circuit alarm contact block

BZ0TKUAB

35.7

48.7

18.7

M3.5

Reset button

2.8

70.4

53.6

47.2

2.3

MMS with accessories

• BM3RSB + BZ0• BZ0TCRE

Type E construction

• BM3RSB • BM3RHB

10.5

45 18 71

62.3 3.7

•BM3RHB + BZ0

45 18

62.3

75.3 3.7

10.5

• Shunt trip devices BZ0F

Undervoltage trip devices BZ0R

2.3

70.4

47.2

M3.5

48.7

18.7 5.2

2.8

• BM3V B + BZ0

55 1818

110

120

92.3

107.8 4.2

79.3

13.3

Manual Motor Starters

Dimensions

Dimensions, mm

MMS

BM3RSB

Line side terminal cover

BZ0TCRE

Short-circuit alarm

contact block

BZ0TKUAB

Mass (g)

425

MMS

BM3RHB

Line side terminal cover

BZ0TCRE

Short-circuit alarm

contact block

BZ0TKUAB

Mass (g)

445

47.3

68.3

3.7

62.3

For mounting screw

49.3

58.3

5.5

47.5

13.5

47.3

75.3

68.3

3.7

62.3

For mounting screw

5.5

3.3

49.3

58.3

47.5

10.8

35.5

10.5

5.4 13

55.5

1L2

35L3

3-ø7.5

Type X min.  X max.

BZ0VBBL, BZ0VYRL 139 ±2 289 ±2

BZ0VBBM, BZ0VYRM 156 ±2 306 ±2

Panel

3.3

5.5

Mounting screw

Shaft

Top of handle

Panel thickness 1.5 to 5

of handle

of MMS

MMS

handle

Min. 75

Door hinge

Max. 68

Type

BM3RH

BM3V

48.5

58.5

4-ø3.5

ø5

ø28

52.6

Locked

handle

External operation handle BZ0V

Panel drilling

Manual Motor Starters

Dimensions

Dimensions, mm

85.3

79.3

13.3

107.8

92.3

88.3

81.3

78.6

4.2

110

120

47.3

3.3

5.5

955

Type E construction

• BM3VSB, BM3VHB

MMS

BM3VSB,VHB

Line side terminal cover

Short-circuit alarm

contact block

BZ0TKUAB

Mass (g)

 825

Wiring diagrams

• MMS

T1 T2 T3

2 4 6

• Auxiliary contact blocks

Front mounting

BZ0WIA BZ0WIB

11(21)

12(22)

13(23)

14(24)

• Alarm contact blocks

Front mounting

BZ0KIBBZ0KIA

• Undervoltage trip devices

BZ0R

• Short-circuit alarm contact blocks

BZ0TKUAB

• Shunt trip devices

BZ0F C1

53(153)

63(163)

54(154)

64(164)

BZ0WUAAL BZ0WUABL BZ0WUBBL

BZ0WUAAR BZ0WUABR BZ0WUBBR

43(143)

33(133)

34(134)

44(144)

43(143)

31(131)

32(132)

44(144)

41(141)

32(132)

42(142)

31(131)

51(151)

63(163)

52(152)

64(164)

51(151)

61(161)

52(152)

62(162)

Side mounting • Auxiliary and alarm contact blocks

BZ0WKUAB

BZ0WKUBB

BZ0WKUBA

BZ0WKUAA

Manual Motor Starters

Dimensions

Standard operating conditions

Ambient Operating: –5 to +55 C

temperature Storage: –40 to +65 C

Humidity 45 to 85%RH

Altitude 2000m or lower

Atmosphere No excessive dust, smoke, corrosive gases, flammable

gases, steam or salt.

Vibration 10 to 55Hz 15m/s2

Shock 50m/s2

Type Rated operational Min. distance to grounded

voltage Ue metal (mm)

(V) A, B C, D

BM3RS Up to 460 15 20

500 15 30

Up to 690 40 40

BM3RH Up to 500 15 30

Up to 690 40 50

BM3V Up to 500 15 40

Up to 690 40 50

Mountings

• Rail mounting

The MMS can be mounted to a 35mm DIN rail. Secure the

rail with screws at mounting pitch of less than 400mm for the

BM3R type and less than 300mm for the BM3V type.

Applicable rail:

Use a 15mm-high TH35-15 (FUJI model TH35-15AL) rail

conforming to EN-50022 and IEC715.

The standard rail mounting direction is horizontal. When using

the MMS on a vertically mounted rail, use FUJI end clamp kits.

Mounting Removing

15mm

35mm wide rail

Snap

ø5mm or less

• Screw mounting

The separately sold push-in lug (BZ0SET) is required for

screw mounting the BM3R frame. The BM3V frame can be

screw mounted directly to the panel.

BM3RSB BM3VSB

BM3RHB BM3VHB

Push-in lug

BZ0SET

Mounting angle

180 180

When frames are mounted side-by-

side, operating conditions such as a

high ambient temperature or using

the maximum setting for continuous

current may cause slight changes in

operating characteristics due to

temperature rises.

Under such conditions, it is

recommended that the frames be

separated by at least 5mm.

Type BM3R BM3V BZ0

Accessories

Solid wire (mm) ø1.6 to 2.6 ø1.6 to 2.6 ø1 to 1.6

Stranded Single-wire 1 to 10 1 to 25 0.5 to 2.5

wire (mm2)2-wire 1 to 6 1 to 16 0.5 to 2.5

AWG Single-wire 18 to 8 18 to 4 18 to 14

2-wire 18 to 10 18 to 4 18 to 14

Sheath stripping Approx.10 Approx.13 Approx.10

length (mm)

Terminal screw Pan head Pan head Pan head

screw (PZ2) screw (PZ2) screw (PZ2)

M4 M6 M3.5

Tightening torque 2 4 0.8

(N·m)

Arc space

The arc space required when mounting is shown in the table

below.

Wirings

While pressing the wire with a screwdriver, tighten the screw

to the specified tightening torque.

No sudden temperature

changes resulting in

condensation or icing.

No abnormal shock or

vibration

Note: There is no need for a crimp terminal or any other terminal on the end of

the connection wire.

Grounded metal

Manual Motor Starters

Instructions

Description Used with Specification Part number Mass (g)

Busbar BM3R Continuous current: 2-BM3R, modular space: 45mm BZ0BR02A 30

64A max. 3-BM3R, modular space: 45mm BZ0BR03A 50

Pin connection 4-BM3R, modular space: 45mm BZ0BR04A 70

5-BM3R, modular space: 45mm BZ0BR05A 90

BM3R+1-external 2-BM3R, modular space: 54mm BZ0BR12A 30

accessory, 9mm wide 3-BM3R, modular space: 54mm BZ0BR13A 55

4-BM3R, modular space: 54mm BZ0BR14A 80

5-BM3R, modular space: 54mm BZ0BR15A 105

BM3R+2-external Continuous current: 2-BM3R, modular space: 63mm BZ0BR22A 45

accessory, 9mm wide 64A max. 4-BM3R, modular space: 63mm BZ0BR24A 100

or Fork connection

BM3R+1-external

accessory, 18mm wide

BM3V Continuous current: 2-BM3V, modular space: 55mm BZ0BV02A 140

126A max. 3-BM3V, modular space: 55mm BZ0BV03A 240

Pin connection 4-BM3V, modular space: 55mm BZ0BV04A 340

BM3V+1-external 2-BM3V, modular space: 64mm BZ0BV12A 150

accessory, 9mm wide 3-BM3V, modular space: 64mm BZ0BV13A 270

4-BM3V, modular space: 64mm BZ0BV14A 380

BM3V+2-external 2-BM3V, modular space: 73mm BZ0BV22A 165

accessory, 9mm wide 4-BM3V, modular space: 73mm BZ0BV24A 425

BM3V+1-external

accessory, 18mm wide

3-phase feed-in terminal BM3R Continuous current: 64A max. BZ0BFRA 40

Applicable cable size: 25mm2 max.

BM3V Continuous current: 126A max. BZ0BFVA 170

Applicable cable size: 50mm2 max.

BZ0BR For pin connection BZ0BCRA 10

For fork connection BZ0BCRB 5

BZ0BV For pin connection BZ0BCVA 5

Features

•The busbar system reduces wiring time and saves

floorspace.

The busbar makes it easy to power from 2 to 5 manual motor

starters – with no wiring needed.

The 3-phase feed-in terminals are used to connect the wire

for the power supply circuit.

The busbar cover guards against accidental contact with non-

connected busbar terminals (charged parts).

<Note>

If using BZ0TCRE terminal cover with BM3R series MMS, the busbar

system can not be used.

•

Busbar cover

Busbar

3-phase feed-in

terminals

Manual motor

starter

Connecting

module

Contactor

Reverse connection kit

KK02-159

Part number and ratings

AF01-70R

AF01-70L

KK02-164

Busbar cover

Manual Motor Starters

Busbar system

Dimensions, mm

• For BM3R

BZ0BR0 Without external accessory

125

170

215

12.5

27.5

2 4

1414

13.5

BZ0BR02A: 80mm

BZ0BR03A: 125mm

BZ0BR04A: 170mm

BZ0BR05A: 215mm

BZ0BR1 With 1-external accessory

12.5

14 14

27.5

13.5

197

143

2 4

251

BZ0BR12A: 89mm

BZ0BR13A: 143mm

BZ0BR14A: 197mm

BZ0BR15A: 251mm

BZ0BR2 With 2-external accessory, 9mm wide

With 1-external accessory, 18mm wide

14 14

4.5

235

109

32.5

1.5

BZ0BR22A: 109mm

BZ0BR24A: 235mm

• For BM3V

BZ0BV0 Without external accessory

17 17

42.5

205

151

16 20

BZ0BV02A: 97mm

BZ0BV03A: 151mm

BZ0BV04A: 205mm

BZ0BV1 With 1-external accessory, 9mm wide

17 17

2.5

232

106

169

BZ0BV12A: 106mm

BZ0BV13A: 169mm

BZ0BV14A: 232mm

BZ0BV2 With 2-external accessory, 9mm wide

With 1-external accessory, 18mm wide

260

17 17

2.5

116

BZ0BV22A: 116mm

BZ0BV24A: 260mm

Manual Motor Starters

Busbar system

BZ0BFVA

(10-4 AWG)

717 17 6

17 17

48.5

10-50mm

Hexagon socket head bolt

Dimensions, mm

• 3-phase feed-in terminals

BZ0BFRA

38.5

1.5

14.514.5

314.5 14.5 3.8

1.9

13.5 5

6.5

44.5

6-25mm2

(10-4 AWG)

Manual Motor Starters

Busbar system

Features

•

Accommodates a variety of manual motor starters

(BM3RSB-P16 to 025). Put the manual motor starter inside

an enclosure for use in harsh environments. Surface

mounting and flush mounting types available.

IP41 and IP55 enclosure protection degree available.

Manual motor starters (BM3RSB-P16 to 025) equipped with

internal accessories and the following external accessories

can be used inside an enclosure.

Left side: One auxiliary contact block (W) or one auxiliary

and alarm contact block (WK)

Right side:

A wide variety of enclosure accessories are available.

Padlocking device, emergency mushroom head pushbutton,

conversion kit, and indicator lamps.

One shunt trip device (F) or one undervoltage trip

device (R)

Part number and ratings

Enclosures for BM3RSB-P16 to 025

Mounting Specification

Part number

Mass (g)

Surface IP41 BZ0CSLA 320

IP55 (with conversion kit) BZ0CSLB 340

Flush IP41 BZ0CFLA 240

IP55 (with conversion kit) BZ0CFLB 260

Accessories for enclosures

Description Specification Part number Mass (g)

Padlocking device OFF locking possible using up to three padlocks with a 5 to 8mm shackle diameter. BZ0CKA 90

Emergency pushbutton Momentary BZ0CPM 55

Push-lock turn reset BZ0CPL 55

Key operated BZ0CPK 90

Conversion kit Converts IP41 to IP55 BZ0CCA 25

Adaptor set For BM3RS + undervoltage trip device with auxiliary contact. BZ0CUA 20

Neutral connector Used inside the enclosure for neutral and ground connection. BZ0CNA 10

Indication lamp Green, 100–120V AC BZ0CLGA 15

Green, 200–240V AC BZ0CLGB 15

Green, 380–440V AC BZ0CLGC 15

Green, 480–500V AC BZ0CLGD 15

Green, 500–600V AC BZ0CLGE 15

Red, 100–120V AC BZ0CLRA 15

Red, 200–240V AC BZ0CLRB 15

Red, 380–440V AC BZ0CLRC 15

Red, 480–500V AC BZ0CLRD 15

Red, 500–600V AC BZ0CLRE 15

White, 100–120V AC BZ0CLCA 15

White, 200–240V AC BZ0CLCB 15

White, 380–440V AC BZ0CLCC 15

White, 480–500V AC BZ0CLCD 15

White, 500–600V AC BZ0CLCE 15

Surface mounting

enclosure

Flush mounting

enclosures

Padlocking device

Emergency pushbuttons

Adaptor set

Neutral connector Conversion kits

IP41 to IP55

Indication lamps

Notes: • The padlocking device cannot be used together with the emergency pushbutton or undervoltage trip device with auxiliary contact.

• The emergency pushbutton cannot be used together with the undervoltage trip device with auxiliary contact.

Manual Motor Starters

Enclosures

Dimensions, mm

• Surface mounting

For without accessory

ø4.5

145

20.4

1.5 150 2.2

ø2

69 28 1.6

18.8

155

7.852

For with padlocking device

17.8

ø8.5

150

155

167.5

11.5

Non locked OFF locked

Padlocks

with max. 8mm dia.

11.5

20.4

18.8

ø4.5

145

11.8

2.2

150

12.5

69 28

113

1.5

ø4.5

1.6

ø2

For with emergency pushbutton

Push-locked

Non locked

X dimensions

Momentary

Push-lock turn reset

With key

Without key

ø4.5

30 69

2.2

150

128

145

155

13.552

20.4

98 1.6

18.8

ø2

1.5

• Flush mounting

For without accessory

82.5

125*

81.5*

15.6

115

96.5

139

Max. 6

Min. 1.5

18.8

7.852

82–84

R3 max.

126–128

Panel cutting

For with padlocking device

ø8.5

OFF lockedNon locked

23 162

125*

81.5*

30.5

15.6

82.5

115

12.5

139

7.852

96.5

18.8

Max. 6

Min. 1.5

11.5 11.5

Padlocks

with

max. 8mm

dia. 82–84

R3 max.

126–128

Panel cutting

For with emergency pushbutton

18 81.5*

40.1

18.8

15.6

13.552

139

115

125*

Max. 6

Min. 1.5

82.5

96.5

Push-locked

Non locked

X dimensions

Momentary

Push-lock turn reset

With key

Without key

82–84

R3 max.

126–128

Panel cutting

Manual Motor Starters

Dimensions

Contactors SC-M and SC-E series

3 to 100HP at 480V AC

The SC-M and SC-E series further enhance the high reliability of the SC series

with full conformance to International standards.

International standardization

IEC 60947-4-1, EN 60947-4-1, VDE 0660

[Approved cUL (File No. E42419, E44592),

TÜV (R2018010, R2150072, R50013402)]

508, CSA C 22.2, JIS C 8201-4-1

Compactness

• SC-M01, M02: 45mm wide

SC-E02 to E05: 43mm wide, SC-E1 to E2S: 54mm wide

SC-E3,

SC-E6: 100mm wide, SC-E7: 115mm wide

E4: 67mm wide, SC-E5: 88mm wide

• Reducing mounting area

Safety

• Terminals with finger-touch protection (DIN 57106/

VDE 0106 Teil100)

Utility

• Box lug terminal construction

• Long electrical life

• Reduction of wiring work

Ecology

• Reducing power consumption

• Recycled thermoplastic resin used for plastic parts.

• The names of materials are indicated on all major

parts to facilitate their recycling.

In addition to the five basic concepts of the existing SC series

magnetic contactors and motor starters — international

standardization, compactness, safety, utility, and ecology —

the SC-M and SC-E series take the line-up to the next step in

utility with a new finger protection terminal and box lug

terminal construction.

45mm 54mm

67mm

111

112

100mm

138

169

SC-M series SC-E series

SC-M01, M02 SC-E1 to E2S SC-E3, E4 SC-E6 with SUPER

magnet

General information

Compactness

Ecology

Safety

Safety Utility

Utility

Contactors SC-M and SC-E series

Quick reference guide

Contactor SC-M01 SC-M02 SC-E02 SC-E03 SC-E04 SC-E05 SC-E1

SC-M01/G SC-M02/G SC-E02/G SC-E03/G SC-E04/G SC-E05/G SC-E1/G

KK02-292 KK02-292 AF01-12 AF01-11 AF01-10 KK01-105 AF01-8

Rating of 3-phase motor

AC operating

DC operating

(HP)

200V 1-1/2 3 2 3 5 5 7 1/2

1-1/2 3 2 3 5 7 1/2 10

3 5 5 7 1/2 10 15 25

220-240V

400-480V

550-600V

Rated operational current (A)

200V

220-240V

400-480V

550-600V

6.9 11 7.8 11 17.5 17.5 25.3

6 9.6 6.8 9.6 15.2 22 28

4.8 7.6 7.6 11 14 21 34

3.9 6.1 6.1 9 11 17 27

Rated thermal current AC-1 (A) 20 20 20 20 25 32 50

Auxiliary contact 1NO, 1NC 1NO, 1NC – – – – –

Dimensions AC operated 45 48 56 43 80 81 54 90 96

W H D (mm) DC operated 45 48 68 43 80 108 54 90 121.5

Standard IEC 60947-1, EN 60947-4-1, VDE 0660, UL 508, CSA C22.2

Thermal overload relay TK-E02 TK-E02 TK-E02 TK-E02 TK-E2

KK01-86 KK01-86 KK01-86 KK01-86 KK01-88

Ampere setting range (A) 0.1–0.15 0.1–0.15 0.1–0.15 0.1–0.15 4–6

0.13–0.2 0.13–0.2 0.13–0.2 0.13–0.2 5–8

0.15–0.24 0.15–0.24 0.15–0.24 0.15–0.24 6–9

0.2–0.3 0.2–0.3 0.2–0.3 0.2–0.3 7–11

0.24–0.36 0.24–0.36 0.24–0.36 0.24–0.36 9–13

0.3–0.45 0.3–0.45 0.3–0.45 0.3–0.45 12–18

0.36–0.54 0.36–0.54 0.36–0.54 0.36–0.54 18–26

0.48–0.72 0.48–0.72 0.48–0.72 0.48–0.72 24–36

0.64–0.96 0.64–0.96 0.64–0.96 0.64–0.96

0.8–1.2 0.8–1.2 0.8–1.2 0.8–1.2

0.95–1.45 0.95–1.45 0.95–1.45 0.95–1.45

1.4–2.2 1.4–2.2 1.4–2.2 1.4–2.2

1.7–2.6 1.7–2.6 1.7–2.6 1.7–2.6

2.2–3.4 2.2–3.4 2.2–3.4 2.2–3.4

2.8–4.2 2.8–4.2 2.8–4.2 2.8–4.2

4–6 4–6 4–6 4–6

5–8 5–8 5–8 5–8

6–9 6–9 6–9 6–9

7–11 7–11 7–11 7–11

9–13 9–13 9–13

12–18 12–18

16–22

20–25

Dimensions W H D (mm) 53 60.5 80.5 54 78.5 97

Standard IEC 60947-1, EN 60947-4-1, VDE 0660, UL 508, CSA C22.2

Contactors SC-M and SC-E series

Contactors SC-E2 SC-E2S SC-E3 SC-E4 SC-E5 SC-E6 SC-E7

SC-E2/G SC-E2S/G SC-E3/G SC-E4/G

AF01-7 AF01-6 AF01-5 AF01-4 AF01-3 AF01-2 AF01-1

Rating of 3-phase motor (HP)

200V 10 15 20 25 30 40 50

15 20 25 30 30 40 50

30 30 50 50 60 75 100

30 30 50 50 75 100 125

Rated operational current (A)

200V

220-240V

400-480V

550-600V

32.2 48.3 63.1 78.2 92 119.6 149.5

42 54 68 80 80 104 130

40 40 65 65 77 96 124

32 32 52 52 77 99 125

Rated thermal current AC-1 (A) 60 65 100 105 150 150 200

Auxiliary contact – – – – 2NO+2NC 2NO+2NC 2NO+2NC

Dimensions AC operated 54 90 96 67 112 111 88 155 132

100 169 138 115 175 140

W H D (mm) DC operated 54 90 121.5 67 112 130

Standard IEC 60947-1, EN 60947-4-1, VDE 0660, UL 508, CSA C22.2

Thermal overload relay TK-E2 TK-E2 TK-E3 TK-E3 TK-E5 TK-E6 TK-E6

KK01-88 KK01-88 KK01-87 KK01-87 KK01-85 KK01-84 KK01-84

Ampere setting range (A) 4–6 4–6 7–11 7–11 18–26 45–65 45–65

5–8 5–8 9–13 9–13 24–36 53–80 53–80

6–9 6–9 12–18 12–18 28–40 65–95 65–95

7–11 7–11 18–26 18–26 34–50 85–125 85–125

9–13 9–13 24–36 24–36 45–65 110–160

12–18 12–18 28–40 28–40 65–95

18–26 18–26 34–50 34–50 85–105

24–36 24–36 45–65 45–65

32–42 32–42 48–68 48–68

40–50 64–80

44–54

Dimensions W H D (mm) 54 78.5 97 68 89.5 107.5

76.5 105 106

100 122 123

Standard IEC 60947-1, EN 60947-4-1, VDE 0660, UL 508, CSA C22.2

Quick reference guide

AC operating

DC operating

Contactors SC-M and SC-E series

Code Coil operating voltage and frequency

24VAC 24V AC 50Hz / 24–26V AC 60Hz

48VAC 48V AC 50Hz / 48–52V AC 60Hz

100VAC 100V AC 50Hz / 100–110V AC 60Hz

110VAC 100–110V AC 50Hz / 110–120V AC 60Hz

120VAC 110–120V AC 50Hz / 120–130V AC 60Hz

200VAC 200V AC 50Hz / 200–220V AC 60Hz

220VAC 200–220V AC 50Hz / 220–240V AC 60Hz

400VAC 380–400V AC 50Hz / 400–440V AC 60Hz

440VAC 415–440V AC 50Hz / 440–480V AC 60Hz

500VAC 480–500V AC 50Hz / 500–550V AC 60Hz

• Super Magnet Coil, SC-E5 to SC-E7

Code Coil operating voltage and frequency

24V 24–25V AC 50/60Hz, 24V DC

48V 48–50V AC 50/60Hz, 48V DC

100V 100–127V AC 50/60Hz, 100–120V DC

200V 200–250V AC 50/60Hz, 200–240V DC

400V 380–450V AC 50/60Hz

500V 460–575V AC 50/60Hz

Available coil

• AC coil, SC-M01 to SC-M02 and SC-E02 to SC-E4

Code Coil operating voltage

12VDC 12V DC

24VDC 24V DC

48VDC 48V DC

100VDC 100V DC

110VDC 110V DC

200VDC 200V DC

•

DC coil, SC-M01/G to SC-M02/G and SC-E02/G to SC-E4/G

• DC operation

Frame size Power consumption (VA) Power loss (W) Pick-up voltage (V) *1Drop-out voltage (V) *1Operating time (ms)

Inrush Sealed Coil ON Coil OFF

50/60 Hz 50/60 Hz 50Hz 60Hz Contact ON

Contact OFF

M01, M02  32/36 6/6 1.5 1.6 0.8–1.1 X US 0.35–0.55 X US 7–12 6–13

 90/95 9/9 2.7 2.8 0.85–1.1 X US 0.2–0.75 X US 9–20 5–16

 120/135 12.7/12.4 3.6 3.8 0.85–1.1 X US 0.2–0.75 X US 10–17 6–13

 180/190 13.3/13.4 4.5 5 0.85–1.1 X US 0.2–0.75 X US 10–18 8–18

 80/95 4/4.6 3.2 3.6 0.85–1.1 X US 0.2–0.75 X US 39–45 27–33

 190/230 4.9/5.8 3.4 3.7 0.8–1.1 X US 0.1–0.65 X US 31–37 30–36

E02 to E05

E1 to E2S

E3, E4

E6, E7

Coil characteristics

• AC operation

Frame size Power consumption (VA) Time constant (ms) Pick-up voltage (V) *1Drop-out voltage (V) *1Operating time (ms)

Inrush Sealed Coil ON Coil OFF

Contact ON

Contact OFF

M01/G, M02/G 0.8–1.1 X US 0.2–0.4 X US 24–27 5–8

0.85–1.1 X US 0.1–0.75 X US 45–49 10–26

0.85–1.1 X US 0.1–0.75 X US 40–50 8–17

0.85–1.1 X US 0.1–0.75 X US 60–70 14–21

0.85–1.1 X US 0.1–0.75 X US 35–41 26–32

0.8–1.1 X US 0.1–0.65 X US 28–34 27–33

E02/G to E05/G

E1/G to E2S/G

E3/G, E4/G

E6, E7

Quick reference guide

Note: *1 US: Rated coil voltage

225

2.8

3.2

Frame size Rated insulation Rated thermal Making and breaking current (A)

voltage (V) current (A) AC (rating code A600) DC (rating code Q300)

Voltage Making Breaking Voltage Making Breaking

M01, M02

M01/G, M02/G

600 16

–

120V

240V

480V

600V

1.5

1.2

125V

250V

301-600V

0.55

0.27

0.1

0.55

0.27

0.1

– – – – – – –

E02 to E4, E02/G to E4/G

E5 to E7 600 10 120V

240V

480V

600V

1.5

1.2

125

250V

0.55

0.27

0.55

0.27

Auxiliary contact ratings for UL and CSA

–

Contactors SC-M and SC-E series

Ordering information and Characteristics

Ordering information

Specify the following :

1. Part number

2. Operating coil voltage code

3. Auxiliary contact arrangement (SC-M series only)

-SC-E 24VAC

Operating coil voltage code

(see page 34)

• AC-1 duty / 380 to 440 V AC / SC-M

100

1000

200

300

500

10000

2000

3000

5000

1 2 3 20 30 50 100 5 10

SC-M01

SC-M02

Breaking current (A)

Make / Break operations ( 10

)

• AC-3 duty / 380 to 440 V AC / SC-M

100

1000

200

300

500

10000

2000

3000

5000

1 2 3 20 30 50 100 5 6A 9A 10

SC-M01

SC-M02

Breaking current (A)

Make / Break operations ( 10

)

Electrical durability

-SC-M 01 24VAC - 1NO/G

Aux. contact arrangement

1NO or 1NC required

Operating coil voltage code

(see page 34)

Product

category

Frame size

Quick reference guide and Ordering information

Auxiliary contact ratings

• Based on UL and CSA

Part number Rated insulation Rated thermal Making and breaking current (A)

voltage (V) current (A) AC (rating code B600) DC (rating code R300)

Voltage (V) Making (A) Breaking (A)

TK-E02

TK-E2, E3

TK-E5

TK-E6

600 5 120

240

480

600

7.5

1.5

0.75

0.6

Voltage (V) Making (A) Breaking (A)

120

250

0.22

0.11

0.22

0.11

Operating characteristics (mean value)

• TK-E02

• TK-E2 to E6, E6H

Second  Minute

Reference temperature: 20

Multiple of setting value

0.8

0.6

0.4

0.3

0.8 1 1.5 2 3 4 5 6 7 8 9 10 15

Overcurrent (cold start)

Open-phase

(cold start)

Overcurrent (hot start)

x Ie (A)

Operating time

Second  Minute

Reference temperature: 20

Multiple of setting value

0.8

0.6

0.4

0.3

0.8 1 1.5 2 3 4 5 6 7 8 9 10 15

Overcurrent (cold start)

Open-phase

(cold start)

Overcurrent (hot start)

x Ie (A)

Operating time

Thermal overload relays TK-E series

Characteristics

Optional accessories for TK-E series

• Base units for separate mounting

The base unit modifies thermal overload relays to separate

mounting that can be mounted to 35mm-wide IEC top hat rail

or secured with screws.

Applicable thermal overload relay Type

TK-E02 SZ-HCE

TK-E2 SZ-HDE

TK-E3 SZ-HEE

• Trip indicator

Reports any tripping action at a thermal overload relay through

its LED display.

Applicable thermal Rated voltage Type

overload relay

TK-E02 100–110V AC, 50/60Hz SZ-L100

200–220V AC, 50/60Hz SZ-L200

TK-E2 to TK-E6 100–110V AC, 50/60Hz SZ-L100N2

200–220V AC, 50/60Hz SZ-L200N2

• Reset release button

Reset a thermal overload relay from the rear side of the board

or a distant location.

Applicable thermal Load length Type

overload relay (mm)

TK-E02 300 SZ-R1

500 SZ-R2

700 SZ-R3

TK-E2 to TK-E6 300 SZ-R4

500 SZ-R5

700 SZ-R6

Base unit

SZ-HDE

Trip indicator

SZ-L200N2

KK01-108 AF00-291

Reset release button

SZ-R1

Dial cover

SZ-DA

AF88-585 AF88-1056

• Dial cover

Protects the setting current value of a thermal overload relay

from being changed unintentionally.

Applicable thermal overload relay Type

TK-E02 to TK-E6 SZ-DA

Thermal overload relays TK-E series

Optional accessories

TK-E5 On-contactor mounting only

9.8

3232

4.9

20.5 20.5

13.5

10.4

101 5

3.7

76.5

115

105

106

106.5

235

Main terminal

Mounting

hole

2-M4

Aux.

terminal

M3.5(NO)

Aux.

terminal

M3.5(NO)

(Resetting

stroke: 4mm)

Reset button

Mass: 0.37kg

TK-E6 On-contactor mounting only

Aux.

terminal

M3.5(NO)

Reset button

(Resetting

stroke: 4mm)

Aux.

terminal

M3.5(NO)

Main

terminal

107.5

77.5

4.9

32 32

9.8

100

32 18

118

122

Mass: 0.71kg

TK-E6H For separate mounting only

8.5

45.5 14.4

75.5

22.4

32 32

105

15 35

32 32 18

100

118 5 Main

terminal

Aux.

terminal

M3.5(NO)

Mounting hole

2-M5

Aux.

terminal

M3.5(NO)

Reset button

(Resetting stroke: 4mm)

Mass: 0.82kg

Wiring diagrams

3-heater element

(NO) (NC)

97 95

98 96 2/T1 4/T2 6/T3

Dimensions, mm

TK-E02

28 10 13 7.7

46.5

26.5

77 3

M3.5(NC)

Aux.

terminal

Main

terminal

(Resetting

stroke: 3mm)

Reset button

M3.5(NO)

Aux. terminal

Mass: 0.13kg

TK-E2

Aux.

terminal

M3.5(NC)

Main

terminal

Reset button

(Resetting

stroke: 4mm)

M3.5(NO)

592

50.5

16.5 16.5

7.8

67.5

16.5

4.9

10.5

7.3

16.5

78.5

27.5

Aux.

terminal

Mass: 0.25kg

TK-E3

20.5 20.5 13.5

10.4

4.9

20.5

9.8

20.5

55.5

97.5 5

89.5

Aux.

terminal

M3.5(NO)

Reset button

Main

terminal

Aux.

terminal

M3.5(NO)

(Resetting

stroke: 4mm)

Mass: 0.34kg

149

Contactor

SC-E1 to E2S

SC-E1/G to E2S/G

–

123

63.5

180

Contactor

SC-E3, E4

SC-E3/, E4/G

107.5

–

126.5

79.5

266.5

274

Contactor

SC-E6

SC-E7

123

124

129

Contactor

SC-E02 to 05

SC-E02/G to 05/G

80.5

–

107.5

127.5

Thermal overload relays TK-E series

Dimensions

Dimensions, mm

• Base units for separate mounting

SZ-HCE

Mounting

hole

2-M4

Main

terminal

67.5

813 13

5.5

Mass: 55g

SZ-HDE

Main

terminal

Mounting

hole

2-M4

14.2 4.5

7.3

16.5 16.510.5

8.5 75.5

8.5

100.5

Mass: 0.1kg

SZ-HEE

Main

terminal

Mounting

hole

2-M4

100

109.5

10.4

20.5 20.513.5

8.5 78

104

8.5

106

Mass: 0.15kg

• Trip indicators

SZ-L100, L200

3.5

Approx.440

8 3

Approx.140

SZ-L100N2, L200N2

Approx.450

Approx.250

• Reset release button

SZ-R1, R2, R3

12 8

Locking nut

M10

Reset

button

L 23.5

6.5

Panel drilling 10.5 to 11

Type

SZ-R1

SZ-R2

SZ-R3

300

500

700

SZ-R4, R5, R6

6.5

Locking nut

M10

Reset

button

Type

SZ-R4

SZ-R5

SZ-R6

300

500

700

Panel drilling 10.5 to 11

• Dial cover

SZ-DA

Thermal overload relays TK-E series

Dimensions

Standard operating conditions

The thermal overload relays are manufactured for use in the

standard operating conditions given in the table at the right.

Consult FUJI before using the thermal overload in different

conditions.

Wiring

• Connection wires and terminal processing

Be sure to perform wiring correctly referring to the

connection diagram. Main terminals for models TK-E02 to

TK-E6 are wired using solid wires or stranded wires.

Stranded wires or flexible stranded wires can be connected

by twisting them together crimping a sleeve (ferrule) onto

them before connecting.

• Tightening torque

If wires are not tightened sufficiently, they may become hot or

come loose and result in a fire, short-circuit, electric shock, or

some other potentially dangerous situation. Be sure to tighten

the wires to the torques specified in the tables below.

•Wire sizes, tightening tools, tightening torques

Main circuit

Thermal overload relay type

Base unit type

Solid wire

(mm

)

Stranded wire

(mm

)

AWG

Sheath stripping length

(mm)

Terminal screw size

Tool

Tightening torque [N·m(lb·in)]

TK-E02

SZ-HCE

0.75 to 4

1 to 4

0.75 to 4

1 to 4

12 max.

Phillips screwdriver, H-type, No. 2

(ISO 8764)

–

Flat-blade screwdriver, 1 5.5 L-type, B

(ISO 2830)

1.2 to 1.5 (11 to 13)

One

Two

One

Two

One

Two

Operating: –5 to 55˚C



No sudden temperature changes resulting in

 condensation or icing (The average temperature over

 a 24-hour period must not exceed 35˚C)

Storage:

–40 to 65˚C

45 to 85%RH

No excessive dust, smoke, corrosive gases,

flammable gases, steam, or salt

10 to 55Hz 15m/s2

50m/s2

Ambient

temperature

Humidity

Atmosphere

Vibration

Shock

Control circuit

Single stranded 

wire (mm

)

AWG

Sheath stripping length

(mm)

Fork terminal

Terminal screw size

Tool



Tightening torque [N·m(lb·in)]

0.75 to 2.5 (ø1 to ø1.6)

0.75 to 2.5

18 to 14

Max. 7.7mm wide (R2-3.5)

M3.5

Phillips screwdriver, H-type, No. 2

(ISO 8764)

Flat-blade screwdriver, 1 5.5 L-type, B

(ISO 2830)

0.8 to 1 (7 to 9)

One

Two

One

Two

Thermal overload relay type

Base unit type

Single stranded wire (mm

) *

Flexible stranded wire with sleeve (mm

) *

Flexible stranded wire without sleeve (mm

)

AWG

TK-E2

SZ-HDE

0.75 to 16

6 max.

Phillips screwdriver, H-type, No. 2

(ISO 8764)

–

Flat-blade screwdriver, 1 5.5 L-type, B

(ISO 2830)

2.5

TK-E3

SZ-HEE

1.5 to 35

2 max.

Hex. wrench 4 (ISO 2936)

TK-E5

–

TK-E6, E6H

–

16 to 70

00 max.

Sheath stripping length (mm)

Tool

Tightening torque (N·m)

Notes: *1Stranded wire (0 to 25mm2) consists of 7 wires or less.

Stranded wire (35 to 120mm2) consists of 19 wires or less.

Flexible stranded wire consists of more number wires than the above.

Thermal overload relays TK-E series

Instructions

Combination Starters

KK02-162 KK02-152

Features

•

The user can assemble a combination starter by combining a

BM3 series manual motor starter and an SC series magnetic

contactor according to the load motor capacity.

The manual motor starter provides overload, phase-loss, and

short-circuit protections for the motor circuit, and

incorporates a dial for flexible adjustment to match the total

load current of the motor.

The magnetic contactor allows remote ON/OFF operation of

the motor circuit with high frequency, and features a electrical

durability of one million operations.

The manual motor starter and magnetic contactor are

connected via link module and mounted to a base plate. BM3RSB-010 + SC-M02 BM3VHB-050 + SC-E2S

Combinations meeting for North American market

• BM3RSB, BM3RHB (General)

Quick reference guide

•

220-240V AC 440-480V AC

1/2

3/4

1-1/2

7-1/2

2.2

3.2

9.6

15.2

3/4

7-1/2

1.6

2.1

3.4

4.8

7.6

BM3RSB-P16

BM3RSB-P25

BM3RSB-P40

BM3RSB-P63

BM3RSB-001

BM3RSB-1P6

BM3RSB-2P5

BM3RSB-004

BM3RSB-6P3

BM3RSB-010

BM3RSB-013

BM3RSB-016

BM3RSB-020

BM3RSB-025

BM3RSB-032

BM3RHB-P16

BM3RHB-P25

BM3RHB-P40

BM3RHB-P63

BM3RHB-001

BM3RHB-1P6

BM3RHB-2P5

BM3RHB-004

BM3RHB-6P3

BM3RHB-010

BM3RHB-013

BM3RHB-016

BM3RHB-020

BM3RHB-025

BM3RHB-032

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE32AA

BZ0LRE32GA

BZ0BPRE22A

BZ0BPRE32A

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M02, M02/G

SC-E02

SC-E02/G

SC-E03

SC-E03/G

SC-E04

SC-E04/G

SC-E04

SC-E04/G

SC-E05

SC-E05/G

SC-E1

SC-E1/G

MMS part number Contactor 

part number

Link module Base plate

HP rating

(HP)

Rated

current (A)

HP rating

(HP)

Rated

current (A)

Part number

0.1-0.16

0.16-0.25

0.25-0.4

0.4-0.63

0.63-1

1-1.6

1.6-2.5

2.5-4

4-6.3

6.3-10

10-13

11-16

14-20

18-25

24-32

Current

range (A)

Combination Starter

• BM3RSB, BM3RHB (Type F coordination)

To make an application for Type F condition, You need to prepare BZ0TCRE and BZ0TKUAB accessories separately.

Quick reference guide

220-240V AC 440-480V AC

1/2

3/4

1-1/2

7-1/2

2.2

3.2

9.6

15.2

3/4

7-1/2

1.6

2.1

3.4

4.8

7.6

BM3RSB-P16

BM3RSB-P25

BM3RSB-P40

BM3RSB-P63

BM3RSB-001

BM3RSB-1P6

BM3RSB-2P5

BM3RSB-004

BM3RSB-6P3

BM3RSB-010

BM3RSB-013

BM3RSB-016

BM3RSB-020

BM3RSB-025

BM3RSB-032

BM3RHB-P16

BM3RHB-P25

BM3RHB-P40

BM3RHB-P63

BM3RHB-001

BM3RHB-1P6

BM3RHB-2P5

BM3RHB-004

BM3RHB-6P3

BM3RHB-010

BM3RHB-013

BM3RHB-016

BM3RHB-020

BM3RHB-025

BM3RHB-032

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE32AA

BZ0LRE32GA

BZ0BPRE22A

BZ0BPRE32A

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M02, M02/G

SC-E02

SC-E02/G

SC-M02, M02/G

SC-E03

SC-E03/G

SC-E03

SC-E03/G

SC-E04

SC-E04/G

SC-E04

SC-E04/G

SC-E05

SC-E05/G

SC-E1

SC-E1/G

MMS part number Contactor 

part number

Link module

Short-circuit ratings at

480Y/277 AC (kA)

Base plate

HP rating

(HP)

Rated

current (A)

HP rating

(HP)

Rated

current (A)

Part number

0.1-0.16

0.16-0.25

0.25-0.4

0.4-0.63

0.63-1

1-1.6

1.6-2.5

2.5-4

4-6.3

6.3-10

10-13

11-16

14-20

18-25

24-32

Current

range (A)

for BM3RSB for BM3RHB

• BM3VSB, BM3VHB (General)

Combination Starter

Quick reference guide

•

• BM3VSB, BM3VHB (Type F coordination)

•

220-240V AC 440-480V AC

7-1/2

9.6

15.2

7-1/2

7.6

BM3VSB-010

BM3VSB-013

BM3VSB-016

BM3VSB-020

BM3VSB-025

BM3VSB-032

BM3VSB-040

BM3VSB-050

BM3VSB-063

BM3VHB-010

BM3VHB-013

BM3VHB-016

BM3VHB-020

BM3VHB-025

BM3VHB-032

BM3VHB-040

BM3VHB-050

BM3VHB-063

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE65AA

BZ0LVE65GA

BZ0BPVE51A

BZ0BPVE65A

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E2

SC-E2/G

SC-E2S

SC-E2S/G

SC-E3

SC-E3/G

MMS part number Contactor 

part number

Link module Base plate

HP rating

(HP)

Rated

current (A)

HP rating

(HP)

Rated

current (A)

Part number

6.3-10

10-13

11-16

14-20

18-25

24-32

28-40

35-50

45-63

Current

range (A)

To make an application for Type F condition, You need to prepare BZ0TKUAB accessories separately.

220-240V AC 440-480V AC

7-1/2

9.6

15.2

7-1/2

7.6

BM3VSB-010

BM3VSB-013

BM3VSB-016

BM3VSB-020

BM3VSB-025

BM3VSB-032

BM3VSB-040

BM3VSB-050

BM3VSB-063

BM3VHB-010

BM3VHB-013

BM3VHB-016

BM3VHB-020

BM3VHB-025

BM3VHB-032

BM3VHB-040

BM3VHB-050

BM3VHB-063

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE65AA

BZ0LVE65GA

BZ0BPVE51A

BZ0BPVE65A

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E2

SC-E2/G

SC-E2S

SC-E2S/G

SC-E3

SC-E3/G

MMS part number Contactor 

part number

Link module

Short-circuit ratings at

480Y/277 AC (kA)

Base plate

HP rating

(HP)

Rated

current (A)

HP rating

(HP)

Rated

current (A)

Part number

6.3-10

10-13

11-16

14-20

18-25

24-32

28-40

35-50

45-63

Current

range (A)

for BM3VSB for BM3VHB

Combination Starters

Optional accessories

• Link modules

Applicable

MMS

BM3R

BM3V

Applicable magnetic contactor

SC-M01, M02

SC-M01/G, M02/G

SC-E02, E03, E04, E05

SC-E02/G, E03/G, E04/G, E05/G

SC-E1

SC-E1/G

SC-E1, E2, E2S

SC-E1/G, E2/G, E2S/G

SC-E3

SC-E3/G

Operating

coil

 AC

 DC

 AC

 DC

 AC

 DC

 AC

 DC

 AC

 DC

Mass

(g)

 25

 35

 45

 60

 45

 60

 65

 80

Type

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE32AA

BZ0LRE32GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE65AA

BZ0LVE65GA

(No.KK01-153)

The link module connects the

manual motor starter and

magnetic contactor electrically and

mechanically.

Description

MMS

BM3RSB

Link module

Contactor

SC-M01, M02

Combination

starter

MMS

BM3RSB

Link module

Contactor

SC-E02 to E05

Combination

starter

Base plate

MMS

BM3RHB

Link module

Contactor

SC-E04, E05

Combination

starter

Base plate

• Base plates

Applicable

MMS

BM3R

BM3V

Applicable magnetic contactor

SC-E02, E03, E04, E05

SC-E02/G, E03/G, E04/G, E05/G

SC-E1

SC-E1/G

SC-E1, E2, E2S

SC-E1/G, E2/G, E2S/G

SC-E3

SC-E3/G

Operating

coil

 AC

 DC

 AC

 DC

 AC

 DC

 AC

 DC

Mass

(g)

 100

 160

 195

Type

BZ0BPRE22A

BZ0BPRE32A

BZ0BPVE51A

BZ0BPVE65A

(No.KK01-155)

The base plate is a plastic plate to

which the combination starter is

mounted. The base plate can then

be mounted to a panel with screws

or to a DIN rail.

Description

Combination starter configurations

• BM3RSB+SC-M01, M02 • BM3RSB+SC-E02 to E05 • BM3RHB+SC-E04, E05

Optional accessories

• BM3RHB+SC-E1 • BM3VHB+SC-E1 to E2S • BM3VHB+SC-E3

Base plate

MMS

BM3RHB

Link module

Contactor

SC-E1

Combination

starter

MMS

BM3VHB

Link module

Contactor

SC-E1 to E2S

Combination

starter

Base plate

MMS

BM3VHB

Link module

Contactor

SC-E3

Combination

starter

Base plate

Notes for mounting an MMS and contactor

When the manual motor starter and magnetic contactor are

configured as a combination starter, the nameplate ends up

facing the wrong direction because the coil terminal of the

magnetic contactor faces downward. Use the following

procedure to turn the nameplate upside down.

For SC-E02 to SC-E05 magnetic contactors

• Insert a flat-blade screwdriver between the arc-chamber of

the S phase or V phase and the terminal screw, and lift the

arc-chamber to remove it.

• After removing the cover, turn the cover 180 degrees (top to

bottom), then re-mount it onto the magnetic contactor.

• Align the cover with the top and bottom terminals and press

it on firmly by hand.

For SC-E1 to SC-E3 magnetic contactors

• Use a Phillips screwdriver to remove the two screws

securing the front and back bodies.

• Remove the front body and turn it 180 degrees (top to

bottom), then re-mount it with the screws.

• Make sure that no foreign matter enters the interior of the

magnetic contactor during this removal and re-mounting

procedure.

Coil terminal

Combination Starters

Optional accessories

Combination Starters

Dimensions, mm

• Base plates

BZ0BPRE22A

Base plate

type

BZ0BPRE32A

Applicable type

MMS

BM3RSB

BM3RHB

Contactor

SC-E1, E1/G

Mounting hole

3-M4

39 (to 48)

235

247

40125

102.5

4.5

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

Base plate

type

BZ0BPVE65A

Applicable type

MMS

BM3VSB

BM3VHB

Contactor

SC-E3, E3/G

260

270

48 (to 56)

125

102.5

Mounting hole

3-M4

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

Base plate

type

BZ0BPVE51A

Applicable type

MMS

BM3VSB

BM3VHB

Contactor

SC-E1, E2, E2S,

E1/G, E2/G, E2S/G

125

102.5

247

235 5

39 (to 48)

55 Mounting hole

3-M4

4.5

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

BZ0BPRE32A

BZ0BPVE65A

Base plate

type

BZ0BPRE22A

Applicable type

MMS

BM3RSB

BM3RHB

Contactor

SC-E02, E03, E04, E05

E02/G, E03/G, E04/G, E05/G

Mounting hole

3-M4

195

205

40125

(26 to)30

21.3

1 35mm wide rail (hight 15mm) x 2

BZ0BPVE51A

Dimensions

Dimensions, mm

• Combination

BM3RSB + SC-M01, M02

+ SC-M01/G, SC-M02/G

MMS

BM3RSB

Contactors

SC-E02/G, E03/G, E04/G, E05/G

Link module

BZ0LRE22GA

Base plate

BZ0BPRE22A

Mass (g)



1,065

14.3

17.6

(26 to)30

138.8

40125

162.8

109.3

129.3

Mounting

hole

3-M4

87.3

96.2

13.5

55.2

195

205

5.5

1 35mm wide rail (hight 15mm) x 2

BM3RSB + SC-E02/G to E05/G

MMS

BM3RSB

Contactors

SC-E02, E03, E04, E05

Link module

BZ0LRE22AA

Base plate

BZ0BPRE22A

Mass (g)



820

14.3

17.6

(26 to)30

111.8

40125

162.8

82.3

102.3

Mounting

hole

3-M4

87.3

96.2

13.5

55.2

195

205

5.5

1 35mm wide rail (hight 15mm) x 2

BM3RSB + SC-E02 to E05

MMS

BM3RSB

Contactors

SC-M01, M02

SC-M01/G, SC-M02/G

Link module

BZ0LRC09AA

Mass(g)

540

600

47.5

62.3

3.7

54.3

8.8

14.3 7.15

157.8

156.7 5.1

13.53

47.5

Mounting hole

3-M4

135

5.5

Combination Starters

Dimensions

Combination Starters

MMS

BM3RHB

Contactors

SC-E02/G, E03/G, E04/G, E05/G

Link module

BZ0LRE22GA

Base plate

BZ0BPRE22A

Mass (g)

 1,085

14.3

17.6

(26 to)30

138.8

40125

162.8

109.3

129.3

Mounting

hole

3-M4

100.3

3.3

55.2

5.5

195

205

1 35mm wide rail (hight 15mm) x 2

115.8

BM3RHB + SC-E02/G to E05/G

MMS

BM3RHB

Contactors

SC-E02, E03, E04, E05

Link module

BZ0LRE22AA

Base plate

BZ0BPRE22A

Mass (g)

840

14.3

17.6

(26 to)30

111.8

40125

162.8

82.3

102.3

Mounting

hole

3-M4

100.3

3.3

55.2

5.5

195

205

1 35mm wide rail (hight 15mm) x 2

115.8

BM3RHB + SC-E02 to E05

14.3

13.5

5.5

32.4

39 (to 48)

235

247

816.5

185.1

Mounting

hole

3-M4

MMS

BM3RSB

Contactors

SC-E1/G

Link module

BZ0LRE32GA

Base plate

BZ0BPRE32A

Mass (g)

 1,360

74.5

91.8

100.7

116

56.5

40125

102.5

162.8

146.5 1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

BM3RSB + SC-E1/G

Dimensions, mm

• Combination

BM3RSB + SC-E1

Mounting

hole

3-M4 14.3

13.5

5.5

32.4

39 (to 48)

235

247

816.5

185.1

MMS

BM3RSB

Contactors

SC-E1

Link module

BZ0LRE32AA

Base plate

BZ0BPRE32A

Mass (g)

 1,135

74.5

91.8

100.7

90.5

56.5

40125

102.5

137.5

121

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

Dimensions

Combination Starters

BM3RHB + SC-E1/G

BM3V B + SC-E1, E2, E2S

MMS

BM3VSB

BM3VHB

Contactors

SC-E1, E2, E2S

Link module

BZ0LVE51AA

Base plate

BZ0BPVE51A

Mass (g)

 1,580

189.5

90.5

125

102.5

137.5

121

117.5

121.5

137

16.5

5.5

3.3

Mounting

hole

3-M4

16.5

8 39 (to 48)

235

247

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

MMS

BM3VSB

BM3VHB

Contactors

SC-E1/G, E2/G, E2S/G

Link module

BZ0LVE51GA

Base plate

BZ0BPVE51A

Mass (g)



1,810

189.5

116

125

102.5

162.8

146.5

117.5

121.5

137

16.5

5.5

3.3

Mounting

hole

3-M4

16.5

8 39 (to 48)

235

247

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

839 (to 48)

14.3

22.5

5.5

16.5

Mounting

hole

3-M4

3.3

32.4

185.1

235

247

MMS

BM3RHB

Contactors

SC-E1/G

Link module

BZ0LRE32GA

Base plate

BZ0BPRE32A

Mass (g)

 1,380

74.5

104.8

120.3

116

56.5

40125

102.5

162.8

146.5

35mm wide rail (hight 15mm) x 2

75mm wide rail (hight 25mm) x 1

BM3V B + SC-E1/G, E2/G, E2S/G

Dimensions, mm

• Combination

BM3RHB + SC-E1

MMS

BM3RHB

Contactors

SC-E1

Link module

BZ0LRE32AA

Base plate

BZ0BPRE32A

Mass (g)

 1,155

74.5

104.8

90.5

56.5

40125

102.5

137.5

121

120.3

839 (to 48)

14.3

22.5

5.5

16.5

Mounting

hole

3-M4

3.3

32.4

185.1

235

247

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

Dimensions

Combination Starters

Dimensions, mm

• Combination

BM3V B + SC-E3

MMS

BM3VSB

BM3VHB

Contactors

SC-E3/G

Link module

BZ0LVE65GA

Base plate

BZ0BPVE65A

Mass (g)

2,400

260

270

67 (SC-E3/G)

20.5

215.5

40125

102.5

116.5

171.2

155

117.5

121.5

137

Mounting

hole

3-M4 48 (to 56)

16.5

3.3

66 70

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

BM3V B + SC-E3/G

MMS

BM3VSB

BM3VHB

Contactors

SC-E3

Link module

BZ0LVE65AA

Base plate

BZ0BPVE65A

Mass (g)

 2,080

260

270

67 (SC-E3)

20.5

215.5

40125

102.5

97.5

152.2

136

117.5

121.5

137

Mounting

hole

3-M4 48 (to 56)

16.5

3.3

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

Dimensions

Combination Starters

Dimensions, mm

• Type F combination

BM3RSB + SC-E02 to E05

MMS

BM3RSB

Contactors

SC-E02, E03, E04, E05

Link module

BZ0LRE22AA

Line side terminal cover Short-circuit alarm contact block

BZ0TCRE BZ0TKUAB

Base plate

BZ0BPRE22A

Mass (g)

 895

35mm wide rail (hight 15mm) x 2

Dimensions

Mounting

hole

3-M4

204

208

49.3

58.3

5.5

13.5

93.3

3.340125

82.3

102.3

87.3

96.2

111.8

47.3

BM3RSB + SC-M01, M02, M01/G, M02/G

MMS

BM3RSB

Contactors

SC-M01, M02

SC-M01/G, M02/G

Link module

BZ0LRC09AA

Line side terminal cover Short-circuit alarm contact block

BZ0TCRE

BZ0TKUAB

Base plate

Mass (g)

 615

675

167.6

54.3

47.3

49.3

58.3

68.3

5.5

13.5

3.7

62.3

Mounting

hole

3-M4

Combination Starters

Dimensions, mm

• Type F combination

Dimensions

BM3RSB + SC-E1

MMS

BM3RSB

Contactors

SC-E1

Link module

BZ0LRE32AA

Line side terminal cover Short-circuit alarm contact block

BZ0TCRE BZ0TKUAB

Base plate

BZ0BPRE32A

Mass (g)

 1,230

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

47.3

97.8

82.5

74.5

100.7

91.8

40125

90.5

137.5

121

(Mountinng Rail Width75)

102.5

5.5

13.5

58.3

247

232 45

459

Mounting

hole

3-M4

BM3RSB + SC-E02/G to E05/G

MMS

BM3RSB

Contactors

SC-E02/G, E03/G, E04/G, E05/G

Link module

BZ0LRE22GA

Line side terminal cover Short-circuit alarm contact block

BZ0TCRE BZ0TKUAB

Base plate

BZ0BPRE22A

Mass (g)

1,160

35mm wide rail (hight 15mm) x 2

96.2

87.3

109.3

129.3

138.8

93.3

3.340125

47.3

Mounting

hole

3-M4

13.5

5.5

204

208

49.3

58.3

Combination Starters

Dimensions, mm

• Type F combination

BM3RHB + SC-M01, M02, M01/G, M02/G

Dimensions

Mounting

hole

3-M4

167.6

5.5

3.3

49.3

58.3

47.3

75.3

68.3

3.7

62.3

54.3

MMS

BM3RHB

Contactors

SC-M01, M02

SC-M01/G, M02/G

Link module

BZ0LRC09AA

Line side terminal cover Short-circuit alarm contact block

BZ0TCRE

BZ0TKUAB

Base plate

Mass (g)

635

695

BM3RSB + SC-E1/G

MMS

BM3RSB

Contactors

SC-E1/G

Link module

BZ0LRE32GA

Line side terminal cover Short-circuit alarm contact block

BZ0TCRE BZ0TKUAB

Base plate

BZ0BPRE32A

Mass (g)

 1,455

47.3

97.8

82.5

74.5

100.7

91.8

116

162.8

146.5

(Mountinng Rail Width75)

40125

102.5

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

5.5

13.5

58.3

247

232 45

459

Mounting

hole

3-M4

Combination Starters

Dimensions, mm

• Type F combination

Dimensions

BM3RHB + SC-E02/G to E05/G

MMS

BM3RHB

Contactors

SC-E02/G, E03/G, E04/G, E05/G

Link module

BZ0LRE22GA

Line side terminal cover Short-circuit alarm contact block

BZ0TCRE BZ0TKUAB

Base plate

BZ0BPRE22A

Mass (g)

1,160

35mm wide rail (hight 15mm) x 2

115.8

100.3

87.3

5.5

3.3

109.3

129.3

138.8

93.3

204

208

3.340125

47.3

49.3

58.3

Mounting

hole

3-M4

BM3RHB + SC-E02 to E05

MMS

BM3RHB

Contactors

SC-E02, E03, E04, E05

Link module

BZ0LRE22AA

Line side terminal cover Short-circuit alarm contact block

BZ0TCRE BZ0TKUAB

Base plate

BZ0BPRE22A

Mass (g)

915

Mounting

hole

3-M4

35mm wide rail (hight 15mm) x 2

3.3

5.5

115.8

87.3

93.3

204

208

3.340125

82.3

102.3

111.8

47.3

49.3

58.3

Combination Starters

Dimensions, mm

• Type F combination

BM3RHB + SC-E1/G

Dimensions

MMS

BM3RHB

Contactors

SC-E1/G

Link module

BZ0LRE32GA

Line side terminal cover Short-circuit alarm contact block

BZ0TCRE BZ0TKUAB

Base plate

BZ0BPRE32A

Mass (g)

1,455

Mounting

hole

3-M4

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

49.3

120.3

104.8

3.3

5.5

58.3

247

232 45

459

47.3

97.8

82.5

74.5

91.8

116

162.8

146.5

(Mountinng Rail Width75)

125

102.5

BM3RHB + SC-E1

MMS

BM3RHB

Contactors

SC-E1

Link module

BZ0LRE32AA

Line side terminal cover Short-circuit alarm contact block

BZ0TCRE BZ0TKUAB

Base plate

BZ0BPRE32A

Mass (g)

1,230

Mounting

hole

3-M4

49.3

3.3

5.5

120.3

104.8

58.3

247

232 45

459

47.3

97.8

82.5

74.5

91.8

40125

90.5

137.5

121

(Mountinng Rail Width75)

102.5

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

Combination Starters

Dimensions, mm

• Type F combination

Dimensions

MMS

BM3VSB,VHB

Contactors

SC-E1/G,E2/G,E2S/G

Link module

BZ0LVE51GA

Line side terminal cover Short-circuit alarm contact block

- BZ0TKUAB

Base plate

BZ0BPVE51A

Mass (g)

1,855

116

162.8

146.5

(Mountinng Rail Width75)

91.5

108.8

110.8

47.3

40125

102.5

117.5

121.5

137

120

232

3.3

5.5

247

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

Mounting

hole

3-M4

MMS

BM3VSB,VHB

Contactors

SC-E1,E2,E2S

Link module

BZ0LVE51AA

Line side terminal cover Short-circuit alarm contact block

- BZ0TKUAB

Base plate

BZ0BPVE51A

Mass (g)

1,625

Mounting

hole

3-M4

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

120

232

3.3

91.5

108.8

110.8

47.3

90.5

40125

102.5

137.5

121

(Mountinng Rail Width75)

117.5

121.5

137

5.5

247

BM3V B + SC-E1, E2, E2S

BM3V B + SC-E1/G, E2/G, E2S/G

Combination Starters

Dimensions, mm

• Type F combination

Dimensions

MMS

BM3VSB,VHB

Contactors

SC-E3/G

Link module

BZ0LVE65GA

Line side terminal cover Short-circuit alarm contact block

- BZ0TKUAB

Base plate

BZ0BPVE65A

Mass (g)

2,445

Mounting

hole

3-M4

256

270

120

3.3

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

(Mountinng Rail Width75)

116.5

171.2

155

47.3

102.5

125 40

108.8

110.8

117.5

121.5

137

891.5

MMS

BM3VSB,VHB

Contactors

SC-E3

Link module

BZ0LVE65AA

Line side terminal cover Short-circuit alarm contact block

- BZ0TKUAB

Base plate

BZ0BPVE65A

Mass (g)

2,125

Mounting

hole

3-M4

1 35mm wide rail (hight 15mm) x 2

2 75mm wide rail (hight 25mm) x 1

256

270

120

3.3

47.3

(Mountinng Rail Width75)

97.5

102.5

125 40

152.2

136

91.5

108.8

110.8

117.5

121.5

137

BM3V B + SC-E3

BM3V B + SC-E3/G

List Price for BM3 Series Manual Motor Starters

32A Frame types

Part number

Standard breaking capacity

Discount code List Price

BM3RSB-P16

BM3RSB-P25

BM3RSB-P40

BM3RSB-P63

BM3RSB-001

BM3RSB-1P6

BM3RSB-2P5

BM3RSB-004

BM3RSB-6P3

BM3RSB-010

BM3RSB-013

BM3RSB-016

BM3RSB-020

BM3RSB-025

BM3RSB-032

80.00

90.00

100.00

150.00

D14

Part number

High breaking capacity

Discount code List Price

BM3RHB-P16

BM3RHB-P25

BM3RHB-P40

BM3RHB-P63

BM3RHB-001

BM3RHB-1P6

BM3RHB-2P5

BM3RHB-004

BM3RHB-6P3

BM3RHB-010

BM3RHB-013

BM3RHB-016

BM3RHB-020

BM3RHB-025

BM3RHB-032

100.00

110.00

120.00

170.00

D14

63A Frame types

Part number

Standard breaking capacity

Discount code List Price

BM3VSB-010

BM3VSB-013

BM3VSB-016

BM3VSB-020

BM3VSB-025

BM3VSB-032

BM3VSB-040

BM3VSB-050

BM3VSB-063

170.00

190.00

210.00

230.00

D14

Part number

High breaking capacity

Discount code List Price

BM3VHB-010

BM3VHB-013

BM3VHB-016

BM3VHB-020

BM3VHB-025

BM3VHB-032

BM3VHB-040

BM3VHB-050

BM3VHB-063

260.00

290.00

310.00

330.00

D14

List Price for BM3 Series Manual Motor Starters accessories

Part number Description

BZ0WIA

BZ0WIB

BZ0WUAAL

BZ0WUABL

BZ0WUBBL

BZ0WUAAR

BZ0WUABR

BZ0WUBBR

Auxliary contact block (W)

Alarm contact block (K)

Front mounting Auxiliary contact - Internal type 1NO

Front mounting Auxiliary contact - Internal type 1NC

Left side mounting Auxiliary contact - Lateral type 2NO

Left side mounting Auxiliary contact - Lateral type 1NO+1NC

Left side mounting Auxiliary contact - Lateral type 2NC

Right side mounting Auxiliary contact - Lateral type 2NO

Right side mounting Auxiliary contact - Lateral type 1NO+1NC

Right side mounting Auxiliary contact - Lateral type 2NC

Discount code List Price

8.50

12.00

D14

BZ0KIA

BZ0KIB

Front (right side only) mounting Alarm contact - Internal type 1NO

Front (right side only) mounting Alarm contact - Internal type 1NC

9.00

D14

Auxliary and alarm contact blocks (WK)

BZ0WKUAA

BZ0WKUBA

BZ0WKUAB

BZ0WKUBB

Left side mounting Auxiliary and Alarm contact 1NO(Aux.)+1NO(Alarm)

Left side mounting Auxiliary and Alarm contact 1NC(Aux.)+1NO(Alarm)

Left side mounting Auxiliary and Alarm contact 1NO(Aux.)+1NC(Alarm)

Left side mounting Auxiliary and Alarm contact 1NC(Aux.)+1NC(Alarm)

18.00

D14

Short-circuit alarm contact block (KI)

BZ0TKUAB Left side mounting Short Circuit Alarm contact 1NO+1NC 20.00D14

Shunt trip devices (F)

BZ0FAZU

BZ0FBZU

BZ0FCZU

BZ0F1ZU

BZ0FDZU

BZ0FEZU

BZ0FFZU

BZ0FGZU

BZ0FHZU

BZ0F4ZU

BZ0FJZU

BZ0FKZUD

BZ0FLZUD

Right side mounting Shunt trip / Coil voltage 24VAC 50/60Hz

Right side mounting Shunt trip / Coil voltage 48VAC 60Hz

Right side mounting Shunt trip / Coil voltage 48VAC 50Hz / 60VAC 60Hz

Right side mounting Shunt trip / Coil voltage 100VAC 50Hz / 100-110VAC 60Hz

Right side mounting Shunt trip / Coil voltage 110-127VAC 50Hz / 120VAC 60Hz

Right side mounting Shunt trip / Coil voltage 200VAC 50Hz / 200-220VAC 60Hz

Right side mounting Shunt trip / Coil voltage 220-230VAC 50Hz / 240-260VAC 60Hz

Right side mounting Shunt trip / Coil voltage 240VAC 50Hz / 277VAC 60Hz

Right side mounting Shunt trip / Coil voltage 380-400VAC 50Hz / 400-440VAC 60Hz

Right side mounting Shunt trip / Coil voltage 415-440VAC 50Hz / 460-480VAC 60Hz

Right side mounting Shunt trip / Coil voltage 500VAC 50Hz / 600VAC 60Hz

Right side mounting Shunt trip / Coil voltage 24-60VDC

Right side mounting Shunt trip / Coil voltage 110-240VDC

34.00

D14

Undervoltage trip devices (R)

BZ0RAZ1U

BZ0RAZ2U

BZ0RBZ1U

BZ0RBZU

BZ0R1ZU

BZ0RDZU

BZ0REZU

BZ0RFZU

BZ0RGZU

BZ0RHZU

BZ0R4ZU

BZ0RJZU

Right side mounting Undervoltage trip / Coil voltage 24VAC 50Hz

Right side mounting Undervoltage trip / Coil voltage 24VAC 60Hz

Right side mounting Undervoltage trip / Coil voltage 48VAC 50Hz

Right side mounting Undervoltage trip / Coil voltage 48VAC 60Hz

Right side mounting Undervoltage trip / Coil voltage 100VAC 50Hz / 100-110VAC 60Hz

Right side mounting Undervoltage trip / Coil voltage 110-127VAC 50Hz / 120VAC 60Hz

Right side mounting Undervoltage trip / Coil voltage 200VAC 50Hz / 200-220VAC 60Hz

Right side mounting Undervoltage trip / Coil voltage 220-230VAC 50Hz / 240-260VAC 60Hz

Right side mounting Undervoltage trip / Coil voltage 240VAC 50Hz / 277VAC 60Hz

Right side mounting Undervoltage trip / Coil voltage 380-400VAC 50Hz / 400-440VAC 60Hz

Right side mounting Undervoltage trip / Coil voltage 415-440VAC 50Hz / 460-480VAC 60Hz

Right side mounting Undervoltage trip / Coil voltage 500VAC 50Hz / 600VAC 60Hz

34.00

D14

Line side terminal cover

BZ0TCRE Line side terminal cover for BM3R 18.00D14

External operating handles

BZ0VBBL

BZ0VYRL

BZ0VBBM

BZ0VYRM

External operating handle Standard type (Black) for BM3RH

External operating handle Emergency type (Red / Yellow) for BM3RH

External operating handle Standard type (Black) for BM3V

External operating handle Emergency type (Red / Yellow) for BM3V

40.00

45.00

40.00

45.00

D14

Others

BZ0SET

BZ0TCV

BZ0CFG

Push-in lug for BM3R (10pcs/pack)

IP 20 Terminal cover for BM3V (6pcs/pack)

Dummy cover (10pcs/pack)

8.00

12.00

40.00

D14

List Price for BM3 Series Manual Motor Starters accessories

Part number Description

BZ0BR02A

BZ0BR03A

BZ0BR04A

BZ0BR05A

BZ0BR12A

BZ0BR13A

BZ0BR14A

BZ0BR15A

BZ0BR22A

BZ0BR24A

BZ0BV02A

BZ0BV03A

BZ0BV04A

BZ0BV12A

BZ0BV13A

BZ0BV14A

BZ0BV22A

BZ0BV24A

BZ0BFRA

BZ0BFVA

BZ0BCRA

BZ0BCRB

BZ0BCVA

Busbar system

Enclosure

Busbar / 2-BM3R, modular space : 45mm

Busbar / 3-BM3R, modular space : 45mm

Busbar / 4-BM3R, modular space : 45mm

Busbar / 5-BM3R, modular space : 45mm

Busbar / 2-BM3R+1(9mm) external accessory, modular space : 54mm

Busbar / 3-BM3R+1(9mm) external accessory, modular space : 54mm

Busbar / 4-BM3R+1(9mm) external accessory, modular space : 54mm

Busbar / 5-BM3R+1(9mm) external accessory, modular space : 54mm

Busbar / 2-BM3R+1(18mm) or 2(9mm) external accessories, modular space : 63mm

Busbar / 4-BM3R+1(18mm) or 2(9mm) external accessories, modular space : 63mm

Busbar / 2-BM3V, modular space : 55mm

Busbar / 3-BM3V, modular space : 55mm

Busbar / 4-BM3V, modular space : 55mm

Busbar / 2-BM3V+1(9mm) external accessory, modular space : 64mm

Busbar / 3-BM3V+1(9mm) external accessory, modular space : 64mm

Busbar / 4-BM3V+1(9mm) external accessory, modular space : 64mm

Busbar / 2-BM3V+1(18mm) or 2(9mm) external accessories, modular space : 73mm

Busbar / 4-BM3V+1(18mm) or 2(9mm) external accessories, modular space : 73mm

3-phase feed-in terminal for BM3R

3-phase feed-in terminal for BM3V

Busbar cover for BZ0BR (pin connection)

Busbar cover for BZ0BR (fork connection)

Busbar cover for BZ0BV (pin connection)

Discount code List Price

19.00

23.00

27.00

28.00

20.00

24.00

28.00

30.00

44.00

54.00

42.00

53.00

65.00

46.00

59.00

70.00

50.00

78.00

23.00

48.00

6.00

8.00

D14

BZ0CSLA

BZ0CSLB

BZ0CFLA

BZ0CFLB

BZ0CKA

BZ0CPM

BZ0CPL

BZ0CPK

BZ0CCA

BZ0CUA

BZ0CNA

BZ0CLGA

BZ0CLGB

BZ0CLGC

BZ0CLGD

BZ0CLGE

BZ0CLRA

BZ0CLRB

BZ0CLRC

BZ0CLRD

BZ0CLRE

BZ0CLCA

BZ0CLCB

BZ0CLCC

BZ0CLCD

BZ0CLCE

Enclosure Surface mounting type IP41

Enclosure Surface mounting type IP55 with conversion kits

Enclosure Flush mounting type IP41

Enclosure Flush mounting type IP55 with conversion kits

Padlocking device

Emergency pushbutton / Momentary

Emergency pushbutton / Puch-lock turn reset

Emergency pushbutton / Key operated

Conversion kit from IP41 to IP55

Adapter set

Neutral connector

Indication Lamp / Green, 100-120VAC

Indication Lamp / Green, 200-240VAC

Indication Lamp / Green, 380-440VAC

Indication Lamp / Green, 480-500VAC

Indication Lamp / Green, 500-600VAC

Indication Lamp / Red, 100-120VAC

Indication Lamp / Red, 200-240VAC

Indication Lamp / Red, 380-440VAC

Indication Lamp / Red, 480-500VAC

Indication Lamp / Red, 500-600VAC

Indication Lamp / Transparent, 100-120VAC

Indication Lamp / Transparent, 200-240VAC

Indication Lamp / Transparent, 380-440VAC

Indication Lamp / Transparent, 480-500VAC

Indication Lamp / Transparent, 500-600VAC

40.00

57.00

40.00

51.00

30.00

39.00

40.00

82.00

12.00

11.00

4.00

33.00

D14

List Price for SC-E Series Contactors and

TK-E Series Overload Relays and accessories

Contactors Overload Relays

Part number

AC operating coil

List PriceDiscount code

SC-M01

SC-M02

SC-E02

SC-E03

SC-E04

SC-E05

SC-E1

SC-E2

SC-E2S

SC-E3

SC-E4

40.00

33.00

40.00

54.00

65.00

78.00

108.00

130.00

140.00

160.00

D14

Part number

DC operating coil

List PriceDiscount code

SC-M01/G

SC-M02/G

SC-E02/G

SC-E03/G

SC-E04/G

SC-E05/G

SC-E1/G

SC-E2/G

SC-E2S/G

SC-E3/G

SC-E4/G

57.00

38.00

60.00

80.00

94.00

99.00

130.00

158.00

175.00

200.00

D14

Part number

Overload Relays

List PriceDiscount code

TK-E02

TK-E2

TK-E3

42.00

80.00

90.00

D14

SC-E5

SC-E6

SC-E7

Super magnet operating coil

360.00

460.00

535.00

D14

TK-E5

TK-E6

TK-E6H

100.00

148.00

D14

List Price for SC-E Series Contactors and TK-E Series Overload Relays

Part number Description

Auxliary contact block

Discount code List Price

SZ-MA40

SZ-MA31

SZ-MA22

SZ-MA13

SZ-MA04

SZ-MA20

SZ-MA11

SZ-MA02

SZ-MAS10

SZ-MAS01

SZ-A40/T

SZ-A31/T

SZ-A22/T

SZ-A20/T

SZ-A11/T

SZ-A02/T

SZ-AS1/T

SZ-AS2/T

Front mounting Auxliary contact block (4NO) for SC-M01(/G), SC-M02(/G)

Front mounting Auxliary contact block (3NO+1NC) for SC-M01(/G), SC-M02(/G)

Front mounting Auxliary contact block (2NO+2NC) for SC-M01(/G), SC-M02(/G)

Front mounting Auxliary contact block (1NO+3NC) for SC-M01(/G), SC-M02(/G)

Front mounting Auxliary contact block (4NC) for SC-M01(/G), SC-M02(/G)

Front mounting Auxliary contact block (2NO) for SC-M01(/G), SC-M02(/G)

Front mounting Auxliary contact block (1NO+1NC) for SC-M01(/G), SC-M02(/G)

Front mounting Auxliary contact block (2NC) for SC-M01(/G), SC-M02(/G)

Side mounting Auxliary contact block (1NO) for SC-M01(/G), SC-M02(/G)

Side mounting Auxliary contact block (1NC) for SC-M01(/G), SC-M02(/G)

Front mounting Auxliary contact block (4NO) for SC-E02(/G) to SC-E4(/G)

Front mounting Auxliary contact block (3NO+1NC) for SC-E02(/G) to SC-E4(/G)

Front mounting Auxliary contact block (2NO+2NC) for SC-E02(/G) to SC-E4(/G)

Front mounting Auxliary contact block (2NO) for SC-E02(/G) to SC-E4(/G)

Front mounting Auxliary contact block (1NO+1NC) for SC-E02(/G) to SC-E4(/G)

Front mounting Auxliary contact block (2NC) for SC-E02(/G) to SC-E4(/G)

Side mounting Auxliary contact block (1NO+1NC) for SC-E02(/G) to SC-E4(/G)

Side mounting Auxliary contact block (1NO+1NC) for SC-E5 to SC-E7

30.00

25.00

15.00

20.00

14.00

22.00

D14

Main circuit surge suppression unit

SZ-ZM1E

SZ-ZM2E

SZ-ZM3E

SZ-ZM4E

Front mounting Main circuit surge suppression unit for SC-E02(/G) to SC-E05(/G)

Side mounting Main circuit surge suppression unit for SC-E02(/G) to SC-E05(/G)

Front mounting Main circuit surge suppression unit for SC-E1(/G) to SC-E4(/G)

Side mounting Main circuit surge suppression unit for SC-E1(/G) to SC-E4(/G)

38.00

40.00

D14

List Price for SC-E Series Contactors and TK-E Series Overload Relays accessories

List Price for SC-E Series Contactors and

TK-E Series Overload Relays accessories

Part number Description

SZ-MZ1

SZ-MZ2

SZ-MZ3

SZ-Z1

SZ-Z2

SZ-Z3

SZ-Z6

SZ-Z7

SZ-Z31

SZ-Z32

SZ-Z33

SZ-Z4

SZ-Z5

SZ-Z8

SZ-Z9

SZ-Z34

SZ-Z35

SZ-Z36

SZ-Z37

Coil surge suppression unit

Power connection kit for reversing

Coil surge suppression unit CR type 12-60VAC for SC-M01, SC-M02

Coil surge suppression unit CR type 72-250VAC for SC-M01, SC-M02

Coil surge suppression unit Diode type 6-250VDC for SC-M01/G, SC-M02/G

Coil surge suppression unit Varistor type 24-48VAC/DC for SC-E02(/G) to SC-E05(/G)

Coil surge suppression unit Varistor type 100-250VAC/DC for SC-E02(/G) to SC-E05(/G)

Coil surge suppression unit Varistor type 380-440VAC/DC for SC-E02 to SC-E05

Coil surge suppression unit Varistor type 24-48VAC/DC with LED for SC-E02(/G) to SC-E05(/G)

Coil surge suppression unit Varistor type 100-250VAC/DC with LED for SC-E02(/G) to SC-E05(/G)

Coil surge suppression unit Varistor type 24-48VAC/DC for SC-E1(/G) to SC-E4(/G)

Coil surge suppression unit Varistor type 100-250VAC/DC for SC-E1(/G) to SC-E4(/G)

Coil surge suppression unit Varistor type 380-440VAC/DC for SC-E1 to SC-E4

Coil surge suppression unit CR type 24-48VAC/DC for SC-E02(/G) to SC-E05(/G)

Coil surge suppression unit CR type 100-250VAC/DC for SC-E02(/G) to SC-E05(/G)

Coil surge suppression unit CR type 24-48VAC/DC with LED for SC-E02(/G) to SC-E05(/G)

Coil surge suppression unit CR type 100-250VAC/DC with LED for SC-E02(/G) to SC-E05(/G)

Coil surge suppression unit CR type 24-48VAC/DC for SC-E1 to SC-E4

Coil surge suppression unit CR type 100-250VAC/DC for SC-E1 to SC-E4

Coil surge suppression unit CR type 24-48VAC/DC for SC-E1/G to SC-E4/G

Coil surge suppression unit CR type 100-250VAC/DC for SC-E1/G to SC-E4/G

Discount code List Price

5.00

13.00

17.00

22.00

13.00

17.00

23.00

D14

SZ-MRWC

SZ-ERW1/A

SZ-ERW1/B

SZ-ERW1/D

SZ-ERW2/A

SZ-ERW2/B

SZ-ERW2/D

SZ-ERW3/A

SZ-ERW3/B

SZ-ERW3/D

Power connection kit for reversing line side and load side for SC-M01(/G), SC-M02(/G)

Power connection kit for reversing line side for SC-E02(/G) to SC-E05(/G)

Power connection kit for reversing load side for Reversing Contactor SC-E02(/G) to SC-E05(/G)

Power connection kit for reversing load side for Reversing Motor Starter SC-E02(/G) to SC-E05(/G)

Power connection kit for reversing line side for SC-E1(/G) to SC-E2S(/G)

Power connection kit for reversing load side for Reversing Contactor SC-E1(/G) to SC-E2S(/G)

Power connection kit for reversing load side for Reversing Motor Starter SC-E1(/G) to SC-E2S(/G)

Power connection kit for reversing line side for SC-E3(/G) to SC-E4(/G)

Power connection kit for reversing load side for Reversing Contactor SC-E3(/G) to SC-E4(/G)

Power connection kit for reversing load side for Reversing Motor Starter SC-E3(/G) to SC-E4(/G)

18.00

10.00

20.00

40.00

D14

Mechanical interlock unit

SZ-MRM

SZ-RM

Mechanical interlock unit for SC-M01(/G), SC-M02(/G)

Mechanical interlock unit for SC-E02(/G) to SC-E4(/G)

4.00

20.00

D14

Base unit for separate mounting

SZ-HCE

SZ-HDE

SZ-HEE

Separate mounting base unit for TK-E02

Separate mounting base unit for TK-E2

Separate mounting base unit for TK-E3

10.00

20.00

25.00

D14

Trip indicator

SZ-L100

SZ-L200

SZ-L100N2

SZ-L200N2

Trip indicator 100-110VAC for TK-E02

Trip indicator 200-220VAC for TK-E02

Trip indicator 100-110VAC for TK-E2 to TK-E6

15.00

Reset release button

SZ-R1

SZ-R2

SZ-R3

SZ-R4

SZ-R5

SZ-R6

Reset release button 300mm for TK-E02

Reset release button 500mm for TK-E02

Reset release button 700mm for TK-E02

Reset release button 300mm for TK-E2 to TK-E6

Reset release button 500mm for TK-E2 to TK-E6

Reset release button 700mm for TK-E2 to TK-E6

96.00

112.00

127.00

100.00

120.00

135.00

Dial cover

SZ-DA Dial cover for TK-E02 to TK-E6 2.00D1

List Price for SC-E Series Contactors and TK-E Series Overload Relays accessories

4NC0H-#MC

SZ-GM/N1-#

SZ-GM/N2S-#

SZ-GS/N5-#

SZ-GS/N6-#

Replacement coil

Replacement coil for SC-E02 to SC-E05 (# : operating coil voltage code)

Replacement coil for SC-E1 to SC-E2S (# : operating coil voltage code)

Replacement coil for SC-E3 to SC-E4 (# : operating coil voltage code)

Replacement coil for SC-E5 (# : operating coil voltage code)

Replacement coil for SC-E6 to SC-E7 (# : operating coil voltage code)

30.00

31.00

250.00

276.00

List Price for Combination Starters accessories

Part number Description

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE32AA

BZ0LRE32GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE65AA

BZ0LVE65GA

Base plates

Link module for BM3R and SC-M01(/G), SC-M02(/G)

Link module for BM3R and SC-E02 to SC-E05

Link module for BM3R and SC-E02/G to SC-E05/G

Link module for BM3R and SC-E1

Link module for BM3R and SC-E1/G

Link module for BM3V and SC-E1 to E2S

Link module for BM3V and SC-E1/G to E2S/G

Link module for BM3V and SC-E3

Link module for BM3V and SC-E3/G

Discount code List Price

15.00

20.00

18.00

20.00

18.00

22.00

24.00

28.00

D14

BZ0BPRE22A

BZ0BPRE32A

BZ0BPVE51A

BZ0BPVE65A

Base plate for BM3R and SC-E02(/G) to SC-E05(/G)

Base plate for BM3R and SC-E1(/G)

Base plate for BM3V and SC-E1(/G) to SC-E2S(/G)

Base plate for BM3V and SC-E3(/G)

22.00

24.00

26.00

30.00

D14

Appendix 1 : Construction of combination motor controllers

The UL508 standard defines 6 categories depending on the construction type for the combination motor controllers. The type

and component function is shown below.

Fuji MMS is indicated on the label with "Manual Self-Protected Combination Motor Controller" (TYPE E) and "Combination

Motor Controller" (TYPE F).

Type Component

standard

Component

Manual disconnect

Fuse

Magnetic

Overload relay

Manual disconnect

Motor short-circuit Protector

Magnetic

Overload relay

Inverse time Circuit Breaker

Magnetic

Overload relay

Instantaneous Circuit Breaker

Magnetic

Overload relay

Self-Protected control device

Manual Self-protected combination motor controller

Magnetic

UL98,UL1087

UL248

UL508

UL98,UL1087

UL508

UL489

UL508

UL489

UL508

Component funciton per NEC

Disconnect

Branch circuit

protection

Motor control

Motor overload

Appendix

Appendix 2 : Short circuit coordination comparison

UL508 (Part IV, Combination Motor Controllers) and IEC60947-4-1 are the two major standards concerning the combination of

the MMS and the Contactor. In IEC60947-4-1, it only regulates the short-circuit protective coordination between the Contactor

and the Circuit Breaker. However, in UL508, it takes the combination of the MMS and Contactor as a united component and

requires additional performances besides the short-circuit test.

UL standard is available for another standard related short circuit coordination, that is UL subject 508E.

(IEC type "2" Coordination Short Circuit Tests of Electromagnetic Motor Controllers in accordance with IEC Publication 947-4-1)

UL subject 508E is to certify that the coordination between the MMS and Contactor comply with IEC60947-4-1 type 2

requirements.

Fuji combination Starters are also cUL listed UL subject 508E, which means that it comforms to both UL and IEC regulation for

short-circuit coordination.

Coordination details between MMS and Contactor as UL508 Type F, please see page 56, 57, as UL subject 508E, please see

page 79, 80.

Test

Short-Circuit 

Coordination

Current withstand

Dielectric voltage withstand

Calibration

Temperature

Effective region

UL508

Type F

North America

IEC60947-4-1

Type 1 Type 2

UL subject 508E

- The contactor may be damaged

- It may not be suitable for further

service without repair or

replacement.

Europe

- The contactor may be damaged

- It may not be suitable for further

service without repair or

replacement.

Europe

- No damage except light welding

of the contacts of the contactor.

- It shall be suitable for further use.

North America

- No damage except light welding

of the contacts of the contactor.

- It shall be suitable for further use.

Appendix

• BM3RSB, BM3RHB (UL subject E coordination)

220-240V AC 440-480V AC

1/2

3/4

1-1/2

7-1/2

2.2

3.2

9.6

15.2

3/4

7-1/2

1.6

2.1

3.4

4.8

7.6

BM3RSB-P16

BM3RSB-P25

BM3RSB-P40

BM3RSB-P63

BM3RSB-001

BM3RSB-1P6

BM3RSB-2P5

BM3RSB-004

BM3RSB-6P3

BM3RHB-P16

BM3RHB-P25

BM3RHB-P40

BM3RHB-P63

BM3RHB-001

BM3RHB-1P6

BM3RHB-2P5

BM3RHB-004

BM3RHB-6P3

BM3RHB-010

BM3RHB-013

BM3RHB-016

BM3RHB-020

BM3RHB-025

BM3RHB-032

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRC09AA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE22AA

BZ0LRE22GA

BZ0LRE32AA

BZ0LRE32GA

BZ0LRE32AA

BZ0LRE32GA

BZ0BPRE22A

BZ0BPRE32A

BZ0BPRE22A

BZ0BPRE32A

BZ0BPRE22A

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-M01, M01/G

SC-E02

SC-E02/G

SC-E02

SC-E02/G

SC-E04

SC-E04/G

SC-E04

SC-E04/G

SC-E05

SC-E05/G

SC-E05

SC-E05/G

SC-E05

SC-E05/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

MMS part number Contactor 

part number

Link module

Short-circuit ratings at

480V AC (kA)

Base plate

HP rating

(HP)

Rated

current (A)

HP rating

(HP)

Rated

current (A)

Part number

0.1-0.16

0.16-0.25

0.25-0.4

0.4-0.63

0.63-1

1-1.6

1.6-2.5

2.5-4

4-6.3

6.3-10

10-13

11-16

14-20

18-25

24-32

Current

range (A)

for BM3RSB for BM3RHB

Appendix

• BM3VSB, BM3VHB (UL subject E coordination)

220-240V AC 440-480V AC

7-1/2

9.6

15.2

7-1/2

7.6

BM3VSB-010

BM3VSB-013

BM3VSB-016

BM3VSB-020

BM3VSB-025

BM3VSB-032

BM3VSB-040

BM3VHB-010

BM3VHB-013

BM3VHB-016

BM3VHB-020

BM3VHB-025

BM3VHB-032

BM3VHB-040

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0LVE51AA

BZ0LVE51GA

BZ0BPVE51A

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E1

SC-E1/G

SC-E2

SC-E2/G

MMS part number Contactor 

part number

Link module

Short-circuit ratings at

480V AC (kA)

Base plate

HP rating

(HP)

Rated

current (A)

HP rating

(HP)

Rated

current (A)

Part number

6.3-10

10-13

11-16

14-20

18-25

24-32

28-40

Current

range (A)

for BM3VSB for BM3VHB

 TERMS AND CONDITIONS OF SALE



Prices

All prices are subject to change without notice. In the

event of a price change, the effective date of the

change will be the date on the new price or discount

schedule sheet.

All quotations made or orders accepted after the

effective date will be based on the new prices.

Quotations

Written quotations are valid for 30 days from its date

unless otherwise stated in the quotation. Verbal

quotations expire the same day they are made.

Taxes

The price does not include any taxes. Buyer shall be

responsible for the payment of all applicable taxes.

Terms of payment

Terms of payment will be listed on the quotations.

Minimum orders

Orders amounting to less than $150.00 net per order

will be charged a $50.00 handling fee.

Delivery

Delivery of products shall be FOB point of origin in the

U.S. Seller shall determine the point of origin of

shipment. All shipping and other charges shall be paid

by Buyer.

Packing

Prices include standard domestic packing. Additional

special packing costs required for export or by Buyer's

request will be charged to Buyer.

Weight and Dimensions

The weight and dimensions of products described in

this catalog are the best information available at the

time of going to press. As Seller follows a policy of

continuous product improvement, design changes may

make this information obsolete. Information in this

catalog is subject to change without notice.

Inspection and acceptance of products

Buyer is responsible for evaluating received products

for final acceptance. All claims for shortage must be

made within thirty (30) days of receipt of products.

Return / Cancellation

No product shall be returned or canceled unless

return/order cancel authorization has been secured

from Seller. All returns/cancellations must comply with

Seller's then current Return / Cancellation policy.

Risk of Loss

Risk of loss or damage to the product shall pass to

Buyer at the FOB point.

Catalog Disclaimer

The information contained in this catalog does not

constitute an express or implied warranty of quality,

any warranty of merchantability of fitness for a

particular purpose is hereby disclaimed.

Since the Buyer's product information, specific use

application, and conditions of use are all outside of

Seller's control, it shall be the responsibility of the

Buyer to determine the suitability of any of the

products mentioned for the Buyer's application.

The products identified in this catalog shall be sold pursuant

to the terms and conditions identified in the Conditions of

Sale issued by Fuji Electric with each order confirmation.

Except to the extent otherwise provided for in the

Conditions of Sale issued by Fuji Electric, Fuji Electric

warrants that the Fuji Electric products identified in this

catalog shall be free from significant defects in materials

and workmanship provided the products have not been: (1)

repaired or altered by others than Fuji Electric; (2) subjected

to negligence, accident, misuse, or damage by

circumstances beyond Fuji Electric's control; (3) improperly

operated, maintained or stored; or (4) used in other than

normal use or service. This warranty shall apply only to

defects appearing within one (1) year from the date of

shipment by Fuji Electric, and in such case, only if such

defects are reported to Fuji Electric within thirty (30) days of

discovery by purchaser.

Such notice should be submitted in writing to Fuji Electric at

Park 80 West, Plaza II, Saddle Brook, NJ 07663. The sole and

exclusive remedy with respect to the above warranty

whether such claim is based on warranty, contract,

negligence, strict liability or any other theory, is limited to

the repair or replacement of such product or, at Fuji

Electric's option, reimbursement by Fuji Electric of the

purchase price paid to Fuji Electric for the particular product.

FUJI ELECTRIC DOES NOT MAKE ANY OTHER

REPRESENTATIONS OR WARRANTIES, WHETHER ORAL OR

IN WRITING, EXPRESSED OR IMPLIED, INCLUDING BUT

NOT LIMITED TO ANY WARRANTY REGARDING

MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE.

Except as provided in the Conditions of Sale, no agent or

representative of Fuji Electric is authorized

to modify the

terms of this Warranty in writing or orally.

In no event shall Fuji Electric be liable for special, indirect or

consequential damages, including but not limited to, loss of

use of the product, other equipment, plant, power system,

loss of profits or revenues, cost of capital, or claims against

the purchaser or user by its customers resulting from the

use of information, recommendations and descriptions

contained herein. Purchaser agrees to pass on to its

customers and users, in writing at the time inquiries and

orders are received by buyer, Fuji Electric's warranty as set

forth above.

ONE YEAR LIMITED WARRANTY

INFORMATION IN THIS CATALOG IS SUBJECT TO CHANGE WITHOUT NOTICE.

Printed in USA 2004/5M

FUJI ELECTRIC FA COMPONENTS

& SYSTEMS

Gate City Osaki, East Tower

11-2 Osaki 1-chome

Shinagawa-ku, Tokyo 141-0032, Japan

Phone: Tokyo 3-5435-7136

Fax: Tokyo 3-5435-7457

Website: www.fujielectric.co.jp

FUJI ELECTRIC CORP.

OF AMERICA

Park 80 West Plaza II

Saddle Brook, NJ 07663

Phone: 201-712-0555

Fax: 201-368-8258

Website: www.fujielectric.com

Your local authorized stocking distributor is:

MANUAL MOTOR STARTERS

MAGNETIC CONTACTORS

USEH530a