ERL (Military RLR) Vishay Dale Metal Film Resistors, Military/Established Reliability, MIL-PRF-39017 Qualified, Type RLR FEATURES * Meets requirements of MIL-PRF-39017 * Failure rate: Verified failure rate (contact factory for current level) * Epoxy coated construction provides superior moisture protection * Traceability of materials and processing * Monthly lot acceptance testing * Very low noise (- 40 dB) * Extensive stocking program at distributors and factory in 1 % and 2 % tolerances * Vishay Dale has complete capability to develope specific reliability programs designed to customer requirements STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL MIL MIL-PRF-39017 SPEC. STYLE SHEET POWER RATING 70 C W ERL05, ERL05..19 (3) RLR05 05 0.125 ERL07, ERL07..23 (3) RLR07 01 0.25 RESISTANCE RANGE (1) 4.7 to 301K 302K to 1M 1 to 9.76 10 to 3.01M 3.02M to 10M TOLERANCE % TEMPERATURE COEFFICIENT ppm/C MAXIMUM WORKING VOLTAGE (4) V 1, 2 100 200 1, 2 100 250 LIFE FAILURE RATE (2) M, P, R, S M, P, R M M, P, R, S M, P, R ERL20, RLR20 02 0.50 4.3 to 3.01M 1, 2 100 350 M, P, R ERL20..11 (3) ERL32, RLR32 03 1.0 1 to 2.7M 1, 2 100 500 M, P, R ERL32..1 (3) Notes (1) Extended Resistance Range: DSCC has created a series of drawings intended to support extended resistance ranges left otherwise void by the discontinuation of MIL-R-39008 RCR carbon composition resistors. Vishay Dale is listed as a resource on these drawings as follows: VISHAY DALE MODEL POWER RATING P70 C W RESISTANCE RANGE TOLERANCE % TEMPERATURE COEFFICIENT ppm/C 98020 99011 98021 98022 ERL05..36, ERL05..37 (3) ERL07..100, ERL07..101 (3) ERL20..36, ERL20..37 (3) ERL32..36, ERL32..37 (3) 0.125 0.25 0.50 1.0 2, 5, 10 2, 5, 10 2, 5, 10 2, 5, 10 97004 ERL62..1, ERL62..2 (3) 2.0 1.1M to 22M 11M to 22M 3.3M to 22M 3M to 22M 10 to 2.7M 3M to 22M 350 350 350 350 100 350 DSCC DRAWING NUMBER 1, 2, 5, 10 MAXIMUM WORKING VOLTAGE V (4) 200 250 350 350 500 * Low inductance: DSCC has created a drawing intended to support a resistor which exhibits low inductance over a frequency range of 1 MHz to 30 MHz. Vishay Dale is listed as a resource on these drawings as follows: MAXIMUM RATING RESISTANCE TEMPERATURE VISHAY DALE POWER TOLERANCE COEFFICIENT P INDUCTANCE RANGE 70 C MODEL % ppm/C W nH 1 to 10 10 96002 ERL07..62 0.25 1, 2 100 11 to 49.9 8 These drawings can be viewed at: www.dscc.dla.mil/Programs/MilSpec/ListDwgs.asp?DocType=DSCCdwg DSCC DRAWING NUMBER (2) (3) (4) MAXIMUM WORKING VOLTAGE V (4) 250 Consult factory for current QPL failure rates Hot solder dipped leads Continuous working voltage shall be P x R or maximum working voltage, whichever is less. TECHNICAL SPECIFICATIONS PARAMETER Voltage Coefficient, max. Dielectric Strength Insulations Resistance Operating Temperature Range Terminal Strength Solderability Weight www.vishay.com 54 UNIT ppm/V VAC C lb g CONDITION 5/V when measured between 10 % and full rated voltage RLR05 = 300; RLR07 and RLR20 = 500; RLR32 = 1000 109 min. dry; 1011 min. after moisture test - 65 to + 150 2 lb pull test on RLR05; 5 lb pull test on all other sizes Continuous satisfactory coverage when tested in accordance with MIL-STD-202, Method 208 RLR05 = 0.11; RLR07 = 0.35; RLR20 = 0.75; RLR32 = 1.50 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31023 Revision: 11-Mar-10 ERL (Military RLR) Metal Film Resistors, Military/Established Reliability, MIL-PRF-39017 Qualified, Type RLR Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RLR07C3001FRR36 (preferred part numbering format) R L R 0 MIL STYLE LEAD MATERIAL RLR05 RLR07 RLR20 RLR32 C = Solderable/ weldable 7 C 3 0 0 1 RESISTANCE TOLERANCE VALUE CODE F=1% 3 digit significant figure, followed G=2% by a multiplier Use "R" for values < 100 1R00 = 1.0 3302 = 33 k 1005 = 10 M F R R FAILURE RATE M = 1.0 %/1000 h P = 0.1 %/1000 h R = 0.01 %/1000 h S = 0.001 %/1000 h 3 6 PACKAGING SPECIAL B14 = Tin/lead, bulk BSL = Tin/lead, bulk, single lot date code R36 = Tin/lead, T/R (full, except 32's) R64 = Tin/lead, T/R (full; 32's only) RE6 = Tin/lead, T/R (1000 pieces) RSL = Tin/lead, T/R, single lot date code Blank = Standard (Dash number) (Up to 3 digits) From 1 to 999 as applicable 1 = Hot solder dip (32's) 11 = Hot solder dip (20's) 19 = Hot solder dip (05's) 23 = Hot solder dip (07's) Historical Part Number example: RLR07C3001FR (will continue to be accepted) RLR07 C 3001 F R R36 MIL STYLE LEAD MATERIAL RESISTANCE VALUE TOLERANCE CODE FAILURE RATE PACKAGING DIMENSIONS in inches (millimeters) E (1) A C (Max.) D B Note (1) 1.08 0.125 (27.43 3.18) if tape and reel VISHAY DALE MODEL ERL05 ERL07 ERL20 ERL32 ERL62 A B 0.150 0.020 (3.81 0.51) 0.250 0.031 - 0.046 (6.35 0.79 - 1.17) 0.375 0.041 (9.53 1.04) 0.562 0.031 (14.27 0.79) 0.562 + 0.031 - 0.042 (14.27 + 0.79 - 1.07) 0.066 0.008 (1.68 0.21) 0.090 0.008 (2.29 0.21) 0.138 0.023 (3.51 0.58) 0.190 0.015 (4.83 0.38) 0.230 0.015 (5.84 0.38) MATERIAL SPECIFICATIONS Element Vacuum-deposited nickel-chrome alloy Core Fire-cleaned high purity ceramic Encapsulation Specially formulated epoxy compound Termination Standard lead material is solder-coated copper Solderable and weldable per MIL-STD-1276, Type C. POWER RATING Power ratings are based on the following two conditions: 1. 2.0 % maximum R in 2000 h load life 2. + 150 C maximum operating temperature C (Max.) 0.187 (4.75) 0.300 (7.62) 0.450 (11.43) 0.625 (15.87) 0.650 (16.51) D E 0.016 0.002 (0.41 0.05) 0.025 0.002 (0.64 0.05) 0.032 0.002 (0.81 0.05) 0.032 + 0.002 - 0.001 (0.81 + 0.05 - 0.03) 0.032 + 0.002 - 0.001 (0.81 + 0.05 - 0.03) 1.25 0.266 (31.75 6.76) 1.50 0.125 (38.10 3.18) 1.50 0.125 (38.10 3.18) 1.50 0.125 (38.10 3.18) 1.50 0.125 (38.10 3.18) APPLICABLE MIL-SPECIFICATIONS MIL-PRF-39017: The ERL series meets the electrical, environmental and dimensional requirements of MIL-PRF-39017. MIL-PRF-22684: MIL-PRF-39017 supercedes MIL-PRF-22684 on new designs. The ERC series meet or exceed MIL-PRF-22684 requirements. Documentation: Qualification and failure rate verfication test data is maintained by Vishay Dale and is available upon request. Lot traceability and identification data is maintained by Vishay Dale for five years. CAGE CODE: 91637 Document Number: 31023 Revision: 11-Mar-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 55 ERL (Military RLR) HEAT RISE (C ABOVE AMBIENT) 120 ERL05 ERL07 100 ERL20 80 ERL32 60 RATED POWER IN % Metal Film Resistors, Military/Established Reliability, MIL-PRF-39017 Qualified, Type RLR Vishay Dale 120 100 80 60 40 40 20 20 0 0 0.125 0.25 0.375 0.5 0.625 THERMAL RESISTANCE 0.75 0.875 1 1.125 APPLIED POWER IN W 0 - 65 - 50 - 25 0 25 DERATING 50 75 100 125 150 175 200 70 AMBIENT TEMPERATURE IN C MARKING - Per MIL-PRF-39017 www.vishay.com 56 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31023 Revision: 11-Mar-10 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1