CHEMTRONICS(R) TDS # 1020K Technical Data Sheet Ultrajet(R) Duster System PRODUCT DESCRIPTION Ultrajet(R) Duster System is a high pressure duster that cleans electronics without scratching delicate surfaces. This duster/cleaner is nonflammable, residue-free and won't scratch delicate surfaces. Filtered to 0.2 microns Nonflammable Leaves no residue High pressure for contamination control Nonabrasive Excellent material compatibility Penetrates hard to reach areas Contains no ozone depleting compounds TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Boiling Point Vapor Density (air=1) @ 77F 0.10% by weight Solubility in Water @ 77F F/1 atm 1.21 Specific Gravity (water = 1 @77F) Evaporation Rate (butyl acetate=1) Appearance TYPICAL APPLICATIONS Ultrajet(R) Duster System is engineered for all aspects of electronic equipment maintenance and is particularly suited for applications involving: Audio/Video Equipment Computers and Other Electronic Equipment Fax Machines Lab Instruments Photo Equipment Printed Circuit Boards Printers Surface Mount Devices -15.7F 3.18 Odor Surface Tension (dynes/cm @77F) Flash Point (TCC) Shelflife >1 Clear, Colorless Liquified Gas Slight Ethereal 7.8 None 5 years RoHS/WEEE Status COMPATIBILITY Ultrajet(R) Duster System is generally compatible with most materials used in printed circuit board fabrication, including sensitive plastics and compounds. As with any duster/cleaner, compatibility must be determined on a non-critical area prior to use. Material Buna-N Graphite HDPE LDPE LexanTM Neoprene Cross-Linked PE Polyacrylate Polystyrene PVC Silicone Rubber TeflonTM VitonTM TECHNICAL & APPLICATION ASSISTANCE Chemtronics(R) provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401. Compatibility Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent ENVIRONMENTAL IMPACT DATA ENVIRONMENTAL IMPACT DATA CFC HCFC CL Solv. VOC HFC ODP 0.0% 100.0% 0.0 CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown are the content by weight. Ozone depletion potential (ODP) is determined in accordance with the Montreal Protocol and U.S. Clean Air Act of 1990. The ODP of this product is 0.0. It is the sum of the ODP of the substances that may contribute to the depletion of stratospheric ozone, based upon the weight of each substance in the product's formulation. PERFORMANCE Pressure PSIG / Temperature F 200 P S I G 0.0% 0.0% 0.0% 150 100 - NOTE: 50 0 20 40 60 80 Temperature F 100 120 140 USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. No special surface preparation is required prior to using Ultrajet(R) Duster System. Direct high pressure spray onto the area to be cleaned to remove dust, dirt and other contaminant. For optimum performance and pin point control, use with the attached extension tube. AVAILABILITY ES1020K ES1020R ES710V 10 oz. Aerosol Kit 10 oz. Refill Chrome Trigger Valve This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS(R) does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. MANUFACTURED BY: ITW CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 1-770-424-4888 DISTRIBUTED BY: REV. E (06/06)