PRODUCT DESCRIPTION
Ultrajet® Duster System is a high pressure duster that
cleans electronics without scratching delicate
surfaces. This duster/cleaner is nonflammable,
residue-free and won’t scratch delicate surfaces.
Filtered to 0.2 microns
Nonflammable
Leaves no residue
High pressure for contamination control
Nonabrasive
Excellent material compatibility
Penetrates hard to reach areas
Contains no ozone depleting compounds
TYPICAL APPLICATIONS
Ultrajet® Duster System is engineered for all aspects
of electronic equipment maintenance and is
particularly suited for applications involving:
Audio/Video Equipment
Computers and Other Electronic Equipment
Fax Machines
Lab Instruments
Photo Equipment
Printed Circuit Boards
Printers
Surface Mount Devices
TYPICAL PRODUCT DATA AND PHYSICAL
PROPERTIES
Boiling Point -15.7°F
Vapor Density (air=1)
@ 77°F
3.18
Solubility in Water
@ 77°F F/1 atm 0.10% by weight
Specific Gravity
(water = 1 @77°F) 1.21
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless
Liquified Gas
Odor Slight Ethereal
Surface Tension
(dynes/cm @77°F) 7.8
Flash Point (TCC) None
Shelflife 5 years
RoHS/WEEE
Status
COMPATIBILITY
Ultrajet® Duster System is generally compatible with
most materials used in printed circuit board
fabrication, including sensitive plastics and
compounds. As with any duster/cleaner,
compatibility must be determined on a non-critical
area prior to use.
TDS # 1020K
CHEMTRONICS®
Technical Data Sheet
Ultrajet® Duster System
Material Compatibility
Buna-N Excellent
Graphite Excellent
HDPE Excellent
LDPE Excellent
Lexan™ Excellent
Neoprene Excellent
Cross-Linked PE Excellent
Polyacrylate Excellent
Polystyrene Excellent
PVC Excellent
Silicone Rubber Excellent
Teflon™ Excellent
Viton™ Excellent
PERFORMANCE
Pressure PSIG / Temperature F
200
-
P 150
S -
I 100
G -
50
-
0
20 40 60 80 100 120 140
Temperature F
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
No special surface preparation is required prior to
using Ultrajet® Duster System. Direct high pressure
spray onto the area to be cleaned to remove dust, dirt
and other contaminant. For optimum performance
and pin point control, use with the attached extension
tube.
AVAILABILITY
ES1020K 10 oz. Aerosol Kit
ES1020R 10 oz. Refill
ES710V Chrome Trigger Valve
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics® provides a technical hotline to answer
your technical and application related questions. The
toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 0.0%
HCFC 0.0% HFC 100.0%
CL Solv. 0.0% ODP 0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of this
product is 0.0. It is the sum of the ODP of the substances
that may contribute to the depletion of stratospheric ozone,
based upon the weight of each substance in the product’s
formulation.
NOTE:
This information is believed to be accurate. It is intended
for professional end users having the skills to evaluate and
use the data properly. CHEMTRONICS® does not
guarantee the accuracy of the data and assumes no liability
in connection with damages incurred while using it.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. E (06/06)
DISTRIBUTED BY:
