Han-Kit(R) Economic and Reliable Connections 1 Kit per Packaging Easy Choice for You! Specifications VDE 0110 Standard concerning . clearance and creepage . distances VDE 0627 Connectors Standards UL, CSA, SEV for inserts and housings General Remarks Termination * Screw terminal It is the user's responsibility to check whether the components belonging to these kits comply with different regulations from those stated in special fields of application which we are unable to foresee. We reserve the right to modify designs in order to improve quality, keep pace with technological advancement or meet particular requirements in production. This information leaflet must not be used in any from or manner without our prior approval in writing (Copyright Law, Fair Trading Law, Civil Code). We are bound by the German version only. Inserts * Leading protective ground * Polarized for correct mating * Interchangeability of male & female inserts in hoods and housings Housings * Electrical connection with protective ground * High mechanical strength and vibration resistance ensured by locking levers. Certified according to DIN EN ISO 9001 in design/ development, production, installation and service. Accessories * Cable glands are not included in the standard kit and must be ordered separately. Note Connectors should not be connected and disconnected under electrical load. Connectors are electrical components which should be installed by properly trained personnel only! Connectors of the same or different series that are mounted in a side-by-side configuration may be protected against incorrect mating through the use of coding pins and bushings. Han-Kit(R) 16 B Hood Cable Gland Male Connector Locking lever Bulkhead mounted Housing Sealing Flange Gasket Fixing Screws Contact Screws Female Connector Page 2 / 12 PE panel with PE contact Han-Kit(R) Screw terminal a Inserts Max. Wire Gauge Han 3A.... + 4A.... Stripping Length Sheath Length (mm) AWG a (mm) x (mm) 2.5 14 4.5 40 mm Han 10 A 2.5 14 7 85 mm Han 16 A 2.5 14 7 100 mm Han 6 B 2.5 14 7 70 mm Han 10 B 2.5 14 7 90 mm Han 16 B 2.5 14 7 110 mm Han 24 B 2.5 14 7 130 mm Working Current The current carrying capacity is limited by maximum temperature of materials for inserts and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature according to DIN IEC 512-3. Working Current Derating Diagrams Ambient Temperature Ambient Temperature 1 = Han 6 B 2 = Han 10 B 3 = Han 16 B 4 = Han 24 B 1 = Han 3 A / 4 A 2 = Han 10 A 3 = Han 16 A Wire gauge: 2.5 mm = AWG 14 Recommended Tightning Torques and Screw Driver Blades Recomm. Tightening Tightening Screw torque torque drive size [Nm] [In-lbf] (mm) Size of screw Type of connector M3 Screw Contact Han 3A.../4A... 0.5 4.4 0.5 x 3.5 M3 Screw Contact Han 10+16A + 6-24B 0.5 4.4 0.5 x 3.5 M3.5 PE-Contact Han 10+16A 1.2 10.6 0.5 x 3.5 M4 PE-Contact Han 6-24B 1.2 10.6 0.5 x 3.5 Page 3 / 12 Han-Kit(R) Han-Kit(R)-10A Part Number: 10 20 010 0000 Hood: Material: Degree of protection: Cable entry protection: Han 10 A Die cast light alloy IP 65 Pg 16 Male insert: Screw termination: Working voltage: Working current: Han 10 A/10 poles + up to 2.5 mm 600V UL/CSA 16 A Female insert: Screw termination: Working voltage: Working current: Han 10 A/10 poles + up to 2.5 mm 600V UL/CSA 16 A Housing bulkhead mounting: Material: Han 10 A Die cast light alloy Flange gasket Panel cut out 57 x 24 mm O 3,4 Degree of protection according to IEC 529 / EN 60529 in locked position: IP 65 Han-Kit(R)-16A Part Number: 10 20 016 0000 Hood: Material: Degree of protection: Cable entry protection: Han 16 A Die cast light alloy IP 65 Pg 16 Male insert: Screw termination: Working voltage: Working current: Han 16A/16 poles + up to 2.5 mm 600V UL/CSA 16 A Female insert: Screw termination: Working voltage: Working current: Han 16 A/16 poles + up to 2.5 mm 600V UL/CSA 16 A Housing bulkhead mounting: Material: Han 16 A Die cast light alloy Panel cut out 73 x 24 mm Flange gasket Degree of protection according to IEC 529 / EN 60529 in locked position: IP 65 Page 8 / 12 O 3,4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: HARTING: 10200160000