Specifications
VDE 0110 Standard concerning
. clearance and creepage
. distances
VDE 0627 Connectors
Termination
• Screw terminal
Inserts
• Leading protective ground
• Polarized for correct mating
• Interchangeability of male & female
inserts in hoods and housings
Housings
• Electrical connection
with protective ground
• High mechanical strength and
vibration resistance
ensured by locking levers.
Accessories
• Cable glands are not included in
the standard kit and must be
ordered separately.
Economic
and Reliable
Connections
Standards
UL, CSA, SEV for inserts and housings
Page 2 / 12
Han-Kit® 16 B
Locking lever
Sealing
Flange Gasket
Contact Screws
Male Connector
Female Connector PE panel with
PE contact
Fixing Screws
Cable Gland
Hood
1 Kit per Packaging -
Easy Choice for You!
Certified according to DIN EN ISO 9001
in design/ development, production,
installation and service.
Note
Connectors should not be connected and disconnected under electrical load. Connectors are
electrical components which should be installed by properly trained personnel only!
Connectors of the same or different series that are mounted in a side-by-side configuration may
be protected against incorrect mating through the use of coding pins and bushings.
General Remarks
It is the user's responsibility to check
whether the components belonging
to these kits comply with different
regulations from those stated in
special fields of application which we
are unable to foresee.
We reserve the right to modify
designs in order to improve quality,
keep pace with technological
advancement or meet particular
requirements in production.
This information leaflet must not be
used in any from or manner without
our prior approval in writing
(Copyright Law, Fair Trading Law,
Civil Code).
We are bound by the German
version only.
Bulkhead mounted
Housing
Han-Kit®
Screw terminal
Page 3 / 12
a
Derating Diagrams
The current carrying
capacity is limited by
maximum temperature of
materials for inserts and
contacts including
terminals. The current
capacity-curve is valid for
continuous, not interrupted
current-loaded contacts of
connectors when
simultaneous power on all
contacts is given, without
exceeding the maximum
temperature according to
DIN IEC 512-3.
Working Current
Ambient Temperature
Ambient Temperature
Working Current
Wire gauge: 2.5 mm² = AWG 14
Inserts Max. Wire Gauge Stripping Length Sheath Length
(mm²) AWG a (mm) x (mm)
Han 3A.... + 4A.... 2.5 14 4.5 40 mm
Han 10 A 2.5 14 7 85 mm
Han 16 A 2.5 14 7 100 mm
Han 6 B 2.5 14 7 70 mm
Han 10 B 2.5 14 7 90 mm
Han 16 B 2.5 14 7 110 mm
Han 24 B 2.5 14 7 130 mm
Han-Kit®
1 = Han 3 A / 4 A
2 = Han 10 A
3 = Han 16 A
1 = Han 6 B
2 = Han 10 B
3 = Han 16 B
4 = Han 24 B
Recommended Tightning Torques and Screw Driver Blades
Size of screw Type of
connector
Tightening
torque
[Nm]
Tightening
torque
[In-lbf]
Recomm.
Screw
drive size
(mm)
M3 Screw Contact
Han 3A.../4A... 0.5 4.4 0.5 x 3.5
M3 Screw Contact
Han 10+16A +
6-24B 0.5 4.4 0.5 x 3.5
M3.5 PE-Contact Han
10+16A 1.2 10.6 0.5 x 3.5
M4 PE-Contact Han
6-24B 1.2 10.6 0.5 x 3.5
Hood:
Material:
Degree of protection:
Cable entry protection:
Han 10 A
Die cast light alloy
IP 65
Pg 16
Male insert:
Screw termination:
Working voltage:
Working current:
Han 10 A/10 poles +
up to 2.5 mm²
600V UL/CSA
16 A
Han 10 A/10 poles +
up to 2.5 mm²
600V UL/CSA
16 A
Female insert:
Screw termination:
Working voltage:
Working current:
Housing
bulkhead mounting:
Material:
Flange gasket
Han 10 A
Die cast light alloy
Hood:
Material:
Degree of protection:
Cable entry protection:
Han 16 A
Die cast light alloy
IP 65
Pg 16
Male insert:
Screw termination:
Working voltage:
Working current:
Han 16A/16 poles +
up to 2.5 mm²
600V UL/CSA
16 A
Han 16 A/16 poles +
up to 2.5 mm²
600V UL/CSA
16 A
Female insert:
Screw termination:
Working voltage:
Working current:
Housing
bulkhead mounting:
Material:
Flange gasket
Han 16 A
Die cast light alloy
Panel cut out
73 x 24 mm
Page 8 / 12
Panel cut out
57 x 24 mm
Degree of protection according to IEC 529 / EN 60529
in locked position: IP 65
Degree of protection according to IEC 529 / EN 60529
in locked position: IP 65
Ø 3,4
Ø 3,4
Part Number: 10 20 010 0000
Han-Kit®-10A
Han-Kit®
Han-Kit®-16A Part Number: 10 20 016 0000
