A KYOCERA GROUP COMPANY AVX Multilayer Ceramic Leaded Capacitors NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all applications. Index The Capacitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Dielectrics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13 Radial Leads SKYCAPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-19 CERALAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-23 PACKAGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25 Two-Pin DIPs DIPGUARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27 Axial Leads SPINGUARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-32 MINI-CERAMIC CAPACITOR . . . . . . . . . . . . . . . . . 33 CERALAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-37 PACKAGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Military MIL-C-39014 Radial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-42 Axial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-46 2-Pin DIPs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-52 MIL-C-11015 Radial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53-54 Axial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56 MIL-C-20 Radial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-58 Axial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-62 MIL-C-123 Radial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63-64 Axial . . . . . . . . . . . . . . . . .65-66 2-Pin DIPs . . . . . . . . . .67 Marking . . . . . . . .68 Cross-Ref . . . .68 European CECC Specifications . .69 The Capacitor GENERAL INFORMATION Potential Change - A capacitor is a reactive component which reacts against a change in potential across it. This is shown by the equation for the linear charge of a capacitor: Iideal = C dV dt A capacitor is a component which is capable of storing electrical energy. It consists of two conductive plates (electrodes) separated by insulating material which is called the dielectric. A typical formula for determining capacitance is: where C = .224 KA t I = Current C = Capacitance dV/dt = Slope of voltage transition across capacitor C = capacitance (picofarads) K = dielectric constant (Vacuum = 1) A = area in square inches t = separation between the plates in inches (thickness of dielectric) .224 = conversion constant (.0884 for metric system in cm) Thus an infinite current would be required to instantly change the potential across a capacitor. The amount of current a capacitor can "sink" is determined by the above equation. Equivalent Circuit - A capacitor, as a practical device, exhibits not only capacitance but also resistance and inductance. A simplified schematic for the equivalent circuit is: Capacitance - The standard unit of capacitance is the farad. A capacitor has a capacitance of 1 farad when 1 coulomb charges it to 1 volt. One farad is a very large unit and most capacitors have values in the micro (10-6), nano (10-9) or pico (10-12) farad level. RP Dielectric Constant - In the formula for capacitance given above the dielectric constant of a vacuum is arbitrarily chosen as the number 1. Dielectric constants of other materials are then compared to the dielectric constant of a vacuum. L RS C C = Capacitance Rs = Series Resistance Dielectric Thickness - Capacitance is indirectly proportional to the separation between electrodes. Lower voltage requirements mean thinner dielectrics and greater capacitance per volume. L = Inductance Rp = Parallel Resistance Reactance - Since the insulation resistance (Rp) is normally very high, the total impedance of a capacitor is: Area - Capacitance is directly proportional to the area of the electrodes. Since the other variables in the equation are usually set by the performance desired, area is the easiest parameter to modify to obtain a specific capacitance within a material group. Z= where R + (X - X ) 2 S 2 C L Z = Total Impedance Rs = Series Resistance XC = Capacitive Reactance = Energy Stored - The energy which can be stored in a capacitor is given by the formula: 1 2 fC XL = Inductive Reactance = 2 fL E = 12CV2 The variation of a capacitor's impedance with frequency determines its effectiveness in many applications. E = energy in joules (watts-sec) V = applied voltage C = capacitance in farads Phase Angle - Power Factor and Dissipation Factor are often confused since they are both measures of the loss in a capacitor under AC application and are often almost identical in value. In a "perfect" capacitor the current in the capacitor will lead the voltage by 90. 2 The Capacitor Insulation Resistance - Insulation Resistance is the resistance measured across the terminals of a capacitor and consists principally of the parallel resistance RP shown in the equivalent circuit. As capacitance values and hence the area of dielectric increases, the I.R. decreases and hence the product (C x IR or RC) is often specified in ohm farads or more commonly megohm microfarads. Leakage current is determined by dividing the rated voltage by IR (Ohm's Law). I (Ideal) I (Actual) Loss Angle Phase Angle f Dielectric Strength - Dielectric Strength is an expression of the ability of a material to withstand an electrical stress. Although dielectric strength is ordinarily expressed in volts, it is actually dependent on the thickness of the dielectric and thus is also more generically a function of volts/mil. V IR s In practice the current leads the voltage by some other phase angle due to the series resistance RS. The complement of this angle is called the loss angle and: Dielectric Absorption - A capacitor does not discharge instantaneously upon application of a short circuit, but drains gradually after the capacitance proper has been discharged. It is common practice to measure the dielectric absorption by determining the "reappearing voltage" which appears across a capacitor at some point in time after it has been fully discharged under short circuit conditions. Power Factor (P.F.) = Cos f or Sine Dissipation Factor (D.F.) = tan for small values of the tan and sine are essentially equal which has led to the common interchangeability of the two terms in the industry. Corona - Corona is the ionization of air or other vapors which causes them to conduct current. It is especially prevalent in high voltage units but can occur with low voltages as well where high voltage gradients occur. The energy discharged degrades the performance of the capacitor and can in time cause catastrophic failures. Equivalent Series Resistance - The term E.S.R. or Equivalent Series Resistance combines all losses both series and parallel in a capacitor at a given frequency so that the equivalent circuit is reduced to a simple R-C series connection. CERAMIC CAPACITORS E.S.R. Multilayer ceramic capacitors are manufactured by mixing the ceramic powder in an organic binder (slurry) and casting it by one technique or another into thin layers typically ranging from about 3 mils in thickness down to 1 mil or thinner. C Dissipation Factor The DF/PF of a capacitor tells what percent of the apparent power input will turn to heat in the capacitor. Metal electrodes are deposited onto the green ceramic layers which are then stacked to form a laminated structure. The metal electrodes are arranged so that their terminations alternate from one edge of the capacitor to another. Upon sintering at high temperature the part becomes a monolithic block which can provide extremely high capacitance values in small mechanical volumes. Figure 1 shows a pictorial view of a multilayer ceramic capacitor. Dissipation Factor = E.S.R. = (2 fC) (E.S.R.) XC The watts loss are: Watts loss = (2 fCV2) (D.F.) Very low values of dissipation factor are expressed as their reciprocal for convenience. These are called the "Q" or Quality factor of capacitors. Multilayer ceramic capacitors are available in a wide range of characteristics, Electronic Industries Association (EIA) and the military have established categories to help divide the 3 The Capacitor basic characteristics into more easily specified classes. The basic industry specification for ceramic capacitors is EIA specification RS-198 and as noted in the general section it specifies temperature compensating capacitors as Class 1 capacitors. These are specified by the military under specification MIL-C-20. General purpose capacitors with non-linear temperature coefficients are called Class 2 capacitors by EIA and are specified by the military under MIL-C-11015 and MIL-C-39014. The new high reliability military specification, MIL-C-123 covers both Class 1 and Class 2 dielectrics. CERAMIC LAYER ELECTRODE TERMINATE EDGE Class 1 - Class 1 capacitors or temperature compensating capacitors are usually made from mixtures of titanates where barium titanate is normally not a major part of the mix. They have predictable temperature coefficients and in general, do not have an aging characteristic. Thus they are the most stable capacitor available. Normally the T.C.s of Class 1 temperature compensating capacitors are C0G (NP0) (negative-positive 0 ppm/C). Class 1 extended temperature compensating capacitors are also manufactured in T.C.s from P100 through N2200. TERMINATE EDGE END TERMINATIONS ELECTRODES Class 2 - General purpose ceramic capacitors are called Class 2 capacitors and have become extremely popular because of the high capacitance values available in very small size. Class 2 capacitors are "ferro electric" and vary in capacitance value under the influence of the environmental and electrical operating conditions. Class 2 capacitors are affected by temperature, voltage (both AC and DC), frequency and time. Temperature effects for Class 2 ceramic capacitors are exhibited as non-linear capacitance changes with temperature. MARGIN Figure 1 Table 1: EIA Temperature Compensating Ceramic Capacitor Codes TC TOLERANCES (1) (1) Capacitance in pF NP0 N030 10 and Over +30 -75 10 and Over Closest MIL-C-20D Equivalent EIA Desig. N080 N150 N220 N330 N470 N750 N1500 N2200 +30 -80 -55C to +25C in PPM/C +30 +30 +30 +60 -90 -105 -120 -180 +60 -210 +120 -340 +250 -670 +500 -1100 30 30 +25C to +85C in PPM/C 30 30 30 60 60 120 250 500 CG HG LG PG RG SH TH UJ NONE NONE C0G S1G U1G P2G R2G S2H T2H U2J P3K R3L Table 1 indicates the tolerance available on specific temperature characteristics. It may be noted that limits are established on the basis of measurements at +25C and +85C and that T.C. becomes more negative at low temperature. Wider tolerances are required on low capacitance values because of the effects of stray capacitance. 4 The Capacitor Table 2: MIL and EIA Temperature Stable and General Application Codes EIA CODE Percent Capacity Change Over Temperature Range MIL CODE Symbol Temperature Range A -55C to +85C B C RS198 -55C to +125C X7 X5 Y5 -55C to +125C -55C to +85C -30C to +85C -55C to +150C Z5 +10C to +85C Code Percent Capacity Change D E F P R S T U V 3.3% 4.7% 7.5% 10% 15% 22% +22%, -33% +22%, - 56% +22%, -82% Cap. Change Zero Volts Cap. Change Rated Volts R +15%, -15% +15%, -40% W +22%, -56% +22%, -66% X +15%, -15% +15%, -25% Y +30%, -70% +30%, -80% Z +20%, -20% +20%, -30% Symbol Temperature characteristic is specified by combining range and change symbols, for example BR or AW. Specification slash sheets indicate the characteristic applicable to a given style of capacitor. EXAMPLE - A capacitor is desired with the capacitance value at 25C to increase no more than 7.5% or decrease no more than 7.5% from -30C to +85C. EIA Code will be Y5F. In specifying capacitance change with temperature for Class 2 materials, EIA expresses the capacitance change over an operating temperature range by a 3 symbol code. The first symbol represents the cold temperature end of the temperature range, the second represents the upper limit of the operating temperature range and the third symbol represents the capacitance change allowed over the operating temperature range. Table 2 provides a detailed explanation of the EIA system. reasonable range tends to increase both capacitance and dissipation factor readings. If a high enough AC voltage is applied, eventually it will reduce capacitance just as a DC voltage will. Figure 2 shows the effects of AC voltage. Capacitor specifications specify the AC voltage at which to measure (normally 0.5 or 1 VAC) and application of the wrong voltage can cause spurious readings. Figure 3 gives the voltage coefficient of dissipation factor for various AC voltages at 1 kilohertz. Applications of different frequencies will affect the percentage changes versus voltages. Effects of Voltage - Variations in voltage affects only the capacitance and dissipation factor. The application of DC voltage reduces both the capacitance and dissipation factor while the application of an AC voltage within a Cap. Change vs. A.C. Volts AVX X7R T.C. D.F. vs. A.C. Measurement Volts AVX X7R T.C. 10.0 50 Dissipation Factor Percent Capacitance Change Percent Temperature Range 40 30 20 10 0 12.5 25 37.5 Volts AC at 1.0 KHz Curve 1 - 100 VDC Rated Capacitor 8.0 Curve 2 - 50 VDC Rated Capacitor Curve 3 - 25 VDC Rated Capacitor 6.0 Curve 3 Curve 2 4.0 Curve 1 2.0 0 50 .5 1.0 1.5 2.0 2.5 AC Measurement Volts at 1.0 KHz Figure 2 Figure 3 5 The Capacitor The effect of the application of DC voltage is shown in Figure 4. The voltage coefficient is more pronounced for higher K dielectrics. These figures are shown for room temperature conditions. The combination characteristic known as voltage temperature limits which shows the effects of rated voltage over the operating temperature range is shown in Figure 5 for the military BX characteristic. "Q" vs. Frequency 2000 "Q" Factor 1600 Capacitance Change Percent Cap. Change vs. D.C. Volts AVX X7R T.C. 800 400 0 AVX X7R T.C. -2.5 0 -5 1 KHz 10 KHz 100 KHz 1 MHz 10 MHz 100 MHz 1 GHz Frequency -7.5 Figure 7 Effects of Frequency - Frequency affects capacitance and dissipation factor as shown in Figures 6 and 7. -10 25% 50% 75% Percent Rated Volts 100% Variation of impedance with frequency is an important consideration for decoupling capacitor applications. Lead length, lead configuration and body size all affect the impedance level over more than ceramic formulation variations. (Figure 8) Typical Cap. Change vs. Temperature AVX X7R T.C. Capacitance Change Percent 1200 2.5 Figure 4 Effects of Time - Class 2 ceramic capacitors change capacitance and dissipation factor with time as well as temperature, voltage and frequency. This change with time is known as aging. Aging is caused by a gradual re-alignment of the crystalline structure of the ceramic and produces an exponential loss in capacitance and decrease in dissipation factor versus time. A typical curve of aging rate for semistable ceramics is shown in Figure 9 and a table is given showing the aging rates of various dielectrics. +20 +10 0VDC 0 RVDC -10 -20 -30 -55 -35 -15 +5 If a ceramic capacitor that has been sitting on the shelf for a period of time, is heated above its curie point, (125C for 4 hours or 150C for 12 hour will suffice) the part will de-age and return to its initial capacitance and dissipation factor readings. Because the capacitance changes rapidly, immediately after de-aging, the basic capacitance measurements are normally referred to a time period sometime after the de-aging process. Various manufacturers use different time bases but the most popular one is one day or twenty-four hours after "last heat." Change in the aging curve can be caused by the application of voltage and other stresses. The possible changes in capacitance due to de-aging by heating the unit explain why capacitance changes are allowed after test, such as temperature cycling, moisture resistance, etc., in MIL specs. The application of high voltages such as dielectric withstanding voltages also tends to de-age capacitors and is why re-reading of capacitance after 12 or 24 hours is allowed in military specifications after dielectric strength tests have been performed. +25 +45 +65 +85 +105 +125 Temperature Degrees Centigrade Figure 5 Cap. Change vs. Frequency Capacitance Change Percent AVX C0G (NP0) T.C. AVX C0G (NP0) T.C. 0 AVX X7R T.C. -10 -20 -30 1 KHz 10 KHz 100 KHz 1 MHz 10 MHz 100 MHz 1 GHz Frequency Figure 6 6 The Capacitor Impedance vs. Frequency Effect of Capacitance - AVX SpinGuards Typical Curve of Aging Rate X7R Dielectric +1.5 Log Impedance, Ohms 10.00 Capacitance Change Percent 0 1.00 .001mF .01mF 0.10 .1mF .33mF 0.01 1 10 100 Log Frequency, MHz 1000 -1.5 -3.0 -4.5 -6.0 -7.5 1 Impedance vs. Frequency Effect of Dielectric - AVX DIPGuards 0 (NP G F C0 01 .0 Figure 9 R X7 1.0 0.1 1 Characteristic C0G (NP0) X7R Z5U Y5V 1000 10,000 100,000 Hours Max. Aging Rate %/Decade None 2 3 5 Effects of Mechanical Stress - High "K" dielectric ceramic capacitors exhibit some low level piezoelectric reactions under mechanical stress. As a general statement, the piezoelectric output is higher, the higher the dielectric constant of the ceramic. It is desirable to investigate this effect before using high "K" dielectrics as coupling capacitors in extremely low level applications. 10 100 Reliability - Historically ceramic capacitors have been one of the most reliable types of capacitors in use today. The approximate formula for the reliability of a ceramic capacitor is: 200 Log Frequency, MHz Lo = Lt Impedance vs. Frequency Effect of Lead Length - Military CKR05 .01mF 100.0 Log Impedance, Ohms 100 ) F 1 .0 F R 22 F X7 .0 7 F R F 4 .0 .22 0.1 R Z5U X7 X7 Log Impedance, Ohms 10.0 10 Vt Vo X Tt To Y where Lo = operating life T t = test temperature and L t = test life To = operating temperature in C V t = test voltage Vo = operating voltage X,Y = see text .500" .250" .062" 0" 10.0 1.0 Historically for ceramic capacitors exponent X has been considered as 3. The exponent Y for temperature effects typically tends to run about 8. 0.1 1 10 100 Log Frequency, MHz 1000 Figure 8 7 The Capacitor GENERAL ELECTRICAL AND ENVIRONMENTAL SPECIFICATIONS Vibration - Capacitors shall be tested in accordance with Method 208 Test Condition D of MIL-STD-202 with the bodies rigidly clamped. The specimens shall be tested in 3 mutually perpendicular planes for a total of 8 hours with 125% rated DC voltage applied. No evidence of opens, intermittents or shorts is permitted. Many AVX ceramic capacitors are purchased in accordance with Military Specifications, MIL-C-39014, MIL-C-11015, MIL-C-20, MIL-C-55681, and MIL-C-123 or according to individual customer specification. When ordered to these specifications, the parts will meet the requirements set forth in these documents. The General Electrical and Environmental Specifications listed below detail test conditions which are common to the foregoing and to most ceramic capacitor specifications. If additional information is needed, AVX Application Engineers are ready to assist you. Shock - Capacitors shall be tested in accordance with Method 213 Condition 1 (100 Gs) of MIL-STD-202 with the bodies rigidly clamped. No evidence of opens, intermittents or shorts is permitted. Thermal Shock and Immersion - Capacitors shall be tested in accordance with Method 107 Condition A of MIL-STD-202 with high test temperature (maximum rated operating temperature) followed by Method 104 of MIL-STD-202 Test Condition B. Capacitance - Capacitance shall be tested in accordance with Method 305 of MIL-STD-202. Class 1 dielectric to 1000 pF measured at 1 MHz, 100 KHz, > 1000 pF measured at 1 KHz 100 Hz both at 1.0 0.2 VAC. Class 2 dielectrics (except High K) to 100 pF shall be measured at 1 MHz 100 KHz, > 100 pF measured at 1 KHz 100 Hz both at 1.0 0.2 VAC. High K dielectrics measured at 1 KHz 100 Hz with less than 0.5 VAC or less applied. Moisture Resistance - Capacitors shall be tested in accordance with Method 106 of MIL-STD-202 with rated voltage or 100 VDC whichever is less applied for the first 10 cycles. Resistance to Solder Heat - Capacitors shall be tested in accordance with Method 210 of MIL-STD-202 with immersion to .050 of body. AVX Ceralam capacitors are manufactured with solder which melts at a temperature greater than 450F. Dissipation Factor - D.F. shall be measured at the same frequency and voltage as specified for capacitance. Dielectric Strength - The dielectric strength shall be measured in accordance with Method 301 of MIL-STD-202 with a suitable resistor in series with the power supply to limit the charging current to 50 ma. max. General Considerations - The application of voltage or temperature usually causes temporary changes in the capacitance of Class 2 ceramic capacitors. These changes are normally in the positive direction and may cause out-oftolerance capacitance readings. If a capacitance reading is made immediately after a dielectric strength or insulation resistance test and parts are high capacitance, they should be re-read after a minimum wait of 12 hours. Insulation Resistance - Insulation Resistance shall be measured in accordance with Method 302 of MIL-STD-202 with rated voltage or 200 VDC whichever is less applied. The current shall be limited to 50 ma. max. and the charging time shall be 2.0 minutes maximum. Burn-In - (Where specified.) 100% of the parts shall be subjected to 5 cycles of Thermal Shock per Method 107 Test Condition A of MIL-STD-202 followed by voltage conditioning at twice rated voltage and maximum rated temperature for 100 hours or as specified. After Burn-In, parts shall meet all initial requirements. Barometric Pressure - Capacitors shall be tested in accordance with Method 105 of MIL-STD-202 Test Condition D (100,000 ft.) with 100% rated voltage applied for 5 seconds with current limited to 50 ma. No evidence of flashover or damage is permitted. Solderability - Capacitors shall be tested in accordance with Method 208 of MIL-STD-202 with 95% coverage of new solder. 8 The Capacitor BASIC CAPACITOR FORMULAS I. Capacitance (farads) English: C = .224 K A TD Metric: C = .0884 K A TD XI. Equivalent Series Resistance (ohms) E.S.R. = (D.F.) (Xc) = (D.F.) / (2 fC) XII. Power Loss (watts) Power Loss = (2 fCV2) (D.F.) XIII. KVA (Kilowatts) KVA = 2 fCV2 x 10 -3 II. Energy stored in capacitors (Joules, watt - sec) E = 12 CV2 III. Linear charge of a capacitor (Amperes) dV I=C dt XIV. Temperature Characteristic (ppm/C) T.C. = Ct - C25 x 106 C25 (Tt - 25) IV. Total Impedance of a capacitor (ohms) XV. Cap Drift (%) C1 - C2 C.D. = C1 Z = RS + (XC - XL ) V. Capacitive Reactance (ohms) 1 xc = 2 fC 2 2 XVI. Reliability of Ceramic Capacitors Vt L0 X Tt Y = Lt Vo To ( ) ( ) VI. Inductive Reactance (ohms) xL = 2 fL XVII. Capacitors in Series (current the same) Any Number: 1 = 1 + 1 --- 1 CT C1 C2 CN C1 C2 Two: CT = C1 + C2 VII. Phase Angles: Ideal Capacitors: Current leads voltage 90 Ideal Inductors: Current lags voltage 90 Ideal Resistors: Current in phase with voltage XVIII. Capacitors in Parallel (voltage the same) CT = C1 + C2 --- + CN VIII. Dissipation Factor (%) D.F.= tan (loss angle) = E.S.R. = (2 fC) (E.S.R.) Xc IX. Power Factor (%) P.F. = Sine (loss angle) = Cos (phase angle) f P.F. = (when less than 10%) = DF XIX. Aging Rate A.R. = % Pico Nano Micro Milli Deci Deca Kilo Mega Giga Tera X 10-12 X 10-9 X 10-6 X 10-3 X 10-1 X 10+1 X 10+3 X 10+6 X 10+9 X 10+12 D C/decade of time XX. Decibels db = 20 log V1 V2 X. Quality Factor (dimensionless) Q = Cotan (loss angle) = 1 D.F. METRIC PREFIXES x 100 SYMBOLS K = Dielectric Constant f = frequency Lt = Test life A = Area L = Inductance Vt = Test voltage TD = Dielectric thickness = Loss angle Vo = Operating voltage V = Voltage f = Phase angle Tt = Test temperature t = time X & Y = exponent effect of voltage and temp. To = Operating temperature Rs = Series Resistance Lo = Operating life 9 C0G (NP0) Dielectric "A" GENERAL SPECIFICATIONS TYPICAL CHARACTERISTICS Capacitance Range See Individual Parts Specifications Temperature Coefficient Capacitance Test at 25C Measured at 1 VRMS max. at 1 KHz (1 MHz for 1,000 pF or less) % Capacitance Capacitance Tolerances C = .25 pF, D = .50 pF, E = 0.5%, F = 1.0%, G = 2%, H = 3%, J = 5%, K = 10%, M = 20% For values less than 10 pF tightest tolerance available is .25 pF Typical Capacitance Change Envelope: 030 ppm/C +0.5 0 -0.5 Operating Temperature Range -55C to +125C -55 -35 -15 Temperature Characteristic 0 30 ppm/C Voltage Ratings 200,100 & 50 Vdc +5 +25 +45 +65 +85 +105 +125 Temperature C Aging Rate Insulation Resistance 25C (MIL-STD-202-Method 302) 100 K megohms or 1000 megohms - F minimum, whichever is less +0.2 % Capacitance Dissipation Factor .15% max. (+25C and +125C) for values greater than 30 pF or Q = 20 x C + 400 for values of 30 pF and below. 1.0 VRMS, 1 MHz for values 1,000 pF, and 1 KHz for values > 1,000 pF +0.1 0 -0.1 -0.2 Dielectric Strength 250% of rated Vdc 1 10 Life Test (1,000 hours) 200% rated voltage at +125C 100 Hours 1,000 10,000 Voltage Coefficient Moisture Resistance (MIL-STD-202-Method 106) Immersion Cycling (MIL-STD-202-Method 104, condition B) For current reliability information, consult factory. % Capacitance +0.2 Thermal Shock (MIL-STD-202-Method 107, condition A, at rated elevated temperature) -55C to +125C +0.1 0 -0.1 -0.2 25 50 125 100 75 D. C. Volts Applied 150 175 Insulation Resistance vs. Temp. Insulation Resistance (Ohm-Farads) 10,000 1,000 100 0 10 +20 +25 +40 +60 +80 +100 Temperature C +150 200 X7R Dielectric "C" GENERAL SPECIFICATIONS TYPICAL CHARACTERISTICS Capacitance Range See Individual Parts Specifications Temperature Coefficient Capacitance Test at 25C Measured at 1 VRMS max. at 1 KHz +12 +6 % Capacitance Capacitance Tolerances J = 5%, K = 10%, M = 20% Operating Temperature Range -55C to +125C Temperature Characteristic 15% (0 Vdc) 0 -6 -12 -18 -24 -75 -50 -25 Voltage Ratings 200,100 & 50 Vdc Dissipation Factor 2.5% max. at 1 KHz, 1 VRMS max. 0 +25 +50 +75 +100 +125 Temperature C Capacitance vs. Frequency Insulation Resistance 25C (MIL-STD-202-Method 302) 100 K megohms or 1000 megohms - F minimum, whichever is less % Capacitance +20 Dielectric Strength 250% of rated Vdc +10 0 -10 -20 Life Test (1,000 hours) 200% rated voltage at +125C Moisture Resistance (MIL-STD-202-Method 106) 1 kHz Thermal Shock (MIL-STD-202-Method 107, condition A, at rated elevated temperature) -55C to +125C 10 kHz 100 kHz 1 MHz Frequency 100 MHz 10 MHz Voltage Coefficient +10 Immersion Cycling (MIL-STD-202-Method 104, condition B) 0 % Capacitance For current reliability information, consult factory. 100 Vdc Rated Parts -10 -20 50/63 Rated Parts -30 -40 40 20 60 100 80 D.C. Volts Applied Insulation Resistance vs. Temp. Insulation Resistance (Ohm-Farads) 10,000 1,000 100 10 11 +20 +25 +40 +60 +80 +100 Temperature C +150 Z5U Dielectric "E" GENERAL SPECIFICATIONS TYPICAL CHARACTERISTICS Capacitance Range See Individual Parts Specifications Temperature Coefficient +30 Capacitance Test at 25C Measured at 0.5 VRMS max. at 1 KHz % Capacitance +20 Capacitance Tolerances M = 20%, Z = +80%, -20%, P = GMV* Operating Temperature Range +10C to +85C 0 -20 -40 -60 -60 Temperature Characteristic +22%, -56% -40 Voltage Ratings 100 & 50 Vdc -20 0 +20 +40 +60 +80 +100 +120 +140 Temperature C Capacitance vs. Frequency Dissipation Factor 4.0% max. at 1 KHz, .5 VRMS max. 0 % Capacitance Insulation Resistance 25C (MIL-STD-202-Method 302) 10 K megohms or 100 megohms - F minimum, whichever is less Dielectric Strength 200% of rated Vdc -10 -20 -30 Life Test (1,000 hours) 150% rated voltage at +85C -40 1 kHz Moisture Resistance (MIL-STD-202-Method 106) Immersion Cycling (MIL-STD-202-Method 104, condition B) For current reliability information, consult factory. *Guaranteed Minimum Value 100 kHz 1 MHz Frequency 10 kHz 10 MHz 100 MHz Insulation Resistance (Ohm-Farads) Insulation Resistance vs. Temp. 100k 10k 1000 100 10 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 Temperature C Voltage Coefficient +20 % Capacitance 0 -20 Voltage coefficient for individual capacitors within this envelope must be calculated based upon WVDC / MIL. -40 -60 -80 0 12 25 50 75 Volts D.C. Applied 100 125 Special Dielectrics Y5V (Dielectric "G") GENERAL SPECIFICATIONS TYPICAL CHARACTERISTICS Capacitance Range Contact AVX Typical Temperature Characteristic Y5V 120 Capacitance Tolerances +80%, -20% 100 Percent of Capacitance Capacitance Test at 25C Measured at 1.0 VRMS max. at 1 KHz Operating Temperature Range -30C to +85C Temperature Characteristic +22%, -82% Voltage Ratings 100 & 50 Vdc 80 60 40 20 Dissipation Factor 7% max. (<25 volts) 5% max. (25 volts) at 1 KHz, 1.0 VRMS max. -50 -30 0 +25 Temperature, oC Insulation Resistance 25C (MIL-STD-202-Method 302) 10 K megohms or 100 megohms - F minimum, whichever is less Dielectric Strength 200% of rated Vdc Life Test (1,000 hours) 150% rated voltage at +85C Moisture Resistance (MIL-STD-202-Method 106) Immersion Cycling (MIL-STD-202-Method 104, condition B) 13 +60 +85 Radial Leads/SkyCap(R) GENERAL INFORMATION Dimensions: Millimeters (Inches) W Max. W Max. H Max. H Max. AVX SR Series LD Nom. Conformally Coated Radial Leaded MLC T Max. 1.0" Min. Temperature Coefficients: C0G (NP0), X7R, Z5U T Max. LD Nom. 1.52/.060 Max. 1.0" Min. 200, 100, 50 Volts (300V, 400V & 500V also available) L.S. .762/.030 Case Material: Epoxy Styles SR15, SR20, SR30, SR40, SR50 H Max. See Note L.S. .762/.030 W Max. Styles SR22, SR27 Lead Material: Solderable LD Nom. T Max. 1.0" Min. L.S. .762/.030 See Note Note: Coating clean .784/.031 min. above seating plane Style SR21 HOW TO ORDER AVX Styles: SR15, SR20, SR21, SR22, SR27, SR30, SR40, SR50 Part Number Example SR21 AVX Style Voltage Temperature Coefficient Sig. Figures of Capacitance Multiplier (Additional no. of zeros) Capacitance Tolerance Failure Rate Not Applicable Leads 5 E 10 4 Part Number Codes Voltages: 50V = 5, 100V = 1, 200V = 2, 300V = 9, 400V = 8, 500V = 7 MARKING Temp. Coefficient: C0G (NP0) = A, X7R = C, Z5U = E FRONT Sig. Figures of Capacitance and Multiplier: First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. (For values below 10pF, use "R" in place of decimal point, e.g., 1R4 = 1.4 pF). XXX X X X Capacitance Tolerances: C0G (NP0): C = .25pF, D = .5pF, F = 1.0% (>50 pF only) G = 2.0% (>25 pF only), J = 5%, K = 10% X7R: J = 5%, K = 10%, M = 20% Z5U: M = 20%, Z = +80%,-20% M A A BACK Capacitance Code Tolerance Code Voltage Code Temp. Char. Code XXX A XX 3 Digit Date Code Lot Code AVX Logo PACKAGING REQUIREMENTS Failure Rate: A = Not Applicable SR15, 20, 21, 22, 27, 30 SR40, 50 Leads: T = Trimmed Leads, .230" .030" A = Long Leads, 1.0" minimum (Other lead lengths are available, contact AVX) Quantity per Bag 1000 Pieces 500 Pieces Note: SR15, SR20, SR21, SR30, and SR40 available on tape and reel per EIA specifications RS-468. See Pages 24 and 25. 14 Radial Leads/SkyCap(R) C0G (NP0) Dielectric SIZE AND CAPACITANCE SPECIFICATIONS EIA Characteristic Dimensions: Millimeters (Inches) AVX Style Cap. in.* pF 1.0-9.9 10 15 22 33 39 47 68 100 150 220 330 390 470 680 1000 1500 2200 3900 4700 6800 8200 10,000 15,000 22,000 33,000 39,000 47,000 68,000 100,000 SR15 SR20 SR21 AVX "Insertable" SR07 SR29 SR59 Width 3.81 5.08 5.08 (W) (.150) (.200) (.200) Height 3.81 5.08 5.08 (H) (.150) (.200) (.200) Thickness 2.54 3.175 3.175 (T) (.100) (.125) (.125) Lead Spacing 2.54 2.54 5.08 (L.S.) (.100) (.100) (.200) Lead Diameter .508 .508 .508 (L.D.) (.020) (.020) (.020) Industry Preferred WVDC WVDC WVDC Values in Blue 200 100 50 200 100 50 200 100 50 SR151A1R0DAA SR151A100KAA SR-----A150KAA SR-----A220KAA SR-----A330KAA SR-----A390KAA SR-----A470KAA SR-----A680KAA SR151A101KAA SR-----A151KAA SR-----A221KAA SR-----A331KAA SR-----A391KAA SR-----A471KAA SR-----A681KAA SR211A102KAA SR-----A152KAA SR-----A222KAA SR-----A392KAA SR-----A472KAA SR-----A682KAA SR-----A822KAA SR305A103KAA SR-----A153KAA SR22 SR-----A223KAA SR-----A333KAA SR-----A393KAA SR-----A473KAA SR-----A683KAA SR-----A104KAA For other styles, voltages, tolerances and lead lengths see Part No. Codes or contact factory. *Other capacitance values available upon special request. = Industry preferred values = SR20 only NOTE: Capacitance Ranges available for SR12 SR62 SR64 SR89 same same same same as as as as SR15 SR21 SR30 SR21 15 SR27 N/A N/A 5.08 6.604 (.200) (.260) 5.08 6.35 (.200) (.250) 3.175 4.06 (.125) (.160) 6.35 7.62 (.250) (.300) .508 .508 (.020) (.020) WVDC WVDC 200 100 50 200 100 50 SR30 SR40 SR50 SR65 7.62 (.300) 7.62 (.300) 3.81 (.150) 5.08 (.200) .508 (.020) WVDC 100 50 SR75 10.16 (.400) 10.16 (.400) 3.81 (.150) 5.08 (.200) .508 (.020) WVDC 100 50 N/A 12.70 (.500) 12.70 (.500) 5.08 (.200) 10.16 (.400) .635 (.025) WVDC 100 50 Radial Leads/SkyCap(R) X7R Dielectric SIZE AND CAPACITANCE SPECIFICATIONS EIA Characteristic Dimensions: Millimeters (Inches) AVX Style Cap. in.* pF 470 1000 1500 2200 3300 4700 6800 10,000 15,000 22,000 33,000 47,000 68,000 100,000 150,000 220,000 330,000 390,000 470,000 1.0 F 2.2 F 2.7 F 4.7 F SR15 AVX "Insertable" SR07 Width 3.81 (W) (.150) Height 3.81 (H) (.150) Thickness 2.54 (T) (.100) Lead Spacing 2.54 (L.S.) (.100) Lead Diameter .508 (L.D.) (.020) Industry Preferred WVDC Values in Blue 200 100 50 SR-----C471KAA SR155C102KAA SR-----C152KAA SR-----C222KAA SR-----C332KAA SR-----C472KAA SR-----C682KAA SR215C103KAA SR-----C153KAA SR-----C223KAA SR-----C333KAA SR-----C473KAA SR-----C683KAA SR215C104KAA SR-----C154KAA SR215C224KAA SR-----C334KAA SR-----C394KAA SR305C474KAA SR305C105KAA SR405C225KAA SR505C275KAA SR505C475KAA SR20 SR21 SR29 5.08 (.200) 5.08 (.200) 3.175 (.125) 2.54 (.100) .508 (.020) WVDC 200 100 50 SR59 5.08 (.200) 5.08 (.200) 3.175 (.125) 5.08 (.200) .508 (.020) WVDC 100 50 SR22 For other styles, voltages, tolerances and lead lengths see Part No. Codes or contact factory. *Other capacitance values available upon special request. = Industry preferred values = SR20 only NOTE: Capacitance Ranges available for SR12 SR62 SR64 SR89 same same same same as as as as SR15 SR21 SR30 SR21 16 SR27 N/A N/A 5.08 6.604 (.200) (.260) 5.08 6.35 (.200) (.250) 3.175 4.06 (.125) (.160) 6.35 7.62 (.250) (.300) .508 .508 (.020) (.020) WVDC WVDC 100 50 100 50 SR30 SR40 SR50 SR65 7.62 (.300) 7.62 (.300) 3.81 (.150) 5.08 (.200) .508 (.020) WVDC 200 100 50 SR75 10.16 (.400) 10.16 (.400) 3.81 (.150) 5.08 (.200) .508 (.020) WVDC 200 100 50 N/A 12.70 (.500) 12.70 (.500) 5.08 (.200) 10.16 (.400) .635 (.025) WVDC 200 100 50 Radial Leads/SkyCap(R) Z5U Dielectric SIZE AND CAPACITANCE SPECIFICATIONS EIA Characteristic Dimensions: Millimeters (Inches) AVX Style Cap. in.* pF 10,000 47,000 100,000 150,000 220,000 330,000 470,000 680,000 1.0 F 1.5 F 2.2 F 3.3 F 4.7 F AVX "Insertable" Width (W) Height (H) Thickness (T) Lead Spacing (L.S.) Lead Diameter (L.D.) Industry Preferred Values in Blue SR155E103ZAA SR-----E473ZAA SR215E104ZAA SR-----E154ZAA SR215E224ZAA SR215E334ZAA SR215E474ZAA SR-----E684ZAA SR-----105ZAA SR30E155ZAA SR30E225ZAA SR30E335ZAA SR30E475ZAA SR15 SR20 SR21 SR07 3.81 (.150) 3.81 (.150) 2.54 (.100) 2.54 (.100) .508 (.020) WVDC 100 50 SR29 5.08 (.200) 5.08 (.200) 3.175 (.125) 2.54 (.100) .508 (.020) WVDC 100 50 SR59 5.08 (.200) 5.08 (.200) 3.175 (.125) 5.08 (.200) .508 (.020) WVDC 100 50 SR22 N/A 5.08 (.200) 5.08 (.200) 3.175 (.125) 6.35 (.250) .508 (.020) WVDC 100 50 SR27 N/A 6.604 (.260) 6.35 (.250) 4.06 (.160) 7.62 (.300) .508 (.020) WVDC 100 50 SR30 SR65 7.62 (.300) 7.62 (.300) 3.81 (.150) 5.08 (.200) .508 (.020) WVDC 100 50 For other styles, voltages, tolerances and lead lengths see Part No. Codes or contact factory. *Other capacitance values available upon special request. = Industry preferred values = SR20 only AVX 500 VOLT SKYCAPS** MAXIMUM CAPACITANCE VALUE STYLE* SR29 SR20 SR28 SR59 SR13 SR21 SR30 SR61 SR65 SR40 SR75 SR22 SR27 SR76 SR50 C0G (NP0) 900 pF 1800 pF X7R .015 F .033 F 900 pF .015 F 1800 pF .033 F 7200 pF .12 F .015 F .27 F 1800 pF 1800 pF .015 F .036 F .033 F .033 F .27 F .59 F *Consult pages 18 and 19 for style sizes. **Voltage rating based on DWV of 150% of rated voltage. 17 SR40 SR50 SR75 10.16 (.400) 10.16 (.400) 3.81 (.150) 5.08 (.200) .508 (.020) WVDC 100 50 N/A 12.70 (.500) 12.70 (.500) 5.08 (.200) 10.16 (.400) .635 (.025) WVDC 100 50 SkyCap(R) Configurations by Lead Spacing LEAD SPACING .100 .030 Dimensions: Inches (Millimeters) SR07* SR14 SR15* SR20* (T=.100) (T=.100) (T=.100) (T=.125) .200 (5.08) Max. .150 (3.81) Max. .250 (6.35) Max. .050 (1.27) Clean Above Seating Plane Meniscus Free .031 (.787) Above Seating Plane 1.0 (25.4) Min. .300 (7.62) Max. .150 (3.81) Max. .200 (5.08) Max. 1.0 (25.4) Min. .060 (1.52) Max. .230 (5.84) .030 .100 (2.54) .030 .100 (2.54) .030 1.0 (25.4) Min. .060 (1.52) Max. .100 (2.54) .030 SR29* SR62* SR62-LP* (T=.125) (T=.100) (T=.100) .210 (5.33) Max. .200 (5.08) Max. .250 (6.35) Max. Meniscus Free .031 (.787) Above Seating Plane 0.04 (1.02) .271 (6.88) Max. a a 1.0 (25.4) Min. .100 (2.54) .030 .170 (4.32) Max. .358 (9.09) Max. 0.04 (1.02) 1.25 (31.7) Min. 1.25 (31.7) Min. .100 (2.54) .030 LEAD SPACING .200 (5.08) Max. .150 (3.81) Max. .100 (2.54) .030 a = .009 .002 .100 (2.54) .030 a = .009 .002 .200 .030 Dimensions: Inches (Millimeters) SR12* SR13* SR21* SR21-85* SR28* (T=.100) (T=.125) (T=.125) (T=.125) (T=.125) .200 (5.08) Max. .200 (5.08) Max. .150 (3.81) Max. .150 (3.81) Max. .200 (5.08) Max. .230 (5.84) Max. 1.0 (25.4) Min. Meniscus Free .031 (.787) Above Seating Plane .350 (8.89) Max. .200 (5.08) .030 .031 (.787) Clean Above Seat .200 (5.08) Max. .300 (7.62) Max. .300 (7.62) Max. Meniscus Free .031 (.787) Above Seating Plane 1.0 (25.4) Min. .200 (5.08) Max. .250 (6.35) Max. Meniscus Free .031 (.787) Above Seating Plane 1.0 (25.4) Min. 1.0 (25.4) Min. 1.0 (25.4) Min. .200 (5.08) .030 .200 (5.08) .030 .200 (5.08) .030 .200 (5.08) .030 SR30* SR30-LP* SR32* SR40* SR59* (T=.150) (T=.150) (T=.150) (T=.150) (T=.125) .300 (7.62) MAX. .300 (7.62) Max. .300 (7.62) Max. .225 (5.71) MAX. .300 (7.62) Max. 1.0 (25.4) Min. 1.0 (25.4) Min. .059 (1.5) Max. .060 (1.52) Max. .390 (9.91) Max. Meniscus Free .031 (.787) Above Seating Plane .200 (5.08) Max. .400 (10.16) Max. .400 (10.16) Max. .031 (.787) Clean Above Seat .300 (7.62) Max. 1.0 (25.4) Min. .200 (5.08) .030 .200 (5.08) .030 .200 (5.08) .030 1.0 (25.4) Min. 1.0 (25.4) Min. .060 (1.52) Max. .200 (5.08) .030 .200 (5.08) .030 SR61 SR63* SR64* SR64-LP* (T=.150) (T=.150) (T=.150) (T=.150) .300 (7.62) Max. .300 (7.62) Max. .200 (5.08) .030 .500 (12.7) Max. 0.04 (1.02) .137/.196 (3.48/4.98) .230 (5.84) .030 .200 (5.08) .030 .330 (8.38) Max. 0.04 (1.02) .300 (7.62) Max. .400 (10.16) Max. a a 1.0 (25.4) Min. (T=.150) .300 (7.62) Max. .268 (6.81) Max. .500 (12.7) Max. .500 (12.7) Max. Meniscus Free .031 (.787) Above Seating Plane .300 (7.62) Max. SR65* 1.25 (31.7) Min. .200 (5.08) .030 a = .009 .002 18 1.25 (31.7) Min. .200 (5.08) .030 a = .009 .002 1.0 (25.4) Min. .200 (5.08) .030 SkyCap(R) Configurations by Lead Spacing .200 .030 continued LEAD SPACING SR65-LP* (T=.150) .300 (7.62) MAX. Dimensions: Inches (Millimeters) SR67 SR75* SR89* (T=.125) (T=.150) Leads = #22 AWG (T=.125) .200 (5.08) Max. .215 (5.46) Max. .400 (10.16) Max. .300 (7.62) Max. Seated Height .031 (.787) Seated Plane .350 (8.89) MAX. COATING LIMIT .031 (.787) Min. Clean Lead Above Seat 1.0 (25.4) Min. 0.04 (1.02) .400 (10.16) Max. .230 (5.84) .030 1.25 (31.7) Min. .200 (5.08) .030 .200 (5.08) .030 .200 (5.08) .030 Meniscus Free .031 (7.87) Above Seating Plane LEAD SPACING .250 .030 a = .009 .002 1.0 (25.4) Min. .200 (5.08) .030 Dimensions: Inches (Millimeters) SR16 SR22 SR33 (T=.125) (T=.125) (T=.150) .200 (5.08) Max. Meniscus Free .031 (.787) Above Seating Plane .390 (9.91) Max. .200 (5.08) Max. .300 (7.62) Max. .400 (10.16) Max. .300 (7.62) Max. .230 (5.84) .030 1.0 (25.4) Min. .250 (6.35) .030 .260 (6.60) Max. a .480 (12.2) Max. .230 (5.84) .030 .250 (6.35) .030 .250 (6.35) .030 LEAD SPACING .300 .030 SR27 SR34 (T=.150) (T=.150) .260 (6.60) Max. .300 (7.62) Max. Meniscus Free .031 (.787) Above Seating Plane .250 (6.35) Max. 1.0 (25.4) Min. Meniscus Free .031 (.787) Above Seating Plane .350 (8.89) Max. 1.0 (25.4) Min. .300 (7.62) .030 .300 (7.62) .030 LEAD SPACING .375 .030 LEAD SPACING .400 .030 SR38 SR50 SR76 (T=.150) (T=.200) (T=.175) .500 (12.7) Max. .500 (12.7) Max. .300 (7.62) Max. Meniscus Free .031 (.787) Above Seating Plane .500 (12.7) Max. .425 (10.8) Max. 1.0 (25.4) Min. 1.0 (25.4) Min. .060 (1.52) Max. .440 (11.2) Max. .031 (.787) Min. Clean Lead Above Seat .375 (9.53) .030 Leads = #22 AWG 1. All leads are #24 AWG unless otherwise noted. 2. Available in tape and reel packaging(*). 3. Other styles are also available, contact factory. 4. (T = XXX) under type designation is maximum thickness in inches. 19 Seating Plane 1.0 (25.4) Min. .025 (0.64) .004 .400 (10.16) .030 .400 (10.16) .030 NOTES: .480 (12.2) Max. Radial Leads/Ceralam(R) GENERAL INFORMATION Dimensions: Millimeters (Inches) AVX MR Series 1.14 (.045) Max. Molded Radial Leaded MLC W L T 31.7 (1.25) Min. Temperature Coefficients: C0G (NP0), X7R, Z5U 50, 100, 200 Volts L.D. Case Material: Molded Epoxy L T 31.7 (1.25) Min. L.S. Lead Material: Solderable W Style MR05 L.D. L.S. Styles MR04, MR06, MR07, MR08 HOW TO ORDER AVX Styles: MR04, MR05, MR06, MR07, MR08 Part Number Example: MR05 AVX Style Voltage Dielectric Sig. Figures of Capacitance Multiplier (Additional no. of zeros) Capacitance Tolerance1 Failure Rate Leads 1 A 56 Part Number Codes Voltages: 50V = 5, 100V = 1, 200V = 2 1 J A A MARKING Marking is as size permits. (For code identification, see HOW TO ORDER section.) Dielectric: C0G (NP0) = A, X7R = C, Z5U = E -- AVX -- Capacitance Tolerance -- Voltage Rating -- Temperature Coefficient -- Date Code -- Lot Code Sig. Figures of Capacitance and Multiplier: First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 560 pF as 561. (For values below 10pF, use "R" in place of decimal point, e.g., 1R4 = 1.4 pF). Capacitance Tolerances: C0G (NP0): D = .5pF (<10 pF only), F = 1.0% (>50 pF only), G = 2.0% (>25 pF only), J = 5%, K = 10% X7R: J = 5%, K = 10%, M = 20% Z5U: M = 20%, Z = +80%, -20% PACKAGING REQUIREMENTS Bulk Packaging: 1000 pcs. per sealed package except MR07/MR08 (300 pcs.). Tape and Reel: Available on MR04, MR05, and MR06 only (2500 pcs./reel). Ammo Packaging: Available on special request. Failure Rate: Not Applicable Leads: A = Standard Solderable T1 = Trimmed Leads, .230" .030" Trimmed lead length for the MR05 style will be measured from the bend in the lead (seating plane). 1 20 Radial Leads/Ceralam(R) C0G (NP0) SIZE AND CAPACITANCE SPECIFICATIONS Dimensions: Millimeters (Inches) Cap. in pF 1.0 to 9.1 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 AVX Style Length* Width* Thickness* Lead Spacing* Lead Diameter* Typical AVX Part Nos. MR-----5A1R0DAA MR04 4.83 (.190") 4.83 (.190") 2.28 (.090") 2.54 (.100") .635 (.025") WVDC 200 100 50 MR05 4.83 (.190") 4.83 (.190") 2.28 (.090") 5.08 (.200") .635 (.025") WVDC 200 100 50 MR06 7.36 (.290") 7.36 (.290") 2.28 (.090") 5.08 (.200") .635 (.025") WVDC 200 100 50 MR07 12.44 (.490") 12.44 (.490") 3.55 (.140") 10.16 (.400") .635 (.025") WVDC 200 100 50 MR08 12.44 (.490") 12.44 (.490") 6.09 (.240") 10.16 (.400") .635 (.025") WVDC 200 100 50 MR-----5A9R1DAA MR-----5A100KAA MR-----5A120KAA MR-----5A150KAA MR-----5A180KAA MR-----5A220KAA MR-----5A270KAA MR-----5A330KAA MR-----5A390KAA MR-----5A470KAA MR-----5A560KAA MR-----5A680KAA MR-----5A820KAA MR-----5A101KAA MR-----5A121KAA MR-----5A151KAA MR-----5A181KAA MR-----5A221KAA MR-----5A271KAA MR-----5A331KAA MR-----5A391KAA MR-----5A471KAA MR-----5A561KAA MR-----5A681KAA MR-----5A821KAA MR-----5A102KAA MR-----5A122KAA MR-----5A152KAA MR-----5A182KAA MR-----5A222KAA MR-----5A272KAA MR-----5A332KAA MR-----5A392KAA MR-----5A472KAA MR-----5A562KAA MR-----5A682KAA MR-----5A822KAA MR-----5A103KAA MR-----5A123KAA MR-----5A153KAA MR-----5A183KAA MR-----5A223KAA MR-----5A273KAA MR-----5A333KAA MR-----5A393KAA MR-----5A473KAA MR-----5A563KAA MR-----5A683KAA MR-----5A823KAA MR-----5A104KAA MR-----5A124KAA MR-----5A154KAA For trimmed leads see "How To Order". For other tolerances see "How To Order". For other voltages see "How To Order". = Industry preferred values *Length, width and thickness dimensions are .254 mm (.010"). Lead diameter is .05 mm (.002"). Lead spacing is .381 mm (.015"). 21 Radial Leads/Ceralam(R) X7R SIZE AND CAPACITANCE SPECIFICATIONS Dimensions: Millimeters (Inches) Cap. in pF 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 820,000 1.0 F 1.2 F 1.5 F 1.8 F 2.0 F 2.2 F 2.7 F 3.3 F 3.9 F 4.7 F AVX Style Length* Width* Thickness* Lead Spacing* Lead Diameter* Typical AVX Part Nos. MR-----5C101KAA MR-----5C121KAA MR-----5C151KAA MR-----5C181KAA MR-----5C221KAA MR-----5C271KAA MR-----5C331KAA MR-----5C391KAA MR-----5C471KAA MR-----5C561KAA MR-----5C681KAA MR-----5C821KAA MR-----5C102KAA MR-----5C122KAA MR-----5C152KAA MR-----5C182KAA MR-----5C222KAA MR-----5C272KAA MR-----5C332KAA MR-----5C392KAA MR-----5C472KAA MR-----5C562KAA MR-----5C682KAA MR-----5C822KAA MR-----5C103KAA MR-----5C123KAA MR-----5C153KAA MR-----5C183KAA MR-----5C223KAA MR-----5C273KAA MR-----5C333KAA MR-----5C393KAA MR-----5C473KAA MR-----5C563KAA MR-----5C683KAA MR-----5C823KAA MR-----5C104KAA MR-----5C124KAA MR-----5C154KAA MR-----5C184KAA MR-----5C224KAA MR-----5C274KAA MR-----5C334KAA MR-----5C394KAA MR-----5C474KAA MR-----5C564KAA MR-----5C684KAA MR-----5C824KAA MR-----5C105KAA MR-----5C125KAA MR-----5C155KAA MR-----5C185KAA MR-----5C205KAA MR-----5C225KAA MR-----5C275KAA MR-----5C335KAA MR-----5C395KAA MR-----5C475KAA MR04 4.83 (.190") 4.83 (.190") 2.28 (.090") 2.54 (.100") .635 (.025") WVDC 200 100 50 MR05 4.83 (.190") 4.83 (.190") 2.28 (.090") 5.08 (.200") .635 (.025") WVDC 200 100 50 For trimmed leads see "How To Order". For other tolerances see "How To Order". For other voltages see "How To Order". MR06 7.36 (.290") 7.36 (.290") 2.28 (.090") 5.08 (.200") .635 (.025") WVDC 200 100 50 MR07 12.44 (.490") 12.44 (.490") 3.55 (.140") 10.16 (.400") .635 (.025") WVDC 200 100 50 = Industry preferred values *Length, width and thickness dimensions are .254 mm (.010"). Lead diameter is .05 mm (.002"). Lead spacing is .381 mm (.015"). 22 MR08 12.44 (.490") 12.44 (.490") 6.09 (.240") 10.16 (.400") .635 (.025") WVDC 200 100 50 Radial Leads/Ceralam(R) Z5U Dielectric SIZE AND CAPACITANCE SPECIFICATIONS Dimensions: Millimeters (Inches) AVX Style MR04 4.83 (.190") 4.83 (.190") 2.28 (.090") 2.54 (.100") .635 (.025") WVDC Length* Width* Thickness* Cap. in pF Lead* Spacing Lead* Diameter Typical AVX Part Nos. 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 820,000 1.0 F 1.2 F 1.5 F 1.8 F 2.2 F 2.7 F 3.3 F 3.9 F 4.7 F 5.6 F 6.8 F 8.2 F 10.0 F MR-----5E103ZAA MR-----5E123ZAA MR-----5E153ZAA MR-----5E183ZAA MR-----5E223ZAA MR-----5E273ZAA MR-----5E333ZAA MR-----5E393ZAA MR-----5E473ZAA MR-----5E563ZAA MR-----5E683ZAA MR-----5E823ZAA MR-----5E104ZAA MR-----5E124ZAA MR-----5E154ZAA MR-----5E184ZAA MR-----5E224ZAA MR-----5E274ZAA MR-----5E334ZAA MR-----5E394ZAA MR-----5E474ZAA MR-----5E564ZAA MR-----5E684ZAA MR-----5E824ZAA MR-----5E105ZAA MR-----5E125ZAA MR-----5E155ZAA MR-----5E185ZAA MR-----5E225ZAA MR-----5E275ZAA MR-----5E335ZAA MR-----5E395ZAA MR-----5E475ZAA MR-----5E565ZAA MR-----5E685ZAA MR-----5E825ZAA MR-----5E106ZAA 100 MR05 4.83 (.190") 4.83 (.190") 2.28 (.090") 5.08 (.200") .635 (.025") WVDC 50 100 MR06 7.36 (.290") 7.36 (.290") 2.28 (.090") 5.08 (.200") .635 (.025") WVDC 50 For trimmed leads see "How To Order". For other tolerances see "How To Order". For other voltages see "How To Order". 100 MR07 12.44 (.490") 12.44 (.490") 3.55 (.140") 10.16 (.400") .635 (.025") WVDC 50 100 MR08 12.44 (.490") 12.44 (.490") 6.09 (.240") 10.16 (.400") .635 (.025") WVDC 50 50 = Industry preferred values *Length, width and thickness dimensions are .254 mm (.010"). Lead diameter is .05 mm (.002"). Lead spacing is .381 mm (.015). 23 100 Radial Leads/Packaging Tape and Reel The Insertables GENERAL INFORMATION STANDARD 1 1. Standard reel diameter is 355 millimeters (14 inches) maximum. 2. Reeling standard (#1 or #2) should be specified when ordering. 32 mm max. HOW TO ORDER 16 0.5 mm To specify tape and reel packaging, add TR1, TR2 or TRX to the end of the AVX 12 digit part number. SR07 SR29 SR59 SR65 SR75 SR59 SR65 SR75 STANDARD 2 Examples: SR215C104KAATR1 SR305E105MAATR2 SR215C103JAATRX 32 mm max. 19 mm min. SR07 SR29 STANDARD 1 Dimensions in Millimeters 32 max. 32 max. 20 +1.5 -1.0 16 .5 SR28 SR29 SR12 SR21 SR13 SR32 16 min. SR32 (TRX) SR21 (TRX) MR05 SR63 (TRX) SR15 SR20 MR06 SR30 SR40 STANDARD 2 Dimensions in Millimeters 32 max. 32 max. 19 min. 19 min. SR29 SR28 SR12 SR21 SR13 SR32 SR15 SR20 MR05 S T S K E MR06 SR30 SR40 DESCRIPTION DIMENSIONS (MM) A. Feed Hole Pitch B. Feed Hole Diameter C. Feed Hole Location 12.70 .20 3.99 .20 9.02 .51 D. Component Lead Spacing +.79 5.00+.79 -.20 or 2.54 -.20 E. Component Lead Location 3.81 .51 or 5.00 .51 for 2.54 lead spacing 2.00 maximum F. Component Lead Protrusion (edge of carrier to cut end of lead) K. Component Body Location D Q R L. Carrier Tape Width F M. Carrier Tape Assembly Thickness N. Carrier Tape Spliced Thickness O. Carrier Tape Spliced Length Q. Adhesive Tape Border R. Component Bent Leads (either direction) S. Component Misalignment T. Component Pitch W. Adhesive Tape Width X. Carrier Tape Thickness Y. Cumulative Pitch over 20 Pitches C L W A B O N M X 24 6.35 .41 18.01 +1.02 -.51 .71 .20 1.42 maximum 50.80 - 88.90 3.00 maximum .79 maximum .99 maximum 12.70 .99 5.00 minimum .51 .10 254 2.00 Radial Leads/Packaging REEL DIRECTION QUANTITY PER REEL Leads on top of carrier strip, body away Unreel from LEFT to RIGHT OVER TOP of reel PART PCS SR15, 07, 12 3500 SR20, 21, 23, 28 13, 29, 59, 62, 89 3000 SR30, 32, 40, 63, 64 65, 75 2000 MR05, 06 2500 G DESCRIPTION A - Reel Diameter B - Reel Outside Width C - Reel Inside Width D - Core Diameter (O.D.) E - Hub Recess Diameter F - Hub Recess Depth G - Arbor Hole Diameter A F DIMENSIONS (MM) 304.80 - 355 50.80 maximum 38.10 - 46.02 102.01 maximum 86.36 maximum 9.50 minimum 25.40 - 30.48 D C B E CONVERSION TABLE MM .10 .20 .38 .41 .51 .71 .79 .99 1.02 1.42 IN .004 .007 .015 .016 .020 .028 .031 .039 .040 .056 MM 1.52 2.00 2.54 3.00 3.18 3.48 3.81 3.99 4.45 4.98 IN MM IN MM .060 .079 .100 .118 .125 .137 .150 .157 .175 .196 5.00 5.08 6.22 6.35 6.60 6.99 7.62 8.89 9.02 9.50 .197 .200 .245 .250 .260 .275 .300 .350 .355 .374 9.91 10.03 10.16 11.68 12.50 12.70 16.00 18.01 25.40 30.48 25 IN .390 .395 .400 .460 .492 .500 .630 .709 1.000 1.200 MM 32.00 38.10 46.02 50.80 86.36 88.90 102.01 254.00 304.80 355.00 IN 1.260 1.500 1.812 2.000 3.400 3.500 4.016 10.000 12.000 14.000 Two Pin DIP/DIPGuard(R) GENERAL INFORMATION AVX MD Series Temperature Coefficients: C0G (NP0), X7R, Z5U, Y5V 50, 100 Volts For established reliability DIPGuards see MIL-C-39014 section on pages 47 to 52. T MAX. L H1 MAX. SEE NOTE 1 SEE NOTE 2 .012 .004 .400 max. .148 .028 .015 MIN. .325 .035 H2 MAX. .019 .004 .0575 .0125 60 TYP. 20 HOW TO ORDER AVX Styles: MD01, CKR22*, CKS22**, MD02, CKR23*, CKS23**, MD03, CKR24*, CKS24** Note 1 = Leads centered within .010" Note 2 = Angle shall be 95, +10, -5 .019 .004 .010 MAX. Part Number Example MD01 5 E 10 4 M A B AVX Style Voltage Temperature Coefficient Sig. Figures of Capacitance Multiplier (Additional no. of zeros) Capacitance Tolerance Failure Rate Not Applicable Assembly Method Part Number Codes Voltages: 16V = Y, 50V = 5, 100V = 1 Temp. Coefficient: C0G (NP0) = A, X7R = C, PACKAGING REQUIREMENTS Z5U = E, Y5V = G Standard Packaging: 200 pieces per slide pack. Sig. Figures Capacitance and Multiplier: First two digits are the significant figures of capacitance. .005 .002 .025 Third digit indicates the additional number of zeros. For .123 DIA. THRU 2 HOLES W example, order 100,000 pF as 104. Capacitance Tolerances: HI H C0G (NP0): F = 1%, J = 5%, K= 10% H X7R: J = 5%, K = 10%, M = 20% Z5U: M = 20%, Z = +80%, -20% W L W Y5V: M = 20%, Z = +80%, -20% See Table W Failure Rate: A = Not Applicable Assembly Method: A = Hand Assembled, B = Automated Assembly Slide Package Dimensions * Reference pages 47 to 52. MD01 MD02 ** Reference page 67. T O C C I O MARKING (H ) Overall Height (H ) Channel Height (H ) Inside Height (W ) Overall Width (W ) Inside Width (W ) Channel Width (W ) Top Width (L) Length O C Part Number Example MD015 E 104MAB A 5 I Top of Unit: E 104 O M I Tolerance Code AVX Voltage Y, 1, or 5 Dielectric A = C0G (NP0) C = X7R E = Z5U G = Y5V 3 Digit Code For Capacitance C T 26 MD03 .400 ref. .430 ref. .545 ref. .141 .006 .171 .006 .295 .010 .350 .380 .495 .540 ref. .540 ref. .600 ref. .490 .490 .550 .210 .210 .170 .350 .310 .300 20.073 .06 20.073 .06 20.073 .06 Two Pin DIP/DIPGuard(R) SIZE SPECIFICATIONS AVX Style Dimensions: Millimeters (Inches) Length (L) 6.60 (.260 .020) 6.60 (.260 .020) 6.60 (.260 .020) MD01 MD02 MD03 Height (H1) 3.43 (.135 max.) 4.19 (.162 max.) 7.37 (.290 max.) Height (H2) 4.19 (.165 max.) 5.08 (.195 max.) 8.13 (.320 max.) Thickness 2.54 (.098 max.) 2.54 (.098 max.) 2.54 (.098 max.) MILITARY CROSS REFERENCE GUIDE Note: For CKR22/23/24, see MIL-C-39014 section in the Military Section pages 47 thru 52. AVX Style MIL-C-39014 MD01 CKR22 MD02 CKR23 MD03 CKR24 Length (L) 6.60 (.260 .020) 6.60 (.260 .020) 6.60 (.260 .020) Dimensions: Millimeters (Inches) Height (H1) 3.43 (.135 max.) 4.19 (.162 max.) 7.37 (.290 max.) Height (H2) 4.19 (.165 max.) 5.08 (.195 max.) 8.13 (.320 max.) Thickness 2.54 (.092 .006) 2.54 (.092 .006) 2.54 (.092 .006) CAPACITANCE SPECIFICATIONS C0G (NP0) EIA Characteristic AVX Style Cap. in pF* 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 Cap. in pF* 4700 6800 10000 MD015A100KAB MD015A150KAB MD015A220KAB MD015A330KAB MD015A470KAB MD015A680KAB MD015A101KAB MD015A151KAB MD015A221KAB MD015A331KAB MD015A471KAB MD015A681KAB MD015A102KAB MD015A152KAB MD015A222KAB MD015A332KAB AVX Style X7R C0G (NP0) MD01 WVDC 100 50 MD02 WVDC 100 50 MD025A472KAB MD025A682KAB MD025A103KAB EIA Characteristic AVX Style Cap. in pF* 220 330 470 680 1000 1500 2200 3300 4700 6800 10,000 15,000 22,000 33,000 47,000 68,000 100,000 Cap. in pF* 150,000 220,000 For other voltages and tolerances see Part No. Codes. Cap. in pF* 330,000 470,000 680,000 1,000,000 MD015C221KAB MD015C331KAB MD015C471KAB MD015C681KAB MD015C102KAB MD015C152KAB MD015C222KAB MD015C332KAB MD015C472KAB MD015C682KAB MD011C103KAB MD015C153KAB MD015C223KAB MD015C333KAB MD015C473KAB MD015C683KAB MD015C104KAB AVX Style MD025C154KAB MD025C224KAB AVX Style Z5U X7R MD01 WVDC 100 50 EIA Characteristic AVX Style Cap. in pF* 10,000 15,000 22,000 33,000 47,000 68,000 100,000 150,000 220,000 330,000 Cap. in pF* 470,000 MD02 WVDC 100 50 Cap. in pF* 680,000 1,000,000 For other voltages and tolerances see Part No. Codes. MD025E474ZAB AVX Style MD02 WVDC 100 50 MD03 WVDC 100 50 MD035E684ZAA MD035E105ZAA Y5V MD03 WVDC 100 50 MD035C334KAA MD035C474KAA MD035C684KAA MD035C105KAA MD015E103ZAB MD015E153ZAB MD015E223ZAB MD015E333ZAB MD015E473ZAB MD015E683ZAB MD015E104ZAB MD015E154ZAB MD015E224ZAB MD015E334ZAB AVX Style Z5U MD01 WVDC 100 50 EIA Characteristic AVX Style Cap. in pF* 1,000,000 2,200,000 3,300,000 Cap. in pF* 1,000,000 MD01YG105ZAB MD01YG225ZAB MD01YG335ZAB AVX Style Y5V MD01 WVDC 16 MD02 WVDC 100 50 MD025G105ZAB For other voltages and tolerances see Part No. Codes. *Other capacitance values available upon special request. = Industry preferred values 27 Axial Leads/SpinGuard(R) GENERAL DESCRIPTION L.D. AVX SA Series Conformally Coated Axial Leaded MLC Temperature Coefficients: C0G (NP0), X7R , Z5U 50, 100, 200 Volts Case Material: Epoxy (Flame Retardant to UL Bulletin 492, Par. 280) Lead Material: Solderable D Max. L Max. HOW TO ORDER AVX Styles: SA05, SA10, SA11, SA20, SA30, SA40 Lead Length Min. Part Number Example SA10 5 E 10 4 Z A A Conformal Axial Size Voltage Dielectric Sig. Figures of Capacitance Multiplier (Additional no. of zeros) Capacitance Tolerance Failure Rate Packaging/Leads Part Number Codes Voltages: 50V = 5, 100V = 1, 200V = 2 Dielectric: C0G (NP0) = A, X7R = C, Z5U = E Capacitance Tolerances: C0G (NP0): C = 0.25 pF, D = .5 pF, F = 1%, G = 2%, J = 5%, K = 10% X7R: J = 5%, K = 10%, M = 20% Z5U: M = 20%, Z = +80%, -20% Sig. Figures of Capacitance and Multiplier: First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. (For values below 10 pF, use "R" in place of decimal point, e.g., 1R4 = 1.4 pF). Failure Rate: Not Applicable Leads: Standard (Solderable) MARKING (Example) SA10, 11, 20, 30, 40 SpinGuard marking includes full date code/lot code identification. A first in the industry, this format provides complete traceability to all manufacturing processes involving the basic chip and final assembly. Total Shipment traceability is also provided. SA105E104ZAA LOT CODE/DATE CODE =910AB VOLTAGE (5 = 50V) SA05 SA055E104ZAA LOT CODE/DATE CODE =9AB TOLERANCE (Z = +80%, -20%) AVX A CAP CODE AND MULTIPLIER TC (E = Z5U) AVX Z 1 0 4 9 A B TOLERANCE (Z = +80, -20%) LOT CODE YEAR (1999) A 5 E 1 0 4 Z A B 9 1 0 YEAR (1999) CAP CODE AND MULTIPLIER ALPHA-ALPHA, LOT CODE AB=LOT #2 IN WEEK WEEK (10th) PACKAGING REQUIREMENTS L = Twin Coat Leads (95/5 Flash Tin/Lead) M = 26mm tape and reel N = 26mm ammo pack A = Standard Reels (see Page 38) B = 1000 piece reels (distributors only, tight tolerance only) C = Ammo Pack (see Page 38) D thru J = See Special Lead Configurations (Page 32) 28 Axial Leads/SpinGuard(R) C0G (NP0) Dielectric SIZE AND CAPACITANCE SPECIFICATIONS Dimensions: Millimeters (Inches) AVX Style Length (L) Diameter (D) Lead Diameter Lead Length Typical AVX Part Nos. Cap. in pF 1.0* + 9.1* 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10,000 12,000 SA05 3.00 (.118") 2.30 (.090") .407 (.016") 25.4 (1.00") WVDC 200 100 SA10 4.32 (.170") 2.54 (.100") .483 (.019") 25.4 (1.00") WVDC 200 100 50 SA11 4.32 (.170") 3.05 (.120") .483 (.019") 25.4 (1.00") WVDC 100 50 SA102A1R0DAA + SA102A9R1DAA SA102A100JAA SA102A120JAA SA102A150JAA SA102A180JAA SA102A220JAA SA102A270JAA SA102A330JAA SA102A390JAA SA102A470JAA SA102A560JAA SA102A680JAA SA102A820JAA SA102A101JAA SA102A121JAA SA101A151JAA SA101A181JAA SA101A221JAA SA101A271JAA SA101A331JAA SA101A391JAA SA101A471JAA SA101A561JAA SA101A681JAA SA101A821JAA SA105A102JAA SA201A122JAA SA201A152JAA SA205A182JAA SA301A222JAA SA301A272JAA SA301A332JAA SA301A392JAA SA305A472JAA SA401A562JAA SA401A682JAA SA405A822JAA SA405A103JAA SA405A123JAA For other tolerances see Part No. Codes For other voltages see Part No. Codes AVX Style = Industry preferred values *"C&D" Tolerance Only 29 SA20 6.60 (.260") 2.54 (.100") .483 (.019") 25.4 (1.00") WVDC 100 50 SA30 7.37 (.290") 3.81 (.150") .483 (.019") 25.4 (1.00") WVDC 100 50 SA40 10.16 (.400") 3.81 (.150") .483 (.019") 25.4 (1.00") WVDC 100 50 Axial Leads/SpinGuard(R) X7R Dielectric SIZE AND CAPACITANCE SPECIFICATIONS Dimensions: Millimeters (Inches) Cap. in pF AVX Style Length (L) Diameter (D) Lead Diameter Lead Length Typical AVX Part Nos. 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 470,000 SA102C221KAA SA102C271KAA SA102C331KAA SA102C391KAA SA102C471KAA SA101C561KAA SA101C681KAA SA101C821KAA SA101C102KAA SA101C122KAA SA101C152KAA SA101C182KAA SA101C222KAA SA101C272KAA SA101C332KAA SA101C392KAA SA101C472KAA SA101C562KAA SA101C682KAA SA105C822KAA SA105C103KAA SA105C123KAA SA105C153KAA SA105C183KAA SA105C223KAA SA105C273KAA SA105C333KAA SA105C393KAA SA105C473KAA SA115C563KAA SA115C683KAA SA115C823KAA SA115C104KAA SA305C124KAA SA305C154KAA SA305C184KAA SA305C224KAA SA305C274KAA SA305C334KAA SA405C474KAA SA05 3.00 (.118") 2.30 (.090") .407 (.016") 25.4 (1.00") WVDC 200 100 50 SA10 4.32 (.170") 2.54 (.100") .483 (.019") 25.4 (1.00") WVDC 200 100 50 SA11 4.32 (.170") 3.05 (.120") .483 (.019") 25.4 (1.00") WVDC 100 For other tolerances see Part No. Codes For other voltages see Part No. Codes AVX Style = Industry preferred values 30 SA20 6.60 (.260") 2.54 (.100") .483 (.019") 25.4 (1.00") WVDC 50 100 50 SA30 7.37 (.290") 3.81 (.150") .483 (.019") 25.4 (1.00") WVDC 100 50 SA40 10.16 (.400") 3.81 (.150") .483 (.019") 25.4 (1.00") WVDC 100 50 Axial Leads/SpinGuard(R) Z5U Dielectric SIZE AND CAPACITANCE SPECIFICATIONS Dimensions: Millimeters (Inches) Cap. in pF AVX Style Length (L) Diameter (D) Lead Diameter Lead Length Typical AVX Part Nos. 10,000 15,000 22,000 33,000 47,000 68,000 *100,000 150,000 220,000 330,000 470,000 680,000 820,000 1,000,000 SA105E103ZAA SA105E153ZAA SA105E223ZAA SA105E333ZAA SA105E473ZAA SA105E683ZAA SA105E104ZAA SA105E154ZAA SA105E224ZAA SA115E334ZAA SA305E474ZAA SA305E684ZAA SA305E824ZAA SA305E105ZAA SA05 3.00 (.118") 2.30 (.090") .407 (.016") 25.4 (1.00") WVDC 50 SA10 4.32 (.170") 2.54 (.100") .483 (.019") 25.4 (1.00") WVDC 100 50 SA11 4.32 (.170") 3.05 (.120") .483 (.019") 25.4 (1.00") WVDC 100 50 For other tolerances see Part No. Codes For other voltages see Part No. Codes AVX Style = Industry preferred values *Preferred Industry Decoupling Capacitor -- Insertable on .300" centers. SA105E104ZAA 31 SA20 6.60 (.260") 2.54 (.100") .483 (.019") 25.4 (1.00") WVDC 100 50 SA30 7.37 (.290") 3.81 (.150") .483 (.019") 25.4 (1.00") WVDC 100 50 SA40 10.16 (.400") 3.81 (.150") .483 (.019") 25.4 (1.00") WVDC 100 50 Axial Leads/SpinGuard(R) Extended Range SpinGuards GENERAL SPECIFICATIONS Capacitance Range 220,000 pF, 330,000 pF, 1,000,000 pF Capacitance Tolerances 20%, [+80 -20]% Dimensions: Millimeters (Inches) Operating Temperature Range Z5U = +10C to +85C 0.483 .05 (.019" .002") D Max. Temperature Characteristics E = Z5U Voltage Ratings 50 Vdc Dissipation Factor 25C Z5U = 4.0% max. at 1 KHz, .3 VRMS L Max. Insulation Resistance 25C (MIL-STD-202-Method 302) Z5U = 10 K megohms or 100 megohms - F minimum, whichever is less 25.4 (1.0") Min. Lead Length Dielectric Strength Z5U = 200% of rated voltage Moisture Resistance (MIL-STD-202-Method 106) Immersion Cycling (MIL-STD-202-Method 104, condition B) For current reliability information, consult factory. SIZE AND CAPACITANCE SPECIFICATIONS Dimensions: Millimeters (Inches) Parameter AVX Style Length (L) Diameter (D) 0.22 F 0.33 F 1.0 F * ** ELECTRICAL PERFORMANCE CHARACTERISTICS AT TYPICAL 256K DRAM OPERATING CONDITIONS SA11* 4.32 (.170") 3.05 (.120") SA30 7.37 (.290") 3.81 (.150") VL Inductance, L dv/dt Test Conditions Mi. Typ. Max. Unit di/dt = 200 ma/10 ns 20 ns after pulse di/dt = 200 ma/10 ns Capacitance, C ESR Resonance Freq., 4-5 MHz Impedance (Total) 100 MHz (HP- 4192A) Recovery Time, t R SA115E224ZAA **SA115E334ZAA SA305E105ZAA -- 80 -- 4.0 90 4.5 -- .24 -- -- -- -- mv/ns -- F .08 5.0 -- ns 0.53 .33 .03 4.4 20 Automatically insertable on 0.300" centers (see page 38 for reel packing details) RAMGuard: the 0.33 F value capacitance is recommended for decoupling 256K and 1 Meg Dynamic RAMs. Special Lead Configurations Dimensions -- Body dimensions Per Standard SpinGuard Configurations. Formed dimensions as shown for types D, E, F, G, H, I, & J configurations. Radial Axial D E F G = .300" L.S. I = .500" L.S. Single Crimp Dual Crimp No Crimp H = .400" L.S. J = .600" L.S. Formed Dimensions: LEAD SPACING* SA10 SA20 SA30 SA40 Nom. .2" .2" .2" .2" SEATED HEIGHT (Max.) D&E .525" .570" .580" .650" F .300" .375" .425" .460" *Lead spacing can be varied by user to cover .1"-.3" spacing requirements for F, D, and E styles. 32 G, H, I & J .100" .100" .150" .150" mv nh Axial Leads/Mini-Ceramic Capacitor(R) GENERAL DESCRIPTION AVX's new mini-ceramic capacitor (MC02) is only 0.040" thick by 0.050" wide by 0.100" long, the same size as AVX's MINITAN (TMH Series) "W" case size. This allows the lower value ceramic multilayer capacitors to fit into the same designs as the AVX tantalum capacitor's "W" size. It uses the same solder coated pure nickel lead wire suitable for either soldering or welding. MC01 1.1 (0.040) Max. MC02 1.3 (0.050) Max. MC03 1.1 (0.040) Max. 1.3 (0.050) Max. .18 .035 (.007 .001) 1.3 (0.050) Max. 1.9 (0.075) Max. .18 .035 (.007 .001) MC04 1.0 (0.040) Max. 1.0 (0.040) Max. .18 .035 (.007 .001) 2.5 (0.100) Max. 2.5 (0.100) Max. 0.825 (0.030) Dimensions: mm (inch) 1.9 (0.075) Max. 2.9 (0.115) Max. HOW TO ORDER AVX Style: MC02 Part Number Example MC02 Y C 222 K A A Style Voltage Temperature Characteristic Sig. Figures of Cap. & Mult. Capacitance Tolerance Code Failure Rate Packaging Std. Part Number Codes Voltages: 6.3V = 6, 16V = Y, 10V = Z Dielectric: X7R = C, Y5V = G Sig. Figures of Capacitance and Multiplier: First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. (For values below 10 pF, use "R" in place of decimal point, e.g., 1R4 = 1.4 pF.) Capacitance Tolerances: X7R: J = 5%, K = 10%, M = 20% Failure Rate: Not Applicable Packaging Standard: 100 pieces per bag Capacitance Specifications Cap. in pF Typical AVX Part Nos. 1000 1500 2200 3300 4700 5600 6800 8200 10,000 15,000 22,000 33,000 47,000 68,000 100,000 MC01 MC01YC102KAR MC01YC152KAR MC01YC222KAR MC01YC332KAR MC01YC472KAR MC01YC562KAR MC01YC682KAR MC01YC822KAR MC01YC103KAR MC01YC153KAR MC01YC223KAR MC016C333KAR MC016C473KAR MC016C683KAR MC016C104KAR MARKING Three digit Capacitance Code Color coded Capacitance Tolerance: 5% = Gold Dot 10% = Silver Dot 33 Cap. in pF Typical AVX Part Nos. 1000 1500 2200 3300 4700 5600 6800 8200 10,000 15,000 22,000 33,000 47,000 68,000 100,000 150,000 220,000 470,000 1,000,000 MC02 MC02YC102KAA MC02YC152KAA MC02YC222KAA MC02YC332KAA MC02YC472KAA MC02YC562KAA MC02YC682KAA MC02YC822KAA MC02YC103KAA MC02YC153KAA MC02YC223KAA MC02YC333KAA MC02YC473KAA MC02YC683KAA MC02YC104KAA MC026C154KAA MC026C224KAA MC026C474KAA MC026C105KAA Cap. in pF Typical AVX Part Nos. MC03 F X7R F Y5V .33 MC03ZC334KAA 2.2 MC03ZG225ZAA .47 MC03ZC474KAA 1.0 MC03ZC105KAA 1.0 MC03YC105KAA Cap. in pF 1000 1500 2200 3300 4700 5600 6800 8200 10,000 15,000 22,000 33,000 47,000 68,000 100,000 Typical AVX Part Nos. MC04 MC04YC102KAA MC04YC152KAA MC04YC222KAA MC04YC332KAA MC04YC472KAA MC04YC562KAA MC04YC682KAA MC04YC822KAA MC04YC103KAA MC04YC153KAA MC04YC223KAA MC046C333KAA MC046C473KAA MC046C683KAA MC046C104KAA Axial Leads/Ceralam(R) GENERAL DESCRIPTION AVX MA Series Molded Axial Leaded MLC Temperature Coefficient: C0G (NP0), X7R, Z5U 50V, 100V and 200V Case Material: Molded Epoxy Lead Material: Solderable L LD D Lead Length Min. HOW TO ORDER AVX Styles: MA10, MA20, MA30, MA40, MA50, MA60 Part Number Example MA10 5 E 10 4 Z A A Molded Axial Size Voltage Dielectric Sig. Figures of Capacitance Multiplier (Additional no. of zeros) Capacitance Tolerance Failure Rate Leads Part Number Codes Voltages: 50V = 5, 100V = 1, 200V = 2 Dielectric: C0G (NP0) = A, X7R = C, Z5U = E Sig. Figures of Capacitance and Multiplier: First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. (For values below 10 pF, use "R" in place of decimal point, e.g., 1R4 = 1.4 pF). Capacitance Tolerances: C0G (NP0): F = 1.0%, J = 5%, K = 10%, M = 20%, D = .5pF <10 pF only X7R: J = 5%, K = 10%, M = 20% Z5U: M = 20%, Z = +80%, -20% Failure Rate: Not Applicable Leads: Standard MARKING (Example) Line 1, A (for AVX), 5 = 50 Volts (V is optional), E = TC Line 2, 104Z = Capacitance Code Line 3, Tolerance, 2 digit Lot Code Date Code: 9 = 1999 10 = Week Four Digit Date Code Optional A5E 104 ZAA 910 C tolerance available C0G (NP0) from 1.0 to 9.1 pF only. Minimum tolerance for values 10 pF - 100 pF is D or F whichever is greater. MILITARY CROSS REFERENCE AND DIMENSIONS GUIDE Per MIL-Spec Case Size AVX Style MIL-C-11015 MIL-C-39014 MIL-C-20 MA10 CK12 CKR11 CCR75/CC75 MA20 CK13 CKR12 CCR76/CC76 MA40 CK14 CKR14 CCR77/CC77 MA50 CK15 CKR15 CCR78/CC78 MA60 CK16 CKR16 CCR79/CC79 Length (L) Diameter (D) Lead Diameter (LD) 4.07 .25 (.160" .010") 6.35 .25 (.250" .010") 9.91 .25 (.390" .010") 12.7 .51 (.500" .020") 17.53 .51 (.690" .020") 2.29 .25 (.090" .010") 2.29 .25 (.090" .010") 3.56 .25 (.140" .010") 6.35 .38 (.250" .015") 8.89 .51 (.350" .015") .48 .05 (.019" .002") .48 .05 (.019" .002") .63 .05 (.025" .002") .63 .05 (.025" .002") .63 .05 (.025" .002") For Military/Established Reliability Molded/Axial Lead see MIL-C-11015, MIL-C-39014, MIL-C-20 Section. 34 Dimensions: Millimeters (Inches) Axial Leads/Ceralam(R) C0G (NP0) Dielectric SIZE AND CAPACITANCE SPECIFICATIONS Dimensions: Millimeters (Inches) AVX Style Length Diameter Cap. in pF 1.0 to 9.1 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 Lead Diameter Lead Length Typical AVX Part Nos. MA-----5A1R0DAA MA10 4.07 .25 (.160" .010") 2.29 .25 (.090" .010") .48 .05 (.019" .002") 25.4 (1.00") WVDC 200 100 50 MA20 6.35 .25 (.250" .010") 2.29 .25 (.090" .010") .48 .05 (.019" .002") 25.4 (1.00") WVDC 200 100 50 MA30 6.09 .25 (.240" .010") 3.30 .25 (.130" .010") .48 .05 (.019" .002") 25.4 (1.00") WVDC 200 100 50 MA-----5A9R1DAA MA-----5A100KAA MA-----5A120KAA MA-----5A150KAA MA-----5A180KAA MA-----5A220KAA MA-----5A270KAA MA-----5A330KAA MA-----5A390KAA MA-----5A470KAA MA-----5A560KAA MA-----5A680KAA MA-----5A820KAA MA-----5A101KAA MA-----5A121KAA MA-----5A151KAA MA-----5A181KAA MA-----5A221KAA MA-----5A271KAA MA-----5A331KAA MA-----5A391KAA MA-----5A471KAA MA-----5A561KAA MA-----5A681KAA MA-----5A821KAA MA-----5A102KAA MA-----5A122KAA MA-----5A152KAA MA-----5A182KAA MA-----5A222KAA MA-----5A272KAA MA-----5A332KAA MA-----5A392KAA MA-----5A472KAA MA-----5A562KAA MA-----5A682KAA MA-----5A822KAA MA-----5A103KAA MA-----5A123KAA MA-----5A153KAA MA-----5A183KAA MA-----5A223KAA MA-----5A273KAA MA-----5A333KAA MA-----5A393KAA MA-----5A473KAA MA-----5A563KAA MA-----5A683KAA MA-----5A823KAA MA-----5A104KAA MA-----5A124KAA MA-----5A154KAA For other tolerances see Part No. Codes For other voltages see Part No. Codes. AVX Style 35 MA40 9.91 .25 (.390" .010") 3.56 .25 (.140" .010") .63 .05 (.025" .002") 25.4 (1.00") WVDC 200 100 50 MA50 12.7 .51 (.500" .020") 6.35 .38 (.250" .015") .63 .05 (.025" .002") 25.4 (1.00") WVDC 200 100 50 MA60 17.53 .51 (.690" .020") 8.89 .51 (.350" .015") .63 .05 (.025" .002") 25.4 (1.00") WVDC 200 100 50 Axial Leads/Ceralam(R) X7R Dielectric SIZE AND CAPACITANCE SPECIFICATIONS Dimensions: Millimeters (Inches) AVX Style Length Diameter Cap. in pF 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 820,000 1.0 F 1.2 F 1.5 F 1.8 F 2.2 F 2.7 F 3.3 F 3.9 F Lead Diameter Lead Length Typical AVX Part Nos. MA-----5C221KAA MA-----5C271KAA MA-----5C331KAA MA-----5C391KAA MA-----5C471KAA MA-----5C561KAA MA-----5C681KAA MA-----5C821KAA MA-----5C102KAA MA-----5C122KAA MA-----5C152KAA MA-----5C182KAA MA-----5C222KAA MA-----5C272KAA MA-----5C332KAA MA-----5C392KAA MA-----5C472KAA MA-----5C562KAA MA-----5C682KAA MA-----5C822KAA MA-----5C103KAA MA-----5C123KAA MA-----5C153KAA MA-----5C183KAA MA-----5C223KAA MA-----5C273KAA MA-----5C333KAA MA-----5C393KAA MA-----5C473KAA MA-----5C563KAA MA-----5C683KAA MA-----5C823KAA MA-----5C104KAA MA-----5C124KAA MA-----5C154KAA MA-----5C184KAA MA-----5C224KAA MA-----5C274KAA MA-----5C334KAA MA-----5C394KAA MA-----5C474KAA MA-----5C564KAA MA-----5C684KAA MA-----5C824KAA MA-----5C105KAA MA-----5C125KAA MA-----5C155KAA MA-----5C185KAA MA-----5C225KAA MA-----5C275KAA MA-----5C335KAA MA-----5C395KAA MA10 4.07 .25 (.160" .010") 2.29 .25 (.090" .010") .48 .05 (.019" .002") 25.4 (1.00") WVDC 200 100 50 MA20 6.35 .25 (.250" .010") 2.29 .25 (.090" .010") .48 .05 (.019" .002") 25.4 (1.00") WVDC 200 100 50 MA30 6.09 .25 (.240" .010") 3.30 .25 (.130" .010") .48 .05 (.019" .002") 25.4 (1.00") WVDC 200 100 50 For other tolerances see Part No. Codes For other voltages see Part No. Codes. AVX Style 36 MA40 9.91 .25 (.390" .010") 3.56 .25 (.140" .010") .63 .05 (.025" .002") 25.4 (1.00") WVDC 200 100 50 MA50 12.7 .51 (.500" .020") 6.35 .38 (.250" .015") .63 .05 (.025" .002") 25.4 (1.00") WVDC 200 100 50 MA60 17.53 .51 (.690" .020") 8.89 .51 (.350" .015") .63 .05 (.025" .002") 25.4 (1.00") WVDC 200 100 50 Axial Leads/Ceralam(R) Z5U Dielectric SIZE AND CAPACITANCE SPECIFICATIONS Dimensions: Millimeters (Inches) AVX Style Length Diameter Cap. in pF 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 820,000 1.0 F 1.2 F 1.5 F 1.8 F 2.2 F 2.7 F 3.3 F 3.9 F 4.7 F 5.6 F 6.8 F 8.2 F Lead Diameter Lead Length Typical AVX Part Nos. MA----5E102ZAA MA----5E122ZAA MA----5E152ZAA MA----5E182ZAA MA----5E222ZAA MA----5E272ZAA MA----5E332ZAA MA----5E392ZAA MA----5E472ZAA MA----5E562ZAA MA----5E682ZAA MA----5E822ZAA MA----5E103ZAA MA----5E123ZAA MA----5E153ZAA MA----5E183ZAA MA----5E223ZAA MA----5E273ZAA MA----5E333ZAA MA----5E393ZAA MA----5E473ZAA MA----5E563ZAA MA----5E683ZAA MA----5E823ZAA MA----5E104ZAA MA----5E124ZAA MA----5E154ZAA MA----5E184ZAA MA----5E224ZAA MA----5E274ZAA MA----5E334ZAA MA----5E394ZAA MA----5E474ZAA MA----5E564ZAA MA----5E684ZAA MA----5E824ZAA MA----5E105ZAA MA----5E125ZAA MA----5E155ZAA MA----5E185ZAA MA----5E225ZAA MA----5E275ZAA MA----5E335ZAA MA----5E395ZAA MA----5E475ZAA MA----5E565ZAA MA----5E685ZAA MA----5E825ZAA MA10 4.07 .25 (.160" .010") 2.29 .25 (.090" .010") .48 .05 (.019" .002") 25.4 (1.00") WVDC 200 100 50 MA20 6.35 .25 (.250" .010") 2.29 .25 (.090" .010") .48 .05 (.019" .002") 25.4 (1.00") WVDC 200 100 50 MA30 6.09 .25 (.240" .010") 3.30 .25 (.130" .010") .48 .05 (.019" .002") 25.4 (1.00") WVDC 200 100 50 For other tolerances see Part No. Codes For other voltages see Part No. Codes. AVX Style 37 MA40 9.91 .25 (.390" .010") 3.56 .25 (.140" .010") .63 .05 (.025" .002") 25.4 (1.00") WVDC 200 100 50 MA50 12.7 .51 (.500" .020") 6.35 .38 (.250" .015") .63 .05 (.025" .002") 25.4 (1.00") WVDC 200 100 50 MA60 17.53 .51 (.690" .020") 8.89 .51 (.350" .015") .63 .05 (.025" .002") 25.4 (1.00") WVDC 200 100 50 Axial Leads/Packaging TAPE AND REEL CLASS I / RS-296 D1 5mm 0.5mm (.200" 0.020") 52.4mm 1.5mm (2.063" 0.059") 6.35mm 0.4mm (0.250" 0.016") 1.4mm (0.055" MAX.) 1.2mm (0.047" MAX.) 1.6mm (0.063" MAX.) 356mm (14.00") 76mm (3.000") 25.4mm (1.000") 84mm (3.300") 70mm (2.750") A. B*. C. D1-D2. E. F. G. H. I. J. K. D2 F C E A B Leader Tape: 300mm min. (12") Splicing: Tape Only Missing Parts: 0.25% of component count max.No consecutive missing parts REEL QUANTITIES (Max.) Optional Design K H SA05 SA10 SA11 SA20 SA30 SA40 7,500 7,500 5,000 5,000 5,000 5,000 pcs. pcs. pcs. pcs. pcs. pcs. MA10 MA20 MA30 MA40 MA50 MA60 5,000 pcs. 5,000 pcs. 3,000 pcs. 3,000 pcs. 950 pcs. 650 pcs. J 1000 pc. reels available for distribution pack only in 1% and 2% tolerance. * I G Standard Tape Spacing Shown. Also available in 26.0mm + 1.5mm, - 0mm, (1.023 in. + .059 in. -0 in. ) for SpinGuards only. EIA Class I, II and III tape spacings are available for molded axials. Tape spacing for Class II is 63.5mm 1.5mm (2.50 in .059 in), and for Class III 73mm 1.5mm (2.87 in .059 in) ADDITIONAL PACKAGING AVAILABLE AMMO PACK Tape Spacing MA10, SA05, SA10 MA20, SA20 SA11 SA30 BOX SIZES (Nominal) MA30 MA40, SA40 L W H 73mm (2.874") 93mm (3.661") 48mm (1.889") 113mm (4.448") 52.4mm 1.5mm (2.062" .059") 4,000 pcs. 2000 2,000 pcs. 255mm (10.039") 26.0mm + 1.5mm - 0mm (1.023" + .059" - 0") 4,000 pcs.* 2000 2,000 pcs.* 255mm (10.039") *SpinGuard only BULK PACK (Molded Axials Only) MA10 MA20 MA30 MA40 100 pcs. (bag) MA50 MA60 50 pcs. (bag) 38 MIL-C-39014/Radial Leads HOW TO ORDER Military Type Designation: Styles CKR04, CKR05, CKR06, CKR08 Dash Number Option: MIL-C-39014/01 (Appropriate Dash Number) Part Number Example CKR05 BX 104 K S (V) Style Voltage-Temperature Limits Capacitance Code Capacitance Tolerance Military Failure Rate Standoff Option W L.D. T L.S. Figure 1 L W W W 1.250 Min. L.D. L.D. 1.250 Min. L.D. L.S. L L.S. Figure 2 L.S. Figure 3 Figure 4 To order standoff option, place "V" at the end of the part number. For example: CKRO5BXIO4KSV. MIL Part No. Codes Style: CK = General purpose, ceramic dielectric, fixed capacitors. R = Established Reliability parts. 05 = Remaining two numbers identify shape and dimension. PACKAGING REQUIREMENTS Packaging: 100 Pcs/bag; Radial Tape and Reel Packaging available upon request (2500 pcs./reel). Voltage-Temperature Limits: First letter identifies temperature range. B = -55C to +125C Second letter identifies voltage-temperature coefficient. SIZE SPECIFICATIONS Per Mil Spec MIL-C-39014 Capacitance Change with Reference to 25C Second Letter No Voltage Rated Voltage X +15, -15% +15, -25% Sig. Fig. Capacitance and Multiplier: First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. (For values below 10 pF, use "R" in place of decimal point, e.g., 1R4 = 1.4 pF). Capacitance Tolerances: K = 10%, M = 20% Military Failure Rate: M = 1% per 1000 hours; P = 0.1% per 1000 hours; R = 0.01% per 1000 hours; S = 0.001% per 1000 hours Note: AVX reserves the right to substitute a lower failure rate part per MIL-C-39014. Substitutability for failure rate levels shall be as follows: Failure Rate Level S (STD) (X-ray) R (STD) (No X-ray) P M T L T L Will Replace Failure Rate Level R, P, M, L P, M, L M,L L Dimensions: Millimeters (Inches) Case Size Length (L) Width (W) Thickness (T) Lead Spacing (L.S.) Lead Diameter (L.D.) CKR04 (Fig. 2) 4.83.25 4.83.25 2.29.25 2.54.38 .64.05 (.190.010) (.190.010) (.090.010) (.100.015) (.025.002) CKR05 (Fig. 1, 4) 4.83.25 4.83.25 2.29.25 5.08.38 .64.05 (.190.010) (.190.010) (.090.010) (.200.015) (.025.002) CKR06 (Fig. 2, 3) 7.37.25 7.37.25 2.29.25 5.08.38 .64.05 (.290.010) (.290.010) (.090.010) (.200.015) (.025.002) CKR08 (Fig. 2) 7.37.25 7.37.25 3.68.38 5.08.38 .64.05 (.290.010) (.290.010) (.145.015) (.200.015) (.025.002) MARKING Radial Lead Front CKR04/CKR05 Back J for JAN M390 14/01 1595 Abb. Military Part Number Military Slash Number Military Dash Number J AVX 9910 A CKR06/CKR08 M39014 2-1350 AVX Abb. Military Part Number Military Slash/Dash Number Mfg. I.D. Symbol Mfg. I.D. Symbol Date Code Lot Code Date Code Lot Code 9910A J 50V 105K J for JAN Voltage Rating Capacitance Value (3 digit Code) & Cap. Tol. 39 MIL-C-39014/Radial Leads MILITARY DASH NUMBER IDENTIFICATION CKR04 to MIL-C-39014/23 (Dash Number From Table) Military Type Designation Failure Rate Level (%/1,000 Hours) Capacitance Tolerance Percent 1.0 (M) 0.1 (P) WVDC CKR04BX100K_ CKR04BX100M_ CKR04BX120K_ CKR04BX150K_ CKR04BX150M_ 0001 0002 0003 0004 0005 0101 0102 0103 0104 0105 0201 0202 0203 0204 0205 0301 0302 0303 0304 0305 10 10 12 15 15 10 20 10 10 20 200 200 200 200 200 CKR04BX180K_ CKR04BX220K_ CKR04BX220M_ CKR04BX270K_ CKR04BX330K_ 0006 0007 0008 0009 0010 0106 0107 0108 0109 0110 0206 0207 0208 0209 0210 0306 0307 0308 0309 0310 18 22 22 27 33 10 10 20 10 10 200 200 200 200 200 CKR04BX330M_ CKR04BX390K_ CKR04BX470K_ CKR04BX470M_ CKR04BX560K_ 0011 0012 0013 0014 0015 0111 0112 0113 0114 0115 0211 0212 0213 0214 0215 0311 0312 0313 0314 0315 33 39 47 47 56 20 10 10 20 10 200 200 200 200 200 CKR04BX680K_ CKR04BX680M_ CKR04BX820K_ CKR04BX101K_ CKR04BX101M_ 0016 0017 0018 0019 0020 0116 0117 0118 0119 0120 0216 0217 0218 0219 0220 0316 0317 0318 0319 0320 68 68 82 100 100 10 20 10 10 20 200 200 200 200 200 CKR04BX121K_ CKR04BX151K_ CKR04BX151M_ CKR04BX181K_ CKR04BX221K_ 0021 0022 0023 0024 0025 0121 0122 0123 0124 0125 0221 0222 0223 0224 0225 0321 0322 0323 0324 0325 120 150 150 180 220 10 10 20 10 10 200 200 200 200 200 CKR04BX221M_ CKR04BX271K_ CKR04BX331K_ CKR04BX331M_ CKR04BX391K_ 0026 0027 0028 0029 0030 0126 0127 0128 0129 0130 0226 0227 0228 0229 0230 0326 0327 0328 0329 0330 220 270 330 330 390 20 10 10 20 10 200 200 200 200 200 CKR04BX471K_ CKR04BX471M_ CKR04BX561K_ CKR04BX681K_ CKR04BX681M_ 0031 0032 0033 0034 0035 0131 0132 0133 0134 0135 0231 0232 0233 0234 0235 0331 0332 0333 0334 0335 470 470 560 680 680 10 20 10 10 20 200 200 200 200 200 CKR04BX821K_ CKR04BX102K_ CKR04BX102M_ CKR04BX122K_ CKR04BX152K_ 0036 0037 0038 0039 0040 0136 0137 0138 0139 0140 0236 0237 0238 0239 0240 0336 0337 0338 0339 0340 820 1,000 1,000 1,200 1,500 10 10 20 10 10 200 200 200 100 100 CKR04BX152M_ CKR04BX182K_ CKR04BX222K_ CKR04BX222M_ CKR04BX272K_ 0041 0042 0043 0044 0045 0141 0142 0143 0144 0145 0241 0242 0243 0244 0245 0341 0342 0343 0344 0345 1,500 1,800 2,200 2,200 2,700 20 10 10 20 10 100 100 100 100 100 CKR04BX332K_ CKR04BX332M_ CKR04BX392K_ CKR04BX472K_ CKR04BX472M_ 0046 0047 0048 0049 0050 0146 0147 0148 0149 0150 0246 0247 0248 0249 0250 0346 0347 0348 0349 0350 3,300 3,300 3,900 4,700 4,700 10 20 10 10 20 100 100 100 100 100 CKR04BX562K_ CKR04BX682K_ CKR04BX682M_ CKR04BX822K_ CKR04BX103K_ 0051 0052 0053 0054 0055 0151 0152 0153 0154 0155 0251 0252 0253 0254 0255 0351 0352 0353 0354 0355 5,600 6,800 6,800 8,200 10,000 10 10 20 10 10 100 100 100 100 100 CKR04BX103M_ CKR04BX123K_ CKR04BX153K_ CKR04BX153M_ CKR04BX183K_ 0056 0057 0058 0059 0060 0156 0157 0158 0159 0160 0256 0257 0258 0259 0260 0356 0357 0358 0359 0360 10,000 12,000 15,000 15,000 18,000 20 10 10 20 10 100 50 50 50 50 CKR04BX223K_ CKR04BX223M_ CKR04BX273K_ CKR04BX333K_ CKR04BX333M_ 0061 0062 0063 0064 0065 0161 0162 0163 0164 0165 0261 0262 0263 0264 0265 0361 0362 0363 0364 0365 22,000 22,000 27,000 33,000 33,000 10 20 10 10 20 50 50 50 50 50 CKR04BX393K_ CKR04BX473K_ CKR04BX473M_ CKR04BX563K_ CKR04BX683K_ 0066 0067 0068 0069 0070 0166 0167 0168 0169 0170 0266 0267 0268 0269 0270 0366 0367 0368 0369 0370 39,000 47,000 47,000 56,000 68,000 10 10 20 10 10 50 50 50 50 50 CKR04BX683M_ CKR04BX823K_ CKR04BX104K_ CKR04BX104M_ 0071 0072 0073 0074 0171 0172 0173 0174 0271 0272 0273 0274 0371 0372 0373 0374 68,000 82,000 100,000 100,000 20 10 10 20 50 50 50 50 0.01 (R) 0.001 (S) Capacitance (pF) CKR04 (BX) Add appropriate failure rate level letter (M, P, R or S) 40 MIL-C-39014/Radial Leads MILITARY DASH NUMBER IDENTIFICATION CKR05 to MIL-C-39014/01 (Dash Number From Table) Military Type Designation Failure Rate Level (%/1,000 Hours) 0.01 (R) 0.001 (S) Capacitance (pF) Capacitance Tolerance Percent WVDC 1.0 (M) 0.1 (P) CKR05BX100K_ CKR05BX100M_ CKR05BX120K_ CKR05BX150K_ CKR05BX150M_ 1201 1202 1203 1204 1205 1241 1242 1243 1244 1245 1281 1282 1283 1284 1285 1321 1322 1323 1324 1325 10 10 12 15 15 10 20 10 10 20 200 200 200 200 200 CKR05BX180K_ CKR05BX220K_ CKR05BX220M_ CKR05BX270K_ CKR05BX330K_ 1206 1207 1208 1209 1210 1246 1247 1248 1249 1250 1286 1287 1288 1289 1290 1326 1327 1328 1329 1330 18 22 22 27 33 10 10 20 10 10 200 200 200 200 200 CKR05BX330M_ CKR05BX390K_ CKR05BX470K_ CKR05BX470M_ CKR05BX560K_ 1211 1212 1213 1214 1215 1251 1252 1253 1254 1255 1291 1292 1293 1294 1295 1331 1332 1333 1334 1335 33 39 47 47 56 20 10 10 20 10 200 200 200 200 200 CKR05BX680K_ CKR05BX680M_ CKR05BX820K_ CKR05BX101K_ CKR05BX101M_ 1216 1217 1218 1219 1220 1256 1257 1258 1259 1260 1296 1297 1298 1299 1300 1336 1337 1338 1339 1340 68 68 82 100 100 10 20 10 10 20 200 200 200 200 200 CKR05BX121K_ CKR05BX151K_ CKR05BX151M_ CKR05BX181K_ CKR05BX221K_ 1221 1222 1223 1224 1225 1261 1262 1263 1264 1265 1301 1302 1303 1304 1305 1341 1342 1343 1344 1345 120 150 150 180 220 10 10 20 10 10 200 200 200 200 200 CKR05BX221M_ CKR05BX271K_ CKR05BX331K_ CKR05BX331M_ CKR05BX391K_ 1226 1227 1228 1229 1230 1266 1267 1268 1269 1270 1306 1307 1308 1309 1310 1346 1347 1348 1349 1350 220 270 330 330 390 20 10 10 20 10 200 200 200 200 200 CKR05BX471K_ CKR05BX471M_ CKR05BX561K_ CKR05BX681K_ CKR05BX681M_ 1231 1232 1233 1234 1235 1271 1272 1273 1274 1275 1311 1312 1313 1314 1315 1351 1352 1353 1354 1355 470 470 560 680 680 10 20 10 10 20 200 200 200 200 200 CKR05BX821K_ CKR05BX102K_ CKR05BX102M_ CKR05BX122K_ CKR05BX152K_ 1236 1237 1238 1239 1240 1276 1277 1278 1279 1280 1316 1317 1318 1319 1320 1356 1357 1358 1359 1360 820 1,000 1,000 1,200 1,500 10 10 20 10 10 200 200 200 100 100 CKR05BX152M_ CKR05BX182K_ CKR05BX222K_ CKR05BX222M_ CKR05BX272K_ 1441 1442 1443 1444 1445 1481 1482 1483 1484 1485 1521 1522 1523 1524 1525 1561 1562 1563 1564 1565 1,500 1,800 2,200 2,200 2,700 20 10 10 20 10 100 100 100 100 100 CKR05BX332K_ CKR05BX332M_ CKR05BX392K_ CKR05BX472K_ CKR05BX472M_ 1446 1447 1448 1449 1450 1486 1487 1488 1489 1490 1526 1527 1528 1529 1530 1566 1567 1568 1569 1570 3,300 3,300 3,900 4,700 4,700 10 20 10 10 20 100 100 100 100 100 CKR05BX562K_ CKR05BX682K_ CKR05BX682M_ CKR05BX822K_ CKR05BX103K_ 1451 1452 1453 1454 1455 1491 1492 1493 1494 1495 1531 1532 1533 1534 1535 1571 1572 1573 1574 1575 5,600 6,800 6,800 8,200 10,000 10 10 20 10 10 100 100 100 100 100 CKR05BX103M_ CKR05BX123K_ CKR05BX153K_ CKR05BX153M_ CKR05BX183K_ 1456 1457 1458 1459 1460 1496 1497 1498 1499 1500 1536 1537 1538 1539 1540 1576 1577 1578 1579 1580 10,000 12,000 15,000 15,000 18,000 20 10 10 20 10 100 50 50 50 50 CKR05BX223K_ CKR05BX223M_ CKR05BX273K_ CKR05BX333K_ CKR05BX333M_ 1461 1462 1463 1464 1465 1501 1502 1503 1504 1505 1541 1542 1543 1544 1545 1581 1582 1583 1584 1585 22,000 22,000 27,000 33,000 33,000 10 20 10 10 20 50 50 50 50 50 CKR05BX393K_ CKR05BX473K_ CKR05BX473M_ CKR05BX563K_ CKR05BX683K_ 1466 1467 1468 1469 1470 1506 1507 1508 1509 1510 1546 1547 1548 1549 1550 1586 1587 1588 1589 1590 39,000 47,000 47,000 56,000 68,000 10 10 20 10 10 50 50 50 50 50 CKR05BX683M_ CKR05BX823K_ CKR05BX104K_ CKR05BX104M_ 1471 1472 1473 1474 1511 1512 1513 1514 1551 1552 1553 1554 1591 1592 1593 1594 68,000 82,000 100,000 100,000 20 10 10 20 50 50 50 50 CKR05 (BX) Add appropriate failure rate level letter (M, P, R or S) 41 MIL-C-39014/Radial Leads MILITARY DASH NUMBER IDENTIFICATION CKR06 to MIL-C-39014/02 (Dash Number From Table) Military Type Designation Failure Rate Level (%/1,000 Hours) 0.001 (S) Capacitance (pF) Capacitance Tolerance Percent 1.0 (M) 0.1 (P) WVDC CKR06BX122K_ CKR06BX152K_ CKR06BX152M_ CKR06BX182K_ CKR06BX222K_ 1201 1202 1203 1204 1206 1241 1242 1243 1244 1246 1281 1282 1283 1284 1286 1321 1322 1323 1324 1326 1200 1500 1500 1800 2200 10 10 20 10 10 200 200 200 200 200 CKR06BX222M_ CKR06BX272K_ CKR06BX332K_ CKR06BX332M_ CKR06BX392K_ 1207 1208 1209 1210 1211 1247 1248 1249 1250 1251 1287 1288 1289 1290 1291 1327 1328 1329 1330 1331 2200 2700 3300 3300 3900 20 10 10 20 10 200 200 200 200 200 CKR06BX472K_ CKR06BX472M_ CKR06BX562K_ CKR06BX682K_ CKR06BX682M_ 1212 1213 1214 1215 1216 1252 1253 1254 1255 1256 1292 1293 1294 1295 1296 1332 1333 1334 1335 1336 4700 4700 5600 6800 6800 10 20 10 10 20 200 200 200 200 200 CKR06BX822K_ CKR06BX103K_ CKR06BX103M_ CKR06BX123K_ CKR06BX153K_ 1217 1218 1219 1231 1220 1257 1258 1259 1271 1260 1297 1298 1299 1311 1300 1337 1338 1339 1351 1340 8200 10,000 10,000 12,000 15,000 10 10 20 10 10 200 200 200 100 100 CKR06BX183K_ CKR06BX223K_ CKR06BX273K_ CKR06BX333K_ CKR06BX393K_ 1221 1222 1232 1223 1224 1261 1262 1272 1263 1264 1301 1302 1312 1303 1304 1341 1342 1352 1343 1344 18,000 22,000 27,000 33,000 39,000 10 10 10 10 10 100 100 100 100 100 CKR06BX473K_ CKR06BX563K_ CKR06BX683K_ CKR06BX823K_ CKR06BX104K_ 1225 1226 1227 1229 1230 1265 1266 1267 1269 1270 1305 1306 1307 1309 1310 1345 1346 1347 1349 1350 47,000 56,000 68,000 82,000 100,000 10 10 10 10 10 100 100 100 100 100 CKR06BX124K_ CKR06BX154K_ CKR06BX184K_ CKR06BX224K_ CKR06BX274K_ 1233 1234 1235 1236 1237 1273 1274 1275 1276 1277 1313 1314 1315 1316 1317 1353 1354 1355 1356 1357 120,000 150,000 180,000 220,000 270,000 10 10 10 10 10 50 50 50 50 50 CKR06BX334K_ CKR06BX394K_ CKR06BX474K_ CKR06BX564K_ CKR06BX684K_ 1238 1239 1240 1404 1405 1278 1279 1280 1408 1409 1318 1319 1320 1412 1413 1358 1359 1360 1416 1417 330,000 390,000 470,000 560,000 680,000 10 10 10 10 10 50 50 50 50 50 CKR06BX824K_ CKR06BX105K_ 1406 1407 1410 1411 1414 1415 1418 1419 820,000 1,000,000 10 10 50 50 0.01 (R) CKR06 (BX) Add appropriate failure rate level letter (M, P, R or S) CKR08 to MIL-C-39014/20 (Dash Number From Table) Military Type Designation Failure Rate Level (%/1,000 Hours) Capacitance (pF) 1.0 (M) Capacitance Tolerance Percent WVDC CKR08 (BX) CKR08BX125K_ CKR08BX155K_ CKR08BX205K_ 0104 0105 0106 1,200,000 1,500,000 2,000,000 10 10 10 50 50 50 Add appropriate failure rate level letter (M) CROSS REFERENCE CHART - AVX MILITARY FOR MOLDED RADIAL LEAD Per Mil-Spec AVX Figure Style MIL-C-11015 MIL-C-39014 Case Size MIL-C-20 Length(L) Width (W) Thickness (T) Lead Spacing (LS) Lead Diameter (LD) 1 MR05 CK05 CKR05 CCR05/CC05 4.83.25 (.190.010) 4.83.25 (.190.010) 2.29.25 (.090.010) 2 MR04 -- CKR04 CCR09/CC09 4.83.25 (.190.010) 4.83.25 (.190.010) 2.29.25 (.090.010) 2.54.38 (.100.015) .64.05 (.025.002) 2 MR06 CK06 CKR06 CCR06/CC06 7.37.25 (.290.010) 7.37.25 (.290.010) 2.29.25 (.090.010) 5.08.38 (.200.015) .64.05 (.025.002) 2 MR68 -- CKR08 -- 7.37.25 (.290.010) 7.37.25 (.290.010) 3.68.38 (.145.015) 5.08.38 (.200.015) .64.05 (.025.002) 2 MR07 -- -- CCR07/CC07 12.19.51 (.480.020) 12.19.51 (.480.020) 3.56.25 (.140.010) 10.16.51 (.400.020) .64.05 (.025.002) 2 MR08 -- -- CCR08/CC08 12.19.51 (.480.020) 12.19.51 (.480.020) 6.1.25 (.240.010) 5.08.38 (.200.015) .64.05 (.025.002) 10.16.51 (.400.020) .64.05 (.025.002) Dimensions: Millimeters (Inches) 42 MIL-C-39014/Axial Leads HOW TO ORDER Military Type Designation: Styles CKR11, CKR12, CKR14, CKR15, CKR16 Dash Number Option: MIL-C-39014/05 (Add Appropriate Dash Number) Part Number Example CKR11 BX 103 K S Style Voltage-Temperature Limits Capacitance Code Capacitance Tolerance Military Failure Rate MIL Part No. Codes Note: AVX reserves the right to substitute a lower failure rate part per MIL-C-39014/5E. Substitutability for failure rate levels shall be as follows: Style: CK = General purpose, ceramic dielectric, fixed capacitors. R = Established Reliability parts. 11 = Remaining two numbers identify shape and dimension. Failure Rate Level S (STD) (X-ray) R (STD) (No X-ray) P M Voltage-Temperature Limits: First letter identifies temperature range. B = -55C to +125C Second letter identifies voltage-temperature coefficient. Will Replace Failure Rate Level R, P, M, L P, M, L M,L L PACKAGING REQUIREMENTS Capacitance Change with Reference to 25C Second Letter No Voltage Rated Voltage R +15, -15% +15, -40% X +15, -15% +15, -25% Sig. Fig. Capacitance and Multiplier: First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 10,000 pF as 103. Capacitance Tolerances: K = 10%, M = 20% Military Failure Rate: M = 1% per 1000 hours P = 0.1% per 1000 hours R = 0.01% per 1000 hours S = 0.001% per 1000 hours L 1.25 MIN. D Packaging: Bulk CKR11, 12, & 14 CKR15 & 16 Tape & Reel CKR11, 12 CKR14 CKR15 CKR16 5000 pcs per reel 3000 pcs per reel 950 pcs per reel 650 pcs per reel SIZE SPECIFICATIONS Dimensions: Millimeters (Inches) Per Mil Spec 100 pcs per bag 50 pcs per bag Case Size Length (L) Diameter (D) Lead Diameter (L.D.) CKR11 4.07.25 (.160.010) 2.29.25 (.090.010) .48.05 (.019.002) CKR12 6.35.25 (.250.010) 2.29.25 (.090.010) .48.05 (.019.002) CKR14 9.91.25 (.390.010) 3.56.25 (.140.010) .63.025 (.025.002) CKR15 12.7.51 (.500.020) 6.35.38 (.250.015) .63.05 (.025.002) CKR16 17.53.51 (.690.020) 8.89.51 (.350.020) .63.05 (.025.002) MIL-C-39014 L.D. 43 MIL-C-39014/Axial Leads MILITARY DASH NUMBER IDENTIFICATION CKR11 to MIL-C-39014/05 (Dash Number From Table) Military Type Designation Failure Rate Level (%/1,000 Hours) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) Capacitance (pF) Capacitance Tolerance Percent WVDC CKR11 (BX) CKR11BX100K_ CKR11BX100M_ CKR11BX120K_ CKR11BX150K_ CKR11BX150M_ 2601 2602 2603 2604 2605 2801 2802 2803 2804 2805 2001 2002 2003 2004 2005 2201 2202 2203 2204 2205 10 10 12 15 15 10 20 10 10 20 100 100 100 100 100 CKR11BX180K_ CKR11BX220K_ CKR11BX220M_ CKR11BX270K_ CKR11BX330K_ 2606 2607 2608 2609 2610 2806 2807 2808 2809 2810 2006 2007 2008 2009 2010 2206 2207 2208 2209 2210 18 22 22 27 33 10 10 20 10 10 100 100 100 100 100 CKR11BX330M_ CKR11BX390K_ CKR11BX470K_ CKR11BX470M_ CKR11BX560K_ 2611 2612 2613 2614 2615 2811 2812 2813 2814 2815 2011 2012 2013 2014 2015 2211 2212 2213 2214 2215 33 39 47 47 56 20 10 10 20 10 100 100 100 100 100 CKR11BX680K_ CKR11BX680M_ CKR11BX820K_ CKR11BX101K_ CKR11BX101M_ 2616 2617 2618 2619 2620 2816 2817 2818 2819 2820 2016 2017 2018 2019 2020 2216 2217 2218 2219 2220 68 68 82 100 100 10 20 10 10 20 100 100 100 100 100 CKR11BX121K_ CKR11BX151K_ CKR11BX151M_ CKR11BX181K_ CKR11BX221K_ 2621 2622 2623 2624 2625 2821 2822 2823 2824 2825 2021 2022 2023 2024 2025 2221 2222 2223 2224 2225 120 150 150 180 220 10 10 20 10 10 100 100 100 100 100 CKR11BX221M_ CKR11BX271K_ CKR11BX331K_ CKR11BX331M_ CKR11BX391K_ 2626 2627 2628 2629 2630 2826 2827 2828 2829 2830 2026 2027 2028 2029 2030 2226 2227 2228 2229 2230 220 270 330 330 390 20 10 10 20 10 100 100 100 100 100 CKR11BX471K_ CKR11BX471M_ CKR11BX561K_ CKR11BX681K_ CKR11BX681M_ 2631 2632 2633 2634 2635 2831 2832 2833 2834 2835 2031 2032 2033 2034 2035 2231 2232 2233 2234 2235 470 470 560 680 680 10 20 10 10 20 100 100 100 100 100 CKR11BX821K_ CKR11BX102K_ CKR11BX102M_ CKR11BX122K_ CKR11BX152K_ 2636 2637 2638 2639 2640 2836 2837 2838 2839 2840 2036 2037 2038 2039 2040 2236 2237 2238 2239 2240 820 1000 1000 1200 1500 10 10 20 10 10 100 100 100 100 100 CKR11BX152M_ CKR11BX182K_ CKR11BX222K_ CKR11BX222M_ CKR11BX272K_ 2641 2642 2643 2644 2645 2841 2842 2843 2844 2845 2041 2042 2043 2044 2045 2241 2242 2243 2244 2245 1500 1800 2200 2200 2700 20 10 10 20 10 100 100 100 100 100 CKR11BX332K_ CKR11BX332M_ CKR11BX392K_ CKR11BX472K_ CKR11BX472M_ 2646 2647 2648 2649 2650 2846 2847 2848 2849 2850 2046 2047 2048 2049 2050 2246 2247 2248 2249 2250 3300 3300 3900 4700 4700 10 20 10 10 20 100 100 100 100 100 CKR11BX562K_ CKR11BX682K_ CKR11BX682M_ CKR11BX822K_ CKR11BX103K_ CKR11BX103M_ 2651 2652 2653 2654 2655 2656 2851 2852 2853 2854 2855 2856 2051 2052 2053 2054 2055 2056 2251 2252 2253 2254 2255 2256 5600 6800 6800 8200 10,000 10,000 10 10 20 10 10 20 50 50 50 50 50 50 Add appropriate failure rate level letter (M, P, R or S) 44 MIL-C-39014/Axial Leads MILITARY DASH NUMBER IDENTIFICATION CKR12/14/15 to MIL-C-39014/05 (Dash Number From Table) Military Type Designation Failure Rate Level (%/1,000 Hours) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) Capacitance (pF) Capacitance Tolerance Percent WVDC CKR12 (BX) CKR12BX562K_ CKR12BX682K_ CKR12BX682M_ CKR12BX822K_ CKR12BX103K_ 2657 2658 2659 2660 2661 2857 2858 2859 2860 2861 2057 2058 2059 2060 2061 2257 2258 2259 2260 2261 5600 6800 6800 8200 10,000 10 10 20 10 10 100 100 100 100 100 CKR12BX103M_ CKR12BX123K_ CKR12BX153K_ CKR12BX153M_ CKR12BX183K_ 2662 2663 2664 2665 2666 2862 2863 2864 2865 2866 2062 2063 2064 2065 2066 2262 2263 2264 2265 2266 10,000 12,000 15,000 15,000 18,000 20 10 10 20 10 100 50 50 50 50 CKR12BX223K_ CKR12BX223M_ CKR12BX273K_ CKR12BX333K_ CKR12BX333M_ 2667 2668 2669 2670 2671 2867 2868 2869 2870 2871 2067 2068 2069 2070 2071 2267 2268 2269 2270 2271 22,000 22,000 27,000 33,000 33,000 10 20 10 10 20 50 50 50 50 50 CKR12BX393K_ CKR12BX473K_ CKR12BX473M_ 2672 2673 2674 2872 2873 2874 2072 2073 2074 2272 2273 2274 39,000 47,000 47,000 10 10 20 50 50 50 CKR14 (BX) CKR14BX123K_ CKR14BX153K_ CKR14BX153M_ CKR14BX183K_ CKR14BX223K_ 2675 2676 2677 2678 2679 2875 2876 2877 2878 2879 2075 2076 2077 2078 2079 2275 2276 2277 2278 2279 12,000 15,000 15,000 18,000 22,000 10 10 20 10 10 100 100 100 100 100 CKR14BX223M_ CKR14BX273K_ CKR14BX333K_ CKR14BX333M_ CKR14BX393K_ 2680 2681 2682 2683 2684 2880 2881 2882 2883 2884 2080 2081 2082 2083 2084 2280 2281 2282 2283 2284 22,000 27,000 33,000 33,000 39,000 20 10 10 20 10 100 100 100 100 100 CKR14BX473K_ CKR14BX473M_ CKR14BX563K_ CKR14BX683K_ CKR14BX683M_ 2685 2686 2687 2688 2689 2885 2886 2887 2888 2889 2085 2086 2087 2088 2089 2285 2286 2287 2288 2289 47,000 47,000 56,000 68,000 68,000 10 20 10 10 20 100 100 50 50 50 CKR14BX823K_ CKR14BX104K_ CKR14BX104M_ 2690 2691 2692 2890 2891 2892 2090 2091 2092 2290 2291 2292 82,000 100,000 100,000 10 10 20 50 50 50 CKR14 (BR) CKR14BR563K_ CKR14BR683K_ CKR14BR683M_ CKR14BR823K_ CKR14BR104K_ 2693 2694 2695 2696 2697 2893 2894 2895 2896 2897 2093 2094 2095 2096 2097 2293 2294 2295 2296 2297 56,000 68,000 68,000 82,000 100,000 10 10 20 10 10 100 100 100 100 100 CKR14BR104M_ CKR14BR124K_ CKR14BR154K_ CKR14BR154M_ CKR14BR184K_ 2698 2699 2700 2701 2702 2898 2899 2900 2901 2902 2098 2099 2100 2101 2102 2298 2299 2300 2301 2302 100,000 120,000 150,000 150,000 180,000 20 10 10 20 10 100 50 50 50 50 CKR14BR224K_ CKR14BR224M_ CKR14BR274K_ 2703 2704 2705 2903 2904 2905 2103 2104 2105 2303 2304 2305 220,000 220,000 270,000 10 20 10 50 50 50 CKR15BX563K_ CKR15BX683K_ CKR15BX683M_ CKR15BX823K_ CKR15BX104K_ CKR15BX104M_ 2706 2707 2708 2709 2710 2711 2906 2907 2908 2909 2910 2911 2306 2307 2308 2309 2310 2311 56,000 68,000 68,000 82,000 100,000 100,000 10 10 20 10 10 20 100 100 100 100 100 100 CKR15 (BX) 2106 2107 2108 2109 2110 2111 Add appropriate failure rate level letter (M, P, R or S) 45 MIL-C-39014/Axial Leads MILITARY DASH NUMBER IDENTIFICATION CKR15/16 to MIL-C-39014/05 (Dash Number From Table) Military Type Designation Failure Rate Level (%/1,000 Hours) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) Capacitance (pF) Capacitance Tolerance Percent WVDC CKR15 (BR) CKR15BR124K_ CKR15BR154K_ CKR15BR154M_ CKR15BR184K_ CKR15BR224K_ 2712 2713 2714 2715 2716 2912 2913 2914 2915 2916 2112 2113 2114 2115 2116 2312 2313 2314 2315 2316 120,000 150,000 150,000 180,000 220,000 10 10 20 10 10 100 100 100 100 100 CKR15BR224M_ CKR15BR274K_ CKR15BR334K_ CKR15BR334M_ CKR15BR474K_ 2717 2718 2719 2720 2721 2917 2918 2919 2920 2921 2117 2118 2119 2120 2121 2317 2318 2319 2320 2321 220,000 270,000 330,000 330,000 470,000 20 10 10 20 10 100 100 100 100 50 CKR15BR474M_ CKR15BR684K_ CKR15BR684M_ CKR15BR105K_ CKR15BR105M_ 2722 2723 2724 2725 2726 2922 2923 2924 2925 2926 2122 2123 2124 2125 2126 2322 2323 2324 2325 2326 470,000 680,000 680,000 1,000,000 1,000,000 20 10 20 10 20 50 50 50 50 50 CKR16BR474K_ CKR16BR474M_ CKR16BR684K_ CKR16BR684M_ CKR16BR105K_ 2727 2728 2729 2730 2731 2927 2928 2929 2930 2931 2127 2128 2129 2130 2131 2327 2328 2329 2330 2331 470,000 470,000 680,000 680,000 1,000,000 10 20 10 20 10 100 100 100 100 100 CKR16BR105M_ CKR16BR225K_ CKR16BR225M_ CKR16BR335K_ CKR16BR335M_ 2732 2733 2734 2735 2736 2932 2933 2934 2935 2936 2132 2133 2134 2135 2136 2332 2333 2334 2335 2336 1,000,000 2,200,000 2,200,000 3,300,000 3,300,000 20 10 20 10 20 100 50 50 50 50 CKR16 (BR) Add appropriate failure rate level letter (M, P, R or S) MARKING CKR12 CKR11 JA 100 KS99 10AA CKR12 2257J 9910AA 04222 J for JAN, A for AVX Capacitance Value (3 digit code) K for Cap. Tol. code (K10%, M20% S for failure rate, 2 digit year 2 digit week, 2 digit Lot Code Style Military Slash/Dash Number "J" or "JA" 4 digit Date Code, 2 digit Lot Code AVX FSCM CKR14, 15, 16 M39014 5-2291 AVX 9910AA J50V 104K Abb. Military Part Number Military Slash/Dash Number Mfg. I.D. Symbol 4 digit Date Code, 2 digit Lot Code "J" Brand Symbol, Voltage Capacitance Value (3 digit code) and Cap. Tolerance CROSS REFERENCE CHART - AVX MILITARY FOR MOLDED AXIAL LEAD Per Mil-Spec Case Size AVX Style MIL-C-11015 MIL-C-39014 MIL-C-20 MA10 CK12 CKR11 CCR75/CC75 MA20 CK13 CKR12 CCR76/CC76 MA30 -- -- -- MA40 CK14 CKR14 CCR77/CC77 MA50 CK15 CKR15 CCR78/CC78 MA60 CK16 CKR16 CCR79/CC79 Length (L) Diameter (D) Lead Diameter (L.D.) 4.07 .25 (.160.010) 6.35 .25 (.250 .010) 6.10 .25 (.240.010) 9.91.25 (.390.010) 12.7.51 (.500.020) 17.53.51 (.690.020) 2.29.25 (.090.010) 2.29.25 (.090.010) 3.30.25 (.130.010) 3.56.25) (.140.010) 6.35.38 (.250.015) 8.89.51 (.350.015) .48.05 (.019.002) .48.05 (.019.002) .48.05 (.019.002) .63.05 (.025.002) .63.05 (.025.002) .63.05 (.025.002) Dimensions: Millimeters (Inches) 46 MIL-C-39014/2Pin DIP HOW TO ORDER Military Type Designation: Styles CKR22, CKR23, CKR24 Dash Number Option: MIL-C-39014/22 (Add Appropriate Dash Number) Part Number Example CKR22 BX 104 K R Style Voltage-Temperature Limits Capacitance Code Capacitance Tolerance Military Failure Rate MIL Part No. Codes Style: CK = General purpose, ceramic dielectric, fixed capacitors. R = Established Reliability parts. 22 = Remaining two numbers identify shape and dimension. T MAX. L H1 MAX. SEE NOTE 1 SEE NOTE 2 Voltage-Temperature Limits: First letter identifies temperature range. B = -55C to +125C C = -55C to +150C .325 .035 .012 .004 .400 max. H2 MAX. See Note 3 .015 MIN .019 .004 .058 .012 Second letter identifies voltage-temperature coefficient. 60 TYP. 20 Capacitance Change with Reference to 25C Second Letter No Voltage Rated Voltage G +30, -30ppm +30, -30ppm H +60, -60ppm +60, -60ppm R +15, -15% +15, -40% X +15, -15% +15, -25% Note 1 = Leads centered within .005" Note 2 = Angle shall be 95, +10, -5 Note 3 = .140 .020 inch (3.56 0.51mm) for standard lead length; .170 .010 inch (4.32 0.25mm) for optional longer lead length. Sig. Fig. Capacitance and Multiplier: First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. (For values below 10 pF, use "R" in place of decimal point, e.g., 1R5 = 1.5 pF). Capacitance Tolerances: D = .5pF, F = 1%, J = 5%, K = 10%, M = 20% Military Failure Rate: M = 1% per 1000 hours P = 0.1% per 1000 hours R = 0.01% per 1000 hours S = 0.001% per 1000 hours Note: AVX reserves the right to substitute a lower failure rate part per MIL-C-39014. Substitutability for failure rate levels shall be as follows: Failure Rate Level S (STD) (X-ray) R (STD) (No X-ray) P M .019 .004 .010 MAX. PACKAGING REQUIREMENTS Packaging: 200 pcs/slide pack. See page 26. SIZE SPECIFICATIONS Dimensions: Millimeters (Inches) Will Replace Failure Rate Level R, P, M, L P, M, L M,L L 47 MIL-C-39014 Length (L) Height (H1) Height (H2) Thickness CKR22 6.60 (.260 .020) 3.25 (.128 .007) 4.45 max. (.175) 2.34 (.092 .006) CKR23 6.60 (.260 .020) 3.94 (.155 .007) 4.45 max. (.175) 2.34 (.092 .006) CKR24 6.60 (.260 .020) 7.19 (.283 .007) 8.13 max. (.320) 2.34 (.092 .006) MIL-C-39014/2Pin DIP MILITARY DASH NUMBER IDENTIFICATION CKR22 to MIL-C-39014/22 (Dash Number From Table) Military Type Designation Failure Rate Level (%/1,000 Hours) Standard Lead Length Optional Longer Lead Length 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) Capacitance (pF) Capacitance Tolerance WVDC Style CKR22, Voltage-temperature limits of 0 60 ppm/C. CKR22CH1R0D_ CKR22CH1R2D_ CKR22CH1R5D_ CKR22CH1R8D_ CKR22CH2R2D_ 0001 0004 0007 0010 0013 0301 0304 0307 0310 0313 0601 0604 0607 0610 0613 0901 0904 0907 0910 0913 3001 3004 3007 3010 3013 3301 3304 3307 3310 3313 3601 3604 3607 3610 3613 3901 3904 3907 3910 3913 1.0 1.2 1.5 1.8 2.2 D D D D D CKR22CH2R7D_ CKR22CH3R3D_ CKR22CH3R9D_ CKR22CH4R7D_ CKR22CH5R6D_ 0016 0019 0022 0025 0028 0316 0319 0322 0325 0328 0616 0619 0622 0625 0628 0916 0919 0922 0925 0928 3016 3019 3022 3025 3028 3316 3319 3322 3325 3328 3616 3619 3622 3625 3628 3916 3919 3922 3925 3928 2.7 3.3 3.9 4.7 5.6 D D D D D CKR22CH6R8D_ CKR22CH8R2D_ CKR22CH100D_ CKR22CH100J_ CKR22CH100K_ 0031 0034 0037 0038 0039 0331 0334 0337 0338 0339 0631 0634 0637 0638 0639 0931 0934 0937 0938 0939 3031 3034 3037 3038 3039 3331 3334 3337 3338 3339 3631 3634 3637 3638 3639 3931 3934 3937 3938 3939 6.8 8.2 10 10 10 D D D J K CKR22CH120D_ CKR22CH120J_ CKR22CH120K_ CKR22CH150D_ CKR22CH150J_ 0040 0041 0042 0043 0044 0340 0341 0342 0343 0344 0640 0641 0642 0643 0644 0940 0941 0942 0943 0944 3040 3041 3042 3043 3044 3340 3341 3342 3343 3344 3640 3641 3642 3643 3644 3940 3941 3942 3943 3944 12 12 12 15 15 D J K D J CKR22CH150K_ CKR22CH180D_ CKR22CH180J_ CKR22CH180K_ 0045 0046 0047 0048 0345 0346 0347 0348 0645 0646 0647 0648 0945 0946 0947 0948 3045 3046 3047 3048 3345 3346 3347 3348 3645 3646 3647 3648 3945 3946 3947 3948 15 18 18 18 K D J K CKR22CG220D_ CKR22CG220J_ CKR22CG220K_ CKR22CG270D_ CKR22CG270J_ CKR22CG270K_ CKR22CG330D_ CKR22CG330J_ CKR22CG330K_ CKR22CG390D_ CKR22CG390J_ CKR22CG390K_ CKR22CG470D_ CKR22CG470J_ CKR22CG470K_ CKR22CG560D_ CKR22CG560J_ CKR22CG560K_ CKR22CG680F_ CKR22CG680J_ CKR22CG680K_ CKR22CG820F_ CKR22CG820J_ CKR22CG820K_ CKR22CG101F_ CKR22CG101J_ CKR22CG101K_ CKR22CG121F_ CKR22CG121J_ CKR22CG121K_ CKR22CG151F_ CKR22CG151J_ CKR22CG151K_ CKR22CG181F_ CKR22CG181J_ CKR22CG181K_ CKR22CG221F_ CKR22CG221J_ CKR22CG221K_ CKR22CG271F_ CKR22CG271J_ 0049 0050 0051 0052 0053 0054 0055 0056 0057 0058 0059 0060 0061 0062 0063 0064 0065 0066 0067 0068 0069 0070 0071 0072 0073 0074 0075 0076 0077 0078 0079 0080 0081 0082 0083 0084 0085 0086 0087 0088 0089 0349 0350 0351 0352 0353 0354 0355 0356 0357 0358 0359 0360 0361 0362 0363 0364 0365 0366 0367 0368 0369 0370 0371 0372 0373 0374 0375 0376 0377 0378 0379 0380 0381 0382 0383 0384 0385 0386 0387 0388 0389 200 200 Style CKR22, Voltage-temperature limits of 30 ppm/C, 0649 0650 0651 0652 0653 0654 0655 0656 0657 0658 0659 0660 0661 0662 0663 0664 0665 0666 0667 0668 0669 0670 0671 0672 0673 0674 0675 0676 0677 0678 0679 0680 0681 0682 0683 0684 0685 0686 0687 0688 0689 0949 0950 0951 0952 0953 0954 0955 0956 0957 0958 0959 0960 0961 0962 0963 0964 0965 0966 0967 0968 0969 0970 0971 0972 0973 0974 0975 0976 0977 0978 0979 0980 0981 0982 0983 0984 0985 0986 0987 0988 0989 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374 3375 3376 3377 3378 3379 3380 3381 3382 3383 3384 3385 3386 3387 3388 3389 Add appropriate failure rate level letter (M, P, R or S) 48 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686 3687 3688 3689 3949 3950 3951 3952 3953 3954 3955 3956 3957 3958 3959 3960 3961 3962 3963 3964 3965 3966 3967 3968 3969 3970 3971 3972 3973 3974 3975 3976 3977 3978 3979 3980 3981 3982 3983 3984 3985 3986 3987 3988 3989 22 22 22 27 27 27 33 33 33 39 39 39 47 47 47 56 56 56 68 68 68 82 82 82 100 100 100 120 120 120 150 150 150 180 180 180 220 220 220 270 270 D J K D J K D J K D J K D J K D J K F J K F J K F J K F J K F J K F J K F J K F J 200 200 MIL-C-39014/2Pin DIP MILITARY DASH NUMBER IDENTIFICATION CKR22 to MIL-C-39014/22 (Dash Number From Table) Military Type Designation Failure Rate Level (%/1,000 Hours) Standard Lead Length Optional Longer Lead Length 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) Capacitance (pF) Capacitance Tolerance WVDC Style CKR22, Voltage-temperature limits of 30 ppm/C, (continued) CKR22CG271K_ CKR22CG331F_ CKR22CG331J_ CKR22CG331K_ CKR22CG391F_ 0090 0091 0092 0093 0094 0390 0391 0392 0393 0394 0690 0691 0692 0693 0694 0990 0991 0992 0993 0994 3090 3091 3092 3093 3094 3390 3391 3392 3393 3394 3690 3691 3692 3693 3694 3990 3991 3992 3993 3994 270 330 330 330 390 K F J K F CKR22CG391J_ CKR22CG391K_ CKR22CG471F_ CKR22CG471J_ CKR22CG471K_ 0095 0096 0097 0098 0099 0395 0396 0397 0398 0399 0695 0696 0697 0698 0699 0995 0996 0997 0998 0999 3095 3096 3097 3098 3099 3395 3396 3397 3398 3399 3695 3696 3697 3698 3699 3995 3996 3997 3998 3999 390 390 470 470 470 J K F J K CKR22CG561F_ CKR22CG561J_ CKR22CG561K_ CKR22CG681F_ CKR22CG681J_ 0100 0101 0102 0103 0104 0400 0401 0402 0403 0404 0700 0701 0702 0703 0704 1000 1001 1002 1003 1004 3100 3101 3102 3103 3104 3400 3401 3402 3403 3404 3700 3701 3702 3703 3704 4000 4001 4002 4003 4004 560 560 560 680 680 F J K F J CKR22CG681K_ CKR22CG821F_ CKR22CG821J_ CKR22CG821K_ CKR22CG102F_ 0105 0106 0107 0108 0109 0405 0406 0407 0408 0409 0705 0706 0707 0708 0709 1005 1006 1007 1008 1009 3105 3106 3107 3108 3109 3405 3406 3407 3408 3409 3705 3706 3707 3708 3709 4005 4006 4007 4008 4009 680 820 820 820 1000 K F J K F CKR22CG102J_ CKR22CG102K_ CKR22CG122F_ CKR22CG122J_ CKR22CG122K_ CKR22CG152F_ CKR22CG152J_ CKR22CG152K_ CKR22CG182F_ CKR22CG182J_ CKR22CG182K_ CKR22CG222F_ CKR22CG222J_ CKR22CG222K_ CKR22CG272F_ CKR22CG272J_ CKR22CG272K_ CKR22CG332F_ CKR22CG332J_ CKR22CG332K_ CKR22CG392F_ CKR22CG392J_ CKR22CG392K_ CKR22CG472F_ CKR22CG472J_ CKR22CG472K_ CKR22CG562F_ CKR22CG562J_ CKR22CG562K_ CKR22CG682F_ CKR22CG682J_ CKR22CG682K_ CKR22CG822F_ CKR22CG822J_ CKR22CG822K_ CKR22CG103F_ CKR22CG103J_ CKR22CG103K_ 0110 0111 0112 0113 0114 0115 0116 0117 0118 0119 0120 0121 0122 0123 0124 0125 0126 0127 0128 0129 0130 0131 0132 0133 0134 0135 0136 0137 0138 0139 0140 0141 0142 0143 0144 0145 0146 0147 0410 0411 0412 0413 0414 0415 0416 0417 0418 0419 0420 0421 0422 0423 0424 0425 0426 0427 0428 0429 0430 0431 0432 0433 0434 0435 0436 0437 0438 0439 0440 0441 0442 0443 0444 0445 0446 0447 0710 0711 0712 0713 0714 0715 0716 0717 0718 0719 0720 0721 0722 0723 0724 0725 0726 0727 0728 0729 0730 0731 0732 0733 0734 0735 0736 0737 0738 0739 0740 0741 0742 0743 0744 0745 0746 0747 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 3110 3111 3112 3113 3114 3115 3116 3117 3118 3119 3120 3121 3122 3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 3440 3441 3442 3443 3444 3445 3446 3447 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721 3722 3723 3724 3725 3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740 3741 3742 3743 3744 3745 3746 3747 4010 4011 4012 4013 4014 4015 4016 4017 4018 4019 4020 4021 4022 4023 4024 4025 4026 4027 4028 4029 4030 4031 4032 4033 4034 4035 4036 4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 1000 1000 1200 1200 1200 1500 1500 1500 1800 1800 1800 2200 2200 2200 2700 2700 2700 3300 3300 3300 3900 3900 3900 4700 4700 4700 5600 5600 5600 6800 6800 6800 8200 8200 8200 10,000 10,000 10,000 J K F J K F J K F J K F J K F J K F J K F J K F J K F J K F J K F J K F J K Add appropriate failure rate level letter (M, P, R or S) 49 200 200 100 100 50 50 MIL-C-39014/2Pin DIP MILITARY DASH NUMBER IDENTIFICATION CKR22 to MIL-C-39014/22 (Dash Number From Table) Military Type Designation Failure Rate Level (%/1,000 Hours) Standard Lead Length Optional Longer Lead Length 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) Capacitance (pF) Capacitance Tolerance WVDC Style CKR22, Voltage-temperature limits of 15% (+15%, -25% for Rated Voltage) CKR22BX271K_ CKR22BX331K_ CKR22BX331M_ CKR22BX391K_ CKR22BX471K_ 0148 0149 0150 0151 0152 0448 0449 0450 0451 0452 0748 0749 0750 0751 0752 1048 1049 1050 1051 1052 3148 3149 3150 3151 3152 3448 3449 3450 3451 3452 3748 3749 3750 3751 3752 4048 4049 4050 4051 4052 270 330 330 390 470 K K M K K CKR22BX471M_ CKR22BX561K_ CKR22BX681K_ CKR22BX681M_ CKR22BX821K_ 0153 0154 0155 0156 0157 0453 0454 0455 0456 0457 0753 0754 0755 0756 0757 1053 1054 1055 1056 1057 3153 3154 3155 3156 3157 3453 3454 3455 3456 3457 3753 3754 3755 3756 3757 4053 4054 4055 4056 4057 470 560 680 680 820 M K K M K CKR22BX102K_ CKR22BX102M_ CKR22BX122K_ CKR22BX152K_ CKR22BX152M_ CKR22BX182K_ CKR22BX222K_ CKR22BX222M_ CKR22BX272K_ CKR22BX332K_ CKR22BX332M_ CKR22BX392K_ CKR22BX472K_ CKR22BX472M_ CKR22BX562K_ 0158 0159 0160 0161 0162 0163 0164 0165 0166 0167 0168 0169 0170 0171 0172 0458 0459 0460 0461 0462 0463 0464 0465 0466 0467 0468 0469 0470 0471 0472 0758 0759 0760 0761 0762 0763 0764 0765 0766 0767 0768 0769 0770 0771 0772 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3458 3459 3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772 4058 4059 4060 4061 4062 4063 4064 4065 4066 4067 4068 4069 4070 4071 4072 1,000 1,000 1,200 1,500 1,500 1,800 2,200 2,200 2,700 3,300 3,300 3,900 4,700 4,700 5,600 K M K K M K K M K K M K K M K CKR22BX682K_ CKR22BX682M_ CKR22BX822K_ CKR22BX103K_ CKR22BX103M_ CKR22BX123K_ CKR22BX153K_ CKR22BX153M_ CKR22BX183K_ CKR22BX223K_ CKR22BX223M_ CKR22BX273K_ CKR22BX333K_ CKR22BX333M_ CKR22BX393K_ CKR22BX473K_ CKR22BX473M_ CKR22BX563K_ CKR22BX683K_ CKR22BX683M_ CKR22BX823K_ CKR22BX104K_ CKR22BX104M_ 0173 0174 0175 0176 0177 0178 0179 0180 0181 0182 0183 0184 0185 0186 0187 0188 0189 0190 0191 0192 0193 0194 0195 0473 0474 0475 0476 0477 0478 0479 0480 0481 0482 0483 0484 0485 0486 0487 0488 0489 0490 0491 0492 0493 0494 0495 0773 0774 0775 0776 0777 0778 0779 0780 0781 0782 0783 0784 0785 0786 0787 0788 0789 0790 0791 0792 0793 0794 0795 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3773 3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784 3785 3786 3787 3788 3789 3790 3791 3792 3793 3794 3795 4073 4074 4075 4076 4077 4078 4079 4080 4081 4082 4083 4084 4085 4086 4087 4088 4089 4090 4091 4092 4093 4094 4095 6,800 6,800 8,200 10,000 10,000 12,000 15,000 15,000 18,000 22,000 22,000 27,000 33,000 33,000 39,000 47,000 47,000 56,000 68,000 68,000 82,000 100,000 100,000 K M K K M K K M K K M K K M K K M K K M K K M Add appropriate failure rate level letter (M, P, R or S) 50 200 200 100 100 50 50 MIL-C-39014/2Pin DIP MILITARY DASH NUMBER IDENTIFICATION CKR23 to MIL-C-39014/22 (Dash Number From Table) Military Type Designation Failure Rate Level (%/1,000 Hours) Standard Lead Length Optional Longer Lead Length 1.0 (M) 0.1 (P) 0258 0259 0260 0261 0262 0263 0264 0265 0266 0267 0268 0269 0270 0271 0272 0273 0274 0275 0276 0277 0278 0279 0280 0281 0282 0283 0284 0285 0286 0287 0288 0289 0290 0291 0292 0293 0558 0559 0560 0561 0562 0563 0564 0565 0566 0567 0568 0569 0570 0571 0572 0573 0574 0575 0576 0577 0578 0579 0580 0581 0582 0583 0584 0585 0586 0587 0588 0589 0590 0591 0592 0593 0.01 (R) 0.001 (S) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) Capacitance (pF) Capacitance Tolerance WVDC Style CKR23, Voltage-temperature limits of 0 60 ppm/C CKR23CG561F_ CKR23CG561J_ CKR23CG561K_ CKR23CG681F_ CKR23CG681J_ CKR23CG681K_ CKR23CG821F_ CKR23CG821J_ CKR23CG821K_ CKR23CG102F_ CKR23CG102J_ CKR23CG102K_ CKR23CG122F_ CKR23CG122J_ CKR23CG122K_ CKR23CG272F_ CKR23CG272J_ CKR23CG272K_ CKR23CG332F_ CKR23CG332J_ CKR23CG332K_ CKR23CG472F_ CKR23CG472J_ CKR23CG472K_ CKR23CG562F_ CKR23CG562J_ CKR23CG562K_ CKR23CG682F_ CKR23CG682J_ CKR23CG682K_ CKR23CG822F_ CKR23CG822J CKR23CG822K_ CKR23CG103F_ CKR23CG103J_ CKR23CG103K_ CKR23BX102K_ CKR23BX102M_ CKR23BX122K_ CKR23BX152K_ CKR23BX152M_ CKR23BX182K_ CKR23BX222K_ CKR23BX222M_ CKR23BX272K_ CKR23BX332K_ CKR23BX332M_ CKR23BX392K_ CKR23BX472K_ CKR23BX472M_ CKR23BX562K_ CKR23BX682K_ CKR23BX682M_ CKR23BX822K_ CKR23BX103K_ CKR23BX103M_ CKR23BX123K_ CKR23BX153K_ CKR23BX153M_ CKR23BX183K_ CKR23BX223K_ CKR23BX223M_ CKR23BX273K_ CKR23BX333K_ CKR23BX333M_ CKR23BX393K_ CKR23BX473K_ CKR23BX473M_ CKR23BX563K_ CKR23BX683K_ CKR23BX683M_ CKR23BX823K_ CKR23BX104K_ CKR23BX104M_ CKR23BX124K_ CKR23BX154K_ CKR23BX154M_ CKR23BX184K_ CKR23BX224K_ CKR23BX224M_ 0196 0197 0198 0199 0200 0201 0202 0203 0204 0205 0206 0207 0208 0209 0210 0211 0212 0213 0214 0215 0216 0217 0218 0219 0220 0221 0222 0223 0224 0225 0226 0227 0228 0229 0230 0231 0232 0233 0234 0235 0236 0237 0238 0239 0858 0859 0860 0861 0862 0863 0864 0865 0866 0867 0868 0869 0870 0871 0872 0873 0874 0875 0876 0877 0878 0879 0880 0881 0882 0883 0884 0885 0886 0887 0888 0889 0890 0891 0892 0893 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3558 3559 3560 3561 3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574 3575 3576 3577 3578 3579 3580 3581 3582 3583 3584 3585 3586 3587 3588 3589 3590 3591 3592 3593 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892 3893 4158 4159 4160 4161 4162 4163 4164 4165 4166 4167 4168 4169 4170 4171 4172 4173 4174 4175 4176 4177 4178 4179 4180 4181 4182 4183 4184 4185 4186 4187 4188 4189 4190 4191 4192 4193 560 560 560 680 680 680 820 820 820 1,000 1,000 1,000 1,200 1,200 1,200 2,700 2,700 2,700 3,300 3,300 3,300 4,700 4,700 4,700 5,600 5,600 5,600 6,800 6,800 6,800 8,200 8,200 8,200 10,000 10,000 10,000 Style CKR23, voltage-temperature limits of 15% (+15%, -25% for Rated Voltage) 0496 0796 1096 3196 3496 3796 4096 1,000 0497 0797 1097 3197 3497 3797 4097 1,000 0498 0798 1098 3198 3498 3798 4098 1,200 0499 0799 1099 3199 3499 3799 4099 1,500 0500 0800 1100 3200 3500 3800 4100 1,500 0501 0801 1101 3201 3501 3801 4101 1,800 0502 0802 1102 3202 3502 3802 4102 2,200 0503 0803 1103 3203 3503 3803 4103 2,200 0504 0804 1104 3204 3504 3804 4104 2,700 0505 0805 1105 3205 3505 3805 4105 3,300 0506 0806 1106 3206 3506 3806 4106 3,300 0507 0807 1107 3207 3507 3807 4107 3,900 0508 0808 1108 3208 3508 3808 4108 4,700 0509 0809 1109 3209 3509 3809 4109 4,700 0510 0810 1110 3210 3510 3810 4110 5,600 0511 0811 1111 3211 3511 3811 4111 6,800 0512 0812 1112 3212 3512 3812 4112 6,800 0513 0813 1113 3213 3513 3813 4113 8,200 0514 0814 1114 3214 3514 3814 4114 10,000 0515 0815 1115 3215 3515 3815 4115 10,000 0516 0816 1116 3216 3516 3816 4116 12,000 0517 0817 1117 3217 3517 3817 4117 15,000 0518 0818 1118 3218 3518 3818 4118 15,000 0519 0819 1119 3219 3519 3819 4119 18,000 0520 0820 1120 3220 3520 3820 4120 22,000 0521 0821 1121 3221 3521 3821 4121 22,000 0522 0822 1122 3222 3522 3822 4122 27,000 0523 0823 1123 3223 3523 3823 4123 33,000 0524 0824 1124 3224 3524 3824 4124 33,000 0525 0825 1125 3225 3525 3825 4125 39,000 0526 0826 1126 3226 3526 3826 4126 47,000 0527 0827 1127 3227 3527 3827 4127 47,000 0528 0828 1128 3228 3528 3828 4128 56,000 0529 0829 1129 3229 3529 3829 4129 68,000 0530 0830 1130 3230 3530 3830 4130 68,000 0531 0831 1131 3231 3531 3831 4131 82,000 0532 0832 1132 3232 3532 3832 4132 100,000 0533 0833 1133 3233 3533 3833 4133 100,000 0534 0834 1134 3234 3534 3834 4134 120,000 0535 0835 1135 3235 3535 3835 4135 150,000 0536 0836 1136 3236 3536 3836 4136 150,000 0537 0837 1137 3237 3537 3837 4137 180,000 0538 0838 1138 3238 3538 3838 4138 220,000 0539 0839 1139 3239 3539 3839 4139 220,000 Add appropriate failure rate level letter (M, P, R or S) 51 F J K F J K F J K F J K F J K F J K F J K F J K F J K F J K F J K F J K 200 K M K K M K K M K K M K K M K K M K K M K K M K K M K K M K K M K K M K K M K K M K K M 200 200 100 100 50 50 200 100 100 50 50 MIL-C-39014/2Pin DIP MILITARY DASH NUMBER IDENTIFICATION CKR24 to MIL-C-39014/22 (Dash Number From Table) Military Type Designation Failure Rate Level (%/1,000 Hours) Standard Lead Length Optional Longer Lead Length 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) Capacitance (pF) Capacitance Tolerance WVDC Style CKR24, Voltage-temperature limits of 15% (+15%, -40% for Rated Voltage) CKR24BR124K_ CKR24BR154K_ CKR24BR154M_ CKR24BR184K_ CKR24BR224K_ 0240 0241 0242 0243 0244 0540 0541 0542 0543 0544 0840 0841 0842 0843 0844 1140 1141 1142 1143 1144 3240 3241 3242 3243 3244 3540 3541 3542 3543 3544 3840 3841 3842 3843 3844 4140 4141 4142 4143 4144 120,000 150,000 150,000 180,000 220,000 K K M K K CKR24BR224M_ CKR24BR274K_ CKR24BR334K_ CKR24BR334M_ CKR24BR394K_ 0245 0246 0247 0248 0249 0545 0546 0547 0548 0549 0845 0846 0847 0848 0849 1145 1146 1147 1148 1149 3245 3246 3247 3248 3249 3545 3546 3547 3548 3549 3845 3846 3847 3848 3849 4145 4146 4147 4148 4149 220,000 270,000 330,000 330,000 390,000 M K K M K CKR24BR474K_ CKR24BR474M_ CKR24BR564K_ CKR24BR684K_ CKR24BR684M_ CKR24BR824K_ CKR24BR105K_ CKR24BR105M_ 0250 0251 0252 0253 0254 0255 0256 0257 0550 0551 0552 0553 0554 0555 0556 0557 0850 0851 0852 0853 0854 0855 0856 0857 1150 1151 1152 1153 1154 1155 1156 1157 3250 3251 3252 3253 3254 3255 3256 3257 3550 3551 3552 3553 3554 3555 3556 3557 3850 3851 3852 3853 3854 3855 3856 3857 4150 4151 4152 4153 4154 4155 4156 4157 470,000 470,000 560,000 680,000 680,000 820,000 1,000,000 1,000,000 K M K K M K K M Add appropriate failure rate level letter (M, P, R or S) 00 01 A 91 0 MARKING Date Code (year and week) Trademark 4-Digit Dash Number 52 100 100 100 50 50 MIL-C-11015/Radial Leads HOW TO ORDER Military Type Designation: Styles CK05, CK06 For values, tolerances, voltages, sizes, configurations and dielectrics not shown, contact AVX facilities directly for information. Part Number Example CK05 BX 104 K Style Voltage-Temperature Limits Capacitance Code Capacitance Tolerance MIL Part No. Codes W L.D. Style: CK = General purpose, ceramic dielectric, fixed capacitors. 05 = Remaining two numbers identify shape and dimension. T Figure 1 L L.S. 1.250 Min. Voltage-Temperature Limits: First letter identifies temperature range. B = -55C to +125C W L.D. L.S. L Figure 2 Second letter identifies voltage-temperature coefficient. 1.250 Min. Capacitance Change with Reference to 25C Second Letter No Voltage Rated Voltage X +15, -15% +15, -25% SIZE SPECIFICATIONS Dimensions: Millimeters (Inches) Sig. Fig. Capacitance and Multiplier: First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. Capacitance Tolerances: K = 10%, M = 20% Packaging: CK05 1000 per bag CK06 1000 per bag Radial tape and reel packaging available upon request (2500 pcs./reel). Case Size MIL-C-11015 CK05 (Fig. 1) CK06 (Fig. 2) Length (L) 4.83.25 (.190.010) 4.83.25 (.190.010) 7.37.25 (.290.010) 7.37.25 (.290.010) Thickness (T) 2.29.25 (.090.010) 2.29.25 (.090.010) Lead Spacing (L.S.) Lead Diameter (L.D.) 5.08.38 (.200.015) .64.05 (.025.002) 5.08.38 (.200.015) .64.05 (.025.002) Width (W) 53 Per MIL Spec MIL-C-11015/Radial Leads Military Part Number Identification CK05 and CK06 Military Type Designation Capacitance Capacitance (pF) Tolerance Military Type Designation WVDC Capacitance Capacitance (pF) Tolerance CK05BX100_ CK05BX120K_ CK05BX150_ CK05BX180K_ CK05BX220_ CK05BX270K_ CK05BX330_ CK05BX390K_ CK05BX470_ CK05BX560K_ CK05BX680_ CK05BX820K_ CK05BX101_ CK05BX121K_ CK05BX151_ CK05BX181K_ CK05BX221_ CK05BX271K_ CK05BX331_ CK05BX391K_ CK05BX471_ CK05BX561K_ CK05BX681_ CK05BX821K_ CK05BX102_ CK05BX122_ CK05BX152_ CK05BX182K_ CK05BX222_ CK05BX272K_ CK05BX332_ CK05BX392K_ CK05BX472_ CK05BX562K_ CK05BX682_ CK05BX822K_ CK05BX103_ CK05BX123K_ CK05BX153_ CK05BX183K_ CK05BX223_ CK05BX273K_ CK05BX333_ CK05BX393K_ CK05BX473_ CK05BX563K_ CK05BX683_ CK05BX823K_ CK05BX104_ 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M WVDC CK06 (BX) CK05 (BX) CK06BX122K_ CK06BX152_ CK06BX182K_ CK06BX222_ CK06BX272K_ CK06BX332_ CK06BX392K_ CK06BX472_ CK06BX562K_ CK06BX682_ CK06BX822K_ CK06BX103_ CK06BX123K_ CK06BX153_ CK06BX183K_ CK06BX223_ CK06BX273K_ CK06BX333_ CK06BX393K_ CK06BX473_ CK06BX563K_ CK06BX683_ CK06BX823K_ CK06BX104_ CK06BX124K_ CK06BX154_ CK06BX184K_ CK06BX224_ CK06BX274K_ CK06BX334_ CK06BX394K_ CK06BX474_ CK06BX564K_ CK06BX684_ CK06BX824K_ CK06BX105_ 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 820,000 1.0 mfd K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M Add Capacitance Tolerance Letter K = 10% or M = 20% Add Capacitance Tolerance Letter K = 10% or M = 20% MARKING CK05/CK06 Front CK05 BX 103K 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 Back Style Temperature Characteristic Capacitance Value (3 digit code) and Capacitance Tolerance 54 100V AAAY 9910 Voltage Rating A for AVX; Plant I.D. (X); Lot Code (XX) Date Code MIL-C-11015/Axial Leads HOW TO ORDER Military Type Designation: Styles CK12, CK13, CK14, CK15, CK16 Part Number Example Style CK12 BX 103 K Voltage-Temperature Limits Capacitance Code Capacitance Tolerance MIL Part No. Codes 1.25 MIN. L Style: CK = general purpose, ceramic dielectric, fixed capacitors. 12 = Remaining two numbers identify shape and dimension. D L.D. Voltage-Temperature Limits: First letter identifies temperature range. B = -55C to +125C Second letter identifies voltage-temperature coefficient. SIZE SPECIFICATIONS Capacitance Change with Reference to 25C Second Letter No Voltage Rated Voltage R +15, -15% +15, -40% X +15, -15% +15, -25% Dimensions: Millimeters (Inches) Case Size Sig. Fig. Capacitance and Multiplier: First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 10,000 pF as 103. Capacitance Tolerances: K = 10%, M = 20% MIL-C-11015 Length (L) Diameter (D) Lead Diameter (L.D.) PACKAGING REQUIREMENTS Packaging: Bulk CK12, 13 & 14 CK15 & 16 Tape & Reel CK12, 13 CK14 CK15 CK16 100 pcs per bag 50 pcs per bag 5000 pcs per reel 3000 pcs per reel 950 pcs per reel 650 pcs per reel 55 Per MIL Spec CK12 CK13 CK14 4.07.25 6.35.25 9.91.25 (.160.010) (.250.010) (.390.010) 2.29.25 2.29.25 3.56.25 (.090.010) (.090.010) (.140.010) CK15 CK16 12.7.51 17.53.51 (.500.020) (.690.020) 6.35.38 8.89.51 (.250.015) (.350.020) .48.05 .48.05 .63.05 .63.05 .63.05 (.019.002) (.019.002) (.025.002) (.025.002) (.025.002) MIL-C-11015/Axial Leads Military Part Number Identification CK12 thru CK16 Military Type Designation Capacitance Capacitance (pF) Tolerance Military Type Designation WVDC Capacitance Capacitance (pF) Tolerance CK12BX100_ CK12BX120K CK12BX150_ CK12BX180K CK12BX220_ CK12BX270K CK12BX330_ CK12BX390K CK12BX470_ CK12BX560K CK12BX680_ CK12BX820K CK12BX101_ CK12BX121K CK12BX151_ CK12BX181K CK12BX221_ CK12BX271K CK12BX331_ CK12BX391K CK12BX471_ CK12BX561K CK12BX681_ CK12BX821K CK12BX102_ CK12BX122K CK12BX152_ CK12BX182K CK12BX222_ CK12BX272K CK12BX332_ CK12BX392K CK12BX472_ CK12BX562K CK12BX682_ CK12BX822K CK12BX103_ 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 CK13BX562K CK13BX682_ CK13BX822K CK13BX103_ CK13BX123K CK13BX153_ CK13BX183K CK13BX223_ 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 CK14BX123K CK14BX153_ CK14BX183K CK14BX223_ CK14BX273K CK14BX333_ CK14BX393K CK14BX473_ 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 CK14BR563K CK14BR683_ CK14BR823K CK14BR104_ CK14BR124K CK14BR154_ CK14BR184K CK14BR224_ CK14BR274K 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 CK14 (BR) K K, M K K, M K K, M K K, M K 100 100 100 100 50 50 50 50 50 CK15BX104K 100,000 CK15 (BX) K, M 100 CK15BR124K CK15BR154_ CK15BR184K CK15BR224_ CK15BR274K CK15BR334_ CK15BR474K CK15BR105_ 120,000 150,000 180,000 220,000 270,000 330,000 470,000 1,000,000 CK15 (BR) K K, M K K, M K K, M K, M K, M 100 100 100 100 100 100 50 50 CK16BR474K CK16BR105_ CK16BR225_ CK16BR335_ 470,000 1,000,000 2,200,000 3,300,000 CK16 (BR) K, M K, M K, M K, M 100 100 50 50 CK13 (BX) K K, M K K, M K K, M K K, M WVDC CK14 (BX) CK12 (BX) K K, M K K, M K K, M K K, M 100 100 100 100 100 100 100 100 Add Capacitance Tolerance Letter K = 10% or M = 20% 100 100 100 100 50 50 50 50 CK13 (BR) CK13BR273K CK13BR333_ CK13BR393K CK13BR473_ 27,000 33,000 39,000 47,000 K K, M K K, M 50 50 50 50 Add Capacitance Tolerance Letter K = 10% or M = 20% MARKING CK14, CK15, CK16 CK12/CK13 CK12 BX 103K 9910 AVX Style Temperature Characteristic Capacitance Value (3 digit code) and Cap. Tolerance Date Code Mfg. I.D. Code CK14BR 104K 9910 AVX 56 Style and Temp. Characteristic Capacitance Value and Cap. Tolerance Date Code Mfg. I.D. Code MIL-C-20/Radial Leads HOW TO ORDER Military Type Designation: Established Reliability = CCR05, CCR06, CCR07, CCR08, CCR09 Non-Established Reliability = CC05, CC06, CC07, CC08, CC09 Part Number Example Style CCR06 CG Temperature Characteristic Capacitance Code Capacitance Tolerance Military Failure Rate Stand-off Option MIL Part No. Codes 183 J R Figure 1 Style: CC = Identifies temperature compensating, ceramic dielectric, fixed capacitors. R = Identifies Established Reliability parts. 06 = Numbers identify shape and dimension. Temperature Characteristic: (V) Figure 2 W T W L.D. L.S. L L.D. L L.S. T L T L Permissible capacitance change from capacitance at +25C in ppm/C Temp. Characteristic CX +125C 1/ -55C 2/ 1/ CK 250 ppm/C 120 ppm/C +246.25 -326.25 +116.25 -166.25 W W CJ CH CG 60 ppm/C 30 ppm/C +55.00 -91.25 +27.50 -53.75 1/ Not practically measurable. 2/ The ppm/C values for -55C were calculated by dividing ppm by negative 80C. 1.250 Min. L.D. 1.250 Min. L.S. L.D. L.S. Figure 4 Figure 3 Capacitance Code: First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 18,000 pF as 183. (For values below 10 pF, use "R" in place of decimal point, e.g., 1R4 = 1.4pF). Capacitance Tolerance: C = 0.25 pF, D = 0.5 pF, F = 1%, G = 2%, J = 5%, K = 10% Military Failure Rate: M = 1% per 1000 hours, P = 0.1% per 1000 hours, R = 0.01% per 1000 hours, S = 0.001% per 1000 hours. To order stand-off option, place "V" at the end of the part number. For example: CCR05CG332FSV. SIZE SPECIFICATIONS Per MIL Spec MIL-C-20 PACKAGING REQUIREMENTS Packaging: CCR0X: 100 pcs/bag; CC0X: 1000 pcs/bag Dimensions: Millimeters (Inches) Case Size Width (W) 4.83.25 (.190.010) 7.37.25 (.290.010) 12.19.51 (.480.020) 12.19.51 (.480.020) Thickness (T) 2.29.25 (.090.010) 2.29.25 (.090.010) 3.56.25 (.140.010) 6.1.25 (.240.010) Lead Spacing (L.S.) 5.08.38 (.200.015) 5.08.38 (.200.015) 10.16.51 (.400.020) 10.16.51 (.400.020) Lead Diameter (L.D.) .64.05 (.025.002) .64.05 (.025.002) .64.05 (.025.002) .64.05 (.025.002) CCR05/CC05 Figures 1, 4 CCR06/CC06 Figures 2, 3 CCR07/CC07 Figure 2 CCR08/CC08 Figure 2 Length (L) 4.83.25 (.190.010) 7.37.25 (.290.010) 12.19.51 (.480.020) 12.19.51 (.480.020) CCR09/CC09 Figure 2 4.83.25 4.83.25 2.29.25 2.54.38 .64.05 (.190.010) (.190.010) (.090.010) (.100.015) (.025.002) MILITARY PART NUMBER IDENTIFICATION Military Type Designation Capacitance (pF) Capacitance Tolerance Military Type Designation WVDC Capacitance (pF) CC05-CCR05, CC09-CCR09 CCR05CX1R0_ CCR05CX1R1_ CCR05CX1R2_ CCR05CX1R3_ CCR05CX1R5_ CCR05CX1R6_ CCR05CX1R8_ CCR05CX2R0_ CCR05CK2R2_ CCR05CK2R4_ CCR05CK2R7_ CCR05CK3R0_ CCR05CK3R3_ CCR05CK3R6_ CCR05CK3R9_ 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 C C C C C C C C C C C, D C, D C, D C, D C, D Capacitance Tolerance WVDC CC05-CCR05, CC09-CCR09 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 CCR05CJ4R3_ CCR05CJ4R7_ CCR05CJ5R1_ CCR05CJ5R6_ CCR05CJ6R2_ CCR05CJ6R8_ CCR05CJ7R5_ CCR05CH8R2_ CCR05CH9R1_ CCR05CH100_ CCR05CH110_ CCR05CH120_ CCR05CH130_ CCR05CH150_ CCR05CH160_ Add appropriate failure rate level (M, P, R, or S), add V for Stand-off Add appropriate cap. tolerance letter 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 C, D C, D C, D C, D C, D C, D C, D C, D C, D G, J G, J G, J G, J G, J G, J 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 Add appropriate failure rate level (M, P, R, or S), add V for Stand-off Add appropriate cap. tolerance letter 57 MIL-C-20/Radial Leads Military Part Number Identification Military Type Designation Capacitance Capacitance (pF) Tolerance Military Type Designation WVDC Capacitance Capacitance (pF) Tolerance CCR05CH180_ CCR05CG200_ CCR05CG220_ CCR05CG240_ CCR05CG270_ CCR05CG300_ CCR05CG330_ CCR05CG360_ CCR05CG390_ CCR05CG430_ CCR05CG470_ CCR05CG510_ CCR05CG560_ CCR05CG620_ CCR05CG680_ CCR05CG750_ CCR05CG820_ CCR05CG910_ CCR05CG101_ CCR05CG111_ CCR05CG121_ CCR05CG131_ CCR05CG151_ CCR05CG161_ CCR05CG181_ CCR05CG201_ CCR05CG221_ CCR05CG241_ CCR05CG271_ CCR05CG301_ CCR05CG331_ CCR05CG361_ CCR05CG391_ CCR05CG431_ CCR05CG471_ CCR05CG511_ CCR05CG561_ CCR05CG621_ CCR05CG681_ CCR05CG751_ CCR05CG821_ CCR05CG911_ CCR05CG102_ CCR05CG112_ CCR05CG122_ CCR05CG132_ CCR05CG152_ CCR05CG162_ CCR05CG182_ CCR05CG202_ CCR05CG222_ CCR05CG242_ CCR05CG272_ CCR05CG302_ CCR05CG332_ 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1,000 1,100 1,200 1,300 1,500 1,600 1,800 2,000 2,200 2,400 2,700 3,000 3,300 G, J G, J G, J G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 360 390 430 470 510 560 620 680 750 820 F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J CCR06CG911_ CCR06CG102_ CCR06CG112_ CCR06CG122_ CCR06CG132_ CCR06CG152_ CCR06CG162_ CCR06CG182_ CCR06CG202_ CCR06CG222_ CCR06CG242_ CCR06CG272_ CCR06CG302_ CCR06CG332_ CCR06CG362_ CCR06CG392_ CCR06CG432_ CCR06CG472_ CCR06CG512_ CCR06CG562_ CCR06CG622_ CCR06CG682_ CCR06CG752_ CCR06CG822_ CCR06CG912_ CCR06CG103_ CCR06CG123_ CCR06CG153_ CCR06CG183_ 910 1,000 1,100 1,200 1,300 1,500 1,600 1,800 2,000 2,200 2,400 2,700 3,000 3,300 3,600 3,900 4,300 4,700 5,100 5,600 6,200 6,800 7,500 8,200 9,100 10,000 12,000 15,000 18,000 CCR07CG222_ CCR07CG272_ CCR07CG332_ CCR07CG392_ CCR07CG472_ CCR07CG562_ CCR07CG682_ CCR07CG822_ CCR07CG103_ CCR07CG123_ CCR07CG153_ CCR07CG183_ CCR07CG223_ CCR07CG273_ CCR07CG333_ CCR07CG393_ CCR07CG473_ CCR07CG563_ CCR07CG683_ CCR07CG823_ CCR07CG104_ 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 CCR08CG392_ CCR08CG472_ CCR08CG153_ CCR08CG183_ CCR08CG563_ CCR08CG683_ 3,900 4,700 15,000 18,000 56,000 68,000 F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 CC07, CCR07 F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K 200 200 200 200 200 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 CC08, CCR08 CC06, CCR06 CCR06CG361_ CCR06CG391 CCR06CG431_ CCR06CG471_ CCR06CG511_ CCR06CG561_ CCR06CG621_ CCR06CG681_ CCR06CG751_ CCR06CG821_ WVDC CC06, CCR06 (cont) CC05-CCR05, CC09-CCR09 200 200 200 200 200 200 200 200 200 200 G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K 200 200 100 100 50 50 Add appropriate failure rate level (M, P, R or S) Add appropriate cap. tolerance letter Add appropriate failure rate level (M, P, R or S) Add appropriate cap. tolerance letter Note: For marking information, see page 63. 58 MIL-C-20/Axial Leads HOW TO ORDER Military Type Designation: Established Reliability = CCR75, CCR76, CCR77, CCR78, CCR79 Non-Established Reliability = CC75, CC76, CC77, CC78, CC79 Part Number Example CCR76 CG 102 J R Style Temperature Characteristic Capacitance Code Capacitance Tolerance Military Failure Rate MIL Part No. Codes L 1.25 MIN. D L.D. Style: CC = Identifies temperature compensating, ceramic dielectric, fixed capacitors. R = Identifies Established Reliability parts. 76 = Numbers identify shape and dimension. Temperature Characteristic: SIZE SPECIFICATIONS Permissible capacitance change from capacitance at +25C in ppm/C Temp. Characteristic CX +125C -55C 2/ 1/ 1/ CK 250 ppm/C 120 ppm/C +246.25 -326.25 Dimensions: Millimeters (Inches) CJ +116.25 -166.25 CH CG 60 ppm/C 30 ppm/C +55.00 -91.25 +27.50 -53.75 Per MIL Spec Case Size MIL-C-20 Length (L) Diameter (D) Lead Diameter (L.D.) CCR75 CC75 4.07.25 (.160.010) 2.29.25 (.090.010) .48.05 (.019.002) CCR76 CC76 6.35.25 (.250.010) 2.29.25 (.090.010) .48.05 (.019.002) CCR77 CC77 9.91.25 (.390.010) 3.56.25 (.140.010) .63.05 (.025.002) CCR78 CC78 12.7.51 (.500.020) 6.35.38 (.250.015) .63.05 (.025.002) CCR79 CC79 17.53.51 (.690.020) 8.89.51 (.350.020) .63.05 (.025.002) 1/ Not practically measurable. Capacitance Code: First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 1,000 pF as 102. (For values below 10 pF, use "R" in place of decimal point, e.g., 1R8 - 1.8pF). Capacitance Tolerance: C = 0.25 pF, D = 0.5 pF, F = 1%, G = 2%, J = 5%, K = 10% Military Failure Rate: M = 1% per 1000 hours, P = 0.1% per 1000 hours, R = 0.01% per 1000 hours, S = 0.001% per 1000 hours. PACKAGING REQUIREMENTS Packaging: Bulk CCR75/CC75, CCR76/CC76, CCR77/CC77, CCR78/CC78, CCR79/CC79 Tape & Reel CCR75/CC75, CCR76/CC76 CCR77/CC77 CCR78/CC78 CCR79/CC79 100 pcs/bag 50 pcs/bag 59 5000 pcs/reel 3000 pcs/reel 950 pcs/reel 650 pcs/reel MIL-C-20/Axial Leads Military Part Number Identification CC75 thru CC79 and CCR75 thru CCR79 Military Type Designation Capacitance Capacitance (pF) Tolerance Military Type Designation WVDC Capacitance Capacitance (pF) Tolerance CC75-CCR75 CCR75CX1R0_ CCR75CX1R1_ CCR75CX1R2_ CCR75CX1R3_ CCR75CX1R5_ CCR75CX1R6_ CCR75CX1R8_ CCR75CX2R0_ CCR75CK2R2_ CCR75CK2R4_ CCR75CK2R7_ CCR75CK3R0_ CCR75CK3R3_ CCR75CK3R6_ CCR75CK3R9_ CCR75CJ4R3_ CCR75CJ4R7_ CCR75CJ5R1_ CCR75CJ5R6_ CCR75CJ6R2_ CCR75CJ6R8_ CCR75CJ7R5_ CCR75CH8R2_ CCR75CH9R1_ CCR75CH100_ CCR75CH110_ CCR75CH120_ CCR75CH130_ CCR75CH150_ CCR75CH160_ CCR75CH180_ CCR75CG200_ CCR75CG220_ CCR75CG240_ CCR75CG270_ CCR75CG300_ 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 C C C C C C C C C C C, D C, D C, D C, D C, D C, D C, D C, D C, D C, D C, D C, D C, D C, D G, J G, J G, J G, J G, J G, J G, J F, G, J F, G, J F, G, J F, G, J F, G, J WVDC CC75-CCR75 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 CCR75CG330_ CCR75CG360_ CCR75CG390_ CCR75CG430_ CCR75CG470_ CCR75CG510_ CCR75CG560_ CCR75CG620_ CCR75CG680_ CCR75CG750_ CCR75CG820_ CCR75CG910_ CCR75CG101_ CCR75CG111_ CCR75CG121_ CCR75CG131_ CCR75CG151 CCR75CG161_ CCR75CG181_ CCR75CG201_ CCR75CG221_ CCR75CG241_ CCR75CG271_ CCR75CG301_ CCR75CG331_ CCR75CG361_ CCR75CG391_ CCR75CG431_ CCR75CG471_ CCR75CG511_ CCR75CG561_ CCR75CG621_ CCR75CG681_ 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 Add appropriate failure rate level (M, P, R or S) Add appropriate cap. tolerance letter Add appropriate failure rate level (M, P, R or S) Add appropriate cap. tolerance letter Note: For marking information, see page 63. 60 MIL-C-20/Axial Leads Military Part Number Identification CC75 thru CC79 and CCR75 thru CCR79 Military Type Designation Capacitance Capacitance (pF) Tolerance Military Type Designation WVDC Capacitance Capacitance (pF) Tolerance CC76, CCR76 CCR76CG820_ CCR76CG910_ CCR76CG101_ CCR76CG111_ CCR76CG121_ CCR76CG131_ CCR76CG271_ CCR76CG301_ CCR76CG331_ CCR76CG361_ CCR76CG391_ CCR76CG431_ CCR76CG471_ CCR76CG511_ CCR76CG561_ CCR76CG621_ CCR76CG681_ CCR76CG751_ CCR76CG821_ CCR76CG911_ CCR76CG102_ 82 91 100 110 120 130 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1,000 CCR77CG151_ CCR77CG161_ CCR77CG181_ CCR77CG201_ CCR77CG221_ CCR77CG241_ CCR77CG271_ CCR77CG301_ CCR77CG331_ CCR77CG361_ CCR77CG391_ CCR77CG431_ CCR77CG471_ CCR77CG511_ CCR77CG561_ CCR77CG621_ CCR77CG681_ CCR77CG751_ CCR77CG821_ CCR77CG911_ CCR77CG102_ CCR77CG112_ CCR77CG122_ CCR77CG132_ CCR77CG152_ CCR77CG162_ CCR77CG182_ CCR77CG202_ CCR77CG222_ CCR77CG242_ CCR77CG272_ 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1,000 1,100 1,200 1,300 1,500 1,600 1,800 2,000 2,200 2,400 2,700 F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 CCR77CG302_ CCR77CG332_ CCR77CG362_ CCR77CG392_ CCR77CG432_ CCR77CG472_ CCR77CG512_ CCR77CG562_ 3,000 3,300 3,600 3,900 4,300 4,700 5,100 5,600 CCR78CG821_ CCR78CG102_ CCR78CG122_ CCR78CG152_ CCR78CG182_ CCR78CG222_ CCR78CG272_ CCR78CG332_ CCR78CG392_ CCR78CG472_ CCR78CG562_ CCR78CG682_ CCR78CG822_ CCR78CG103_ CCR78CG123_ CCR78CG153_ CCR78CG183_ CCR78CG223_ CCR78CG273_ 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 CCR79CG392_ CCR79CG472_ CCR79CG562_ CCR79CG682_ CCR79CG822_ CCR79CG103_ CCR79CG153_ CCR79CG183_ CCR79CG223_ CCR79CG273_ CCR79CG333_ CCR79CG393_ CCR79CG473_ CCR79CG563_ CCR79CG683_ CCR79CG823_ 3,900 4,700 5,600 6,800 8,200 10,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J, K F, G, J, K 50 50 50 50 50 50 50 50 CC78, CCR78 CC77, CCR77 F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J WVDC CC77, CCR77 (cont) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 50 50 F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 50 50 50 50 CC79, CCR79 F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K F, G, J, K 200 200 200 200 200 200 100 100 100 100 100 100 50 50 50 50 Add appropriate failure rate level (M, P, R or S) Add appropriate cap. tolerance letter Add appropriate failure rate level (M, P, R or S) Add appropriate cap. tolerance letter Note: Complete type designation will include the appropriate capacitance tolerance in the 11th digit. For CC styles, delete 3rd and 12th digits. Note: For marking information, see page 62. 61 MIL-C-20 MARKING Radials Axials CC05 & CC09 CC05 CH 100G 9910 A0 4222 FRONT BACK CC75, CC76 Date Code A=Lot Letter 0=1st Digit of AVX FSCM # 4222=Last four digits of AVX FSCM # CG 101 G99 10AAA CCR05 & CCR09 CCR0 5CH1 00GM 9910 AJ0 4222 FRONT BACK CCR75, CCR76 Date Code A=Lot Letter J="J" or "JAN" Brand 0=1st Digit of AVX FSCM # 4222=Last four digits of AVX FSCM # JCG 101 GM99 10AAA CC06 CC06 CG 102F 9910A 200V 04222 FRONT BACK Characteristic Capacitance Value Cap. Tolerance & 2 digit Year Code 2 digit Week, 2 digit Lot Code, A for AVX "J" Brand (J) and Characteristic (CG) Capacitance Value Cap. Tolerance (G) FR Level (M), & 2 digit Year Code 2 digit Week, A for AVX CC77 Date Code & Lot Letter 200V=Rated Voltage 04222=AVX FSCM # CC77C G151F 04222 9910AA Type Designation FSCM 4 digit Date Code, 2 digit Lot Code CCR06 CCR06 CG102 FM 9910A J200V 04222 FRONT BACK Date Code & Lot Letter J="J" or "JAN" Brand 200V=Rated Voltage 04222=AVX FSCM # CCR77 CCR77C G151FM JO4222 9910AA Type Designation "J" Brand and FSCM 4 digit Date Code, 2 digit Lot Code CC07 CG 103 G9 AAVX Characteristic Capacitance Value Cap. Tolerance & Year Code (9 for 1999) Lot Code & Trademark CC78, CC79 CCR07 JCG 103 GM9 AAVX "J" Brand (J) and Characteristic (CG) Capacitance Value Cap. Tolerance (G) FR Level (M), & Year Code (9 for 1999) Lot Code (A); and Trademark (AVX) Trademark or Manufacturer's Name Source Code (FSCM) Voltage, Date Code and Lot Symbol CCR08 CCR08CG 392KM JAN AVX 96095 200V 9910A "JAN" Brand & Trademark or Manufacturer's Name Source Code (FSCM) Voltage, Date Code and Lot Symbol 62 Type Designation Trademark or Manufacturer's Name Source Code (FSCM) Voltage 4 digit Date Code CCR78, CCR79 CCR78 CG 821KM JAN A 04222 200V 9910AA CC08 CC08CG 392K AVX 96095 200V 9910A CC78CG 821K AVX 04222 200V 9910AA Type Designation TC Capacitance Tolerance, Failure Rate "JAN" Brand, A for AVX FSCM Voltage 4 digit Date Code, 2 digit Lot Code MIL-C-123 HOW TO ORDER Military Type Designation: Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability Part Number Example M123 A 01 BX B 103 K C Mil-Spec Number Modification Spec. Slash Sheet Number Characteristic Temperature Voltage Capacitance Code Capacitance Tolerance Termination Part Number Codes Voltage-Temperature Limits: Rated Voltage: Capacitance change with reference to 25C over temperature range -55C to +125C Symbol Without Voltage With Rated DC Voltage BP BX 0 30 ppm/C +15, -15 percent 0 30 ppm/C +15, -25 percent Capacitance Tolerance: Rated Voltage Volts, DC Symbol B 50 100 C Symbol C D E J K Termination: Cap. Tolerance 0.25pF 0.5 pF 1% 5% 10% Lead Capacitors Symbol C W Termination Style Copper, solder coated (type C-4 or C-5 of MIL-STD-1276) Copper clad steel, solder coated, 60 micro inches minimum. CROSS REFERENCE MIL-SPEC TEST REQUIREMENTS TEST DESCRIPTION MIL-C-123 MIL-C-39014 MIL-C-20 MIL-C-55681 NDT (Non-Destructive Test) Pre-Cap Visual (Pre-Encapsulation Visual Examination) D.P.A. (Destructive Physical Analysis) Pre-Cap Terminal Strength (Pre-Encapsulation Pull Test) Life Test (Lot by Lot) Low Voltage Humidity Thermal Shock 100 Cycles 100% Ultrasonic Scan or Neutron-Radiography No No No 100% No No No Lot by Lot--Pre-Termination Lot by Lot--Finished Product No No No Lot by Lot No No No Lot by Lot--1000 Hours No No No Lot by Lot No No No Lot by Lot No No No 63 MIL-C-123/Radial Leads 4.83 0.254 (.190 0.010) MIL-C-123/STYLE CKS05, -/01 4.83 0.254 (.190 .010) CL Part Number 1/ M123A01BPC4R7_C M123A01BPC5R1_C M123A01BPC5R6_C M123A01BPC6R2_C M123A01BPC6R8_C M123A01BPC7R5_C M123A01BPC8R2_C M123A01BPC9R1_C M123A01BPC100_C M123A01BPC110_C M123A01BPC120_C M123A01BPC130_C M123A01BPC150_C M123A01BPC160_C M123A01BPC180_C M123A01BPC200_C M123A01BPC220_C M123A01BPC240_C M123A01BPC270_C M123A01BPC300_C M123A01BPC330_C M123A01BPC360_C M123A01BPC390_C M123A01BPC430_C M123A01BPC470_C M123A01BPC510_C M123A01BPC560_C M123A01BPC620_C M123A01BPC680_C M123A01BPC750_C M123A01BPC820_C M123A01BPC910_C M123A01BPC101_C M123A01BPC111_C M123A01BPC121_C M123A01BPC131_C M123A01BPC151_C M123A01BPC161_C M123A01BPC181_C M123A01BPC201_C M123A01BPC221_C M123A01BPC241_C Capacitance Capacitance VoltagepF Tolerance Temperature Limits 4.7 C, D BP 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 C, J, K 11 12 13 15 16 18 20 22 24 27 F, J, K 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 F, J, K BP BP Rated Voltage 2.29 0.254 (.090 0.010) 1.14 (.045) MAX. SEE NOTE 4 CKS05 2.54 .381 (.100 .015) 100 31.75 (1.25) MIN. .635 .051 (.025 .002) CL OF LEADS WITHIN .381 (.015) CL OF CASE 5.08 .381 (.200 .015) CKS06 7.37 0.254 (.290 0.010) 2.29 0.254 (.090 0.010) 7.37 (.290) CL OF LEADS WITHIN .762 (.030) CL OF CASE 31.75 (1.25) MIN. 5.08 .381 (.200 .015) .635 .051 (.025 .002) Dimensions: Millimeters (Inches) MIL-C-123/STYLE CKS06, -/02 Part Number 1/ 100 50 Rated Voltage M123A02BPC271_C M123A02BPC301_C M123A02BPC331_C M123A02BPC361_C M123A02BPC391_C M123A02BPC431_C M123A02BPC471_C M123A02BPC511_C M123A02BPC561_C M123A02BPC621_C M123A02BPC681_C M123A02BPC751_C M123A02BPC821_C M123A02BPC911_C M123A02BPC102_C M123A02BPC112_C M123A02BPC122_C M123A02BPC132_C M123A02BPC152_C M123A02BPC162_C M123A02BPC182_C M123A02BPC202_C M123A02BPC222_C M123A02BPC242_C 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1,000 1,100 1,200 1,300 1,500 1,600 1,800 2,000 2,200 2,400 F, J, K BP 100 F, J, K BP 100 M123A02BPB272_C M123A02BPB302_C M123A02BPB332_C M123A02BPB362_C M123A02BPB392_C M123A02BPB432_C M123A02BPB472_C 2,700 3,000 3,300 3,600 3,900 4,300 4,700 F, J, K BP 50 F, J, K BP 50 M123A02BXC562KC M123A02BXC682KC M123A02BXC822KC M123A02BXC103KC M123A02BXC123KC M123A02BXC153KC M123A02BXC183KC M123A02BXC223KC M123A02BXC273KC M123A02BXC333KC M123A02BXC393KC M123A02BXC473KC M123A02BXC563KC M123A02BXC683KC M123A02BXC823KC 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 K BX 100 M123A02BXC104KC 100,000 K BX 100 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 K BX 50 390,000 470,000 K BX 50 M123A01BPB271_C M123A01BPB301_C M123A01BPB331_C M123A01BPB361_C M123A01BPB391_C M123A01BPB431_C M123A01BPB471_C M123A01BPB511_C M123A01BPB561_C M123A01BPB621_C M123A01BPB681_C M123A01BPB751_C M123A01BPB821_C M123A01BPB911_C M123A01BPB102_C M123A01BPB112_C M123A01BPB122_C M123A01BPB132_C M123A01BPB152_C M123A01BPB162_C M123A01BPB182_C M123A01BPB202_C M123A01BPB222_C M123A01BPB242_C M123A01BPB272_C 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1,000 1,100 1,200 1,300 1,500 1,600 1,800 2,000 2,200 2,400 2,700 F, J, K F, J, K BP 50 M123A01BXC271KC M123A01BXC331KC M123A01BXC391KC M123A01BXC471KC M123A01BXC561KC M123A01BXC681KC M123A01BXC821KC M123A01BXC102KC M123A01BXC122KC M123A01BXC152KC M123A01BXC182KC M123A01BXC222KC M123A01BXC272KC M123A01BXC332KC M123A01BXC392KC M123A01BXC472KC 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 K BX 100 K BX 100 M123A01BXB562KC M123A01BXB682KC M123A01BXB822KC M123A01BXB103KC 5,600 6,800 8,200 10,000 K BX 50 M123A02BXB563KC M123A02BXB683KC M123A02BXB823KC M123A02BXB104KC M123A02BXB124KC M123A02BXB154KC M123A02BXB184KC M123A02BXB224KC M123A02BXB274KC M123A02BXB334KC K BX 50 M123A02BXB394KC M123A02BXB474KC 64 Capacitance Capacitance VoltagepF Tolerance Temperature Limits MIL-C-123/Axial Leads Dimensions: Millimeters (Inches) 4.06 (.160) 6.35 (.250) .508 .051 (.020 .002) 31.75 (1.25) MIN. 31.75 (1.25) MIN. 2.29 (.090) M123A04BPC4R7_W M123A04BPC5R1_W M123A04BPC6R2_W M123A04BPC6R8_W M123A04BPC7R5_W M123A04BPC8R2_W M123A04BPC9R1_W M123A04BPC100_W M123A04BPC110_W M123A04BPC120_W M123A04BPC130_W M123A04BPC150_W M123A04BPC160_W M123A04BPC180_W M123A04BPC200_W M123A04BPC220_W M123A04BPC240_W M123A04BPC270_W M123A04BPC300_W M123A04BPC330_W M123A04BPC360_W M123A04BPC390_W M123A04BPC430_W M123A04BPC470_W M123A04BPC510_W M123A04BPC560_W M123A04BPC620_W M123A04BPC680_W M123A04BPC750_W M123A04BPC820_W M123A04BPC910_W M123A04BPC101_W Capacitance Capacitance VoltagepF Tolerance Temperature Limits 4.7 C, D BP 5.1 6.2 6.8 7.5 8.2 9.1 10 C, J, K 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 C, J, K BP M123A04BPB111_W M123A04BPB121_W M123A04BPB131_W M123A04BPB151_W M123A04BPB161_W M123A04BPB181_W M123A04BPB201_W M123A04BPB221_W M123A04BPB241_W M123A04BPB271_W M123A04BPB301_W M123A04BPB331_W M123A04BPB361_W M123A04BPB391_W M123A04BPB431_W M123A04BPB471_W M123A04BPB511_W M123A04BPB561_W 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 M123A04BXC101KW M123A04BXC121KW M123A04BXC151KW M123A04BXC181KW M123A04BXC221KW M123A04BXC271KW M123A04BXC331KW M123A04BXC391KW M123A04BXC471KW M123A04BXC561KW M123A04BXC681KW M123A04BXC821KW M123A04BXC102KW M123A04BXB122KW M123A04BXB152KW M123A04BXB182KW M123A04BXB222KW M123A04BXB272KW M123A04BXB332KW M123A04BXB392KW M123A04BXB472KW F, J, K 2.29 (.090) MIL-C-123/STYLE CKS12, -/05 MIL-C-123/STYLE CKS11, -/04 Part Number 1/ .508 .051 (.020 .002) BP Rated Voltage Capacitance Capacitance VoltagepF Tolerance Temperature Limits Part Number 1/ 100 Rated Voltage M123A05BPC111_W M123A05BPC121_W M123A05BPC131_W M123A05BPC151_W M123A05BPC161_W M123A05BPC181_W M123A05BPC201_W M123A05BPC221_W 110 120 130 150 160 180 200 220 F, J, K BP 100 F, J, K BP 100 M123A05BPB241_W M123A05BPB271_W M123A05BPB301_W M123A05BPB331_W M123A05BPB361_W M123A05BPB391_W M123A05BPB431_W M123A05BPB471_W 240 270 300 330 360 390 430 470 F, J, K BP 50 F, J, K BP 50 M123A05BXC122KW M123A05BXC152KW M123A05BXC182KW M123A05BXC222KW M123A05BXC272KW M123A05BXC332KW M123A05BXC392KW M123A05BXC472KW 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 K BX 100 K BX 100 M123A05BXB562KW M123A05BXB682KW M123A05BXB822KW M123A05BXB103KW 5,600 6,800 8,200 10,000 K BX 50 K BX 50 100 50 390 .020 .002 140 1.250 MIN. MIL-C-123/STYLE CKS14, -/06 Part Number 1/ F, J, K BP 50 100 120 150 180 220 270 330 390 470 560 680 820 1,000 K BX 100 K BX 100 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 K BX 50 K BX 50 65 Capacitance Capacitance VoltagepF Tolerance Temperature Limits Rated Voltage M123A06BPC241_W M123A06BPC271_W M123A06BPC301_W M123A06BPC331_W M123A06BPC361_W M123A06BPC391_W M123A06BPC431_W M123A06BPC471_W M123A06BPC511_W M123A06BPC561_W M123A06BPC621_W M123A06BPC681_W M123A06BPC751_W M123A06BPC821_W M123A06BPC911_W M123A06BPC102_W 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1,000 F, J, K BP 100 F, J, K BP 100 M123A06BPB112_W M123A06BPB122_W M123A06BPB132_W M123A06BPB152_W M123A06BPB162_W M123A06BPB182_W M123A06BPB202_W M123A06BPB222_W M123A06BPB242_W 1,100 1,200 1,300 1,500 1,600 1,800 2,000 2,200 2,400 F, J, K BP 50 F, J, K BP 50 MIL-C-123/Axial Leads 690 MIL-C-123/STYLE CKS14, -/06 (continued) Part Number 1/ Capacitance Capacitance VoltagepF Tolerance Temperature Limits M123A06BPB272_W M123A06BPB302_W M123A06BPB332_W M123A06BPB362_W M123A06BPB392_W M123A06BPB432_W M123A06BPB472_W M123A06BPB512_W M123A06BPB562_W M123A06BPB622_W M123A06BPB682_W 2,700 3,000 3,300 3,600 3,900 4,300 4,700 5,100 5,600 6,200 6,800 M123A06BXC562KW M123A06BXC682KW M123A06BXC822KW M123A06BXC103KW F, J, K BP .025 .002 Rated Voltage MIL-C-123/STYLE CKS16, -/08 Part Number 1/ F, J, K BP 50 5,600 6,800 8,200 10,000 K BX 100 K BX 100 M123A06BXB123KW M123A06BXB153KW M123A06BXB183KW M123A06BXB223KW M123A06BXB273KW 12,000 15,000 18,000 22,000 27,000 K BX 50 M123A06BXB333KW M123A06BXB393KW M123A06BXB473KW 33,000 39,000 47,000 K BX 50 500 .025 .002 250 1.250 MIN. MIL-C-123/STYLE CKS15, -/07 Part Number 1/ 350 1.250 MIN. 50 Capacitance Capacitance VoltagepF Tolerance Temperature Limits Rated Voltage M123A07BPC112_W M123A07BPC122_W M123A07BPC132_W M123A07BPC152_W M123A07BPC162_W M123A07BPC182_W M123A07BPC202_W M123A07BPC222_W 1,100 1,200 1,300 1,500 1,600 1,800 2,000 2,200 F, J, K BP 100 F, J, K BP 100 M123A07BPB242_W M123A07BPB272_W M123A07BPB302_W M123A07BPB332_W M123A07BPB362_W M123A07BPB392_W M123A07BPB432_W M123A07BPB472_W M123A07BPB512_W M123A07BPB562_W M123A07BPB622_W M123A07BPB682_W M123A07BPB752_W M123A07BPB822_W M123A07BPB912_W M123A07BPB103_W M123A07BPB113_W M123A07BPB123_W M123A07BPB133_W M123A07BPB153_W 2,400 2,700 3,000 3,300 3,600 3,900 4,300 4,700 5,100 5,600 6,200 6,800 7,500 8,200 9,100 10,000 11,000 12,000 13,000 15,000 F, J, K BP 50 M123A07BPB163_W M123A07BPB183_W M123A07BPB203_W M123A07BPB223_W 16,000 18,000 20,000 22,000 F, J, K BP 50 M123A07BXC123KW M123A07BXC153KW M123A07BXC183KW M123A07BXC223KW M123A07BXC273KW M123A07BXC333KW M123A07BXC393KW M123A07BXC473KW M123A07BXC563KW M123A07BXC683KW M123A07BXC823KW M123A07BXC104KW 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 K BX 100 K BX 100 M123A07BXB124KW M123A07BXB154KW M123A07BXB184KW 120,000 150,000 180,000 K BX 50 K BX 50 66 Capacitance Capacitance VoltagepF Tolerance Temperature Limits M123A08BPC242_W M123A08BPC272_W M123A08BPC302_W M123A08BPC332_W M123A08BPC362_W M123A08BPC392_W M123A08BPC432_W M123A08BPC472_W M123A08BPC512_W M123A08BPC562_W M123A08BPC622_W M123A08BPC682_W M123A08BPC822_W M123A08BPC912_W M123A08BPC103_W 2,400 2,700 3,000 3,300 3,600 3,900 4,300 4,700 5,100 5,600 6,200 6,800 8,200 9,100 10,000 M123A08BPB113_W M123A08BPB123_W M123A08BPB133_W M123A08BPB153_W M123A08BPB163_W M123A08BPB183_W M123A08BPB203_W M123A08BPB223_W Rated Voltage F, J, K BP 100 F, J, K BP 100 11,000 12,000 13,000 15,000 16,000 18,000 20,000 22,000 F, J, K BP 50 F, J, K BP 50 M123A08BXC124KW M123A08BXC154KW M123A08BXC184KW M123A08BXC224KW M123A08BXC274KW M123A08BXC334KW M123A08BXC394KW M123A08BXC474KW 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 K BX 100 K BX 100 M123A08BXB564KW M123A08BXB684KW M123A08BXB824KW M123A08BXB105KW 560,000 680,000 820,000 1,000,000 K BX 50 K BX 50 MIL-C-123/2 Pin DIP STYLE CKS22, -/16 .092 .006 .260 .020 .128 .007 .325 .035 (SEE NOTE 4) .090 .004 60 20 TYP. .260 .020 .155 .007 .090 .004 60 20 TYP. .010 MAX. .283 .007 .090 .004 60 20 TYP. .010 MAX. .019 .004 .148 .028 .015 MIN. .325 .035 (SEE NOTE 4) .058 .012 SEE NOTE 2 .320 MAX. (SEE NOTE 3) .012 .004 .325 .035 (SEE NOTE 5) .058 .012 .092 .006 .260 .020 .148 .028 .015 MIN. .012 .004 SEE NOTE 3 .195 MAX. (SEE NOTE 4) .148 .028 .015 MIN. STYLE CKS24, -/18 .092 .006 .175 MAX. (SEE NOTE 3) .012 .004 STYLE CKS23, -/17 SEE NOTE 2 .058 .012 .010 MAX. .019 .004 .019 .004 NOTES: NOTES: NOTES: 1. Dimensions are in inches. 2. Leads shall be centered within .005 (0.13mm). 3. The angle shall be 95 +10, -5. 4. The distance between the centers of the mounting holes will be .300 .010 inch (7.62 0.25mm). 5. Nonconductive material shall not extend beyond .030 inch (0.76mm) from the edge of the capacitor body. 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Leads shall be centered within +.005 (0.13mm). 4. The angle shall be 95 +10, -5. 5. The distance between the centers of the mounting holes will be .300 .010 inch (7.62 0.25mm). 6. Nonconductive materials shall not extend beyond .030 inch (0.76mm) from the edge of the capacitor body. 1. Dimensions are in inches. 2. Leads shall be centered within .005 (0.13mm). 3. The angle shall be 95+10,-5 . 4. The distance between the centers of the mounting holes will be .300 .010 inch (7.62 0.25mm). 5. Nonconductive material shall not extend beyond .030 inch (0.76mm) from the edge of the capacitor body. MIL-C-123/STYLE CKS22, -/16 Part Number 1/ M123A16BPD1R0DC M123A16BPD1R2DC M123A16BPD1R5DC M123A16BPD1R8DC M123A16BPD2R2DC M123A16BPD2R7DC M123A16BPD3R3DC M123A16BPD3R9DC M123A16BPD4R7DC M123A16BPD5R6DC M123A16BPD6R8DC M123A16BPD8R2DC M123A16BPD100_C M123A16BPD120_C M123A16BPD150_C M123A16BPD180_C M123A16BPD220_C M123A16BPD270_C M123A16BPD330_C M123A16BPD390_C M123A16BPD470_C M123A16BPD560_C M123A16BPD680_C M123A16BPD820_C M123A16BPD101_C M123A16BPD121_C M123A16BPD151_C M123A16BPD181_C M123A16BPD221_C M123A16BPD271_C M123A16BPD331_C M123A16BPD391_C M123A16BPD471_C M123A16BPC561_C M123A16BPC681_C M123A16BPC821_C M123A16BPC102_C M123A16BPC122_C M123A16BPC152_C M123A16BPC182_C M123A16BPC222_C M123A16BPB272_C M123A16BPB332_C M123A16BPB392_C M123A16BPB472_C M123A16BXD271KC M123A16BXD331_C M123A16BXD391KC M123A16BXD471_C M123A16BXD561KC M123A16BXD681_C M123A16BXD821KC M123A16BXC102_C M123A16BXC122KC M123A16BXC152_C M123A16BXC182KC M123A16BXC222_C Capacitance Capacitance VoltageRated pf Tolerance Temperature Voltage Limits 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 D BP 200 D, J, K Part Number 1/ M123A16BXC272KC M123A16BXC332_C M123A16BXC392KC M123A16BXC472_C M123A16BXC562KC M123A16BXC682_C M123A16BXC822KC M123A16BXC103_C M123A16BXB123KC M123A16BXB153_C M123A16BXB183KC M123A16BXB223_C M123A16BXB273KC M123A16BXB333_C M123A16BXB393KC M123A16BXB473_C M123A16BXB563KC M123A16BXB683_C M123A16BXB823KC M123A16BXB104_C Capacitance Capacitance VoltageRated pf Tolerance Temperature Voltage Limits 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 18000 22000 27000 33000 39000 47000 56000 68000 82000 100000 K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M BX 100 BX BX 100 50 F, J, K F, J, K BP BP 200 100 F, J, K F, J, K BP BP 100 50 F, J, K K K, M K K, M K K, M K K, M K K, M K K, M BP BX 50 200 BX BX 200 100 BX 100 M123A17BPD561_C M123A17BPD681_C M123A17BPD821_C M123A17BPD102_C M123A17BPD122_C M123A17BPC272_C M123A17BPC332_C M123A17BPB472_C M123A17BPB562_C M123A17BPB682_C M123A17BPB822_C M123A17BPB103_C M123A17BXD102_C M123A17BXD122KC M123A17BXD152_C M123A17BXD182KC M123A17BXD222_C M123A17BXD272KC M123A17BXD332_C M123A17BXD392KC M123A17BXD472_C M123A17BXD562KC M123A17BXD682_C M123A17BXD822KC M123A17BXD103_C M123A17BXC123KC M123A17BXC153_C M123A17BXC183KC M123A17BXC223_C M123A17BXC273KC Part Number 1/ BX 50 Capacitance Capacitance VoltageRated pf Tolerance Temperature Voltage Limits 560 680 820 1000 1200 2700 3300 4700 5600 6800 8200 10000 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 18000 22000 27000 67 33000 39000 47000 56000 68000 82000 100000 120000 150000 180000 220000 K, M K K, M K K, M K K, M K K, M K K, M BX 100 BX BX 100 50 BX 50 MIL-C-123/STYLE CKS24, -/18 MIL-C-123/STYLE CKS23, -/17 Part Number 1/ M123A17BXC333_C M123A17BXC393KC M123A17BXC473_C M123A17BXC563KC M123A17BXC683_C M123A17BXC823KC M123A17BXC104_C M123A17BXB124KC M123A17BXB154_C M123A17BXB184KC M123A17BXB224_C Capacitance Capacitance VoltageRated pf Tolerance Temperature Voltage Limits 1/The complete part number shall include a symbol to indicate capacitance tolerance, as applicable. 1/The complete part number shall include a symbol to indicate capacitance tolerance, as applicable. F, J, K Part Number 1/ F, J, K BP 200 F, J, K F, J, K F, J, K F, J, K BP BP BP BP 200 100 100 50 F, J, K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K K, M K BP BX 50 200 BX BX 200 100 BX 100 M123A18BRC124KC M123A18BRC154_C M123A18BRB184KC M123A18BRB224_C M123A18BRB274KC M123A18BRB334_C M123A18BRB394KC M123A18BRB474_C Capacitance pf Capacitance Tolerance Rated Voltage Limits 120000 150000 180000 220000 270000 330000 390000 470000 K K, M K K, M K K, M K K, M 100 100 50 50 1/The complete part number shall include a symbol to indicate capacitance tolerance, as applicable. MIL-C-123 MARKING Radials Axials CKS05, -/01 Part Number M123A 01BPC 4R7CC CKS11, -/04 JAN 9910AA 12345 Date and 2 Digit Lot Code FSCM Lot Code and "J" 123A 270F 9910 BUJAP Spec. Number and Modification Code Cap. Value and Tolerance Date Code Manufacturer's Trademark and TC Code CKS12, -/05 CKS06, -/02 Part Number M123A 02BPC 271FC JAN "J" 271 F 100 V 9910AA 12345 Cap. Value Cap. Tolerance and Voltage Date and 2 Digit Lot Code FSCM J123A 05BPC 111CW 9910BU 12345 Part Number Date and Lot Code FSCM CKS14, -/06 2 Pin DIP Cap. Value "J" CKS22, -/16; CKS23 -/17; & CKS24 -/18 Top A123271K Mfg. ID Cap. Value and Tol. Bottom JP9910BU Date and Lot Code M123A06 BPC241FW 241 F 100 V J 9910BU 12345 Part Number Cap. Tolerance Voltage Date and Lot Code FSCM CKS15, -/07 Cap. Value "J" M123A07 BPC241FW 241 F 100 V J 9910BU 12345 Part Number Cap. Tolerance Voltage Date and Lot Code FSCM CKS16, -/08 Cap. Value "J" M123A08 BPC241FW 241 F 100 V J 9910BU 12345 Part Number Cap. Tolerance Voltage Date and Lot Code FSCM MILITARY PART NUMBER CROSS REFERENCE MIL-C-123/ MIL-C-123 CKS # M123/ CKS05 /1 CKS06 /2 CKS11 /4 CKS12 /5 CKS14 /6 CKS15 /7 CKS16 /8 CKS51 /10 CKS52 /11 CKS53 /12 CKS54 /13 CKS22 /16 CKS23 /17 CKS24 /18 MIL-C-39014 CKR # M39014/ CKR05 /01 CKR06 /02 CKR11 /05 CKR12 /05 CKR14 /05 CKR15 /05 CKR16 /05 N/A N/A N/A N/A N/A N/A N/A N/A CKR22 /22 CKR23 /22 CKR24 /22 MIL-C-20 CCR # M20/ CCR05 /35 CCR06 /36 CCR75 /27 CCR76 /28 CCR77 /29 CCR78 /30 CCR79 /31 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 68 MIL-C-55681 CDR # M55681/ N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A CDR01 /1 N/A N/A CDR03 /1 CDR06 /3 N/A N/A N/A N/A N/A N/A AVX CATALOG MR05 MR06 MA10 MA20 MA40 MA50 MA60 0805 1210 1808 2225 MD01 MD02 MD03 European Detail Specifications CECC 30-601 & 30-701 SkyCap, SpinGuards and Ceralam capacitors are available to European CECC specifications covering three standard dielectric materials: 1B/C0G, 2C1/X7R and 2F4/Y5V. To order use AVX part number with the Failure Rate code of "T" for CECC. SpinGuard - CECC 1B/A BSCECC 30 601 010 Issue 1 A/SA10 B/SA20 C/SA30 50V 1R0-102 1R0-222 3R3-562 100V 1R0-102 1R0-222 3R3-472 2C1/C BSCECC 30 701 014 Issue 1 200V 1R0-681 1R0-152 3R3-392 50V 221-393 271-823 561-184 100V 221-273 271-563 561-154 2F4/E BSCECC 30 701 015 Issue 1 200V 221-682 271-153 561-333 50V 102-224 472-474 103-105 100V 102-154 472-334 103-824 Molded Radial - CECC 1B/A CECC 30 601 009 Issue 1 B/MR05 C/MR06 50V 1R0-682 1R0-223 SkyCap - CECC 2C1/C CECC 30 701 007 Issue 1 100V 1R0-472 1R0-153 200V 1R0-332 1R0-123 SR15 = D2 SR20 = D6 1B/A CECC 30 601 801 Issue 2 SR15 SR20 SR21 SR30 SR40 SR50 SR65 50V 1R0-122 1R0-682 1R0-682 102-273 103-563 103-104 102-273 100V 200V 1R0-681 1R0-471 1R0-392 1R0-392 1R0-392 1R0-392 102-223 102-223 103-393 103-393 103-823 103-563 102-223 102-103 50V 221-224 122-105 100V 221-154 122-474 SR21 = D7 SR30 = D11 200V 221-393 122-124 50V 221-333 102-184 102-184 333-105 334-155 104-155 333-105 69 100V 221-273 102-124 102-124 333-334 334-105 104-185 333-334 50V 103-125 223-335 SR40 = D15 SR50 = D14 2C1/C CECC 30 701 801 Issue 2 500V -- 1R0-152 1R0-152 101-472 -- -- 101-472 2F4/E CECC 30 701 008 Issue 1 200V 221-562 102-333 102-333 333-124 124-274 104-564 333-124 500V -- 102-103 102-153 103-473 -- -- 103-473 100V 103-224 223-684 SR65 = D16 2F4/E CECC 30 701 802 Issue 1 50V 103-154 103-824 103-824 104-225 105-156 225-276 104-225 100V 103-393 103-224 103-224 104-684 105-335 225-685 104-684 USA EUROPE ASIA-PACIFIC AVX Myrtle Beach, SC Corporate Offices AVX Limited, England European Headquarters AVX/Kyocera, Singapore Asia-Pacific Headquarters Tel: 843-448-9411 FAX: 843-448-1943 Tel: ++44 (0)1252 770000 FAX: ++44 (0)1252 770001 Tel: (65) 258-2833 FAX: (65) 350-4880 AVX Northwest, WA AVX S.A., France AVX/Kyocera, Hong Kong Tel: 360-669-8746 FAX: 360-699-8751 Tel: ++33 (1) 69.18.46.00 FAX: ++33 (1) 69.28.73.87 Tel: (852) 2-363-3303 FAX: (852) 2-765-8185 AVX North Central, IN AVX GmbH, Germany - AVX AVX/Kyocera, Korea Tel: 317-848-7153 FAX: 317-844-9314 Tel: ++49 (0) 8131 9004-0 FAX: ++49 (0) 8131 9004-44 Tel: (82) 2-785-6504 FAX: (82) 2-784-5411 AVX Northeast, MA AVX GmbH, Germany - Elco AVX/Kyocera, Taiwan Tel: 508-485-8114 FAX: 508-485-8471 Tel: ++49 (0) 2741 2990 FAX: ++49 (0) 2741 299133 Tel: (886) 2-2516-7010 FAX: (886) 2-2506-9774 AVX Mid-Pacific, CA AVX srl, Italy AVX/Kyocera, China Tel: 408-436-5400 FAX: 408-437-1500 Tel: ++39 (0)2 614571 FAX: ++39 (0)2 614 2576 Tel: (86) 21-6249-0314-16 FAX: (86) 21-6249-0313 AVX Southwest, AZ AVX sro, Czech Republic AVX/Kyocera, Malaysia Tel: 602-539-1496 FAX: 602-539-1501 Tel: ++420 (0)467 558340 FAX: ++420 (0)467 2844 Tel: (60) 4-228-1190 FAX: (60) 4-228-1196 AVX South Central, TX Elco, Japan Tel: 972-669-1223 FAX: 972-669-2090 Tel: 045-943-2906/7 FAX: 045-943-2910 Kyocera, Japan AVX Southeast, NC Tel: (81) 75-593-4518 FAX: (81) 75-502-2705 Tel: 919-878-6357 FAX: 919-878-6462 AVX Canada Contact: Tel: 905-564-8959 FAX: 905-564-9728 A KYOCERA GROUP COMPANY http://www.avxcorp.com S-MCLC20M199-C