415 Technical Data Sheet
Ferric Chloride
ISO 9001:2008 Registered Quality System. Burlington, Ontario, CANADA SAI Global File: 004008 415-Liquid
Page 2 of 3
Date: 21 March 2018 / Ver. 2.01
Health and Safety
Please see the 415 Safety Data Sheet (SDS) for further details on transportation, storage, handling,
safety guidelines, and regulatory compliance.
Application Instructions
For best results, follow the procedure below. If further directions for etching or making a printed circuit
board (PCB), consult the photofabrication process guide available free from your dealer.
1. Fully immerse copper board in solution.
2. Agitate until etching action is complete.
To speed up etching:
• Warm the ferric chloride solution between 35 to 55 °C [95 to 131 °F].
ATTENTION! Do NOT heat ferric chloride solution above 55 °C [131 °F].
NOTE: Dilution is not recommended.
Packaging and Supporting Products
Related Products and Etching Kits
• Economy Etching Kit: Cat. No. 416-ES
• Photofabrication Kit: Cat. No. 416-K
• Professional Etching Kit: Cat. No. 416-E