LMK00101SQX/NOPB - TEXAS INSTRUMENTS

74AUP1G08

Document number: DS35150 Rev. 4 - 2

1 of 16

www.diodes.com

March 2015

74AUP1G08

SINGLE 2 INPUT POSITIVE AND GATE

Description

The Advanced,

Ultra Low Power (AUP) CMOS logic family is

designed for low power and extended battery life in portable

applications.

The 74AUP1G08 is a single, two-input,

positive AND gate with a

standard push-

pull output designed for operation over a power supply

range of 0.8V to 3.6V.

The device is fully specified for partial power

down applications using I

OFF

. The I

OFF

circuitry disables the ou

tput

preventing damaging current backflow when the device is powered

down. The gate performs the positive Boolean function:

B

A

Y

•

=

or

B

A

Y

+

=

Features

• Advanced Ultra Low Power (AUP) CMOS

• Supply Voltage Range from 0.8V to 3.6V

• ±4mA Output Drive at 3.0V

• Low Static Power Consumption

Icc < 0.9µA

• Low Dynamic Power Consumption

C

PD

= 6.3 pF (Typical at 3.6V)

• Schmitt Trigger Action at All Inputs Make the Circuit Tolerant for

Slower Input Rise and Fall Time. The hysteresis is typically

250mV at V

CC

= 3.0V.

• I

OFF

Supports Partial-Power-Down Mode Operation

• ESD Protection Exceeds JESD 22

2000-V Human Body Model (A114)

Exceeds 1000-V Charged Device Model (C101)

• Latch-Up Exceeds 100mA per JESD 78, Class I

• Leadless packages named per JESD30E

• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

• Halogen and Antimony Free. “Green” Device (Note 3)

Pin Assignments

Applications

• Suited for battery and low power needs

• Wide array of products such as:

 Tablets, E-readers

 Cell Phones, Personal Navigation / GPS

 MP3 Players ,Cameras, Video Recorders

 PCs, Ultrabooks, Notebooks, Netbooks

 Computer Peripherals, Hard Drives, SSDs, CD/DVD ROMs

 TVs, DVDs, DVRs, Set-Top Boxess

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and

<1000ppm antimony compounds.

74AUP1G08

Document number: DS35150 Rev. 4 - 2

2 of 16

www.diodes.com

March 2015

74AUP1G08

Ordering Information

74

AUP

1G

0

8

XXX

-

7

Logic Device

Function

Package

Packing

74 : Logic Prefix

0

8

:

2

-

Input

SE : SOT353

-

7 : 7” Tape & Reel

AUP

:

0.8

to

3.6

V

AND Gate

FS3 : X2

-

DFN0808

-

4

Logic Family

FW5 :

X1

-

DFN1010

-

6

1G : One Gate

FW4 :X2

-

DFN1010

-

6

FX4 : X2

-

DFN1409

-

6

FZ4 : X2

-

DFN1410

-

6

Device Package

Code

Package

(Notes 4 & 5)

Package

Size

7” Tape and Reel

Quantity

Part Number Suffix

74AUP1G08SE-7 SE SOT353 2.0mm x 2.0mm x 1.1mm

0.65 mm lead pitch 3,000/Tape & Reel -7

74AUP1G08FS3-7 FS3 X2-DFN0808-4 0.8mm x 0.8mm x 0.35mm

0.5 mm pad pitch (diamond) 5,000/Tape & Reel -7

74AUP1G08FW5-7 FW5 X1-DFN1010-6 1.0mm x 1.0mm x 0.5mm

0.35 mm pad pitch 5,000/Tape & Reel -7

74AUP1G08FW4-7 FW4 X2-DFN1010-6 1.0mm x 1.0mm x 0.4mm

0.35 mm pad pitch 5,000/Tape & Reel -7

74AUP1G08FX4-7 FX4 X2-DFN1409-6

Chip scale alternative

1.4mm x 0.9mm x 0.4mm

0.5 mm pad pitch 5,000/Tape & Reel -7

74AUP1G08FZ4-7 FZ4 X2-DFN1410-6 1.4mm x 1.0mm x 0.4mm

0.5 mm pad pitch 5,000/Tape & Reel -7

Notes: 4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at

http://www.diodes.com/datasheets/ap02001.pdf.

5. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf.

Pin Descriptions

Pin Name Function

A Data Input

B Data Input

GND Ground

Y Data Output

Vcc Supply Voltage

Logic Diagram

Function Table

Inputs Output

A B Y

L L L

L H L

H L L

H H H

1

A

2

4

Y

B

74AUP1G08

Document number: DS35150 Rev. 4 - 2

3 of 16

www.diodes.com

March 2015

74AUP1G08

Absolute Maximum Ratings

(Notes 6 & 7) (@T

A

= +25°C, unless otherwise specified.)

Symbol Parameter Rating Unit

ESD HBM Human Body Model ESD Protection 2 kV

ESD CDM Charged Device Model ESD Protection 1 kV

V

CC

Supply Voltage Range -0.5 to +4.6 V

V

I

Input Voltage Range -0.5 to +4.6 V

V

o

Voltage applied to output in High or Low State -0.5 to V

CC

+0.5 V

I

IK

Input Clamp Current V

I

< 0 50 mA

I

OK

Output Clamp Current (V

O

< 0 ) 50 mA

I

O

Continuous Output Current (V

O

= 0 to V

CC

) ±20 mA

I

CC

Continuous Current Through V

CC

50 mA

I

GND

Continuous Current Through GND -50 mA

T

J

Operating Junction Temperature -40 to +150 °C

T

STG

Storage Temperature -65 to +150 °C

Notes: 6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device

operation should be within recommend values.

7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could

cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range.

Recommended Operating Conditions

(Note 8) (@T

A

= +25°C, unless otherwise specified.)

Symbol Parameter Min Max Unit

V

CC

Operating Voltage 0.8 3.6 V

V

I

Input Voltage 0 3.6 V

V

O

Output Voltage 0 V

CC

V

I

OH

High-Level Output Current

V

CC

= 0.8V — -20 µA

V

CC

= 1.1V — -1.1

mA

V

CC

= 1.4V — -1.7

V

CC

= 1.65V — -1.9

V

CC

= 2.3V — -3.1

V

CC

= 3.0V — -4

I

OL

Low-Level Output Current

V

CC

= 0.8V — 20 µA

V

CC

= 1.1V — 1.1

mA

V

CC

= 1.4V — 1.7

V

CC

= 1.65V — 1.9

V

CC

= 2.3V — 3.1

V

CC

= 3.0V — 4

∆t/∆V Input Transition Rise or Fall Rate V

CC

= 0.8V to 3.6V — 200 ns/V

T

A

Operating Free-Air Temperature -40 +125 °C

Note: 8. Unused inputs should be held at V

CC

or Ground.

74AUP1G08

Document number: DS35150 Rev. 4 - 2

4 of 16

www.diodes.com

March 2015

74AUP1G08

Electrical Characteristics

(@T

A

= +25°C, unless otherwise specified.)

Symbol

Parameter Test Conditions V

CC

T

A

= +25°C T

A

= -40°C to +85°C Unit

Min Max Min Max

V

IH

High-Level Input

Voltage

— 0.8V to 1.65V 0.80 x V

CC

— 0.80 x V

CC

—

V

— 1.65V to 1.95V 0.65 x V

CC

— 0.65 x V

CC

—

— 2.3V to 2.7V 1.6 — 1.6 —

— 3.0V to 3.6V 2.0 — 2.0 —

V

IL

Low-Level Input

Voltage

— 0.8V to 1.65 V — 0.30 x V

CC

— 0.30 x V

CC

V

— 1.65V to 1.95V — 0.35 x V

CC

— 0.35 x V

CC

— 2.3V to 2.7V — 0.7 — 0.7

— 3.0V to 3.6V — 0.9 — 0.9

V

OH

High-Level Output

Voltage

I

OH

= -20µA 0.8V to 3.6V V

CC

– 0.1 — V

CC

– 0.1 —

V

I

OH

= -1.1mA 1.1V 0.75 x V

CC

— 0.7 x V

CC

—

I

OH

= -1.7mA 1.4V 1.11 — 1.03 —

I

OH

= -1.9mA 1.65V 1.32 — 1.3 —

I

OH

= -2.3mA 2.3V 2.05 — 1.97 —

I

OH

= -3.1mA 1.9 — 1.85 —

I

OH

= -2.7mA 3V 2.72 — 2.67 —

I

OH

= -4mA 2.6 — 2.55 —

V

OL

Low-Level Output

Voltage

I

OL

= 20µA 0.8V to 3.6 V — 0.1 — 0.1

V

I

OL

= 1.1mA 1.1V — 0.3 x V

CC

— 0.3 x V

CC

I

OL

= 1.7mA 1.4V — 0.31 — 0.37

I

OL

= 1.9mA 1.65V — 0.31 — 0.35

I

OL

= 2.3mA 2.3V — 0.31 — 0.33

I

OL

= 3.1mA — 0.44 — 0.45

I

OL

= 2.7mA 3V — 0.31 — 0.33

I

OL

= 4mA — 0.44 — 0.45

I

Input Current A or B Input

V

I

= GND to 3.6V 0V to 3.6V — ± 0.1 — ± 0.5 µA

I

OFF

Power Down Leakage

Current V

I

or V

O

= 0V to 3.6V 0 — 0.2 — 0.6 µA

∆I

OFF

Delta Power Down

Leakage Current V

I

or V

O

= 0V to 3.6V 0V to 0.2V — 0.2 — 0.6 µA

I

CC

Supply Current V

I

= GND or V

CC

, I

O

= 0

0.8V to 3.6V — 0.5 — 0.9 µA

∆I

CC

Additional Supply

Current

One input at V

CC

-0.6V

Other inputs at V

CC

or

GND

3.3V — 40 — 50 µA

74AUP1G08

Document number: DS35150 Rev. 4 - 2

5 of 16

www.diodes.com

March 2015

74AUP1G08

Electrical Characteristics

(continued) (@T

A

= +25°C, unless otherwise specified.)

Symbol

Parameter Test Conditions V

CC

T

A

= -40°C to +125°C Unit

Min Max

V

IH

High-Level Input

Voltage

— 0.8V to 1.65V 0.80 x V

CC

—

V

— 1.65V to 1.95V 0.70 x V

CC

—

— 2.3V to 2.7V 1.6 —

— 3.0V to 3.6V 2.0 —

V

IL

Low-Level input

voltage

— 0.8V to 1.65 V — 0.25 x V

CC

V

— 1.65V to 1.95V — 0.30 x V

CC

— 2.3V to 2.7V — 0.7

— 3.0V to 3.6V — 0.9

V

OH

High-Level Output

Voltage

I

OH

= -20 µA 0.8V to 3.6V V

CC

– 0.11 —

V

I

OH

= -1.1 mA 1.1V 0.6 x V

CC

—

I

OH

= -1.7 mA 1.4V 0.93 —

I

OH

= -1.9 mA 1.65V 1.17 —

I

OH

= -2.3 mA 2.3V 1.77 —

I

OH

= -3.1 mA 1.67 —

I

OH

= -2.7 mA 3V 2.40 —

I

OH

= -4 mA 2.30 —

V

OL

Low-Level Output

Voltage

I

OL

= 20 µA 0.8 V to 3.6V — 0.11

V

I

OL

= 1.1 mA 1.1V — 0.33 x V

CC

I

OL

= 1.7 mA 1.4V — 0.41

I

OL

= 1.9 mA 1.65V — 0.39

I

OL

= 2.3 mA 2.3V — 0.36

I

OL

= 3.1 mA — 0.50

I

OL

= 2.7 mA 3V — 0.36

I

OL

= 4 mA — 0.50

I

Input Current A or B Input

V

I

= GND to 3.6V 0V to 3.6V — ± 0.75 µA

I

OFF

Power Down Leakage

Current V

I

or V

O

= 0V to 3.6V 0 — ± 3.5 µA

∆I

OFF

Delta Power Down

Leakage Current V

I

or V

O

= 0V to 3.6V 0V to 0.2V — ± 2.5 µA

I

CC

Supply Current V

I

= GND or V

CC

, I

O

= 0

0.8V to 3.6V — 3.0 µA

∆I

CC

Additional Supply

Current

Input at V

CC

-0.6V

Other inputs at V

CC

or

GND

3.3V — 75 µA

74AUP1G08

Document number: DS35150 Rev. 4 - 2

6 of 16

www.diodes.com

March 2015

74AUP1G08

Switching Characteristics

C

L

=5pF, See Figure 1

Parameter

From

Input

To

Output V

CC

T

A

= +25°C T

A

= -40°C to +85°C T

A

= -40°C to +125°C Unit

Min Typ Max Min Max Min Max

t

pd

A or B Y

0.8V — 17.0 — — — — —

ns

1.2V ± 0.1V 2.4 5.1 10.8 2.1 11.7 2.1 12.9

1.5V ± 0.1V 1.6 3.7 6.5 1.5 7.5 1.5 8.3

1.8V ± 0.15V 1.3 3.0 5.2 1.3 6.1 1.3 6.7

2.5V ± 0.2V 1.1 2.4 4.0 1.0 4.8 1.0 5.3

3.3V ± 0.3V 1.0 2.2 3.5 0.9 4.3 0.9 4.8

C

L

=10pF, See Figure 1

Parameter

From

Input

To

Output V

CC

T

A

= +25°C T

A

= -40°C to +85°C T

A

= -40°C to +125°C Unit

Min Typ Max Min Max Min Max

t

pd

A or B Y

0.8V — 20.6 — — — — —

ns

1.2V ± 0.1V 2.4 6.0 12.5 2.2 13.6 2.2 15.0

1.5V ± 0.1V 2.0 4.3 7.6 1.8 8.9 1.8 9.8

1.8V ± 0.15V 1.7 3.6 6.1 1.6 7.2 1.6 7.9

2.5V ± 0.2V 1.4 2.9 4.7 1.3 5.7 1.3 6.3

3.3V ± 0.3V 1.3 2.7 4.2 1.2 4.7 1.2 5.2

C

L

=15pF, See Figure 1

Parameter

From

Input

To

Output V

CC

T

A

= +25°C T

A

= -40°C to +85°C T

A

= -40°C to +125°C Unit

Min Typ Max Min Max Min Max

t

pd

A or B Y

0.8V — 24.1 — — — — —

ns

1.2V ± 0.1V 3.4 6.8 14.2 3.1 15.7 3.1 17.3

1.5V ± 0.1V 2.3 4.9 8.6 2.1 10.1 2.1 11.2

1.8V ± 0.15V 1.9 4.0 6.9 1.8 8.2 1.8 9.0

2.5V ± 0.2V 1.7 3.4 5.5 1.6 6.5 1.6 7.2

3.3V ± 0.3V 1.5 3.1 4.8 1.5 5.9 1.5 6.5

C

L

=30pF, See Figure 1

Parameter

From

Input

To

Output V

CC

T

A

= +25°C T

A

= -40°C to +85°C T

A

= -40°C to +125°C Unit

Min TYP Max Min Max Min Max

t

pd

A or B Y

0.8V — 34.4 — — — — —

ns

1.2V ± 0.1V 4.0 9.1 19.4 4.0 21.8 4.0 24.0

1.5V ± 0.1V 3.2 6.4 11.5 2.9 13.6 2.9 15.0

1.8V ± 0.15V 2.6 5.3 9.1 2.4 10.9 2.4 12.1

2.5V ± 0.2V 2.3 4.5 7.2 2.2 8.6 2.2 9.5

3.3V ± 0.3V 2.1 4.2 6.2 2.1 7.5 2.1 8.3

74AUP1G08

Document number: DS35150 Rev. 4 - 2

7 of 16

www.diodes.com

March 2015

74AUP1G08

Operating and Package Characteristics

(@T

A

= +25°C, unless otherwise specified.)

Parameter Test

Conditions V

CC

Typ Unit

C

pd

Power Dissipation

Capacitance

f = 1MHz

No Load

0.8V 6.7

pF

1.2V ± 0.1V 6.6

1.5V ± 0.1V 6.5

1.8V ± 0.15V 6.5

2.5V ± 0.2V 6.4

3.3V ± 0.3V 6.3

C

i

Input Capacitance V

i

= V

CC

or GND 0V or 3.3V 1.5 pF

θ

JA

Thermal Resistance

Junction-to-Ambient

SOT353

(Note 9)

— 371

°C/W

X2-DFN0808-4 — 430

X1-DFN1010-6 — 435

X2-DFN1010-6 — 445

X2-DFN1409-6 — 470

X2-DFN1410-6 — 460

θ

JC

Thermal Resistance

Junction-to-Case

SOT353

(Note 9)

— 143

°C/W

X2-DFN0808-4 — 240

X1-DFN1010-6 — 250

X2-DFN1010-6 — 250

X2-DFN1409-6 — 275

X2-DFN1410-6 — 265

Note: 9. Test condition for each of the six package types: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.

74AUP1G08

Document number: DS35150 Rev. 4 - 2

8 of 16

www.diodes.com

March 2015

74AUP1G08

Parameter Measurement Information

Vcc Inputs V

M

C

L

V

I

t

r

/t

f

0.8V V

CC

≤3ns V

CC

/2 5, 10, 15, 30pF

1.2V±0.1V V

CC

≤3ns V

CC

/2 5, 10, 15, 30pF

1.5V±0.1V V

CC

≤3ns V

CC

/2 5, 10, 15, 30pF

1.8V ±0.15V V

CC

≤3ns V

CC

/2 5, 10, 15, 30pF

2.5V±0.2V V

CC

≤3ns V

CC

/2 5, 10, 15, 30pF

3.3V±0.3V V

CC

≤3ns V

CC

/2 5, 10, 15, 30pF

Voltage Waveform Pulse Duration

Voltage Waveform Propagation Delay Times

Inverting and Non Inverting Outputs

Figure 1 Load Circuit and Voltage Waveforms

Notes: A. Includes test lead and test apparatus capacitance.

B. All pulses are supplied at pulse repetition rate ≤ 10MHz.

C. Inputs are measured separately one transition per measurement.

D. t

PLH

and t

PHL

are the same as t

PD.

74AUP1G08

Document number: DS35150 Rev. 4 - 2

9 of 16

www.diodes.com

March 2015

74AUP1G08

Marking Information

(1) SOT353

1 2 3

5

7

4

XX Y W X

XX : Identification code

W : Week : A~Z : 1~26 week;

X : A~Z : Internal code

(

((

(Top View

Top ViewTop View

Top View)

))

)

Y : Year 0~9

a~z : 27~52 week; z represents

52 and 53 week

Part Number Package Identification Code

74AUP1G08SE SOT353 XP

(2) X2-DFN0808-4, X1-DFN1010-6, X2-DFN1010-6, X2-DFN1409-6 and X2-DFN1410-6

Y : Year : 0~9

(Top View)

X : A~Z : Internal code

Y W X

XX XX : Identification Code

W : Week : A~Z : 1~26 week;

a~z : 27~52 week; z represents

52 and 53 week

Part Number Package Identification Code

74AUP1G08FS3 X2-DFN0808-4 YR

74AUP1G08FW5 X1-DFN1010-6 Q7

74AUP1G08FW4 X2-DFN1010-6 XP

74AUP1G08FX4 X2-DFN1409-6 HF

74AUP1G08FZ4 X2-DFN1410-6 XP

74AUP1G08

Document number: DS35150 Rev. 4 - 2

10 of 16

www.diodes.com

March 2015

74AUP1G08

SOT353 Package Outline Dimensions and Suggested Pad Layout

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.

SOT353

Dim

Min

Max

Typ

A

0.10 0.30 0.25

B

1.15 1.35 1.30

C

2.00 2.20 2.10

D

0.65 Typ

F

0.40 0.45 0.425

H

1.80 2.20 2.15

J

0 0.10 0.05

K

0.90 1.00 1.00

L

0.25 0.40 0.30

M

0.10 0.22 0.11

α

αα

α

0° 8° -

All Dimensions in mm

Dimensions Value (in mm)

Z 2.5

G 1.3

X 0.42

Y 0.6

C1 1.9

C2 0.65

A

M

J

L

D

B C

H

K

F

X

Z

Y

C1

C2C2

G

74AUP1G08

Document number: DS35150 Rev. 4 - 2

X2-DFN0808-4

Package Outline Dimensions

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for

k

R0.05 TYP

AA1

E

D

e

D2

E2

Zb

L

Pin #1 ID

X3

Y

X

C

Y

1

X

1

X2

Y2

11 of 16

www.diodes.com

Package Outline Dimensions

and

Suggested Pad Layout

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for

the latest version.

Dimensions

C

X

X1

X2

X3

Y

Y1

Y2

Y3

A3

Seating Plane

L1

Y3

March 2015

74AUP1G08

Suggested Pad Layout

Dimensions

Value

(in mm)

0.480

0.320

0.300

0.106

0.800

0.320

0.300

0.106

0.900

74AUP1G08

Document number: DS35150 Rev. 4 - 2

12 of 16

www.diodes.com

March 2015

74AUP1G08

X1-DFN1010-6 (Type B) Package Outline Dimensions and Suggested Pad Layout

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.

X1

-

DFN1010

-

6

(Type B)

Dim

Min

Max

Typ

A

-

0.50

0.39

A1

- 0.04

-

b

0.12

0.20

0.15

D

0.95

1.050

1.00

E

0.95

1.050

1.00

e

0.35 BSC

e1

0.55 BSC

L3

0.27

0.30

L

3a

0.32

0.40

0.35

All Dimensions in mm

Dimensions

Value

(in mm)

C

0.350

G

0.150

G1

0.150

X

0.200

X1

0.900

Y

0.500

Y1

0.525

Y2

0.475

Y3

1.150

AA1

Seating Plane

D

E

b

eL3(5x)

(Pin #1 ID)

L3a

e1

Pin1

X1

Y3

C

Y2

Y1

Y(4x)

X

G1

G

74AUP1G08

Document number: DS35150 Rev. 4 - 2

X2-DFN1010-6

Package Outline Dimensions

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for

AA1

D

E

Z(4x)

e

L(6x)

(Pin #1 ID)

b1

1

Y1

X1

G(4x)

C

13 of 16

www.diodes.com

Package Outline Dimensions

and

Suggested Pad Layout

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for

the latest version.

Dimensions

(in

C

G

X

X1

Y

Y1

A3

D

b(6x)

K

X1

X(6x)

Y (6x)

March 2015

74AUP1G08

Suggested Pad Layout

Value

(in

mm)

0.350

0.150

0.200

0.900

0.550

1.250

74AUP1G08

Document number: DS35150 Rev. 4 - 2

14 of 16

www.diodes.com

March 2015

74AUP1G08

X2-DFN1409-6 Package Outline Dimensions and Suggested Pad Layout

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.

X2

-

DFN1409

-

6

Dim

Min

Max

Typ

A

- 0.40 0.39

A1

0 0.05 0.02

A3

- - 0.13

Ø

0.20 0.30 0.25

D

1.35 1.45 1.40

E

0.85 0.95 0.90

e1

- - 0.50

e2

- - 0.50

Z1

- - 0.075

Z2

- - 0.075

All Dimensions in mm

Dimensions Value

(in mm)

C 1.000

C1 0.500

D 0.300

G 0.200

G1 0.200

X 0.400

Y 0.150

D

E

e1

A

A3

(Pin #1 ID)

Seating Plane

Z1(4x)

A1

Ø(6x)

e2

Z2(4x)

Pin1

C

C1

Y

XG

D (6x)

G1

74AUP1G08

Document number: DS35150 Rev. 4 - 2

15 of 16

www.diodes.com

March 2015

74AUP1G08

X2-DFN1410-6 Package Outline Dimensions and Suggested Pad Layout

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.

X2

-

DFN1410

-

6

Dim

Min

Max

Typ

A

–– 0.40 0.39

A1

0.00 0.05 0.02

A3

–– –– 0.13

b

0.15 0.25 0.20

D

1.35 1.45 1.40

E

0.95 1.05 1.00

e

–– –– 0.50

L

0.25 0.35 0.30

Z

–– –– 0.10

Z1

0.045

0.105

0.075

All Dimensions in mm

Dimensions

Value

(in mm)

C 0.500

G 0.250

X 0.250

X1 1.250

Y 0.525

Y1 1.250

D

E

e

L(6x)

A

A3

(Pin #1 ID)

Seating Plane

Z(4x)

A1

b(6x)

Z1(4x)

1

X1

Y1

Y(6x)

X(6x)

G(4x)

C

74AUP1G08

Document number: DS35150 Rev. 4 - 2

16 of 16

www.diodes.com

March 2015

74AUP1G08

IMPORTANT NOTICE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes

without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the

application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or

trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume

all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated

website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales

channel.

Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and

hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or

indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings

noted herein may also be covered by one or more United States, international or foreign trademarks.

This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the

final and determinative format released by Diodes Incorporated.

LIFE SUPPORT

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express

written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

1. are intended to implant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the

labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the

failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and

acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and

any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related

information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its

representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or

systems.

www.diodes.com