TECH. CORP.
SPECIFICATIONS
CUSTOMER
:
PTC
SAMPLE CODE
:
PS320240T-006-I-01
MASS PRODUCTION CODE
:
PH320240T-006-I-Q
SAMPLE VERSION
:
01
SPECIFICATIONS EDITION
:
002
DRAWING NO. (Ver.)
:
LMD-PH320240T-006-I-Q (Ver:001)
PACKAGING NO. (Ver.)
:
PKG- PH320240T-006-I-Q (Ver:001)
Customer Approved
Date:
Approved Checked Designer
Oliver Huang
Jared Hsieh
Preliminary specification for design input
Specification for sample approval
POWERTIP TECH. CORP.
Headquarters:
No.8, 6
th
Road, Taichung Industrial Park,
Taichung, Taiwan
407
8
TEL: 886-4-2355-8168
FAX: 886-4-2355-8166
E-mail: sales@powertip.com.tw
Http://www.powertip.com.tw
NO.PT-A-005-8
POWERTIP
TW RD APR
2008.07.25
PH320240T-006-I-Q Page2 SAMPLE Ver.01
SPEC Edi.002
History of Version
Date
(mm / dd / yyyy)
Ver.
Edi.
Description Page Design by
2007/6/13 0 MASS PRODUCTION. Jared
2008/4/14 001
1 Delete Vi voltage, Item
1.3 Absolute
Maximum Ratings.
2 Add Timing Characteristics
3 Modify item, 2.5 Reference Initial code.
5
14,15
19
Jared
07/14/2008
01 002
1 Modify Average Brightness and
Color of
CIE Coordinate.
2 Modify Backlight Characteristics.
6
9
Jared
Total: 30 Page
PH320240T-006-I-Q Page3 SAMPLE Ver.01
SPEC Edi.002
Contents
1. SPECIFICATIONS
1.1 Features
1.2 Mechanical Specifications
1.3 Absolute Maximum Ratings
1.4 DC Electrical Characteristics
1.5 Optical Characteristics
1.6 Backlight Characteristics
2. MODULE STRUCTURE
2.1 Counter Drawing
2.2 Interface Pin Description
2.3 Timing Characteristics
2.3.1 SPI Read
2.3.2 SPI Write
2.3.3 SPI Timing Table
2.4 Power Sequence
2.4.1 Power up sequence
2.4.2 Power down sequence
2.5 Reference Initial code
3. QUALITY ASSURANCE SYSTEM
3.1 Quality Assurance Flow Chart
3.2 Inspection Specification
4. RELIABILITY TEST
4.1 Reliability Test Condition
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 Safety
5.2 Handling
5.3 Storage
5.4 Terms of Warranty
Appendix
LCM Drawing
Packaging
Note : For detailed information please refer to IC data sheet :
Primacy(TFT LCD): Himax: HX8238-A
PH320240T-006-I-Q Page4 SAMPLE Ver.01
SPEC Edi.002
1. SPECIFICATIONS
1.1 Features
Main LCD panel
Item Standard Value
Display Type 320(RGB) * 240 Dots
LCD Type Normally white , Transmissive type
Screen size(inch) 3.5 inch
Viewing Direction 6 O’clock
Color configuration RGB-Strip
Backlight LED
Interface Digital 24-bits RGB
Other(controller/driver IC) Himax: HX8238-A
ROHS
THIS PRODUCT CONFORMS THE ROHS OF PTC
Detail information please refer web side :
http://www.powertip.com.tw/news/LatestNews.asp
1.2 Mechanical Specifications
Item Standard Value Unit
Outline Dimension 76.9(W) * 63.9 (L) * 3.5 (H)(MAX) mm
LCD panel
Item Standard Value Unit
Viewing Area 72.88 (W) * 55.36 (L) mm
Active Area 70.08 (W) * 52.56 (L) mm
Note : For detailed information please refer to LCM drawing
PH320240T-006-I-Q Page5 SAMPLE Ver.01
SPEC Edi.002
1.3 Absolute Maximum Ratings
Module
Item Symbol Condition Min. Max. Unit
System Power Supply Voltage
VDDIO VSS=0 -0.3 4.0 V
Operating Temperature TOP - -20 70 °C
Storage Temperature TST - -30 80 °C
1.4 DC Electrical Characteristics
Module VSS = 0V, Ta = 25°C
Item Symbol Condition Min.
Typ.
Max.
Unit
Power Supply Voltage1 VDDIO - 3.0 3.3 3.6 V
VCOM High Voltage VCOMH - 2.5 (3.6)
4.5 V
VCOM Low Voltage VCOML - -3 (-2.4)
0 V
Supply Current IDD VDD = 3.3 V
Pattern= black *1 - 5.5 8.5 mA
Note1:Maximum current display
PH320240T-006-I-Q Page6 SAMPLE Ver.01
SPEC Edi.002
1.5 Optical Characteristics
TFT LCD Module VDDIO =3.3V, Ta=25°C
Item Symbol
Condition Min. Typ. Max.
unit
-
Response time Tr+ Tf Ta = 25°C
X, Y = 0°
- 50 53 ms
Note2
Top Y+ - 45 -
Bottom
Y- - 50 -
Left X- - 50 -
Viewing angle
Right
X+
CR 10
- 50 -
Deg.
Note4
Contrast ratio CR Ta = 25°C
X , Y = 0°
200 250 - - Note3
X 0.24 0.29 0.34
White
Y 0.27 0.32 0.37
X 0.58 0.63 0.68
Red Y 0.31 0.36 0.41
X 0.27 0.32 0.37
Green
Y 0.56 0.61 0.66
X 0.09 0.14 0.19
Color of CIE
Coordinate
With B/L
Blue Y
-
0.04 0.09 0.14
-
Average Brightness
Pattern=white display
(With B/L) *1
IV IF=20 mA 255 300 - cd/m2
Uniformity
(With B/L)*2 B IF=20 mA 70 - - %
Note1
PH320240T-006-I-Q Page7 SAMPLE Ver.01
SPEC Edi.002
Note 1:
*1B=B(min) / B(max) * 100%
*2Measurement Condition for Optical Characteristics:
aEnvironment: 25 ±5 / 6020%R.Hno winddark room below 10 Lux at typical lamp
current and typical operating frequency.
bMeasurement Distance: 500 ± 50 (= 0°)
cEquipment: TOPCON BM-7 fast(field 1)after 10 minutes operation.
dThe uncertainty of the C.I.E coordinate measurement ±0.01Average Brightness ± 4%
To be measured at the center area of panel with a viewing cone of 1° by Topcon
luminance meter BM-7, after 10 minutes operation (module)
Note2: Definition of response time:
The output signals of photo detector are measured when the input signals are changed
from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively.
The response time is defined as the time interval between the 10% and 90% of
Amplitudes.
Refer to figure as below:
Normally White
1
2
3
6
5
4
7
8
9
VIEW AREA
LCM
Colorimeter=BM-7 fast
500
100%
90%
10%
0%
Signal (Relative value)
"Black"
Tr Tf
"White" "White"
PH320240T-006-I-Q Page8 SAMPLE Ver.01
SPEC Edi.002
Normally Black
Note3: Definition of contrast ratio:
Contrast ratio is calculated with the following formula
Photo detector output when LCD is at “White” state
Contrast ratio (CR) =
Photo detector output when LCD is at “Black” state
Note4: Definition of viewing angle:
Refer to figure as below:
!
"!
#$
%&$'
!(
# #)$
*,+-
*.+/
$
%&0#)
1
1&
243
1&5'674
1&
1&)8:9;
8<5 3
PH320240T-006-I-Q Page9 SAMPLE Ver.01
SPEC Edi.002
1.6 Backlight Characteristics
Maximum Ratings
Item Symbol Conditions Min. Max. Unit
Power Dissipation PD Ta =25 0.12 W
Electrical / Optical Characteristics
Item Symbol Conditions Min. Typ. Max. Unit
Forward Voltage VF 16.8 19.2 19.6 V
Average Brightness
(without LCD) IV 3500 4300 cd/m2
X 0.30
CIE Color Coordinate
(Without LCD) Y
IF= 20 mA
0.30 -
Color White
PH320240T-006-I-Q Page10 SAMPLE Ver.01
SPEC Edi.002
2.1 Counter Drawing
2.1.1 LCM Mechanical Diagram
* See Appendix
2.1.2 Block Diagram
TFT LCD PANEL
HX8238-A One Chip
Source Driver
T-con Gate Driver
LED
Backlight
PIN54 ----------------------------------------------------------- PIN1
PH320240T-006-I-Q Page11 SAMPLE Ver.01
SPEC Edi.002
2.2 Interface Pin Description
Pin No. Symbol Function
1 VBL- Power supply for LED Backlight cathode input
2 VBL- Power supply for LED Backlight cathode input
3 VBL+ Power supply for LED Backlight anode input
4 VBL+ Power supply for LED Backlight anode input
5 NC Not used , Must be open
6 NC Not used , Must be open
7 NC Not used , Must be open. (Output Pin ,POL output.)
8 /RESET Hardware reset
9 SPENA Serial port data enable signal
10 SPCLK Serial data clock
11 SPDAT Serial data
12 B0 Blue data bit 0
13 B1 Blue data bit 1
14 B2 Blue data bit 2
15 B3 Blue data bit 3
16 B4 Blue data bit 4
17 B5 Blue data bit 5
18 B6 Blue data bit 6
19 B7 Blue data bit 7
20 G0 Green data bit 0
21 G1 Green data bit 1
22 G2 Green data bit 2
23 G3 Green data bit 3
24 G4 Green data bit 4
25 G5 Green data bit 5
26 G6 Green data bit 6
27 G7 Green data bit 7
28 R0 Red data bit 0
29 R1 Red data bit 1
30 R2 Red data bit 2
PH320240T-006-I-Q Page12 SAMPLE Ver.01
SPEC Edi.002
31 R3 Red data bit 3
32 R4 Red data bit 4
33 R5 Red data bit 5
34 R6 Red data bit 6
35 R7 Red data bit 7
36 HSYNC Horizontal sync input
37 VSYNC Vertical sync input
38 DOTCLK Dot data clock
39 VDDIO Digital power
40 VDDIO Digital power
41 VDDIO Digital power
42 VDDIO Digital power
43 NC Not used , Must be open
44 NC Not used , Must be open
45 NC Not used , Must be open (Output Pin ,VGL ,Gate off power.)
46 NC Not used , Must be open
47 NC Not used , Must be open (Output Pin ,VGH, Gate on power.)
48 NC Not used , Must be open
49 NC Not used , Must be open
50 NC Not used , Must be open
51 NC Not used , Must be open (Output Pin ,VCOM power.)
52 ENB Data enable control
53 VSS Ground
54 VSS Ground
PH320240T-006-I-Q Page13 SAMPLE Ver.01
SPEC Edi.002
2.3 Timing Characteristics
NoteThe interface of this module can drive by digital 24-bit data.
PH320240T-006-I-Q Page14 SAMPLE Ver.01
SPEC Edi.002
2.3.1 SPI Read
PH320240T-006-I-Q Page15 SAMPLE Ver.01
SPEC Edi.002
2.3.2 SPI Write
2.3.3 SPI Timing Table
PH320240T-006-I-Q Page16 SAMPLE Ver.01
SPEC Edi.002
2.4 Power Sequence
2.4.1 Power up sequence
Note1The voltage of VDD be boosted from VDDIO.
PH320240T-006-I-Q Page17 SAMPLE Ver.01
SPEC Edi.002
2.4.2 Power down sequence
Note1The voltage of VDD be boosted from VDDIO.
PH320240T-006-I-Q Page18 SAMPLE Ver.01
SPEC Edi.002
2.5 Reference Initial code
Register(0x0001);
Data(0x7300);
Register(0x0002);
Data(0x0200);
Register(0x0003);
Data(0x6164);
Register(0x0004);
Data(0x04C7);
Register(0x0005);
Data(0xFC80);
Register(0x00,0x0A); //Contrast/Brightness control;
Data(0x4008);
Register(0x00,0x0D); //Power control(2);
Data(0x3229);
Register(0x00,0x0E); //Power control(3);VOML
Data(0x3200);
*******************************************************************************
Flicker!!! Plz , download below.
Register(0x00,0x1E); //Power control(4);COMH
Data(0x00DF);
*******************************************************************************
PH320240T-006-I-Q Page19 SAMPLE Ver.01
SPEC Edi.002
3. QUALITY ASSURANCE SYSTEM
3.1 Quality Assurance Flow Chart
Item Customer
Sales R&D Q.A Manufactu
ring
Product
control Purchase
Inventory
control
Marketing
&
Design
Sample
Approval
Pilot
Run
&
Mass
Product
Ship
Out
OK
Request
Info
Survey
Inquiry
Project evaluation
Project Validation
Quote
OK
NG
Contract
Design check
Sample test
Verification
Sample approval
NG
NG
Pilot run & Reliability test
Verification
Specification preparation
OK
Mass production
Inspection
NG
OK
Shipment
NG
Ship out
OK
PH320240T-006-I-Q Page20 SAMPLE Ver.01
SPEC Edi.002
Item Customer
Sales R&D Q.A Manufact
uring
Product
control Purchase
Inventory
control
Sales
Service
Q.A
Activity
1. ISO 9001 Maintenance Activities 2. Process improvement proposal
3. Equipment calibration 4. Education And Training Activities
5. Standardization Management
Info
Claim
Failure analysis
Corrective action
Tracking
Analysis report
PH320240T-006-I-Q Page21 SAMPLE Ver.01
SPEC Edi.002
3.2 Inspection Specification
PH320240T-006-I-Q Page22 SAMPLE Ver.01
SPEC Edi.002
PH320240T-006-I-Q Page23 SAMPLE Ver.01
SPEC Edi.002
PH320240T-006-I-Q Page24 SAMPLE Ver.01
SPEC Edi.002
PH320240T-006-I-Q Page25 SAMPLE Ver.01
SPEC Edi.002
PH320240T-006-I-Q Page26 SAMPLE Ver.01
SPEC Edi.002
PH320240T-006-I-Q Page27 SAMPLE Ver.01
SPEC Edi.002
PH320240T-006-I-Q Page28 SAMPLE Ver.01
SPEC Edi.002
4. RELIABILITY TEST
4.1 Reliability Test Condition
NO.
TEST ITEM TEST CONDITION
High Temperature
Storage Test
Keep in
hrs
Surrounding temperature, then storage at normal condition
hrs.
Low Temperature
Storage Test
Keep in
hrs
Surrounding temperature, then storage at normal condition
hrs.
High Temperature /
High Humidity
Storage Test
Keep in
/
% R.H duration for
hrs
Surrounding temperature, then storage at normal condition
hrs.
(Excluding the polarizer)
Air Discharge:
Apply
KV with
times
Discharge for each polarity +/-
Contact Discharge:
Apply
V with
times
discharge for each polarity +/-
ESD Test
1. Temperature ambiance :
2. Humidity relative :
%
%
3. Energy Storage Capacitance(Cs+Cd) :
pF
%
4. Discharge Resistance(Rd) :
%
5. Discharge, mode of operation :
Single Discharge (time between successive discharges at least
1 sec) (Tolerance if the output voltage indication :
%)
Temperature Cycling
Storage Test
(
mins) (
mins) (
mins) (
mins)
Cycle
Surrounding temperature, then storage at normal condition
hrs.
Vibration Test
(Packaged)
1. Sine wave
Hz frequency (
min)
2. The amplitude of vibration :
mm
3. Each direction (X
Y
Z) duration for
Hrs
Drop Test
(Packaged)
Drop direction :
1 corner /
edges /
sides each
times
Packing Weight
(Kg)
Drop Height (cm)
Ver.02
PH320240T-006-I-Q Page29 SAMPLE Ver.01
SPEC Edi.002
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 SAFETY
5.1.1 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin.
5.1.2 If the liquid crystal touches your skin or clothes , please wash it off immediately by
using soap and water.
5.2 HANDLING
5.2.1 Avoid any strong mechanical shock which can break the glass.
5.2.2 Avoid static electricity which can damage the CMOS LSI—When working with the
module , be sure to ground your body and any electrical equipment you may be using.
5.2.3 Do not remove the panel or frame from the module.
5.2.4 The polarizing plate of the display is very fragile. So , please handle it very
carefully ,do not touch , push or rub the exposed polarizing with anything harder
than an HB pencil lead (glass , tweezers , etc.)
5.2.5 Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the
surface of plate.
5.2.6 Do not touch the display area with bare hands , this will stain the display area.
5.2.7 Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with
a cleaning naphtha solvent.
5.2.8 To control temperature and time of soldering is 32010and 3-5 sec.
5.2.9 To avoid liquid (include organic solvent) stained on LCM .
5.3 STORAGE
5.3.1 Store the panel or module in a dark place where the temperature is 25 5
and the humidity is below 65% RH.
5.3.2 Do not place the module near organics solvents or corrosive gases.
5.3.3 Do not crush , shake , or jolt the module.
5.4 TERMS OF WARRANTY
5.4.1 Applicable warrant period
The period is within thirteen months since the date of shipping out under normal
using and storage conditions.
5.4.2 Unaccepted responsibility
This product has been manufactured to your company’s specification as a part for
use in your company’s general electronic products. It is guaranteed to perform
according to delivery specifications. For any other use apart from general
electronic equipment , we cannot take responsibility if the product is used in
nuclear power control equipment , aerospace equipment , fire and security
systems or any other applications in which there is a direct risk to human life
and where extremely high levels of reliability are required.
