1
Motorola Optoelectronics Device Data
  
 
The 4N25/A, 4N26, 4N27 and 4N28 devices consist of a gallium arsenide
infrared emitting diode optically coupled to a monolithic silicon phototransistor
detector.
Most Economical Optoisolator Choice for Medium Speed, Switching Applications
Meets or Exceeds All JEDEC Registered Specifications
To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Applications
General Purpose Switching Circuits
Interfacing and coupling systems of different potentials and impedances
I/O Interfacing
Solid State Relays
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating Symbol Value Unit
INPUT LED
Reverse Voltage VR3 Volts
Forward Current — Continuous IF60 mA
LED Power Dissipation @ TA = 25°C
with Negligible Power in Output Detector
Derate above 25°C
PD120
1.41
mW
mW/°C
OUTPUT TRANSISTOR
Collector–Emitter Voltage VCEO 30 Volts
Emitter–Collector Voltage VECO 7 Volts
Collector–Base Voltage VCBO 70 Volts
Collector Current — Continuous IC150 mA
Detector Power Dissipation @ TA = 25°C
with Negligible Power in Input LED
Derate above 25°C
PD150
1.76
mW
mW/°C
TOTAL DEVICE
Isolation Surge Voltage(1)
(Peak ac Voltage, 60 Hz, 1 sec Duration) VISO 7500 Vac(pk)
Total Device Power Dissipation @ TA = 25°C
Derate above 25°CPD250
2.94 mW
mW/°C
Ambient Operating Temperature Range(2) TA55 to +100 °C
Storage Temperature Range(2) Tstg 55 to +150 °C
Soldering Temperature (10 sec, 1/16 from case) TL260 °C
1. Isolation surge voltage is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
Order this document
by 4N25/D

SEMICONDUCTOR TECHNICAL DATA
GlobalOptoisolator





*Motorola Preferred Devices
SCHEMATIC
PIN 1. LED ANODE
2. LED CATHODE
3. N.C.
4. EMITTER
5. COLLECTOR
6. BASE
1
2
3
6
5
4
[CTR = 20% Min]
[CTR = 10% Min]
STANDARD THRU HOLE
CASE 730A–04
STYLE 1 PLASTIC
61





Motorola, Inc. 1995
REV 5
    
2 Motorola Optoelectronics Device Data
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)(1)
Characteristic Symbol Min Typ(1) Max Unit
INPUT LED
Forward Voltage (IF = 10 mA) TA = 25°C
TA = –55°C
TA = 100°C
VF
1.15
1.3
1.05
1.5
Volts
Reverse Leakage Current (VR = 3 V) IR 100 µA
Capacitance (V = 0 V, f = 1 MHz) CJ 18 pF
OUTPUT TRANSISTOR
Collector–Emitter Dark Current 4N25,25A,26,27
(VCE = 10 V, TA = 25°C 4N28 ICEO
1
150
100 nA
(VCE = 10 V, TA = 100°C) All Devices ICEO 1 µA
Collector–Base Dark Current (VCB = 10 V) ICBO 0.2 nA
Collector–Emitter Breakdown Voltage (IC = 1 mA) V(BR)CEO 30 45 Volts
Collector–Base Breakdown Voltage (IC = 100 µA) V(BR)CBO 70 100 Volts
Emitter–Collector Breakdown Voltage (IE = 100 µA) V(BR)ECO 7 7.8 Volts
DC Current Gain (IC = 2 mA, VCE = 5 V) hFE 500
Collector–Emitter Capacitance (f = 1 MHz, VCE = 0) CCE 7 pF
Collector–Base Capacitance (f = 1 MHz, VCB = 0) CCB 19 pF
Emitter–Base Capacitance (f = 1 MHz, VEB = 0) CEB 9 pF
COUPLED
Output Collector Current (IF = 10 mA, VCE = 10 V) 4N25,25A,26
4N27,28
IC (CTR)(2) 2 (20)
1 (10) 7 (70)
5 (50)
mA (%)
Collector–Emitter Saturation Voltage (IC = 2 mA, IF = 50 mA) VCE(sat) 0.15 0.5 Volts
Turn–On Time (IF = 10 mA, VCC = 10 V, RL = 100 )(3) ton 2.8 µs
Turn–Off Time (IF = 10 mA, VCC = 10 V, RL = 100 )(3) toff 4.5 µs
Rise Time (IF = 10 mA, VCC = 10 V, RL = 100 )(3) tr 1.2 µs
Fall Time (IF = 10 mA, VCC = 10 V, RL = 100 )(3) tf 1.3 µs
Isolation Voltage (f = 60 Hz, t = 1 sec)(4) VISO 7500 Vac(pk)
Isolation Resistance (V = 500 V)(4) RISO 1011
Isolation Capacitance (V = 0 V, f = 1 MHz)(4) CISO 0.2 pF
1. Always design to the specified minimum/maximum electrical limits (where applicable).
2. Current Transfer Ratio (CTR) = IC/IF x 100%.
3. For test circuit setup and waveforms, refer to Figure 11.
4. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
    
3
Motorola Optoelectronics Device Data
IC, OUTPUT COLLECTOR CURRENT (NORMALIZED)
TYPICAL CHARACTERISTICS
Figure 1. LED Forward Voltage versus Forward Current
2
1.8
1.6
1.4
1.2
1110 100 1000
10
1
0.1
0.01 0.5 1
IF, LED FORWARD CURRENT (mA) 2 5 10 20 50
IF, LED INPUT CURRENT (mA)
VF, FORWARD VOLTAGE (VOLTS)
25
°
C
100
°
C
TA = –55
°
C
NORMALIZED TO:
IF = 10 mA
Figure 2. Output Current versus Input Current
PULSE ONLY
PULSE OR DC
10
7
5
2
1
0.7
0.5
0.2
0.1 –60 –40 –20 0 20 40 60 80 100
TA, AMBIENT TEMPERATURE (
°
C)
IC, OUTPUT COLLECTOR CURRENT (NORMALIZED)
1
10
100
0.1 0 20 40 60 80 100
TA, AMBIENT TEMPERATURE (
°
C)
t, TIME ( s)
I
100
50
20
10
5
2
1
0.1 0.2 0.5 1 2 5 10 20 50 100
IF, LED INPUT CURRENT (mA)
CEO, COLLECTOR–EMITTER DARK CURRENT
(NORMALIZED)
µ
VCE = 30 V
10 V
tf
tr
tr
tf
0
VCE, COLLECTOR–EMITTER VOLTAGE (VOLTS)
IC, COLLECTOR CURRENT (mA)
4
8
12
16
20
24
28
5 mA
2 mA
1 mA
0 1 2 3 4 5 6 7 8 9 10
Figure 3. Collector Current versus
Collector–Emitter Voltage Figure 4. Output Current versus Ambient Temperature
Figure 5. Dark Current versus Ambient Temperature Figure 6. Rise and Fall Times
(Typical Values)
IF = 10 mA NORMALIZED TO TA = 25
°
C
NORMALIZED TO:
VCE = 10 V
TA = 25
°
C
VCC = 10 V
RL = 1000
RL = 100{{
    
4 Motorola Optoelectronics Device Data
100
70
50
20
10
7
5
2
10.1 0.2 0.5 0.7 1 2 5 7 10 20 50 70100
IF, LED INPUT CURRENT (mA)
RL = 1000
100
10
100
70
50
20
10
7
5
2
10.1 0.2 0.5 0.7 1 2 5 7 10 20 50 70100
IF, LED INPUT CURRENT (mA)
RL = 1000
100
10
t , TURN–OFF TIME ( s)
off
µ
t , TURN–ON TIME ( s)
on
µ
Figure 7. Turn–On Switching Times
(Typical Values) Figure 8. Turn–Off Switching Times
(Typical Values)
VCC = 10 V VCC = 10 V
6
6
µ
A
C, CAPACITANCE (pF)
Figure 9. DC Current Gain (Detector Only) Figure 10. Capacitances versus Voltage
20
18
16
14
12
10
8
4
2
0
CCE
f = 1 MHz
0.05 0.1 0.2 0.5 1 2 5 10 20 50
V, VOLTAGE (VOLTS)
CLED
CCB
CEB
5
µ
A
4
µ
A
3
µ
A
2
µ
A
1
µ
A
4
3
2
1
0 2 4 6 8 10 12 14 16 18 20
VCE, COLLECTOR–EMITTER VOLTAGE (VOLTS)
IC, TYPICAL COLLECTOR CURRENT (mA)
IB = 7
µ
A
IF = 0
TEST CIRCUIT
VCC = 10 V
IF = 10 mA
INPUT
RL = 100
OUTPUT
WAVEFORMS
10%
90%
ton
INPUT PULSE
OUTPUT PULSE
tf
toff
tr
Figure 11. Switching Time Test Circuit and Waveforms
    
5
Motorola Optoelectronics Device Data
PACKAGE DIMENSIONS
CASE 730A–04
ISSUE G
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
STYLE 1:
PIN 1. ANODE
2. CATHODE
3. NC
4. EMITTER
5. COLLECTOR
6. BASE
6 4
1 3
–A–
–B–
SEATING
PLANE
–T–
4 PLF
K
C
N
G
6 PLD
6 PLE
M
A
M
0.13 (0.005) B M
T
L
M
6 PLJ
M
B
M
0.13 (0.005) A M
T
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.320 0.350 8.13 8.89
B0.240 0.260 6.10 6.60
C0.115 0.200 2.93 5.08
D0.016 0.020 0.41 0.50
E0.040 0.070 1.02 1.77
F0.010 0.014 0.25 0.36
G0.100 BSC 2.54 BSC
J0.008 0.012 0.21 0.30
K0.100 0.150 2.54 3.81
L0.300 BSC 7.62 BSC
M0 15 0 15
N0.015 0.100 0.38 2.54
_ _ _ _
CASE 730C–04
ISSUE D
–A–
–B–
S
SEATING
PLANE
–T–
J
K
L
6 PL
M
B
M
0.13 (0.005) A M
T
C
D6 PL
M
A
M
0.13 (0.005) B M
T
H
G
E6 PL
F4 PL
31
46
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.320 0.350 8.13 8.89
B0.240 0.260 6.10 6.60
C0.115 0.200 2.93 5.08
D0.016 0.020 0.41 0.50
E0.040 0.070 1.02 1.77
F0.010 0.014 0.25 0.36
G0.100 BSC 2.54 BSC
H0.020 0.025 0.51 0.63
J0.008 0.012 0.20 0.30
K0.006 0.035 0.16 0.88
L0.320 BSC 8.13 BSC
S0.332 0.390 8.43 9.90
*Consult factory for leadform
option availability
    
6 Motorola Optoelectronics Device Data
*Consult factory for leadform
option availability
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
CASE 730D–05
ISSUE D
6 4
1 3
–A–
–B–
N
C
K
G
F4 PL
SEATING
D6 PL
E6 PL
PLANE
–T–
M
A
M
0.13 (0.005) B M
T
L
J
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.320 0.350 8.13 8.89
B0.240 0.260 6.10 6.60
C0.115 0.200 2.93 5.08
D0.016 0.020 0.41 0.50
E0.040 0.070 1.02 1.77
F0.010 0.014 0.25 0.36
G0.100 BSC 2.54 BSC
J0.008 0.012 0.21 0.30
K0.100 0.150 2.54 3.81
L0.400 0.425 10.16 10.80
N0.015 0.040 0.38 1.02
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty , representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability , including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customers technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body , or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Af firmative Action Employer .
How to reach us:
USA/ EUROPE: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3142 Tatsumi KotoKu, Tokyo 135, Japan. 03–35218315
MFAX: RMFAX0@email.sps.mot.com – TOUCHTONE (602) 244–6609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 85226629298
4N25/D
*4N25/D*