ACD2000 - TEKTRONIX - Datasheet.Live

Features & Benefits

Key Performance

Specifications

– 100 MHz and 200 MHz bandwidth

models

– 2 or 4 analog channels

– 16 digital channels (MSO2000 Series)

– Sample rates up to 1 GS/s on

all channels

– 1 Mega sample record length on

all channels

– 5,000 wfm/s maximum waveform

capture rate

– Suite of advanced triggers

Serial Bus Trigger and

Decode

– I2C, SPI, CAN, LIN, and RS-232/

422/485/UART serial triggering,

decode, and analysis options

Ease of Use Features

– Wave Inspector®Navigation and

Search provides unprecedented

efficiency in waveform analysis

– FilterVuTM variable low-pass filter

allows for removal of unwanted

signal noise while still capturing

high-frequency events

– 7 in (180 mm) bright, widescreen,

TFT-LCD color display

– USB 2.0 on front panel for quick

and easy data storage

– USB 2.0 device port on rear panel

for direct PC control of oscilloscope

using USBTMC or direct printing to

any PictBridge®compatible printer

– Plug ‘n’ Play PC connectivity

and analysis software solutions

– TekVPI®Probe Interface supports

active, differ ential, and current probes

for automatic scaling and units

– Small footprint and light weight -

only 5.3 in (134 mm) deep and 7 lb

14 oz (3.6 kg)

Mixed Signal Design and

Analysis (MSO2000 Series)

– Ability to time correlate up to 4

analog and 16 digital channels

– Parallel bus trigger and analysis

– Multichannel setup and hold triggering

– Next-generation digital waveform

display

Applications

– Embedded design and debug

– Mixed signal design and debug

– Power measurements

– Automotive electronics

– Education and training

– Video design and debug

Digital Phosphor Oscilloscopes

MSO2000 Series • DPO2000 Series

The Power to Solve Problems Quickly -

The MSO2000 and DPO2000 Series

digital phosphor oscilloscopes (DPOs)

deliver the performance and tools you

need to visualize your signals and find

answers quickly. The DPO2000 Series

are the first oscilloscopes to provide

1 M points of usable record length on

all channels, serial trigger and decode

analysis options, a variable low-pass

filter that also allows you to see signal

details to the oscilloscope’s full band-

width and all in a compact form factor.

The MSO2000 Series adds 16 integrated

digital channels, enabling you to visualize

and time correlate analog and digital

signals on a single instrument. This inte-

gration extends triggering functionality

across all 20 channels - which is ideal

for debugging mixed analog and

digital designs.

Designed to Make

Your Work Easier

W ave Inspector®Navigation and Search

Imagine trying to efficiently use the

Internet if search engines such as

Google and Yahoo didn’t exist and

Web browser features such as Favorites

and Links didn’t exist. Now you know

how most modern oscilloscope users

feel when trying to use the long record

length in their digital oscilloscope.

Record length, one of the key specifi-

cations of an oscilloscope, is the number

of samples it can digitize and store in

a single acquisition. The longer the

record length, the longer the time

window you can capture with high

timing resolution (high sample rate).

The first digital oscilloscopes could

capture and store only 500 points,

which made it very difficult to acquire

all relevant information around the event

being investigated. Over the years,

oscilloscope vendors have provided

longer and longer record lengths to

meet market demands for long capture

windows with high resolution. These

mega-point record lengths often

represent thousands of screens worth

of signal activity. While standard record

lengths have increased greatly over

Tektronix MSO2000 and DPO2000 Series Digital Phosphor Oscilloscopes

Feature-Rich Tools for Debugging Mixed Signal Designs.

Digital phosphor technology enables 5,000

waveforms/second waveform ca pture and

real-time intensity grading on the MSO2000

and DPO2000 Series.

Digital Phospor Oscilloscopes

MSO2000 Series • DPO2000 Series

Digital Phosphor Oscilloscopes • www.tektronix.com/mso2000 • www.tektronix.com/dpo2000

the years and can now satisfy the vast

majority of applications in the market-

place, tools for effectively and efficiently

viewing, navigating, and analyzing

long record length acquisitions have

been sorely neglected until now.

The Tektronix MSO/DPO2000 Series

redefines expectations for working with

long record lengths with the following

innovative Wave Inspector controls:

Zoom/Pan - A dedicated, two-tier

front-panel control provides intuitive

control of both zooming and panning.

The inner control adjusts the zoom

factor (or zoom scale); turning it clock-

wise activates zoom and goes to

progr essively higher zoom factors, while

turning it counterclockwise results in

lower zoom factors and eventually turning

zoom off. The outer control pans the

zoom box across the waveform to quickly

get to the portion of the waveform you

are interested in.

The outer control also utilizes force-

feedback to determine how fast to

pan on the waveform. The farther you

turn the outer control, the faster the

zoom box moves. Pan direction is

changed by simply turning the control

the other way. No longer do you need

to navigate through multiple menus to

adjust your zoom view.

Play/Pause - A dedicated play/pause

button on the front panel scrolls the

waveform across the display automatically

while you look for anomalies or an event

of interest. Playback speed and dir ection

are contr olled using the intuitive pan control.

Once again, turning the control further

makes the waveform scroll faster and

changing direction is as simple as

turning the control the other way.

User Marks - See something interesting

on your waveform? Press the Set Mark

button on the front panel to leave one

or more “bookmarks” on the waveform.

Navigating between marks is as simple

as pressing the Previous ( ) and

Next ( )buttons on the front panel.

Search Marks - Don’t want to take

the time to inspect the entire acquisition

manually to find the event you’re looking

for? The MSO/DPO2000 Series features

a robust automatic waveform search

feature that allows you to sear ch thr ough

your long acquisition based on user -defined

criteria. All occurrences of the event are

highlighted with search marks and are

easily navigated to, using the front-panel

Previous ( ) and Next ()

buttons. Search types include edge,

pulse width, runt, logic, setup and hold,

rise/fall time and parallel, I2C, SPI, RS-

232/422/485/ UART, CAN, and LIN

packet content.

Wave Inspector controls provide unprecedented efficiency in viewing,navigating, and analyzing waveform

data. Zip through your 1 M point record by turning the outer pan control (2). Get from the beginning to

end in seconds. See something of interest and want to see more details? Just turn the inner zoom

control (1).

Search step 1:You define what you would like

to find.

Search step 2: MSO/DPO2000 automatically

searches through the record and marks each

event with a hollow white triangle.

Search step 3: Use previous and next buttons

to jump from one event to the next.

Digital Phospor Oscilloscopes

MSO2000 Series • DPO2000 Series

Digital Phosphor Oscilloscopes • www.tektronix.com/mso2000 • www.tektronix.com/dpo2000 3

See the MSO/DPO2000

Series in action for yourself.

Try out the MSO/DPO2000

Virtual Oscilloscope at:

www.tektronix.com/mso2000

Serial Triggering and Analysis

One of the most common applications

requiring long r ecord length is serial data

analysis in embedded system design.

Embedded systems are virtually every-

where. They can contain many different

types of devices including microproces-

sors, microcontrollers, DSPs, RAM,

EEPROMs, FPGAs, ADCs, DACs, and

I/O. These various devices have tradi-

tionally communicated with each other

and the outside world using wide parallel

buses. Today, however, more and more

embedded systems are replacing these

wide parallel buses with serial buses

due to lower board space r equirements,

fewer pins, lower power, embedded

clocks, differential signaling for better

noise immunity and most importantly,

lower cost. In addition, there’s a large

supply of off-the-shelf building block

components from reputable manufac-

turers, enabling rapid design development.

While serial buses have a large number

of benefits, they also present significant

challenges that their predecessors (parallel

buses) did not face.They make debug-

ging bus and system problems more

difficult, it’s harder to isolate events of

interest and it’s more difficult to interpret

what is displayed on the oscilloscope

screen. The MSO2000 and DPO2000

Series address these challenges and

represent the ultimate tool for engi-

neers working with serial buses such

as I2C, SPI, RS-232/422/ 485/UART,

CAN, and LIN.

Bus Display - Provides a higher level,

combined view of the individual signals

(clock, data, chip enable, etc.) that make

up your bus, making it easy to identify

where packets begin and end and

identifying sub-packet components such

as address, data, identifier, CRC, etc.

Serial Triggering - Trigger on packet

content such as start of packet, specific

addresses, specific data content, unique

identifiers, etc., on popular serial inter-

faces - I2C, SPI, RS-232/422/485/UART,

CAN, and LIN.

Bus Decoding - Tired of having to

visually inspect the waveform to count

clocks and determine if each bit is a 1

or a 0, and then combine bits into bytes

and determine the hex value? Let the

oscilloscope do it for you! Once you’ve

set up a bus, the oscilloscope will decode

each packet on the bus and display the

value in either hex, binary, decimal (LIN

only), or ASCII (RS-232/422/485/UART

only) in the bus waveform.

Event Table - In addition to seeing

decoded packet data on the bus wave-

form itself, you can view all captured

packets in a tabular view much like you

would see on a logic analyzer. Packets

are time-stamped and listed consecu-

tively with columns for each component

(Address, Data, etc.). The event table

can also be exported for use offline.

Search - Serial triggering is very useful

for isolating an event of interest, but

once you’ve captured it and need to

analyze the surrounding data, what do

you do? In the past, you had to manually

scroll through the waveform, counting

and converting bits and looking for what

caused the event. With the MSO2000

and DPO2000 Series, you can have the

oscilloscope automatically search thr ough

the acquired data for user-defined criteria

including serial packet content. Each

occurrence is marked for easy r efer ence.

Rapid navigation between marks is as

simple as pressing the Previous ( ) and

Next ( ) buttons on the front panel.

Mixed Signal Design and Analysis

(MSO2000 Series)

As an embedded-design engineer, you

are faced with the challenge of ever-

increasing system complexity. A typical

embedded design may incorporate

various analog signals, high- and low-

speed serial digital communication and

microprocessor buses, just to name a

few. Serial protocols such as I2C and

SPI are used frequently for chip-to-chip

communication, but parallel buses are

still used in many applications.

MSO/DPO2000 triggered on a specific data packet going across an I2C bus. No more counting clock

edges and 1s and 0s.A Bus waveform provides decoded packet content including Start, Address,

Read/Write, Data, and Stop.And the addition of timing waveforms makes it easy to quickly determine

values of two signals.

The P6316 digital probe for MSO2000 Series

simplifies connection to the device-under-test

Digital Phospor Oscilloscopes

MSO2000 Series • DPO2000 Series

Microprocessors, FPGAs, Analog-to-

Digital Converters (ADCs), and Digital-

to-Analog Converters (DACs) are all

examples of ICs that present unique

measurement challenges in today’s

embedded designs. The MSO2000

Series Mixed Signal Oscilloscopes offer

the addition of 16 digital channels. These

channels are tightly integrated into the

oscilloscope’s user interface, simplifying

operation and making it possible to

solve mixed signal issues easily.

Next Generation Digital

Waveform Display

In a continued effort to make mixed

signal oscilloscopes easy to use, the

MSO2000 Series has redefined the

way you view digital waveforms. One

common problem shared by both logic

analyzers and mixed signal oscilloscopes

is determining if data is a one or a zero

when zoomed in far enough that the

digital trace stays flat all the way across

the display. The MSO2000 has color-

coded the digital traces, displaying ones

in green and zeros in blue. In addition,

the MSO2000 displays white edges

around the transition points of digital

channels when there is uncertainty

between sample points. This acts as

a visual reminder that increasing the

sample rate on the next acquisition will

reveal higher frequency information than

your previous settings could acquire.

Channel setup on an MSO can often

be time consuming as compared to the

traditional oscilloscope. This process

often includes probing the device under-

test, labeling the channels, and positioning

the channels on screen. The MSO2000

simplifies this process by allowing the

user to group digital waveforms and

enter waveform labels using a USB

keyboard. By simply placing digital

waveforms next to each other, they form

a group. Once a group is formed, you

can position all the channels contained

in that group together. This greatly r educes

the normal setup time associated with

positioning channels individually.

P6316 MSO Probe

This unique probe design offers two

eight-channel pods and simplifies the

process of connecting to the device-

under-test. When connecting to square

pins, the P6316 can connect directly to

8x2 square pin headers spaced on

tenth-inch centers. When more attach-

ment flexibility is required, you can use

the included flying lead sets and grab-

bers to clip onto surface mount devices

or test points. The P6316 offers

outstanding electrical characteristics

applying only 8 pF of loading with

101 kΩinput impedance.

FilterVuTM Variable Low-Pass Filter

Tired of being limited to a 20 MHz

bandwidth filter in your oscilloscope?

Simply turn on FilterVu and adjust the

variable low-pass noise filter. Unlike

other variable low-pass filters, FilterVu

filters out the unwanted noise from your

signal while still capturing glitches and

other signal details up to the full band-

width of the oscilloscope. It does this

by showing two waveforms: a waveform

that can be filtered (for egr ound waveform)

and a glitch capture waveform (back-

ground waveform).

The filtered waveform uses a variable

low-pass filter to block out noise,

yielding a cleaner waveform to more

precisely locate signal edges and ampli-

tude levels. The result is improved

confidence in you cursor measure-

ments and cleaner documentation of

important signal attributes. When the

noise filter is adjusted to the lowest

available noise cutoff frequency, no

more than 1% of high-fr equency content

that could cause the oscilloscope to

alias will pass through the filter.

The glitch capture waveform shows

signal details up to the full bandwidth

of the oscilloscope. The oscilloscope

captures pulses as narrow as 5 ns,

using peak detect min/max sampling,

protecting you fr om missing unexpected

glitches or other high-frequency events.

FilterV u is ideal for r epetitive, nonr epetitive

and single-shot events.

Digital Phosphor Oscilloscopes • www.tektronix.com/mso2000 • www.tektronix.com/dpo2000

Output of DAC Signal) Notice how FilterVuTM clearly shows the noise-free steps of the DAC in the foreground

trace (yellow) which has removed all frequencies above 5.5 kHz. FilterVu also captures and displays high-

frequency glitches up to the full bandwidth of the oscilloscope in the background trace (orange).

Digital Phosphor Oscilloscopes • www.tektronix.com/mso2000 • www.tektronix.com/dpo2000 5

Digital Phospor Oscilloscopes

MSO2000 Series • DPO2000 Series

PC Connectivity and

USB Data Storage

The MSO2000 and DPO2000 Series

provides flexibility in data transfer with

standard USB host and device ports

which enable removable data storage,

seamless PC connectivity, and direct

printing. Also available are optional

GPIB, LAN, and Video-Out adaptors.

Easily capture, save and analyze

measurement results with OpenChoice®

Desktop PC Communications software.

Simply pull screen images and wave-

form data into the stand-alone desktop

application or directly in Microsoft Word

and Excel. To complement OpenChoice,

National Instruments LabVIEW

SignalExpressTM Tektr onix Edition

software provides you with extended

capabilities, including advanced analysis,

remote oscilloscope control and live

waveform analysis. Alternatively, if you

prefer not to use the PC, you can simply

print your image directly to any

PictBridge®compatible printer using

the USB device port.

TekVPI®Probing

The TekVPI probe interface sets the

standard for ease of use in probing.

TekVPI probes feature status indicators

and controls, as well as a probe menu

button right on the input compensation

box itself. This button brings up a probe

menu on the oscilloscope display with

all relevant settings and controls for the

probe. The TekVPI interface utilizes a

new probe power management archi-

tecture enabling direct attachment of

current probes (Requires TekVPI

External Power Supply - Tektronix Part

number: 119-7465-xx). Finally, TekVPI

probes can be controlled remotely

by using USB, GPIB, or Ethernet,

enabling more versatile solutions in

ATE environments.

Easily capture,save and analyze measurement results. NI LabVIEW SignalExpressTM Tektronix Edition -

Fully interactive measurement acquisition

and analysis software developed jointly with

National Instruments, and optimized for the

MSO/DPO2000 Series.

e*Scope enables control of your network

connected oscilloscope from any network

connected PC through a traditional

browser interface.

Digital Phosphor Oscilloscopes • www.tektronix.com/mso2000 7

Digital Phospor Oscilloscopes

MSO2000 Series • DPO2000 Series

Digital Phospor Oscilloscopes

MSO2000 Series • DPO2000 Series

Digital Phosphor Oscilloscopes • www.tektronix.com/mso2000

Dedicated Vertical Controls – Vertical

controls provide simple and intuitive operation.

No longer do you need to share one set of

vertical controls across all four channels.

Large Widescreen, Digital Phosphor

Display – The MSO/DPO2000 Series boasts

a bright, 7 inch (180 mm), widescreen display.

Discover and troubleshoot design problems faster

with 5,000 waveforms/second continuous wave-

form capture rate and real time intensity grading.

Continuous high waveform capture rate saves time

by quickly revealing the nature of faults so advanced

triggers can be applied to isolate them. Real time

intensity grading exposes the “history” of a signal’s

activity as they accumulate.The digital phosphor

display makes its easier to understand the charac-

teristics of the transients you have captured. It

intensifies the areas where the signal trace

occurs more frequently.

FilterVu™ Variable Low-Pass Filter –

Tired of dealing with unwanted noise on your

signal? Ever wished your oscilloscope had band-

width limiters below 20 MHz? Simply turn on

FilterVu and adjust the variable low-pass noise

filter. Unlike other variable low pass filters,

FilterVu filters out the unwanted noise from your

signal while still capturing glitches and other

signal details up to the full bandwidth of the

oscilloscope. FilterVu is ideal for repetitive,

single-shot and non-repetitive events.

Zoom/Pan – Dedicated front panel controls for

zooming and panning.Get from the start to the end

of your 1 M record in seconds.The inner control

adjusts the zoom factor while the outer ring adjust

pans the zoom box across the waveform.Navigating

your waveform has never been easier.

Marks – Want to mark your waveform for future

reference or for quick navigation between events of

interest? Simply press the Set Mark button to place

“bookmarks” on your waveform. Use the Next and

previous buttons to navigate through user marks

and search generated marks.

Serial Trigger and Decode Application

Module – MSO/DPO2000 Series have 2 slots for

application modules.Application specific modules

extend how you use your oscilloscope by adding

serial bus triggering and decode. DPO2AUTO –

Automotive serial bus triggering and decode with

support for CAN and LIN buses. DPO2COMP-

Computer bus serial triggering and decode with

support for RS-232/422/485/UART buses.

DPO2EMBD – Embedded bus serial triggering

and decode with support for I2C and SPI buses.

USB – Use the front-panel USB host port for

simple and convenient storage of screenshots,

waveform data, and oscilloscope setups. Use the

rear-panel USB device port to easily communi-

cate and control your oscilloscope from a PC.

Or use the rear-panel USB device port to directly

print your screen image to any PictBridge®

compatible printer.

TekVPI®– TekVPI probe interface provides for

direct-connect current probes, intuitive comp box

controls, remote control of probe settings and

smarter communication between the oscilloscope

and the probe.

678 11

910

8 9

Search – Tired of turning the horizontal position

control endlessly on your current scope to find the

event you’re looking for? Use the MSO/DPO2000’s

powerful Search feature to automatically find and

mark all occurrences of an event based on user

specified criteria. Search types include edge, pulse

width, runt, logic, multichannel setup and hold,

rise/fall time and I2C, SPI, CAN, LIN, and RS-

232/422/485/UART packet content.

2 or 4 Analog Channels and 16 Digital

Channels – View and trigger on up to 20 time

correlated signals on the same display. (16 Digital

Channels on MSO models only.)

Parallel and Serial Buses – Trigger on parallel

or serial packet level content,view acquired data as a

bus with all data decoded into hex,binar y or ASCII,

search through acquisitions for specific content and

even view all decoded data in a tabular format,much

like you would see on a logic analyzer. Standards

supported include I2C,SPI,CAN,LIN,and RS-232/

422/485/UART.Analyze up to two buses at the same

time.(Parallel is available on MSO models only.)

See the MSO/DPO2000 Series in action for yourself.

Try out the MSO/DPO2000 Virtual Oscilloscope at:

www.tektronix.com/virtualmso2000

Optional LAN and VGA video ports!

- Connect your oscilloscope to your network to

remotely control and collect data. Display your

screen on an external monitor or projector.

Only 5.3 inches deep!

- Free up valuable space on your bench or desktop.

Digital Phospor Oscilloscopes

MSO2000 Series • DPO2000 Series

Digital Phosphor Oscilloscopes • www.tektronix.com/mso2000 • www.tektronix.com/dpo2000

Horizontal System - Analog Channels

MSO2012 MSO2014 MSO2024

DPO2012 DPO2014 DPO2024

Maximum Sample Rate (all channels) 1 GS/s

Minimum Peak Detect Pulse Width 7.0 ns 3.5 ns

Maximum Record Length (all channels) 1 M points

Maximum Duration of Time Captured at Highest Sample Rate (all channels) 1 ms

Timebase Range 4 ns to 100 s 2 ns to 100 s

Timebase Delay Time Range -10 div to 5000 s

Channel-to-Channel Deskew Range ±100 ns

Timebase Accuracy ±25 ppm

Horizontal System - Digital Channels

MSO2012 MSO2014 MSO2024

Maximum Sample Rate (when using any of channels D7-D0) 1 GS/s (1 ns resolution)

Maximum Sample Rate (when using any of channels D15-D8) 500 MS/s (2 ns resolution)

Maximum Record Length 1 M points

Minimum Detectable Pulse Width 5 ns

Channel-to-Channel Skew 2 ns typical

Characteristics

Vertical System - Analog Channels

Vertical System Analog Channels MSO2012 MSO2014 MSO2024

DPO2012 DPO2014 DPO2024

Input Channels 2 4 4

Analog Bandwidth*1(-3 dB) 100 MHz 100 MHz 200 MHz

Calculated Rise Time 3.5 ns 3.5 ns 2.1 ns

Hardware Bandwidth Limits 20 MHz

Input Coupling AC, DC, GND

Input Impedance 1 MΩ±2%, 11.5 pF ±2 pF

Input Sensitivity Range 2 mV/div to 5 V/div

Vertical Resolution 8 bits

Max Input Voltage 300VRMS with peaks ≤450 V

DC Gain Accuracy (with offset set to 0 V) ±3% for 10 mV/div to 5 V/div, ±4% for 2 mV/div to 5 mV/div

Offset Range

2 mV/div to 200 mV/div ±1 V

>200 mV/div to 5 V/div ±25 V

Channel-to-Channel Isolation(Any Two Channels at Equal Vertical Scale) ≥100:1 at ≤100 MHz 100:1 at ≤200 MHz

*1Bandwidth is 20 MHz at 2 mV/div,all models

Vertical System - Digital Channels

MSO2012 MSO2014 MSO2024

Input Channels 16 Digital (D15 to D0)

Thresholds Threshold per set of 8 channels

Threshold Selections TTL, CMOS, ECL, PECL, User Defined

User Defined Threshold Range ±20 V

Maximum Input Voltage ±40 V

Threshold Accuracy ±(100 mV + 3% of threshold setting)

Maximum Input Dynamic Range 80 Vpk-pk (threshold setting dependent)

Minimum Voltage Swing 500 mVpk-pk

Input Impedance 101 kΩ

Probe Loading 8 pF

Vertical Resolution 1 bit

Digital Phosphor Oscilloscopes • www.tektronix.com/mso2000 • www.tektronix.com/dpo2000 9

Digital Phospor Oscilloscopes

MSO2000 Series • DPO2000 Series

Acquisition Modes

Sample – Acquires sampled values.

Peak Detect – Captures glitches as narrow as

3.5 ns at all sweep speeds.

Averaging – From 2 to 512 waveforms included

in average.

Roll – Scrolls waveforms right to left across screen

at sweep speeds slower than or equal to 40 ms/div.

Trigger System

Main Trigger Modes – Auto, Normal and Single.

Trigger Coupling – DC, HF reject (attenuates

>85 kHz), LF reject (attenuates <65 kHz),noise

reject (reduces sensitivity).

Trigger Holdoff Range – 20 ns to 8 s.

Trigger Signal Frequency Counter – Provides a

higher accuracy means of identifying the frequency

of trigger signals.Trigger Signal Frequency counter

resolution is 6 digits.

Trigger Level Range

Any Channel – ±4.92 divisions from center

of screen.

External (auxiliary input) – ±6.25V,1x attenuation;

±12.5V, 10x attenuation.

Trigger Modes

Edge – Positive or negative slope on any channel or

front-panel auxiliary input. Coupling includes DC, HF

reject, LF reject, and noise reject.

Pulse Width – Trigger on width of positive or negative

pulses that are >, <, =, or ≠to a specified period

of time.

Runt – Trigger on a pulse that crosses one

threshold but fails to cross a second threshold

before crossing the first again.

Logic – Trigger when any logical pattern of channels

goes false or stays true for specified period of time.

Any input can be used as a clock to look for the pattern

on a clock edge. Pattern (AND, NAND) specified for

all analog and digital input channels defined as High,

Low, or Don’t Care.

Setup and Hold – Trigger on violations of both

setup time and hold time between clock and data

present on any of the input channels.

Rise/Fall Time – Trigger on pulse edge rates that

are faster or slower than specified. Slope may be

positive, negative, or either.

Video – Trigger on line number, all lines, odd, even,

or all fields on NTSC,PAL and SECAM video signals.

I2C (Optional) – Trigger on Start, Repeated Start,

Stop, Missing ACK,Address (7 or 10 bit),Data, or

Address and Data on I2C buses up to 3.4 Mb/s.

SPI (Optional) – Trigger on SS, Idle Time, MOSI,

MISO, or MOSI and MISO on SPI buses up to

10.0 Mb/s.

CAN (Optional) – Trigger on Start of Frame, Frame

Type (data, remote, error,overload), Identifier (stan-

dard or extended), Data, Identifier and Data, End of

Frame, Missing ACK,or Bit Stuffing Errors on CAN

signals up to 1 Mb/s. Data can be further specified

to trigger on ≤,<,=,>,≥or ≠a specific data value.

User-adjustable sample point is set to 50% by default.

RS-232/422/485/UART (Optional) – Trigger on

Tx start bit, Rx start bit,Tx end of packet,Rx end

of packet,Tx data, Rx data,Tx Parity Error, and Rx

Parity Error.

LIN (Optional) – Trigger on Sync, Identifier, Data,

Identifier and Data,Wakeup Frame, Sleep Frame,

or Errors such as Sync Parity or Checksum Errors.

Parallel (available on MSO models only) – Trigger

on a parallel bus data value.

Waveform Measurements

Cursors – Waveform and Screen

Automatic Measurements – 29, of which up to

four can be displayed on screen at any one time.

Measurements include Frequency, Period, Delay,

Rise Time,Fall Time,Positive Duty Cycle,Negative

Duty Cycle, Positive Pulse Width, Negative Pulse

Width, Burst Width, Phase, Positive Overshoot,

Negative Overshoot, Peak-to-Peak,Amplitude,High,

Low, Max, Min, Mean, Cycle Mean, RMS, Cycle

RMS, Positive Pulse Count, Negative Pulse Count,

Rising Edge Count, Falling Edge Count,Area and

Cycle Area.

Gating – Isolate the specific occurrence within an

acquisition to take measurements, using either the

screen or waveform cursors.

Waveform Math

Arithmetic – Add,subtract, and multiply waveforms.

Software

NI LabVIEW SignalExpressTM Tektronix Edition LE –

A fully interactive measurement software environ-

ment optimized for the MSO2000/DPO2000 Series,

enables you to instantly acquire, generate, analyze,

compare, import, and save measurement data and

signals using an intuitive drag-and-drop user inter-

face that does not require any programming.Standard

MSO2000/DPO2000 Series support for acquiring,

controlling, viewing and exporting your live signal

data is permanently available through the software.

The full version (SIGEXPTE) adds additional signal

processing, advanced analysis, mixed signal,

sweeping, limit testing, and user-defined step capa-

bilities and is available for a 30-day trial period stan-

dard with each instrument.

OpenChoice®Desktop – Enables fast and easy

communication between a Windows PC and the

MSO2000/DPO2000 Series, using USB or LAN.

Transfer and save settings, waveforms, measure-

ments and screen images.

IVI Driver – Provides a standard instrument

programming interface for common applications

such as LabVIEW, LabWindows/CVI, Microsoft

.NET and MATLAB.

Sensitivity

Internal DC Coupled

Trigger Source Sensitivity

Analog Inputs 0.4 division from DC to 50 MHz

0.6 divisions >50 MHz to 100 MHz

0.8 divisions >100 MHz to 200 MHz

External

(Auxiliary Input) 200 mV from DC to 100 MHz,

1x attenuation

Display Characteristics

Display Type – 7 in (180 mm) liquid crystal TFT

color display.

Display Resolution – 480 horizontal x 234 vertical

pixels (WQVGA).

Waveform Styles – Vectors,Dots (In Video Trigger

mode),Variable Persistence, Infinite Persistence.

Graticules – Full,Grid, Cross Hair, Frame.

Format – YT and XY.

Waveform Capture Rate – Up to 5,000 wfms/sec.

Input/Output Ports

USB 2.0 High-Speed Host Port – Supports USB

data storage devices and keyboards.

USB 2.0 High-Speed Device Port – Rear-panel

port supports communication/control of oscilloscope

by PC and all PictBridge®compatible printers.

LAN Port – RJ-45 connector, supports 10/100Base-T

(requires DPO2CONN).

GPIB – Adapt USB 2.0 device port to a GPIB port

(requires TEK-USB-488).

Video Out Port – DB-15 female connector,connect

to show the oscilloscope display on an external

monitor or projector (requires DPO2CONN).

Auxiliary Input – Front-panel BNC connector. Input

Impedance 1 MΩ±2%. Max input 300 VRMS with

peaks ±450 V.

Probe Compensator Output – Front-panel pins,

Amplitude 5.0 V, Frequency 1 kHz.

Kensington Lock – Rear-panel security slot

connects to standard Kensington style lock.

Power Source

Power Source Voltage – 100 to 240V ±10%.

Power Source Frequency – 45 to 65 Hz

(90 to 264 V), 360 to 440 Hz (100 to 132 V).

Power Consumption – 80 W maximum.

TekVPI External Power Supply (119-7465-xx) –

Output voltage: 12 V; Output current:4.2 A; Power

consumption: 50 W.

General Characteristics

Environmental

Temperature

Operating – 0 ºC to +50 ºC.

Nonoperating – -40 ºC to +71 ºC.

Humidity

Operating – High:30 ºC to 50 ºC, 5% to 60%

Relative Humidity. Low: 0 ºC to 30 ºC, 5% to 95%

Relative Humidity.

Nonoperating – High:30 ºC to 55 ºC, 5% to 60%

Relative Humidity. Low: 0 ºC to 30 ºC, 5% to 95%

Relative Humidity.

Altitude

Operating – 3,000 meters (9,843 feet).

Nonoperating – 12,000 meters (39,370 feet).

Random Vibration

Operating – 0.31 GRMS from 5 to 500 Hz,

10 minutes each axis, 3 axes,30 minutes total.

Nonoperating – 2.46 GRMS from 5 to 500 Hz,

10 minutes each axis, 3 axes,30 minutes total.

Regulatory

Electromagnetic Compatibility – 2004/108/EC.

Safety – Listed UL61010-1: 2004, CAN/CSA-C22.2

No. 61010.1: 2004; Complies with EN61010-1:

2001, Complies with the Low Voltage Directive

2004/108/EC for Product Safety.

MSO2000 Models

MSO2012– 100 MHz, 1 GS/s, 1 M record length,

2+16 channel mixed signal oscilloscope.

MSO2014– 100 MHz, 1 GS/s, 1 M record length,

4+16 channel mixed signal oscilloscope.

MSO2024– 200 MHz, 1 GS/s, 1 M record length,

4+16 channel mixed signal oscilloscope.

DPO2000 Models

DPO2012– 100 MHz, 1 GS/s, 1 M record length,

2-channel digital phosphor oscilloscope.

DPO2014– 100 MHz, 1 GS/s, 1 M record length,

4-channel digital phosphor oscilloscope.

DPO2024– 200 MHz, 1 GS/s, 1 M record length,

4-channel digital phosphor oscilloscope.

All models include:One P2221 200 MHz, 1x/10x

Passive Probe per Analog Channel, User Manual

and Translated Front-Panel Overlay, Documentation

CD (063-4118-xx), OpenChoice®Desktop Software,

NI LabVIEW SignalExpressTM Tektronix Edition LE

Software, Calibration certificates document meas-

urement traceability to National Metrology Institute(s)

and ISO9001Quality System Registration, Power

Cord, and a three-year warranty.MSO models also

include one P6316 16-channel logic probe and

accessory kit, and accessor y bag (016-2008-xx).

Please specify power plug and manual version

when ordering.

Digital Phospor Oscilloscopes

MSO2000 Series • DPO2000 Series

Digital Phosphor Oscilloscopes • www.tektronix.com/mso2000 • www.tektronix.com/dpo2000

Physical Characteristics

Dimensions mm in

Height 180 7.1

Width 377 14.9

Depth 134 5.3

Weight kg lb

Net 3.6 7.9

Shipping 6.2 13.7

Rackmount Configuration - 4 U

Cooling Clearance - 50 mm (2 inches) on the left

side and rear (when looking at the front of the

instrument).

Recommended Serial Bus

Application Modules

DPO2EMBD– Embedded Serial Triggering and

Analysis Module. Enables triggering on packet level

information on I2C and SPI buses as well as analyt-

ical tools such as bus views, packet decoding,

search tools, and packet decode tables with time-

stamp information.

DPO2COMP– Computer Serial Triggering and

Analysis Module.Enables triggering on packet level

information on RS-232/422/485/UART buses as

well as analytical tools such as bus views, packet

decoding, search tools, and packet decode tables

with timestamp information.

DPO2AUTO– Automotive Serial Triggering and

Analysis Module. Enables triggering on packet

level information on CAN and LIN buses as well

as analytical tools such as bus views, packet

decoding, search tools, and packet decode tables

with timestamp information.

Options

International Power Plugs

Opt. A0– North America power.

Opt. A1– Universal EURO power.

Opt. A2– United Kingdom power.

Opt. A3– Australia power.

Opt. A5– Switzerland power.

Opt. A6– Japan power.

Opt. A10– China power.

Opt. A11– India power.

Opt. A99– No power cord or AC adapter.

Language Options*1

Opt. L0– English manual.

Opt. L1– French manual.

Opt. L2– Italian manual.

Opt. L3– German manual.

Opt. L4– Spanish manual.

Opt. L5– Japanese manual.

Opt. L6– Portuguese manual.

Opt. L7– Simplified Chinese manual.

Opt. L8– Standard Chinese manual.

Opt. L9– Korean manual.

Opt. L10– Russian manual.

Opt. L99– No manual.

Service Options*2

Opt. C3– Calibration Ser vice 3 years.

Opt. C5– Calibration Ser vice 5 years.

Opt. CA1– Provides a single calibration event,

or coverage for the designated calibration interval,

whichever comes first.

Opt. D1– Calibration Data Report.

Opt. D3– Calibration Data Report 3 years

(with Opt. C3).

Opt. D5– Calibration Data Report 5 Years

(with Opt. C5).

Opt. R5– Repair Ser vice 5 years

(including warranty).

Recommended Probes

TAP1500*3–1.5 GHz TekVPI™ single-ended

active probe.

TDP0500*3,*5–500 MHz T ekVPI™ 42 V

differential probe.

TCP0030*3–120 MHz TekVPI™ 30 Ampere

AC/DC current probe.

TCP0150*3–20 MHz TekVPI™ 150 Ampere

AC/DC current probe.

TCPA300/400*6–Current measurement

system amplifiers.

TCP305– DC to 50 MHz, 50 A current probe

for use with TCPA300.

TCP404XL– DC to 2 MHz, 500 A current probe

for use with TCPA400.

P5100– 2.5 kV,100X high-voltage passive probe.

P5200– 1.3 kV,50X/500X, 25 MHz high-voltage

active differential probe.

P5205*3,*4–1.3 kV, 100 MHz high-voltage

differential probe.

P5210*3,*4–5.6 kV, 50 MHz high-voltage

differential probe.

ADA400A*3,*4–100x, 10x, 1x, 0.1x high-gain

differential amplifier.

Recommended Accessories

DPO2CONN – Adds Ethernet (10/100Base-T) and

Video Out Port.

Service manual – Order 071-2331-xx (English only).

TPA-BNC*3 –TekVPI to TekProbe BNC Adapter.

TekVPI External Power Supply – Order 119-7465-xx.

TEK-USB-488 – GPIB to USB Adapter.

Digital Probe Leadset (8 Channels) – Order 196-

3508-xx.

TEK-DPG*3 –TekVPI Deskew Pulse Generator

Signal Source.

Deskew and Calibration Fixture – Order 067-

1686-xx.

Rackmount Kit – Order RMD2000. Does not

include slide-out rails.

Soft Transit Case and Front Protective Cover

–Order ACD2000.

Front Protective Cover – Order 200-5045-xx.

Hard Transit Case – Order HCTEK4321 (Requires

ACD2000).

SIGEXPTE – NI LabVIEW SignalExpressTM Tektronix

Edition Software (Full Version).

USB Keyboard – Order 119-7083-00.

Warranty

Three-year warranty covering all parts and labor,

excluding probes.

*1Language options include translated front-panel overlay

for the selected language(s).

*2Probes and accessories are not covered by the oscilloscope

warranty and Service Offerings.

Refer to the datasheet of each probe and accessory model

for its unique warranty and calibration terms.

*3Requires TekVPI external power adapter (119-7465-00);

one per oscilloscope.

*4Requires TPA-BNC adapter.

*5Probes terminate into 50 Ωbut oscilloscope will automatically

adjust to account for 1 MΩinput.

*6Requires 50 Ωfeed through termination between the

oscilloscope input and the BNC cable.

Digital Phosphor Oscilloscopes • www.tektronix.com/mso2000 • www.tektronix.com/dpo2000 11

Digital Phospor Oscilloscopes

MSO2000 Series • DPO2000 Series

Soft carrying case with front protective cover for

MSO2000 and DPO2000 Series (ACD2000).

Digital Phospor Oscilloscopes

MSO2000 Series • DPO2000 Series

For Further Information

Tektronix maintains a comprehensive, constantly expanding collection of

application notes, technical briefs and other resources to help engineers

working on the cutting edge of technology. Please visit www.tektronix.com

covered by U.S. and foreign patents, issued and pending. Information

in this publication supersedes that in all previously published material.

Specification and price change privileges reserved. TEKTRONIX and

TEK are registered trademarks of Tektronix, Inc. All other trade names

referenced are the service marks, trademarks or registered trademarks

of their respective companies.

10/08 WOW 3GW-22048-0

Contact Tektronix:

ASEAN / Australasia (65) 6356 3900

Austria +41 52 675 3777

Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777

Belgium 07 81 60166

Brazil & South America (11) 40669400

Canada 1 (800) 661-5625

Central East Europe, Ukraine and the Baltics +41 52 675 3777

Central Europe & Greece +41 52 675 3777

Denmark +45 80 88 1401

Finland +41 52 675 3777

France +33 (0) 1 69 86 81 81

Germany +49 (221) 94 77 400

Hong Kong (852) 2585-6688

India (91) 80-22275577

Italy +39 (02) 25086 1

Japan 81 (3) 6714-3010

Luxembourg +44 (0) 1344 392400

Mexico, Central America & Caribbean 52 (55) 5424700

Middle East, Asia and North Africa +41 52 675 3777

The Netherlands 090 02 021797

Norway 800 16098

People’s Republic of China 86 (10) 6235 1230

Poland +41 52 675 3777

Portugal 80 08 12370

Republic of Korea 82 (2) 6917-5000

Russia & CIS +7 (495) 7484900

South Africa +27 11 206 8360

Spain (+34) 901 988 054

Sweden 020 08 80371

Switzerland +41 52 675 3777

Taiwan 886 (2) 2722-9622

United Kingdom & Eire +44 (0) 1344 392400

USA 1 (800) 426-2200

For other areas contact Tektronix, Inc. at: 1 (503) 627-7111

Updated 12 November 2007

Product(s) are manufactured in ISO registered facilities.

Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with

Tektronix Standard Codes and Formats.