DO-35
MIN MAX MIN MAX
A----- 0.166 ----- 4.20
B----- 0.079 ----- 2.00
C----- 0.020 ----- 0.52
D1.000 ----- 25.40 -----
DIMENSIONS
DIM INCHES MM NOTE
Features
Maximum Ratings
l Operating Temperature: -55oC to +150oC
l Storage Temperature: -55oC to +200oC
Electrical Characteristics @ 25oC Unless Otherwise Specified
*Pulse test: Pulse width 300 sec, Duty cycle 2%
1N4151
1N4154
500mW Silicon
Switching Diode
Reverse Voltage
1N4151
1N4154 VR50V
25V
Peak Reverse
Voltage
1N4151
1N4154
VRM 75V
35V
Average
Rectifierd Current Io 150mA
Resistive Load
f>=50Hz
Power Dissipation PTOT
500mW
Junction
Temperature TJ200oC
Peak Forward
Surge Current
1N4151
1N4154
IFSM 50mA
30mA 8.3ms,half sine
Maximum
Instantaneous
Forward Voltage
VF1.0V IF=30mA
TJ=25oC*
Maximum DC
Reverse Current
At Rated DC
Blocking Voltage
1N4151
1N4154
IR0.05uA
0.1uA
TA=25oC
VR1=50V
V
R2
=25V
Typical Junction
Capacitance
1N4151
1N4154
CJ2.0pF
4.0pF
Measured at
1.0MHz,VR=4.0V
Maximum
Reverse
Recovery Time Trr 2.0nS IF=10mA
VR=6V
RL=100ohm
A
B
C
D
D
Cathode
Mark
omponents
21201 Itasca Street Chatsworth
!"#
$% !"#
MCC TM
Micro Commercial Components
www.mccsemi .com
Revision: C 2013/02/18
1 of 4
• Metallurgically bonded Construction
• Moisture Sensitivity Level 1
• Planar Passivated
• Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Note: 1. Lead in Glass Exemption Applied, see EU Directive Annex 7(C)-I.
1N4151 thru 1N4154
Admissable Power Dissipation - MilliWatts versus
Ambient Temperature - °C
Figure 2
Forward Derating Curve
017550 75 100 125
0
100
200
300
Single Phase, Half Wave
60Hz Resistive or Inductive Load
MilliWatts
°C
150
400
500
600
Junction Capacitance - pF versus
Reverse Voltage - Volts
Figure 3
Junction Capacitance
.1 .2 1.4 2 10 20 404 100 200
.1
.2
.6
1
2
10
pF
Volts
6
4
.4
400 1000
TJ=25°C
www.mccsemi .com
MCC TM
Micro Commercial Components
Revision: C 2013/02/18
2 of 4
Instantaneous Forward Current - MilliAmperes versus
Instantaneous Forward Voltage - Volts
Figure 1
Typical Forward Characteristics
MilliAmps
Volts
1N4151 thru 1N4154
1 100
4
0
100
200
300
8
Figure 5
Peak Forward Surge Current
Peak Forward Surge Current - Amperes versus
Number Of Cycles At 60Hz - Cycles
MilliAmps
Cycles
2
6
10 20 60 80
40
400
500
600
Figure 4
Typical Reverse Characteristics
Instantaneous Reverse Leakage Current - NanoAmperes versus
Junction Temperature - °C
TJ
40
60
200
100
NanoAmps
20 120
40 60 80 100
.1
.2
.4
.6
1
2
4
6
10
20
400
600
1000
140
TA=25°C
www.mccsemi.com
MCC TM
Micro Commercial Components
Revision: C 2013/02/18
3 of 4
MCC
www.mccsemi .com
Revision: C 2013/02/18
TM
Micro Commercial Components
www.mccsemi.com
4 of 4
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Device Packing
Part Number-TP Tape&Reel: 10Kpcs/Reel
Part Number-AP Ammo Packing: 5Kpcs/AmmoBox
Part Number-BP Bulk: 100Kpcs/Carton
Ordering Information :
