ARC1 Planar (Flat) Leaded Resistor This versatile Non Inductive quality range of high voltage thick film resistors, available in conformal or glass coatings, has been designed into a wide range of applications including high voltage medical test equipment, HV power supplies and various high spec instrumentation. * Variety of configurations * High voltage capability * RoHS Compliant * Low TCR * Tolerance as low as 0.1% * Non inductive * Both axial and radial leaded Electrical Specifications Electrical data Resistance range available at Tolerance / TCR Type P Watt U kVdc 0.1 - 10% 15 ppm/C 0.1 - 10% 25 ppm/C 0.25 - 10% 50 ppm/C 0.5 - 10% 100 ppm/C 1 - 10% 200 ppm/C 5 - 10% 200 ppm/C ARC1-325 1 8 50K - 25M 10K - 50M 4K - 200M 4K - 1G 4K - 1G 4K - 4G ARC1-338 1.5 10 100K - 30M 20K - 60M 8K - 250M 8K - 1G 8K - 1G 8K - 4G ARC1-513 1 5 50K - 50M 10K - 100M 1K - 150M 200R - 250M 100R - 1G 50R - 10G ARC1-551 2 20 100K - 200M 30K - 250M 4K - 400M 1K - 1G 300R - 1G 200R - 25G ARC1-1025 2 10 100K - 200M 25K - 300M 4K - 300M 1K - 1G 400R - 1G 200R - 30G ARC1-1051 3 30 300K - 300M 50K - 300M 8K - 500M 3K - 1G 800R - 1G 400R - 30G ARC1-1538 3 15 300K - 300M 60K - 300M 9K - 500M 3K - 1G 800R - 1G 500R - 30G ARC1-1551 4.5 30 400K - 300M 75K - 300M 12K - 500M 4K - 1G 1K - 1G 600R - 30G ARC1-1576 5.5 35 600K - 300M 120K - 300M 18K - 500M 6K - 1G 1K - 1G 1K - 30G ARC1-2599 10 35 2M - 300M 200K - 300M 30K - 500M 12K - 1G 3K - 1G 3K - 30G Characteristics Operating temperature: -55C to +175C Tolerance (Code): 0.1% (B), 0.25% (C), 0.5% (D), 1% (F), 2% (G), 5% (J), 10% (K) Temperature coefficient (Code): 15ppm/C (A), 25ppm/C (E), 50ppm/C (F), 100ppm/C (S), 200ppm/C (L) TCR stated is measured at +25C and +85C. For TCR outside this range, please contact ARCOL Insulation resistance: > 10,000Mohm 500 Volts @ 25C, 75% relative humidity Dielectric strength: > 1000 Volt 25C, 75% relative humidity Thermal shock: R/R 0.2% max Overload: R/R 0.25% max Moisture resistance: R/R 0.25% max 1.5 x Pnom, 5 sec (do not exceed 1.5 x V max) Load life: R/R 0.25% max 1000 hours at rated power These resistors are tailored for operation in air and not aggresive atmospheres. For special applications (i.e. oil, casting, moulding, etc) please contact ARCOL. ARCOL UK Limited, The information contained herein does not form part of Threemilestone Ind. Estate, a contract and is subject to change without notice. Arcol Truro, Cornwall, TR4 9LG, UK. operate a policy of continual product development, therefore, T +44 (0) 1872 277431 specifications may change. F +44 (0) 1872 222002 E sales@arcolresistors.com www.arcolresistors.com It is the responsibility of the customer to ensure that the component selected from our range is suitable for the intended application. If in doubt please ask Arcol. Page 1 of 2 5/11-38 ARC1 Planar (Flat) Leaded Resistor Ordering Procedure Derating Curve 100 Style, Coating Type, Ohmic Value, Tolerance Code and Temperature Coefficient Code, e.g.: ARC1-551 AU 1G D E Termination Style (Code) Axial (A), Radial (R) Coating Type (Code) Conformal (U), Glass (G) Tolerance (Code) 0.1% (B), 0.25% (C), 0.5% (D), 1% (F), 2% (G), 5% (J), 10% (K) Temperature Coefficient (Code) 15ppm/C (A), 25ppm/C (E), Percent Rated Power Standard Resistor To specify standard: Series, Termination 80 60 40 20 p 0 50ppm/C (F), 100ppm/C (S), 200ppm/C (L) 0 40 100 Temperature C C Tem erature 175 Dimensions (mm) 363* L 2.5 AXIAL = A Dimensions L O0.8* RADIAL = R *ARC1-513 *967.5.13 Pins: L = 91 L B B 305* O = 0.6 x 0.3 Type 2.5 O0.8* R R ARC1-325 25.4 3.8 22.9 ARC1-338 38.0 3.8 35.7 ARC1-513 12.7 5.0 10.2 ARC1-551 50.8 5.0 48.3 ARC1-1025 25.4 10.0 22.9 ARC1-1051 50.8 10.0 48.3 ARC1-1538 38.0 15.0 35.7 ARC1-1551 50.8 15.0 48.3 ARC1-1576 76.2 15.0 73.4 ARC1-2599 101.6 24.0 98.6 ARCOL UK Limited, The information contained herein does not form part of Threemilestone Ind. Estate, a contract and is subject to change without notice. Arcol Truro, Cornwall, TR4 9LG, UK. operate a policy of continual product development, therefore, T +44 (0) 1872 277431 specifications may change. F +44 (0) 1872 222002 E sales@arcolresistors.com www.arcolresistors.com It is the responsibility of the customer to ensure that the component selected from our range is suitable for the intended application. If in doubt please ask Arcol. Page 2 of 2 5/11.38 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Arcol: ARC1.10.51 RG 250M F ARC1-325 RU 10M C A