Order this document by MBRS2040LT3/D SEMICONDUCTOR TECHNICAL DATA SMB Power Surface Mount Package SCHOTTKY BARRIER RECTIFIER 2.0 AMPERES 40 VOLTS . . . employing the Schottky Barrier principle in a metal-to-silicon power rectifier. Features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency switching power supplies; free wheeling diodes and polarity protection diodes. * * * * Compact Package with J-Bend Leads Ideal for Automated Handling Highly Stable Oxide Passivated Junction Guardring for Over-Voltage Protection Low Forward Voltage Drop Mechanical Characteristics: * Case: Molded Epoxy * Epoxy Meets UL94, VO at 1/8 * Weight: 95 mg (approximately) * Maximum Temperature of 260C / 10 Seconds for Soldering * Polarity: Notch in Plastic Body Indicates Cathode Lead * Available in 12 mm Tape, 2500 Units per 13 inch Reel, Add "T3" Suffix to Part Number * Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable * Marking: BKJL CASE 403A-03 SMB MAXIMUM RATINGS Rating Symbol Value Unit VRRM VRWM VR 40 V IO 2.0 A Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz, TC = 104C) IFRM 4.0 A Non-Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) IFSM 70 A Tstg, TC -55 to 150 C TJ -55 to 125 C dv/dt 10,000 V/ms Rtjl Rtja 22.5 78 C/W Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TC = 103C) Storage / Operating Case Temperature Operating Junction Temperature Voltage Rate of Change (Rated VR, TJ = 25C) THERMAL CHARACTERISTICS Thermal Resistance - Junction-to-Lead (2) Thermal Resistance - Junction-to-Ambient (3) ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (1), See Figure 2 VF (IF = 2 A) (IF = 4 A) Maximum Instantaneous Reverse Current, See Figure 4 (VR = 40 V) (VR = 20 V) IR TJ = 25C TJ = 125C 0.43 0.50 0.34 0.45 TJ = 25C TJ = 100C 0.80 0.10 20 6.0 V mA (1) Pulse Test: Pulse Width 250 s, Duty Cycle 2.0%. (2) Minimum pad size (0.108 X 0.085 inch) for each lead on FR4 board. (3) 1 inch square pad size (1 X 0.5 inch for each lead) on FR4 board. This document contains information on a new product. Specifications and information herein are subject to change without notice. Device Rectifier Motorola, Inc. 1996 Data 1 100 100 10 TJ = 100C 1.0 TJ = 25C TJ = 125C TJ = -40C 0.1 0 0.2 0.4 0.6 0.8 TJ = 25C TJ = 100C 0.1 0 0.2 0.4 0.6 0.8 Figure 2. Maximum Forward Voltage 100E-3 I R, MAXIMUM REVERSE CURRENT (AMPS) I R, REVERSE CURRENT (AMPS) TJ = 125C 1.0 Figure 1. Typical Forward Voltage 10E-3 TJ = 125C TJ = 100C 1.0E-3 TJ = 125C 10E-3 TJ = 100C 1.0E-3 100E-6 TJ = 25C 10E-6 1.0E-6 0 10 20 0 10 20 30 40 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 3. Typical Reverse Current Figure 4. Maximum Reverse Current dc 3.0 2.5 SQUARE WAVE 2.0 Ipk/Io = p 1.5 Ipk/Io = 5 1.0 Ipk/Io = 10 0.5 Ipk/Io = 20 0 20 1.0E-6 40 30 TJ = 25C 10E-6 PFO , AVERAGE POWER DISSIPATION (WATTS) 3.5 I O , AVERAGE FORWARD CURRENT (AMPS) 10 VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 100E-6 2 100 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 100E-3 0 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) IF, INSTANTANEOUS FORWARD CURRENT (AMPS) MBRS2040LT3 40 60 80 100 120 140 1.2 SQUARE WAVE 1.0 Ipk/Io = p dc 0.8 Ipk/Io = 5 0.6 Ipk/Io = 10 0.4 Ipk/Io = 20 0.2 0 0 0.5 1.0 1.5 2.0 2.5 TL, LEAD TEMPERATURE (C) IO, AVERAGE FORWARD CURRENT (AMPS) Figure 5. Current Derating Figure 6. Forward Power Dissipation 3.0 Rectifier Device Data MBRS2040LT3 TJ , DERATED OPERATING TEMPERATURE ( C) C, CAPACITANCE (pF) 1000 TJ = 25C 100 10 R (T) , TRANSIENT THERMAL RESISTANCE (NORMALIZED) 0 5.0 10 15 20 25 30 35 125 Rtja = 22.5C/W 115 105 40 95 42C/W 61C/W 85 78C/W 75 92C/W 65 0 5.0 10 15 20 25 30 35 40 VR, REVERSE VOLTAGE (VOLTS) VR, DC REVERSE VOLTAGE (VOLTS) Figure 7. Capacitance Figure 8. Typical Operating Temperature Derating* * Reverse power dissipation and the possibility of thermal runaway must be considered when operating this device under any reverse voltage conditions. Calculations of TJ therefore must include forward and reverse power effects. The allowable operating TJ may be calculated from the equation: TJ = TJmax - r(t)(Pf + Pr) where r(t) = thermal impedance under given conditions, Pf = forward power dissipation, and Pr = reverse power dissipation This graph displays the derated allowable TJ due to reverse bias under DC conditions only and is calculated as TJ = TJmax - r(t)Pr, where r(t) = Rthja. For other power applications further calculations must be performed. 1.0 50% 20% 10% 0.1 5.0% 2.0% 0.01 1.0% Rtjl(t) = Rtjl*r(t) 0.001 0.00001 0.0001 0.001 0.1 0.01 1.0 10 100 R (T) , TRANSIENT THERMAL RESISTANCE (NORMALIZED) T, TIME (s) Figure 9. Thermal Response Junction to Lead 1.0 50% 20% 0.1 10% 5.0% 2.0% 0.01 1.0% Rtjl(t) = Rtjl*r(t) 0.001 0.00001 0.0001 0.001 0.01 0.1 1.0 10 100 1,000 T, TIME (s) Figure 10. Thermal Response Junction to Ambient Rectifier Device Data 3 MBRS2040LT3 0.089 2.261 0.108 2.743 0.085 2.159 inches mm SMB PACKAGE DIMENSIONS S A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. D B C K J P INCHES DIM MIN MAX A 0.160 0.180 B 0.130 0.150 C 0.075 0.095 D 0.077 0.083 H 0.0020 0.0060 J 0.006 0.012 K 0.030 0.050 P 0.020 REF S 0.205 0.220 MILLIMETERS MIN MAX 4.06 4.57 3.30 3.81 1.90 2.41 1.96 2.11 0.051 0.152 0.15 0.30 0.76 1.27 0.51 REF 5.21 5.59 H CASE 403A-03 ISSUE B Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303-675-2140 or 1-800-441-2447 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 81-3-3521-8315 Mfax: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 4 MBRS2040LT3/D Rectifier Device Data