298
Aluminium enclosures
CA series
BERNSTEIN aluminium enclosures are
ideally suited to housing electrical,
electronic or pneumatic components.
Their high mechanical strength ensures
excellent protection against impact and all
sizes are sealed to IP 65, according to
IEC 529.
BERNSTEIN aluminium enclosures are fitted
with copper earthing screws (M4 or M6) in
both the base and lid, the surface below
the screws is unpainted allowing a good
earth connection to be made. The captive
lid screws are made of stainless steel and
are held in place by a lock integrated in the
lid. A gasket (for standard enclosures) is
factory-fitted, and ensures conformance
with the protection class. BERNSTEIN
aluminium enclosures are surface-coated in
RAL 7001 (silver-grey), as standard.
BERNSTEIN aluminium enclosures are either
die-cast or chill-cast. The dimension table
shows the production method used for
each respective enclosure.
Attachment points inside the enclosure can
be used to hold equipment in place
(mounting rail, mounting plate, printed
circuit board etc.). Alternatively, the
earthing points may be used. These inner
attachment points are situated at different
heights and positions. (Refer to the
illustrations for detailed positions.)
Technical data
Material
Die-cast aluminium or AlSi 12 (Cu) chill-
cast
Gasket
Neoprene round seal (siliconised)
alternative:
Neoprene round seal
(silicone-free)
Silicone round seal
Lid screws
Stainless steel, captive, multi-purpose cross
head
alternative:
– Stainless steel quarter turn quick release
(die-cast types only)
– Stainless steel hexagonal
socket head screws
– Lead-sealed steel lid screws
(9 S 20 K), slotted head
Coating
RAL 7001 (silver-grey)
alternative:
– Special RAL colours
– Special coatings
Temperature range
-40 °C to +80 °C (neoprene gasket)
alternative:
-50 °C to +130 °C (silicone gasket)
or -30 °C to +100 °C
(explosion-hazardous area)
Protection class
IP 65
alternative:
higher protection class by request
Approval
German Lloyd: No. 91 187 - 84HH
UL: File E 168772 (N)
Enclosures
299
Aluminium enclosures – product line
Dimensions/mm Aluminium enclosures Cast type
dc = die casting
Lx Wx H Part number Type cc = chilled casting
50 x 45 x 30 102.0.0000.00 CA-020 dc
58 x 64 x 36 106.0.0000.00 CA-060 dc
98 x 64 x 36 108.0.0000.00 CA-080 dc
150 x 64 x 36 110.0.0000.00 CA-100 dc
75 x 80 x 57 113.0.0000.00 CA-130 dc
75 x 80 x 57 114.0.0000.00 CA-140 dc
125 x 80 x 57 115.0.0000.00 CA-150 dc
125 x 80 x 57 116.0.0000.00 CA-160 dc
175 x 80 x 57 117.0.0000.00 CA-170 dc
175 x 80 x 57 118.0.0000.00 CA-180 dc
250 x 80 x 57 119.0.0000.00 CA-190 dc
122 x 122 x 80 121.0.0000.00 CA-210 dc
122 x 122 x 90 121.0.0000.50 CA-215 dc
122 x 122 x 80 122.0.0000.00 CA-220 dc
220 x 122 x 80 123.0.0000.00 CA-230 dc
220 x 122 x 90 123.0.0000.50 CA-235 dc
220 x 122 x 80 124.0.0000.00 CA-240 dc
360 x 122 x 80 125.0.0000.00 CA-250 dc
160 x 160 x 90 127.0.0000.00 CA-270 dc
160 x 160 x 90 128.0.0000.00 CA-280 dc
260 x 160 x 90 129.0.0000.00 CA-290 dc
260 x 160 x 90 130.0.0000.00 CA-300 dc
360 x 160 x 90 131.0.0000.00 CA-310 dc
560 x 160 x 90 133.0.0000.00 CA-330 cc
200 x 230 x 110 135.0.0000.00 CA-350 dc
200 x 230 x 180 136.0.0000.00 CA-360 cc
280 x 230 x 110 137.0.0000.00 CA-370 dc
330 x 230 x 110 138.0.0000.00 CA-380 dc
330 x 230 x 180 139.0.0000.00 CA-390 cc
401 x 230 x 110 140.0.0000.00 CA-400 dc
600 x 230 x 110 142.0.0000.00 CA-420 cc
402 x 310 x 110 145.0.0000.00 CA-450 dc
402 x 310 x 180 146.0.0000.00 CA-460 cc
600 x 310 x 110 147.0.0000.00 CA-470 cc
600 x 310 x 180 148.0.0000.00 CA-480 cc
Accessories for
aluminium enclosures
Mounting plates
Galvanised sheet steel (thickness:
CA-060 to CA-310, CA-350 to CA-400:
1.5 mm; CA-330, CA-420 to CA-480: 2.5 mm) allows
mounting of additional equipment.
Mounting rails
Standard rails TS-15, TS-32 or TS-35 (steel),
yellow-passivated for attachment of terminal blocks.
Earthing rails
Galvanised steel for connecting and
routing of protective earth connection.
External attachment brackets
Stainless steel for mounting enclosures without opening
the lid.
Can be mounted in 90° steps at the base of the
enclosure.
External hinges
For hinged attachment of the enclosure lid. Swivelling
angle of lid approx. 155°. Aluminium casting,
RAL 7001 coating. Machining required to fit.
Drill template is supplied.
Internal hinges
For hinged attachment of the enclosure lid. Swivelling
angle of lid approx. 95°. Made of stainless steel.
Machining required to fit.
Silicone lid gasket
Improved temperature range (-50 °C to +130 °C).
Standard type made of silicone foam.
300
Model
Terminal width (mm):
Single core mm2
Stranded mm2
Nominal voltage V
Loading capacityt A
Terminal bridging
Mounting rail TS 15
TS 32
TS 35
Part number
Type
CA-020
CA-060
CA-080
CA-100
CA-130
CA-140
CA-150
CA-160
CA-170
CA-180
CA-190
CA-210/215/220
CA-230/235/240
CA-250
CA-270/280
CA-290/300
CA-310
CA-330
CA-350
CA-350*)
CA-360
CA-360*)
CA-370
CA-370*)
CA-380
CA-380*)
CA-390
CA-390*)
CA-400
CA-400*)
CA-420
CA-420*)
CA-450
CA-450*)
CA-450**)
CA-460
CA-460*)
CA-460**)
CA-470
CA-470*)
CA-470**)
CA-480
CA-480*)
CA-480**)
Component overview
for aluminium enclosures
CA series
**) Assembled on 2 mounting rails
**) Assembled on 3 mounting rails
The number of terminals is reduced
when partitions are used.
Weidmüller Phoenix Wieland
Block terminal Block terminal Block terminal
4 4 4 2.5 4 4 4 2.5 2.5 2.5 2.5
4 4 4 2.5 4 4 4 2.5 2.5 2.5 2.5
380 380 380 380 500 500 500 500 500 500 500
36 36 36 25 36 36 36 25 25 25 25
–––––––––––
–––––––––––
m––––––––––
m––––––––––
––– 1–––––––
1––– 1––––––
– 1–––1– 11––
–– 1––– 1–– 11
11–– 11– 1–––
11–– 11– 1–––
–11––111–––
–11––111–––
–– 1–––––– 1–
–– 1––– 1–– 1–
–– 2––– 2– 2––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
–––––––––––
Entrelec
Terminal block
5.2 6.2 5.2 6.2 8.2 10.2 12.2
2.5 4 4 4 10 16 25
1.5 4 2.5 4 6 10 16
250 380 750 750 750 750 750
20 35 26 35 46 63 85
–mmmmmm
mm–m–––
––mmmmm
––mmmmm
––– 1–––
4––––––
10––––––
20––––––
64–––––
64–––––
1613–––––
1613–––––
2621–––––
2621–––––
3933–––––
– – 12 10 8 6 5
– – 31 26 19 15 13
– – 58 49 37 29 24
– – 19 16 12 9 8
– – 38 32 24 19 16
– – 57 48 36 29 24
– – 96 80 61 48 40
– – 27 22 17 13 11
– – 54 44 34 26 –
– – 27 22 17 13 11
– – 54 44 34 26 –
– – 42 35 27 21 18
– – 84 70 54 42 –
– – 52 43 33 26 22
– – 104 86 66 52 –
– – 52 43 33 26 22
– – 104 86 66 52 –
– – 66 55 41 33 27
– – 132 110 82 66 –
– – 104 87 65 53 44
– – 208 174 130 106 –
– – 65 55 41 33 28
– – 130 110 82 66 56
– – 195 165 123 99 –
– – 65 55 41 33 28
– – 130 110 82 66 56
– – 195 165 123 99 –
– – 104 87 65 53 44
– – 208 174 130 106 88
– – 312 261 195 159 –
– – 104 87 65 53 44
– – 208 174 130 106 88
– – 312 261 195 159 –
Phoenix
Terminal block
5.2 6.2 7.5 5.2 6.2 8.2 10.2
2.5 410 4 41016
1.5 4 6 2.5 4 6 10
500 500 500 750 750 750 750
27 36 65 36 36 65 87
–m–mmmm
mmm––––
–––mmmm
–––mmmm
––– 1–––
4––––––
12––––––
20––––––
64–––––
644––––
1613–––––
161310––––
2621–––––
262117––––
393327––––
– – – 12 10 8 6
– – – 31 26 19 15
– – – 58 49 37 29
– – – 19 16 12 9
– – – 38 32 24 19
– – – 57 48 36 29
– – – 96 80 61 48
– – – 27 22 17 13
– – – 54 44 34 26
– – – 27 22 17 13
– – – 54 44 34 –
– – – 42 35 27 21
– – – 84 70 54 42
– – – 52 43 33 26
– – – 104 86 66 52
– – – 52 43 33 26
– – – 104 86 66 52
– – – 66 55 41 33
– – – 132 110 82 66
– – – 104 87 65 53
– – – 208 174 130 106
– – – 65 55 41 33
– – – 130 110 82 66
– – – 195 165 123 99
– – – 65 55 41 33
– – – 130 110 82 66
– – – 195 165 123 99
– – – 104 87 65 53
– – – 208 174 130 106
– – – 312 261 195 159
– – – 104 87 65 53
– – – 208 174 130 106
– – – 312 261 195 159
BK 4 9.40.1.0100.00
BK 6 9.40.1.0090.00
BK 12 9.40.1.0130.00
MK 3/4 9.40.1.0010.00
G 5/4 9.40.1.0020.00
G 5/6 9.40.1.0030.00
G 5/12 9.40.1.0040.00
KL-16/8 9.40.1.0050.00
KL-16/12 9.40.1.0060.00
KL-16/16 9.40.1.0070.00
KL-16/20 9.40.1.0080.00
DR 1.5/5 9.40.2.1270.00
DR 4/6 9.40.2.0940.00
MA 2.5/5 9.40.2.1090.00
M 4/6 9.40.2.1030.00
M 6/8 9.40.2.1040.00
M 10/10 9.40.2.1050.00
M 16/12 9.40.2.1060.00
MBK 9.40.2.0010.00
MBK 5/E 9.40.2.0020.00
MBK 10 9.40.2.0030.00
UK 3 N 9.40.2.0050.00
UK 5 N 9.40.2.0070.00
UK 10 9.40.2.0090.00
UK 16 9.40.2.0110.00
301
Enclosures
Siemens
Terminal block Terminal block
Screw terminals Caged tension spring
4 4 10 25 4 4 10
2.5 4 6 16 2.5 4 6
750 750 750 750 750 750 750
26 35 46 85 36 36 65
mmmmmmm
–m–––––
–––––––
mmmmmmm
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
10 10 8 6 12 10 8
27 25 20 16 31 26 20
50 46 37 30 58 49 37
16 15 12 9 19 16 12
32 30 24 19 38 32 24
49 45 37 29 57 48 36
83 76 62 49 96 80 60
22 21 17 13 26 22 17
44 42 34 26 52 44 34
22 20 17 13 26 22 10
44 40 34 26 52 49 32
36 33 27 21 42 35 26
72 66 54 42 84 70 52
44 51 33 26 51 43 32
88 82 66 52 102 86 64
44 40 33 26 51 43 32
88 80 66 52 102 86 64
56 52 42 33 65 54 41
112 104 84 66 130 108 82
89 82 67 53 103 86 65
178 164 134 106 206 172 130
56 52 42 34 65 55 41
112 104 84 68 130 110 82
163 156 126 102 195 165 123
56 52 42 33 65 54 41
112 104 84 66 130 108 82
163 156 126 99 195 162 123
89 82 67 53 103 68 65
178 164 134 106 206 172 130
267 246 201 159 309 258 195
89 82 67 53 103 86 65
178 164 134 106 206 172 130
267 246 201 159 309 258 195
9.40.2.4000.00
9.40.2.4010.00
9.40.2.4020.00
9.40.2.4030.00
9.40.2.4040.00
9.40.2.4050.00
9.40.2.4060.00
264-701 9.40.2.3020.00
264-721 9.40.2.3030.00
264-711 9.40.2.3210.00
264-731 9.40.2.3220.00
279-621 9.40.2.3230.00
280-601 9.40.2.0930.00
280-901 9.40.2.3240.00
281-601 9.40.2.3250.00
281-901 9.40.2.3260.00
282-601 9.40.2.3270.00
284-601 9.40.2.3280.00
283-601 9.40.2.3290.00
AKZ 2.5 PA 9.40.2.0500.00
AKZ 4 PA 9.40.2.0130.00
SAK 2.5 PA 9.40.2.0140.00
SAK 4 PA 9.40.2.0150.00
SAK 6 NPA 9.40.2.0160.00
SAK 10 PA 9.40.2.0470.00
SAK 16 PA 9.40.2.0170.00
WDU 2.5 9.40.2.1460.00
WDU 4 9.40.2.1470.00
WAGO
Terminal block
6.2 10.2 6.2 10.2 4.2 5.2 5.2 6.2 6.2 8.2 10.2 12.2
2.5 2.5 2.5 2.5 1.5 2.5 2.5 4 4 6 10 16
2.5 2.5 2.5 2.5 1.5 2.5 2.5 4 4 6 10 16
800 800 800 800 800 800 800 800 800 800 800 800
26 26 26 26 18 26 26 34 34 44 61 82
mmmmmmmmmmmm
mm––––––––––
––––––––––––
––mmmmmmmmmm
––––––––––––
––––––––––––
––––––––––––
––––––––––––
53––––––––––
53––––––––––
138––––––––––
138––––––––––
2113––––––––––
2113––––––––––
3420––––––––––
––12718–––––––
––281743–––––––
––513143–––––––
– – 10 17 25 20 20 17 17 12 10 8
– – 33 20 50 40 40 33 33 25 20 16
– – 50 30 76 60 60 50 50 37 30 28
– – 83 50 125 100 100 83 83 62 50 41
– – 23 14 35 28 28 23 23 17 14 11
– – 46 28 70 56 56 46 46 34 28 –
– – 23 14 35 28 28 23 23 17 14 11
– – 46 28 70 56 56 46 46 34 28 –
– – 36 22 55 44 44 37 37 27 22 18
– – 72 44 110 88 88 74 74 54 44 –
– – 45 27 68 54 54 45 45 33 27 22
– – 90 54 136 108 108 90 90 66 54 –
– – 45 27 68 54 54 45 45 33 27 22
– – 90 54 136 108 108 90 90 66 54 –
– – 57 34 86 68 68 57 57 42 34 28
– – 114 68 172 136 136 114 114 84 68 –
– – 90 54 135 108 108 90 90 67 54 45
– – 180 108 270 216 216 180 180 134 108 –
– – 57 34 86 69 69 57 57 43 34 28
– – 114 68 172 138 138 114 114 86 68 56
– – 171 102 258 207 207 171 171 129 102 –
– – 57 34 86 68 68 57 57 42 34 28
– – 114 68 172 136 136 114 114 84 68 56
– – 171 102 258 204 204 171 171 126 102 –
– – 90 54 135 108 108 90 90 67 54 45
– – 180 108 270 216 216 180 180 134 108 90
– – 270 162 405 324 324 270 270 201 162 –
– – 90 54 135 108 108 90 90 67 54 45
– – 180 108 270 216 216 180 180 134 108 90
– – 270 162 405 324 324 270 270 201 162 –
Weidmüller
Terminal block
5.2 6.2 6.2 6.5 8.2 10.2 12.2 5.2 6.2
2.5 4 4 6 10 16 25 4 6
1.5 4 2.5 4 6 10 15 2.5 4
250 380 750 750 750 750 750 750 750
27 36 27 36 47 65 87 26 34
mmmmmmmmm
mmm––––––
–––mmmm––
–––––––mm
–––––––––
–––––––––
–––––––––
–––––––––
64–––––––
64–––––––
1612–––––––
1612–––––––
2620–––––––
2620–––––––
4133–––––––
––1097651210
– – 26 24 20 15 12 31 26
– – 48 45 37 29 24 58 48
– – 16 15 12 9 8 19 16
– – 33 30 25 19 16 38 32
– – 48 45 36 29 24 57 48
– – 86 74 61 48 40 96 80
– – 22 20 17 13 11 26 22
– – 44 40 34 26 – 52 44
– – 22 20 17 13 11 26 22
– – 44 40 34 26 – 52 44
– – 35 32 26 21 18 42 35
– – 70 64 52 42 – 84 70
– – 43 40 32 26 22 51 43
– – 86 86 64 52 – 102 86
– – 43 40 32 26 22 51 43
– – 86 86 64 52 – 102 86
– – 54 50 41 33 27 65 54
– – 108 100 – 66 – 130 108
– – 87 80 65 52 44 103 86
– – 174 160 – 104 – 206 172
– – 54 50 41 33 27 65 54
– – 108 100 82 66 54 130 108
– – 162 150 – 99 – 195 162
– – 54 50 41 33 27 65 54
– – 108 100 82 66 54 130 108
– – 162 150 – 99 – 195 162
– – 87 80 65 52 44 103 86
– – 174 160 130 104 88 206 172
– – 261 240 – 156 – 309 258
– – 87 80 65 52 44 103 86
– – 174 160 130 104 88 206 172
– – 261 240 – 156 – 309 258
8WA1011-
1DF11
8WA1011-
1DG11
8WA1011-
1DH11
8WA1204
8WA2011-
1DF20
8WA2011-
1DG20
8WA2011-
1DH20
302
50 x 45 x 30 mm
CA-020
Aluminium enclosure
UNTERTEIL
DECKEL
Type
Weight (g)
External dimensions (mm)
Complete enclosures
Coated, with gasket and lid screws
Coated, with gasket and hex. socket head screws
Coated, with silicone gasket and lid screws
Coated, with HF gasket and lid screws
Saltwater-proof coating, with gasket and lid screws
Saltwater-proof coating, passivated, lid screws with gasket
Unwashed, unpainted, no accessories
Accessories (separate or as a mounting set)
Mounting plate
TS 15 mounting rail
TS 32 mounting rail
TS 35 mounting rail
Grounding rail
External attachment brackets
External hinges side
Internal hinges with lid guiding**
Silicone gasket for wider temperature range (piece goods)
Max. Pg threads
58 x 64 x 36 mm
CA-060
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-020
70
50 x 45 x 30
Part number
102.0.0000.00 l
–
–
–
102.0.0100.00
102.0.0060.00
102.0.0340.00
–
–
–
–
–
–
–
–
–
ISO M 12 16 20 25 32 40 50 63
Side A/B 10000000
Side C/D 10000000
** mechanical enclosure machining required
l= kept in stock
CA-060
160
58 x 64 x 36
Part number
106.0.0000.00 l
–
106.0.0940.00
106.0.0080.00
106.0.0100.00
106.0.0060.00
106.0.0380.00
951.1.0010.00 l
982.0.0000.00 l
–
–
–
–
–
–
923.1.0050.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 21000000
Side C/D 10000000
** mechanical enclosure machining required
l= kept in stock
LID
BASE
LID
BASE
303
98 x 64 x 36 mm
CA-080
Aluminium enclosure
150 x 64 x 36 mm
CA-100
Aluminium enclosure
75 x 80 x 57 mm
CA-130
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-080
220
98 x 64 x 36
Part number
108.0.0000.00 l
–
108.0.0090.00
108.0.0080.00
108.0.0100.00
108.0.0060.00
108.0.0420.00
951.1.0020.00 l
982.0.0050.00 l
–
–
–
–
–
–
923.1.0050.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 43000000
Side C/D 10000000
** mechanical enclosure machining required
l= kept in stock
CA-100
330
150 x 64 x 36
Part number
110.0.0000.00 l
–
110.0.0760.00
110.0.0080.00
110.0.0100.00
110.0.0060.00
110.0.0530.00
951.1.0030.00 l
982.0.0110.00 l
–
–
–
–
–
–
923.1.0050.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 64000000
Side C/D 10000000
** mechanical enclosure machining required
l= kept in stock
CA-130
280
75 x 80 x 57
Part number
113.0.0000.00 l
–
113.0.0820.00
113.0.0080.00
113.0.0100.00
113.0.0060.00
113.0.0570.00
982.3.0150.00 l
982.0.0020.00 l
–
–
–
–
980.1.0440.00 l
–
923.1.0050.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 52100000
Side C/D 32100000
** mechanical enclosure machining required
l= kept in stock
Enclosures
LID
BASE
LID
BASE
LID
BASE
304
75 x 80 x 57 mm
CA-140
Aluminium enclosure
Type
Weight (g)
External dimensions (mm)
Complete enclosures
Coated, with gasket and lid screws
Coated, with gasket and hex. socket head screws
Coated, with silicone gasket and lid screws
Coated, with HF gasket and lid screws
Saltwater-proof coating, with gasket and lid screws
Saltwater-proof coating, passivated, lid screws with gasket
Unwashed, unpainted, no accessories
Accessories (separate or as a mounting set)
Mounting plate
TS 15 mounting rail
TS 32 mounting rail
TS 35 mounting rail
Grounding rail
External attachment brackets
External hinges side
Internal hinges with lid guiding**
Silicone gasket for wider temperature range (piece goods)
Max. Pg threads
125 x 80 x 57 mm
CA-150
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-140
280
75 x 80 x 57
Part number
114.0.0000.00 l
–
114.0.0860.00
114.0.0080.00
114.0.0100.00
114.0.0060.00
114.0.0800.00
951.1.0040.00 l
982.0.0350.00 l
–
–
–
–
980.1.0440.00 l
–
923.1.0050.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 52110000
Side C/D 32110000
** mechanical enclosure machining required
l= kept in stock
CA-150
435
125 x 80 x 57
Part number
115.0.0000.00 l
–
115.0.0090.00
115.0.0080.00
115.0.0100.00
115.0.0060.00
115.0.0190.00
982.3.0160.00 l
982.0.0100.00 l
–
–
–
–
980.1.0440.00 l
–
923.1.0050.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 10 4320000
Side C/D 32100000
** mechanical enclosure machining required
l= kept in stock
LID
BASE
LID
BASE
305
125 x 80 x 57 mm
CA-160
Aluminium enclosure
175 x 80 x 57 mm
CA-170
Aluminium enclosure
175 x 80 x 57 mm
CA-180
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-160
435
125 x 80 x 57
Part number
116.0.0000.00 l
–
116.0.1380.00
116.0.0080.00
116.0.0100.00
116.0.0060.00
116.0.0450.00
951.1.0050.00 l
982.0.0360.00 l
–
–
–
–
980.1.0440.00 l
–
923.1.0050.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 10 4320000
Side C/D 42110000
** mechanical enclosure machining required
l= kept in stock
CA-170
530
175 x 80 x 57
Part number
117.0.0000.00 l
–
117.0.0090.00
117.0.0080.00
117.0.0100.00
117.0.0060.00
117.0.0160.00
982.3.0170.00 l
982.0.0140.00 l
–
–
–
–
980.1.0440.00 l
–
923.1.0050.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 14 6440000
Side C/D 32100000
** mechanical enclosure machining required
l= kept in stock
CA-180
530
175 x 80 x 57
Part number
118.0.0000.00 l
–
118.0.0440.00
118.0.0080.00
118.0.0100.00
118.0.0060.00
118.0.0400.00
951.1.0060.00 l
982.0.0370.00 l
–
–
–
–
980.1.0440.00 l
–
923.1.0050.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 14 6440000
Side C/D 42110000
** mechanical enclosure machining required
l= kept in stock
Enclosures
LID
BASE
LID
BASE
LID
BASE
306
250 x 80 x 57 mm
CA-190
Aluminium enclosure
Type
Weight (g)
External dimensions (mm)
Complete enclosures
Coated, with gasket and lid screws
Coated, with gasket and hex. socket head screws
Coated, with silicone gasket and lid screws
Coated, with HF gasket and lid screws
Saltwater-proof coating, with gasket and lid screws
Saltwater-proof coating, passivated, lid screws with gasket
Unwashed, unpainted, no accessories
Accessories (separate or as a mounting set)
Mounting plate
TS 15 mounting rail
TS 32 mounting rail
TS 35 mounting rail
Grounding rail
External attachment brackets
External hinges side
Internal hinges with lid guiding**
Silicone gasket for wider temperature range (piece goods)
Max. Pg threads
122 x 122 x 80 mm
CA-210
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-190
710
250 x 80 x 57
Part number
119.0.0000.00 l
–
119.0.0480.00
119.0.0080.00
119.0.0100.00
119.0.0060.00
119.0.0260.00
982.3.0210.00 l
982.0.0190.00 l
–
–
–
–
980.1.0440.00 l
–
923.1.0050.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 22 9750000
Side C/D 32100000
** mechanical enclosure machining required
l= kept in stock
CA-210
940
122 x 122 x 80
Part number
121.0.0000.00 l
121.0.0010.00
121.0.0150.00
121.0.0080.00
121.0.0100.00
121.0.0060.00
121.0.0160.00
951.1.1500.00 l
–
982.1.0000.00 l
982.2.0010.00
981.0.0020.00
982.4.0240.00 l
980.1.0470.00 l
980.1.0310.00
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 12 6422000
Side C/D 52210000
** mechanical enclosure machining required
l= kept in stock
LID
BASE
LID
BASE
307
122 x 122 x 90 mm
CA-215
Aluminium enclosure
122 x 122 x 80 mm
CA-220
Aluminium enclosure
220 x 122 x 80 mm
CA-230
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-215
920
122 x 122 x 90
Part number
121.0.0000.50 l
121.0.0010.50
121.0.0110.50
121.0.0080.50
121.0.0100.50
121.0.0060.50
121.0.0120.50
951.1.1500.00 l
–
982.1.0000.00 l
982.2.0010.00 l
981.0.0020.00 l
982.4.0240.00 l
980.1.0470.00 l
980.1.0310.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 12 6422000
Side C/D 52210000
** mechanical enclosure machining required
l= kept in stock
CA-220
940
122 x 122 x 80
Part number
122.0.0000.00 l
122.0.0010.00
122.0.0270.00
122.0.0080.00
122.0.0100.00
122.0.0060.00
122.0.0610.00
951.1.0080.00 l
–
982.1.0000.00 l
982.2.0010.00 l
981.0.0020.00 l
982.4.0240.00 l
980.1.0470.00 l
980.1.0310.00
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 12 6422000
Side C/D 52210000
** mechanical enclosure machining required
l= kept in stock
CA-230
1410
220 x 122 x 80
Part number
123.0.0000.00 l
123.0.0010.00
123.0.0160.00
123.0.0080.00
123.0.0100.00
123.0.0060.00
123.0.0150.00
951.1.0950.00 l
–
982.1.0050.00 l
982.2.0070.00 l
981.0.0080.00 l
982.4.0240.00 l
980.1.0470.00 l
980.1.0310.00
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 27 12 854000
Side C/D 52210000
** mechanical enclosure machining required
l= kept in stock
Enclosures
LID
BASE
LID
BASE
LID
BASE
308
220 x 122 x 90 mm
CA-235
Aluminium enclosure
Type
Weight (g)
External dimensions (mm)
Complete enclosures
Coated, with gasket and lid screws
Coated, with gasket and hex. socket head screws
Coated, with silicone gasket and lid screws
Coated, with HF gasket and lid screws
Saltwater-proof coating, with gasket and lid screws
Saltwater-proof coating, passivated, lid screws with gasket
Unwashed, unpainted, no accessories
Accessories (separate or as a mounting set)
Mounting plate
TS 15 mounting rail
TS 32 mounting rail
TS 35 mounting rail
Grounding rail
External attachment brackets
External hinges side
Internal hinges with lid guiding**
Silicone gasket for wider temperature range (piece goods)
Max. Pg threads
220 x 122 x 80 mm
CA-240
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-235
1410
220 x 122 x 90
Part number
123.0.0000.50 l
123.0.0010.50
123.0.0110.50
123.0.0080.50
123.0.0100.50
123.0.0060.50
123.0.0120.50
951.1.0950.00 l
–
982.1.0050.00 l
982.2.0070.00 l
981.0.0080.00 l
982.4.0240.00 l
980.1.0470.00 l
980.1.0310.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 27 12 854000
Side C/D 52210000
** mechanical enclosure machining required
l= kept in stock
CA-240
1410
220 x 122 x 80
Part number
124.0.0000.00 l
124.0.0010.00
124.0.0970.00
124.0.0080.00
124.0.0100.00
124.0.0060.00
124.0.0820.00
951.1.0090.00 l
–
982.1.0050.00 l
982.2.0070.00 l
981.0.0080.00 l
982.0.0240.00 l
980.1.0470.00 l
980.1.0310.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 27 12 854000
Side C/D 52210000
** mechanical enclosure machining required
l= kept in stock
LID
BASE
LID
BASE
309
360 x 122 x 80 mm
CA-250
Aluminium enclosure
160 x 160 x 90 mm
CA-270
Aluminium enclosure
160 x 160 x 90 mm
CA-280
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-250
1860
360 x 122 x 80
Part number
125.0.0000.00 l
125.0.0010.00
125.0.1240.00
125.0.0080.00
125.0.0100.00
125.0.0060.00
125.0.0110.00
951.1.1740.00 l
–
982.1.0120.00 l
982.2.0150.00 l
981.0.0140.00 l
982.4.0240.00 l
980.1.0470.00 l
980.1.0310.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 48 21 16 96000
Side C/D 52210000
** mechanical enclosure machining required
l= kept in stock
CA-270
1410
160 x 160 x 90
Part number
127.0.0000.00 l
127.0.0010.00
127.0.0120.00
127.0.0080.00
127.0.0100.00
127.0.0060.00
127.0.0130.00
951.1.1490.00 l
–
982.1.0020.00 l
982.2.0030.00 l
981.0.0040.00 l
982.4.0240.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 20 9642210
Side C/D 84322000
** mechanical enclosure machining required
l= kept in stock
CA-280
1410
160 x 160 x 90
Part number
128.0.0000.00 l
128.0.0010.00
128.0.0590.00
128.0.0080.00
128.0.0100.00
128.0.0060.00
128.0.0330.00
951.1.0110.00 l
–
982.1.0020.00 l
982.2.0030.00 l
981.0.0040.00 l
982.4.0240.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 20 9642210
Side C/D 84322000
** mechanical enclosure machining required
l= kept in stock
Enclosures
LID
BASE
LID
BASE
LID
BASE
310
260 x 160 x 90 mm
CA-290
Aluminium enclosure
Type
Weight (g)
External dimensions (mm)
Complete enclosures
Coated, with gasket and lid screws
Coated, with gasket and hex. socket head screws
Coated, with silicone gasket and lid screws
Coated, with HF gasket and lid screws
Saltwater-proof coating, with gasket and lid screws
Saltwater-proof coating, passivated, lid screws with gasket
Unwashed, unpainted, no accessories
Accessories (separate or as a mounting set)
Mounting plate
TS 15 mounting rail
TS 32 mounting rail
TS 35 mounting rail
Grounding rail
External attachment brackets
External hinges side
Internal hinges with lid guiding**
Silicone gasket for wider temperature range (piece goods)
Max. Pg threads
260 x 160 x 90 mm
CA-300
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-290
1960
260 x 160 x 90
Part number
129.0.0000.00 l
129.0.0010.00
129.0.0470.00
129.0.0080.00
129.0.0100.00
129.0.0060.00
129.0.0110.00
951.1.0960.00 l
–
982.1.0080.00 l
982.2.0110.00 l
981.0.0100.00 l
982.4.0240.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 36 17 12 74330
Side C/D 84322000
** mechanical enclosure machining required
l= kept in stock
CA-300
1960
260 x 160 x 90
Part number
130.0.0000.00 l
130.0.0010.00
130.0.0640.00
130.0.0080.00
130.0.0100.00
130.0.0060.00
130.0.0410.00
951.1.0120.00 l
–
982.1.0080.00 l
982.2.0110.00 l
981.0.0100.00 l
982.4.0240.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 36 17 12 74330
Side C/D 84322000
** mechanical enclosure machining required
l= kept in stock
LID
BASE
LID
BASE
311
360 x 160 x 90 mm
CA-310
Aluminium enclosure
560 x 160 x 90 mm
CA-330
Aluminium enclosure
200 x 230 x 110 mm
CA-350
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-310
2550
360 x 160 x 90
Part number
131.0.0000.00 l
131.0.0010.00
131.0.1580.00
131.0.0080.00
131.0.0100.00
131.0.0060.00
131.0.0710.00
951.1.1750.00 l
–
982.1.0120.00 l
982.2.0150.00 l
981.0.0420.00 l
982.4.0240.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 54 26 18 11 6540
Side C/D 84322000
** mechanical enclosure machining required
l= kept in stock
CA-330
4310
560 x 160 x 90
Part number
133.0.0000.00 l
133.0.0010.00
133.0.0560.00
133.0.0080.00
133.0.0100.00
133.0.0060.00
133.0.0220.00
951.1.0140.00 l
–
982.1.0150.00 l
982.2.0180.00 l
981.0.0160.00 l
982.4.0240.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0090.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 84 40 28 16 10 8 6 0
Side C/D 84322000
** mechanical enclosure machining required
l= kept in stock
CA-350
2730
200 x 230 x 110
Part number
135.0.0000.00 l
135.0.0010.00
135.0.0780.00
135.0.0080.00
135.0.0100.00
135.0.0060.00
135.0.0170.00
951.1.0150.00 l
–
982.1.0030.00 l
982.2.0050.00 l
981.0.0070.00 l
982.4.0230.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 35 15 12 84322
Side C/D 26 12 853221
** mechanical enclosure machining required
l= kept in stock
Enclosures
LID
BASE
LID
BASE
LID
BASE
312
200 x 230 x 180 mm
CA-360
Aluminium enclosure
Type
Weight (g)
External dimensions (mm)
Complete enclosures
Coated, with gasket and lid screws
Coated, with gasket and hex. socket head screws
Coated, with silicone gasket and lid screws
Coated, with HF gasket and lid screws
Saltwater-proof coating, with gasket and lid screws
Saltwater-proof coating, passivated, lid screws with gasket
Unwashed, unpainted, no accessories
Accessories (separate or as a mounting set)
Mounting plate
TS 15 mounting rail
TS 32 mounting rail
TS 35 mounting rail
Grounding rail
External attachment brackets
External hinges side
Internal hinges with lid guiding**
Silicone gasket for wider temperature range (piece goods)
Max. Pg threads
280 x 230 x 110 mm
CA-370
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-360
3680
200 x 230 x 180
Part number
136.0.0000.00 l
136.0.0010.00
136.0.0440.00
136.0.0080.00
136.0.0100.00
136.0.0060.00
136.0.0430.00
951.1.0150.00 l
–
982.1.0030.00 l
982.2.0050.00 l
981.0.0070.00 l
982.4.0230.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 56 32 20 13 9544
Side C/D 52 27 18 12 8533
** mechanical enclosure machining required
l= kept in stock
CA-370
3840
280 x 230 x 110
Part number
137.0.0000.00 l
137.0.0010.00
137.0.0730.00
137.0.0080.00
137.0.0100.00
137.0.0060.00
137.0.0150.00
951.1.0160.00 l
–
982.1.0090.00 l
982.2.0120.00 l
981.0.0110.00 l
982.4.0230.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 53 25 18 11 7433
Side C/D 26 12 853221
** mechanical enclosure machining required
l= kept in stock
LID
BASE
LID
BASE
313
330 x 230 x 110 mm
CA-380
Aluminium enclosure
330 x 230 x 180 mm
CA-390
Aluminium enclosure
400 x 230 x 110 mm
CA-400
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-380
4270
330 x 230 x 110
Part number
138.0.0000.00 l
138.0.0010.00
138.0.0520.00
138.0.0080.00
138.0.0100.00
138.0.0060.00
138.0.0140.00
951.1.0170.00 l
–
982.1.0110.00 l
982.2.0140.00 l
981.0.0130.00 l
982.4.0230.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 65 30 23 12 9543
Side C/D 24 12 853221
** mechanical enclosure machining required
l= kept in stock
CA-390
5300
330 x 230 x 180
Part number
139.0.0000.00 l
139.0.0010.00
139.0.0200.00
139.0.0080.00
139.0.0100.00
139.0.0060.00
139.0.0120.00
951.1.0170.00 l
–
982.1.0110.00 l
982.2.0140.00 l
981.0.0130.00 l
982.4.0230.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 108 54 40 25 15 9 8 6
Side C/D 52 27 18 12 8533
** mechanical enclosure machining required
l= kept in stock
CA-400
4870
400 x 230 x 110
Part number
140.0.0000.00 l
140.0.0010.00
140.0.0620.00
140.0.0080.00
140.0.0100.00
140.0.0060.00
140.0.0130.00
951.1.2940.00 l
–
982.1.0140.00 l
982.2.0170.00 l
981.0.0150.00 l
982.4.0230.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 80 38 27 17 11 6 5 4
Side C/D 26 12 853221
** mechanical enclosure machining required
l= kept in stock
Enclosures
LID
BASE
LID
BASE
LID
BASE
314
600 x 230 x 110 mm
CA-420
Aluminium enclosure
Type
Weight (g)
External dimensions (mm)
Complete enclosures
Coated, with gasket and lid screws
Coated, with gasket and hex. socket head screws
Coated, with silicone gasket and lid screws
Coated, with HF gasket and lid screws
Saltwater-proof coating, with gasket and lid screws
Saltwater-proof coating, passivated, lid screws with gasket
Unwashed, unpainted, no accessories
Accessories (separate or as a mounting set)
Mounting plate
TS 15 mounting rail
TS 32 mounting rail
TS 35 mounting rail
Grounding rail
External attachment brackets
External hinges side
Internal hinges with lid guiding**
Silicone gasket for wider temperature range (piece goods)
Max. Pg threads
402.5 x 310 x 110 mm
CA-450
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-420
6380
600 x 230 x 110
Part number
142.0.0000.00 l
142.0.0010.00
142.0.0550.00
142.0.0080.00
142.0.0100.00
142.0.0060.00
142.0.0110.00
951.1.0190.00 l
–
982.1.0160.00 l
982.2.0190.00 l
981.0.0170.00 l
982.4.0230.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0060.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 120 56 42 24 16 8 8 6
Side C/D 28 13 853221
** mechanical enclosure machining required
l= kept in stock
CA-450
5810
402.5 x 310 x 110
Part number
145.0.0000.00 l
145.0.0010.00
145.0.0520.00
145.0.0080.00
145.0.0100.00
145.0.0060.00
145.0.0250.00
951.1.0200.00 l
–
982.1.0140.00 l
982.2.0170.00 l
981.0.0150.00 l
982.4.0230.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0090.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 80 38 27 17 11 6 5 4
Side C/D 38 21 13 75432
** mechanical enclosure machining required
l= kept in stock
LID
BASE
LID
BASE
315
402.5 x 310 x 180 mm
CA-460
Aluminium enclosure
600 x 310 x 110 mm
CA-470
Aluminium enclosure
600 x 310 x 180 mm
CA-480
Aluminium enclosure
* minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support
CA-460
7420
402.5 x 310 x 180
Part number
146.0.0000.00 l
146.0.0010.00
146.0.0130.00
146.0.0080.00
146.0.0100.00
146.0.0060.00
146.0.0490.00
951.1.0200.00 l
–
982.1.0140.00 l
982.2.0170.00 l
981.0.0150.00 l
982.4.0230.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0090.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 136 68 50 30 21 12 10 8
Side C/D 74 38 28 18 12 8 6 3
** mechanical enclosure machining required
l= kept in stock
CA-470
8480
600 x 310 x 110
Part number
147.0.0000.00 l
147.0.0010.00
147.0.0560.00
147.0.0080.00
147.0.0100.00
147.0.0060.00
147.0.0620.00
951.1.0210.00 l
–
982.1.0160.00 l
982.2.0190.00 l
981.0.0170.00 l
982.4.0230.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0090.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 120 56 42 24 16 8 8 6
Side C/D 38 17 13 75432
** mechanical enclosure machining required
l= kept in stock
CA-480
10840
600 x 310 x 180
Part number
148.0.0000.00 l
148.0.0010.00
148.0.0450.00
148.0.0080.00
148.0.0100.00
148.0.0060.00
148.0.0170.00
951.1.0210.00 l
–
982.1.0160.00 l
982.2.0190.00 l
981.0.0170.00 l
982.4.0230.00 l
980.1.0470.00 l
980.1.0300.00 l
923.1.0090.00 l
ISO M 12 16 20 25 32 40 50 63
Side A/B 200 100 76 46 30 18 14 12
Side C/D 74 38 28 18 12 8 6 5
** mechanical enclosure machining required
l= kept in stock
Enclosures
LID
BASE
LID
BASE
LID
BASE
