3MTM Low Profile Header .100" x .100" Straight and Right Angle, Four-Wall * * * * * * * 303 Series All over gold flash Sturdy body End windows Low cost Straight or right angle Ejector/latch option not available Regulatory Information: Visit 3M.com/regs or contact your 3M representative to find the RoHS compliance status of the 3M part you are interested in. Date Modified: September 04, 2019 TS-0818 -D Sheet 1 of 3 Physical Insulation: Material: Glass Filled Polyester (PBT) Flammability: UL 94V-0 Color: Black Contact: Material: Brass Plating: Underplating: 30 " [ 0.76 m ] Nickel Wiping Area and Solder Tails: Gold Flash Marking: Orientation Triangle Electrical Current Rating: 1 A Insulation Resistance: >1 x 109 at 500 VDC Withstanding Voltage: 500 VRMS at Sea Level Environmental Temperature Rating: -55C to +105C Process Temperature: Maximum insulator temperature 191C max, solder wave process only UL File No.: E68080 3 Electronics Materials Solutions Division Interconnect Solutions http://www.3M.com/interconnect 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Low Profile Header .100" x .100" Straight and Right Angle, Four-Wall 303 Series Straight Table 1 Pin Quantity .100 Ref [2.54] B Position 2 .108 [ 2.74 ] .015 [ 0.38 ] .33 [ 8.4 ] .100 Ref [2.54] .256 .008 [6.50] Position 1 Position 1 Orientation Triangle .27 [ 6.86 ] .16 [4.1] Dimensions A B 06 .60 [ 15.4 ] .51 [ 12.9 ] 08 .70 [ 17.8 ] .61 [ 15.5 ] 10 .80 [ 20.3 ] .71 [ 18.0 ] 14 1.00 [ 25.4 ] .91 [ 23.1 ] 16 1.10 [ 27.9 ] 1.01 [ 25.6 ] 20 1.30 [ 33.0 ] 1.21 [ 30.7 ] 26 1.60 [ 40.6 ] 1.51 [ 38.4 ] 34 2.00 [ 50.8 ] 1.91 [ 48.5 ] 36 2.10 [ 53.6 ] 2.01 [ 51.0 ] 40 2.30 [ 58.4 ] 2.21 [ 56.1 ] 50 2.80 [ 71.1 ] 2.71 [ 68.8 ] A .365 .010 .015 [9.3] [ 0.38 ] .025 .002 Sq Ref. [0.64] .236 .008 [ 5.99 ] .25 [6.4] A A .02 .110 .008 [ 2.79 ] .400 [10.16] Min End Stackable Distance .250 [6.35] Min Side Stackable Distance o.040 .003 [ 1.02 ] .100 Ref [2.54] .197 [ 5.00 ] Section A-A Position 1 as indicated by Triangle Inch [mm] .100 .003 [2.54] .100 .003 [2.54] Tolerance Unless Noted Recommended P.C. Board Hole Pattern Inch (Shown for mounting side of board.) Note 1: No ejector/latch option available. 2. Low temperature plastic. Check compatibility with "no lead" processing conditions prior to production use. Ordering Information .0 .00 .000 .1 .01 .005 [ ] Dimensions for Reference only 303XX - 6002HB (RIA E1 and C1 apply) Pin Quantity: (See Table 1) HB - Gold Flash TS-0818-D Sheet 2 of 3 3 Electronics Materials Solutions Division Interconnect Solutions http://www.3M.com/interconnect 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Low Profile Header .100" x .100" Straight and Right Angle, Four-Wall 303 Series Right Angle Table 1 Dimensions A B Pin Quantity B .108 [ 2.74 ] Position 2 .015 [ 0.38 ] .100 Ref [2.54] .33 [ 8.4 ] .100 Ref [2.54] .256 .008 [ 6.50 ] Position 1 .16 [4.1] Position 1 Orientation Triangle 06 .60 [ 15.2 ] .51 [ 12.9 ] 08 .70 [ 17.8 ] .61 [ 15.5 ] 10 .80 [ 20.3 ] .71 [ 18.0 ] 14 1.00 [ 25.4 ] .91 [ 23.1 ] 16 1.10 [ 27.9 ] 1.01 [ 25.6 ] 20 1.30 [ 33.0 ] 1.21 [ 30.7 ] 26 1.60 [ 40.6 ] 1.51 [ 38.4 ] 34 2.00 [ 50.8 ] 1.91 [ 48.5 ] 36 2.10 [ 53.6 ] 2.01 [ 51.0 ] 40 2.30 [ 58.4 ] 2.21 [ 56.1 ] 50 2.80 [ 71.1 ] 2.71 [ 68.8 ] .025 .002 Sq Ref [0.64] .25 [6.4] A .236 .008 [ 5.99 ] .27 [6.86 ] o.365 .010 [ 9.3 ] .056 .008 [ 14.2 ] .015 [ 0.381 ] A .100 Ref [2.54] A .02 .110 .008 [ 2.79 ] Section A-A .100 .003 [2.54] .41 [10.4] Max Dim to Edge of PCB for Bussing o .040 .003 [ 1.02 ] Inch [mm] Position 1 Tolerance Unless Noted .400 [10.16] Min End Stackable Distance .100 .003 [2.54] Inch Recommended P.C. Board Hole Pattern .0 .00 .000 .1 .01 .005 [ ] Dimensions for Reference only ( Shown for mounting side of board ) Note 1: No ejector/latch option available. Ordering Information 303XX - 5002HB (RIA E1 and C1 apply) Pin Quantity: (See Table 1) HB - Gold Flash TS-0818-D Sheet 3 of 3 3 Electronics Materials Solutions Division Interconnect Solutions http://www.3M.com/interconnect 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3M Company Electronics Materials Solutions Division 13011 McCallen Pass, Bldg. C Austin, TX 78753-5380 1-800-225-5373 www.3M.com/interconnect Electronics Materials Solutions Division Please recycle. Printed in USA. (c) Interconnect Solutions 3M 2019. All rights reserved. http://www.3M.com/interconnect RIA-2217B-E 3M is a trademark of 3M Company.