R76 MMKP Series polyPROPYLENE capacitor WITH DOUBLE SIDED METALLIZED FILM ELECTRODES D.C. AND PULSE APPLICATIONS Loose Typical applications: deflection circuits in TV-sets (Scorrection and fly-back tuning) and monitors, switching spikes suppression in SMPS, lamp capacitor for electronic ballast and compact lamps, snubber and SCR commutating circuits, applications with high voltage and high current. Taped PRODUCT CODE: R76 B Od0.05 p = 7.5 3,5 >3,5 0.5 0.6 p =10 all 0.6 15 p 27.5 all 0.8 p = 37.5 all 1.0 All dimensions are in mm. Pitch (mm) Box thickness (mm) 7.5 10.0 15.0 15.0 22.5 27.5 37.5 All All <7.5 7.5 All All All Maximum dimensions (mm) B max H max L max B +0.1 B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 Product code system GENERAL TECHNICAL DATA The part number, comprising 14 digits, is formed as follows: Dielectric: polypropylene film. double sided metallized polyester film. Plates: Winding: non-inductive type. 1 2 3 4 5 6 7 8 9 10 11 12 13 R 7 6 14 - Leads: Digit 1 to 3 Series code. Digit 4 d.c. rated voltage: I = 250V M = 400V P = 630V Q = 1000V T = 1600V U = 2000V Digit 5 Pitch: D=7.5 mm; F=10mm; I=15mm; N=22.5mm; R=27.5mm; W=37.5mm. Digit 6 to 9 for O 0,6mm : tinned wire for O = 0,5mm : tinned wire, low thermical conductivity Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: manufacturer's logo, series (R76), dielectric code (MKP), capacitance, tolerance, D.C. rated voltage, manufacturing date code. Climatic category: 55/105/56 IEC 60068-1 Operating temperature range: -55 to +105C Related documents: IEC 60384-16 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use. Digit 14 Capacitance tolerance: H=2.5%; J=5%; K=10% Table 1 (for more detailed information, please refer to pages 14). Standard packaging style Lead length (mm) AMMO-PACK AMMO-PACK AMMO-PACK REEL O 355mm REEL O 355mm REEL O 500mm REEL O 500mm Loose, short leads Loose, long leads (p<10mm) Loose, long leads (p10mm) Loose, long leads (p15mm) Taping style P2 (mm) 06.35 12.70 19.05 06.35 12.70 12.70 19.05 Fig. (No.) 1 2 3 1 2 2 3 Ordering code Pitch (mm) 7.5 10.0/15.0 22.5 7.5 10.0/15.0 10.0/15.0 22.5/27.5 (Digit 10 to 11) 04+2 DQ DQ DQ CK GY CK CK SE 17+1/-2 Z3 18+1/-1 JM 30 25+2/-1 40 50 +5 Note: Ammo-pack is the preferred packaging for taped version 09/2008 L +0.2 L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 116 R76 MMKP Series polyPROPYLENE capacitor WITH DOUBLE SIDED METALLIZED FILM ELECTRODES D.C. AND PULSE APPLICATIONS PRODUCT CODE: R76 double sided metallized polyester carrier film polypropylene film dielectric 1 section (250Vdc) 6800 pF B 3.0 H L 8.0 10.0 p 7.5 Max dv/dt (V/s) 1100 8200 pF 3.0 8.0 10.0 7.5 1100 55 E4 0.010 F 3.0 8.0 10.0 7.5 1100 55 E4 0.012 F 4.0 9.0 10.0 7.5 1100 55 E4 0.015 F 4.0 9.0 10.0 7.5 1100 55 E4 0.018 F 4.0 9.0 10.0 7.5 1100 55 E4 0.022 F 4.0 9.0 10.0 7.5 1100 55 E4 0.027 F 5.0 10.5 10.0 7.5 1100 55 E4 0.033 F 5.0 10.5 10.0 7.5 1100 55 E4 0.039 F 6.0 12.0 10.5 7.5 1100 55 E4 0.047 F 6.0 12.0 10.5 7.5 1100 55 E4 0.027 F 4.0 9.0 13.0 10.0 1000 50 E4 0.033 F 4.0 9.0 13.0 10.0 1000 50 E4 0.039 F 4.0 9.0 13.0 10.0 1000 50 E4 0.047 F 5.0 11.0 13.0 10.0 1000 50 E4 0.056 F 5.0 11.0 13.0 10.0 1000 50 E4 0.068 F 6.0 12.0 13.0 10.0 1000 50 E4 0.082 F 6.0 12.0 13.0 10.0 1000 50 E4 0.068 F 5.0 11.0 18.0 15.0 550 28 E4 0.082 F 5.0 11.0 18.0 15.0 550 28 E4 0.10 F 5.0 11.0 18.0 15.0 550 28 E4 0.12 F 6.0 12.0 18.0 15.0 550 28 E4 0.15 F 6.0 12.0 18.0 15.0 550 28 E4 0.18 F 7.5 13.5 18.0 15.0 550 28 E4 0.18 F 9.0 12.5 18.0 15.0 550 28 E4 0.22 F 7.5 13.5 18.0 15.0 550 28 E4 0.22 F 9.0 12.5 18.0 15.0 550 28 E4 0.27 F 8.5 14.5 18.0 15.0 550 28 E4 0.27 F 9.0 12.5 18.0 15.0 550 28 E4 0.33 F 10.0 16.0 18.0 15.0 550 28 E4 0.33 F 13.0 12.0 18.0 15.0 550 28 E4 0.39 F 10.0 16.0 18.0 15.0 550 28 E4 Rated Cap. 0.47 250Vdc / 180Vac Std dimensions F 11.0 19.0 18.0 15.0 550 Max K0 (V /s) 55 E4 F B H L p 6.0 15.0 26.5 22.5 0.27 F 6.0 15.0 26.5 22.5 250 13 E4 0.33 F 6.0 15.0 26.5 22.5 250 13 E4 0.39 F 7.0 16.0 26.5 22.5 250 13 E4 0.47 F 7.0 16.0 26.5 22.5 250 13 E4 0.56 F 8.5 17.0 26.5 22.5 250 13 E4 0.68 F 10.0 18.5 26.5 22.5 250 13 E4 R76ID2270--4-- 0.82 F 10.0 18.5 26.5 22.5 250 13 E4 R76ID2330--4-- 1.0 F 11.0 20.0 26.5 22.5 250 13 E4 R76ID2390--3-- 1.2 F 13.0 22.0 26.5 22.5 250 13 E4 R76ID2470--3-- 0.82 F 9.0 17.0 32.0 27.5 200 10 E4 R76IF 2270--3-- 1.0 F 11.0 20.0 32.0 27.5 200 10 E4 R76IF 2330--3-- 1.2 F 11.0 20.0 32.0 27.5 200 10 E4 R76IF 2390--3-- 1.5 F 13.0 22.0 32.0 27.5 200 10 E4 R76IF 2470--3-- 1.8 F 13.0 22.0 32.0 27.5 200 10 E4 R76IF 2560--3-- 2.2 F 14.0 28.0 32.0 27.5 200 10 E4 R76IF 2680--3-- 2.7 F 18.0 33.0 32.0 27.5 200 10 E4 R76IF 2820--3-- 3.3 F 18.0 33.0 32.0 27.5 200 10 E4 R76II 2680--3-- 3.9 F 18.0 33.0 32.0 27.5 200 10 E4 R76II 2820--3-- 4.7 F 22.0 37.0 32.0 27.5 200 10 E4 R76II 3100--3-- 5.6 F 22.0 37.0 32.0 27.5 200 10 E4 R76II 3120--3-- 1.2 F 11.0 22.0 41.5 37.5 100 5 E4 R76II 3150--3-- 1.5 F 11.0 22.0 41.5 37.5 100 5 E4 R76II 3180--3-- 1.8 F 11.0 22.0 41.5 37.5 100 5 E4 R76II 3180--7-- 2.2 F 13.0 24.0 41.5 37.5 100 5 E4 R76II 3220--3-- 2.7 F 13.0 24.0 41.5 37.5 100 5 E4 R76II 3220--7-- 3.3 F 16.0 28.5 41.5 37.5 100 5 E4 R76II 3270--3-- 3.9 F 16.0 28.5 41.5 37.5 100 5 E4 R76II 3270--7-- 4.7 F 19.0 32.0 41.5 37.5 100 5 E4 R76II 3330--3-- 5.6 F 19.0 32.0 41.5 37.5 100 5 E4 R76II 3330--7-- 6.8 F 20.0 40.0 41.5 37.5 100 5 E4 R76II 3390--3-- 8.2 F 20.0 40.0 41.5 37.5 100 5 E4 R76II 3470--3-- 10.0 F 24.0 44.0 41.5 37.5 100 5 E4 12.0 F 30.0 45.0 41.5 37.5 100 5 E4 15.0 F 30.0 45.0 41.5 37.5 100 5 E4 2 28 E4 Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) All dimensions are in mm. 0.22 Max dv/dt (V/s) 250 Rated Cap. Part Number R76ID1680--3-- R76ID1820--3-R76ID2100--3-R76ID2120--4-R76ID2150--4-R76ID2180--4-R76ID2220--4-- 250Vdc / 180Vac Std dimensions Max K0 (V /s) 13 E4 Part Number 2 R76IN 3220--0-- R76IN 3270--3-R76IN 3330--3-R76IN 3390--3-R76IN 3470--3-R76IN 3560--3-R76IN 3680--3-R76IN 3820--3-R76IN 4100--3-R76IN 4120--3-R76IR 3820--3-R76IR 4100--3-R76IR 4120--4-R76IR 4150--3-R76IR 4180--4-R76IR 4220--4-R76IR 4270--3-R76IR 4330--3-R76IR 4390--3-R76IR 4470--3-R76IR 4560--4-- R76IW4120--3-R76IW4150--3-R76IW4180--3-R76IW4220--3-R76IW4270--3-R76IW4330--3-R76IW4390--3-R76IW4470--3-R76IW4560--3-R76IW4680--3-R76IW4820--3-R76IW5100--3-R76IW5120--3-R76IW5150--3-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. 117 09/2008 R76 MMKP Series polyPROPYLENE capacitor WITH DOUBLE SIDED METALLIZED FILM ELECTRODES D.C. AND PULSE APPLICATIONS PRODUCT CODE: R76 double sided metallized polyester carrier film polypropylene film dielectric 1 section (400Vdc) 2700 pF B 3.0 H L 8.0 10.0 p 7.5 Max dv/dt (V/s) 1700 3300 pF 3.0 8.0 10.0 7.5 1700 136 E4 3900 pF 3.0 8.0 10.0 7.5 1700 136 E4 4700 pF 3.0 8.0 10.0 7.5 1700 136 E4 5600 pF 3.0 8.0 10.0 7.5 1700 136 E4 6800 pF 4.0 9.0 10.0 7.5 1700 136 E4 8200 pF 4.0 9.0 10.0 7.5 1700 136 E4 0.010 F 4.0 9.0 10.0 7.5 1700 136 E4 0.012 F 4.0 9.0 10.0 7.5 1700 136 E4 0.015 F 5.0 10.5 10.0 7.5 1700 136 E4 0.018 F 5.0 10.5 10.0 7.5 1700 136 E4 0.022 F 6.0 12.0 10.5 7.5 1700 136 E4 0.027 F 6.0 12.0 10.5 7.5 1700 136 E4 0.010 F 4.0 9.0 13.0 10.0 1500 120 E4 0.012 F 4.0 9.0 13.0 10.0 1500 120 E4 0.015 F 4.0 9.0 13.0 10.0 1500 120 E4 0.018 F 4.0 9.0 13.0 10.0 1500 120 E4 0.022 F 4.0 9.0 13.0 10.0 1500 120 E4 0.027 F 5.0 11.0 13.0 10.0 1500 120 E4 0.033 F 5.0 11.0 13.0 10.0 1500 120 E4 0.039 F 6.0 12.0 13.0 10.0 1500 120 E4 0.047 F 6.0 12.0 13.0 10.0 1500 120 E4 0.033 F 5.0 11.0 18.0 15.0 900 72 E4 0.039 F 5.0 11.0 18.0 15.0 900 72 E4 0.047 F 5.0 11.0 18.0 15.0 900 72 E4 0.056 F 5.0 11.0 18.0 15.0 900 72 E4 0.068 F 6.0 12.0 18.0 15.0 900 72 E4 0.082 F 6.0 12.0 18.0 15.0 900 72 E4 0.10 F 7.5 13.5 18.0 15.0 900 72 E4 0.10 F 9.0 12.5 18.0 15.0 900 72 E4 0.12 F 7.5 13.5 18.0 15.0 900 72 E4 0.12 F 9.0 12.5 18.0 15.0 900 72 E4 0.15 F 8.5 14.5 18.0 15.0 900 72 E4 0.15 F 13.0 12.0 18.0 15.0 900 72 E4 0.18 F 10.0 16.0 18.0 15.0 900 72 E4 0.18 F 13.0 12.0 18.0 15.0 900 72 E4 0.22 F 10.0 16.0 18.0 15.0 900 72 E4 0.27 F 11.0 19.0 18.0 15.0 900 72 E4 Rated Cap. 400Vdc / 250Vac* Std dimensions Max K0 (V2/s) 136 E4 Rated Cap. Part Number 400Vdc / 250Vac* Std dimensions Max dv/dt (V/s) 500 Max K0 (V2/s) 40 E4 0.12 F B H L p 6.0 15.0 26.5 22.5 R76MD 1330--3-- 0.15 F 6.0 15.0 26.5 22.5 500 40 E4 R76MD 1390--3-- 0.18 F 6.0 15.0 26.5 22.5 500 40 E4 R76MD 1470--3-- 0.22 F 7.0 16.0 26.5 22.5 500 40 E4 R76MD 1560--3-- 0.27 F 8.5 17.0 26.5 22.5 500 40 E4 R76MD 1680--4-- 0.33 F 8.5 17.0 26.5 22.5 500 40 E4 R76MD 1820--4-- 0.39 F 10.0 18.5 26.5 22.5 500 40 E4 R76MD 2100--4-- 0.47 F 10.0 18.5 26.5 22.5 500 40 E4 R76MD 2120--4-- 0.56 F 11.0 20.0 26.5 22.5 500 40 E4 R76MD 2150--4-- 0.68 F 13.0 22.0 26.5 22.5 500 40 E4 R76MD 2180--4-- 0.39 F 9.0 17.0 32.0 27.5 300 24 E4 R76MD 2220--3-- 0.47 F 9.0 17.0 32.0 27.5 300 24 E4 R76MD 2270--3-- 0.56 F 11.0 20.0 32.0 27.5 300 24 E4 R76MF 2100--0-- 0.68 F 11.0 20.0 32.0 27.5 300 24 E4 R76MF 2120--0-- 0.82 F 13.0 22.0 32.0 27.5 300 24 E4 R76MF 2150--3-- 1.0 F 13.0 22.0 32.0 27.5 300 24 E4 R76MF 2180--3-- 1.2 F 14.0 28.0 32.0 27.5 300 24 E4 R76MF 2220--3-- 1.5 F 18.0 33.0 32.0 27.5 300 24 E4 R76MF 2270--3-- 1.8 F 18.0 33.0 32.0 27.5 300 24 E4 R76MF 2330--3-- 2.2 F 22.0 37.0 32.0 27.5 300 24 E4 R76MF 2390--3-- 2.7 F 22.0 37.0 32.0 27.5 300 24 E4 R76MF2470--3-- 1.0 F 11.0 22.0 41.5 37.5 180 14 E4 R76MI 2330--0-- 1.2 F 13.0 24.0 41.5 37.5 180 14 E4 R76MI 2390--3-- 1.5 F 13.0 24.0 41.5 37.5 180 14 E4 R76MI 2470--3-- 1.8 F 16.0 28.5 41.5 37.5 180 14 E4 R76MI 2560--3-- 2.2 F 19.0 32.0 41.5 37.5 180 14 E4 R76MI 2680--3-- 2.7 F 19.0 32.0 41.5 37.5 180 14 E4 R76MI 2820--3-- 3.3 F 19.0 32.0 41.5 37.5 180 14 E4 R76MI 3100--3-- 3.9 F 20.0 40.0 41.5 37.5 180 14 E4 R76MI 3100--7-- 4.7 F 20.0 40.0 41.5 37.5 180 14 E4 R76MI 3120--3-- 5.6 F 24.0 44.0 41.5 37.5 180 14 E4 R76MI 3120--7-- 6.8 F 30.0 45.0 41.5 37.5 180 14 E4 R76MI 3150--3-- 8.2 F 30.0 45.0 41.5 37.5 180 14 E4 R76MD 1270--3-- R76MI 3150--7-R76MI 3180--3-R76MI 3180--7-R76MI 3220--3-- Part Number R76MN3120--3-- R76MN 3150--3-R76MN 3180--3-R76MN 3220--3-R76MN 3270--3-R76MN 3330--3-R76MN 3390--3-R76MN 3470--3-R76MN 3560--3-R76MN 3680--3-R76MR 3390--3-R76MR 3470--3-R76MR 3560--3-R76MR 3680--3-R76MR 3820--3-R76MR 4100--4-R76MR 4120--4-R76MR 4150--3-R76MR 4180--3-R76MR 4220--3-R76MR 4270--3-- R76MW4100--3-R76MW4120--3-R76MW4150--3-R76MW4180--3-R76MW4220--3-R76MW4270--3-R76MW4330--3-R76MW4390--3-R76MW4470--3-- R76MW4560--3-R76MW4680--3-R76MW4820--3-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) R76MI 3270--3-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. *Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145). 09/2008 118 R76 MMKP Series polyPROPYLENE capacitor WITH DOUBLE SIDED METALLIZED FILM ELECTRODES D.C. AND PULSE APPLICATIONS PRODUCT CODE: 680 pF B 3.0 H 8.0 L 10.0 p 7.5 Max dv/dt (V/s) 2800 820 pF 3.0 8.0 10.0 7.5 2800 353 E4 1000 pF 3.0 8.0 10.0 7.5 2800 353 E4 1200 pF 3.0 8.0 10.0 7.5 2800 353 E4 1500 pF 3.0 8.0 10.0 7.5 2800 353 E4 1800 pF 3.0 8.0 10.0 7.5 2800 353 E4 2200 pF 3.0 8.0 10.0 7.5 2800 353 E4 2700 pF 4.0 9.0 10.0 7.5 2800 353 E4 3300 pF 4.0 9.0 10.0 7.5 2800 355 E4 3900 pF 4.0 9.0 10.0 7.5 2800 353 E4 4700 pF 4.0 9.0 10.0 7.5 2800 353 E4 5600 pF 4.0 9.0 10.0 7.5 2800 353 E4 6800 pF 5.0 10.5 10.0 7.5 2800 353 E4 8200 pF 5.0 10.5 10.0 7.5 2800 353 E4 0.010 F 6.0 12.0 10.5 7.5 2800 353 E4 0.012 F 6.0 12.0 10.5 7.5 2800 353 E4 Rated Cap. 630Vdc/250Vac* Std dimensions Max K0 (V2/s) 353 E4 Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) Part Number R76 double sided metallized polyester carrier film R76PD0680--0-- 1 section (630Vdc/250Vac) R76PD0820--0-R76PD1100--0-- polypropylene film dielectric R76PD1120--0-R76PD1150--0-R76PD1180--0-- R76PD1220--0-R76PD1270--4-R76PD1330--4-- R76PD1390--4-R76PD1470--4-R76PD1560--4-R76PD1680--4-R76PD1820--4-- R76PD2100--3-R76PD2120--3-- All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. *Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page145) 119 09/2008 R76 MMKP Series polyPROPYLENE capacitor WITH DOUBLE SIDED METALLIZED FILM ELECTRODES D.C. AND PULSE APPLICATIONS PRODUCT CODE: Rated Cap. 3900 4700 5600 6800 8200 0.010 0.012 0.015 0.018 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.047 0.056 0.056 0.068 0.068 0.082 0.082 0.10 0.12 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 pF pF pF pF pF F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 630Vdc / 400Vac Std dimensions B H L p 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 5.0 11.0 13.0 10.0 5.0 11.0 13.0 10.0 6.0 12.0 13.0 10.0 6.0 12.0 13.0 10.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 6.0 12.0 18.0 15.0 6.0 12.0 18.0 15.0 7.5 13.5 18.0 15.0 9.0 12.5 18.0 15.0 7.5 13.5 18.0 15.0 9.0 12.5 18.0 15.0 8.5 14.5 18.0 15.0 9.0 12.5 18.0 15.0 8.5 14.5 18.0 15.0 13.0 12.0 18.0 15.0 10.0 16.0 18.0 15.0 11.0 19.0 18.0 15.0 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 8.5 17.0 26.5 22.5 10.0 18.5 26.5 22.5 11.0 20.0 26.5 22.5 11.0 20.0 26.5 22.5 13.0 22.0 26.5 22.5 polypropylene film dielectric double sided metallized polyester carrier film 2 sections (630Vdc/400Vac) single sided metallized polypropylene film Max dv/dt (V/s) 3000 3000 3000 3000 3000 3000 3000 3000 3000 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 Max K0 (V /s) 378 E4 378 E4 378 E4 378 E4 378 E4 378 E4 378 E4 378 E4 378 E4 315 E4 315 E4 315 E4 315 E4 315 E4 315 E4 315 E4 315 E4 315 E4 315 E4 315 E4 315 E4 315 E4 315 E4 315 E4 315 E4 315 E4 189 E4 189 E4 189 E4 189 E4 189 E4 189 E4 189 E4 189 E4 189 E4 189 E4 189 E4 189 E4 Part Number Rated Cap. 2 Mechanical version and packaging (Table1) Internal use Tolerance: H (2.5%); J (5%); K (10%) 09/2008 R76 R76PF1390--0-R76PF1470--0-R76PF1560--0-R76PF1680--0-R76PF1820--0-R76PF2100--3-R76PF2120--3-R76PF2150--3-R76PF2180--3-R76PI 2120--0-R76PI 2150--0-R76PI 2180--0-R76PI 2220--3-R76PI 2270--3-R76PI 2330--3-R76PI 2390--3-R76PI 2470--3-R76PI 2470--7-R76PI 2560--3-R76PI 2560--7-R76PI 2680--3-R76PI 2680--7-R76PI 2820--3-R76PI 2820--7-R76PI 3100--3-R76PI 3120--3-R76PN 2470--0-R76PN 2560--0-R76PN 2680--0-R76PN 2820--3-R76PN 3100--3-R76PN 3120--3-R76PN 3150--3-R76PN 3180--3-R76PN 3220--3-R76PN 3270--3-R76PN 3330--3-R76PN 3390--3-- 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 630Vdc / 400Vac Std dimensions B H L p 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 11.0 20.0 32.0 27.5 11.0 20.0 32.0 27.5 13.0 22.0 32.0 27.5 13.0 22.0 32.0 27.5 13.0 25.0 32.0 27.5 14.0 28.0 32.0 27.5 18.0 33.0 32.0 27.5 18.0 33.0 32.0 27.5 22.0 37.0 32.0 27.5 22.0 37.0 32.0 27.5 11.0 22.0 41.5 37.5 11.0 22.0 41.5 37.5 11.0 22.0 41.5 37.5 11.0 22.0 41.5 37.5 11.0 22.0 41.5 37.5 13.0 24.0 41.5 37.5 16.0 28.5 41.5 37.5 16.0 28.5 41.5 37.5 16.0 28.5 41.5 37.5 19.0 32.0 41.5 37.5 20.0 40.0 41.5 37.5 20.0 40.0 41.5 37.5 24.0 44.0 41.5 37.5 30.0 45.0 41.5 37.5 30.0 45.0 41.5 37.5 30.0 45.0 41.5 37.5 Max dv/dt (V/s) 900 900 900 900 900 900 900 900 900 900 900 900 900 900 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 Max K0 Part Number (V /s) 113 E4 113 E4 113 E4 113 E4 113 E4 113 E4 113 E4 113 E4 113 E4 113 E4 113 E4 113 E4 113 E4 113 E4 56 E4 56 E4 56 E4 56 E4 56 E4 56 E4 56 E4 56 E4 56 E4 56 E4 56 E4 56 E4 56 E4 56 E4 56 E4 56 E4 R76PR 3150--3-R76PR 3180--3-R76PR 3220--3-R76PR 3270--3-R76PR 3330--4-R76PR 3390--3-R76PR 3470--3-R76PR 3560--3-R76PR 3680--4-R76PR 3820--3-R76PR 4100--3-R76PR 4120--3-R76PR 4150--3-R76PR 4180--3-R76PW3330--3-R76PW3390--3-R76PW3470--3-R76PW3560--3-R76PW3680--3-R76PW3820--3-R76PW4100--3-R76PW4120--3-R76PW4150--3-R76PW4180--3-R76PW4220--3-R76PW4270--3-R76PW4330--3-R76PW4390--3-R76PW4470--3-R76PW4560--3-- 2 Mechanical version and packaging (Table1) Internal use Tolerance: H (2.5%); J (5%); K (10%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. 120 R76 MMKP Series polyPROPYLENE capacitor WITH DOUBLE SIDED METALLIZED FILM ELECTRODES D.C. AND PULSE APPLICATIONS PRODUCT CODE: R76 220 pF B 3.0 H L 8.0 10.0 p 7.5 Max dv/dt (V/s) 6000 270 pF 3.0 8.0 10.0 7.5 6000 330 pF 3.0 8.0 10.0 7.5 6000 390 pF 3.0 8.0 10.0 7.5 6000 470 pF 3.0 8.0 10.0 7.5 6000 560 pF 3.0 8.0 10.0 7.5 6000 680 pF 4.0 9.0 10.0 7.5 6000 820 pF 4.0 9.0 10.0 7.5 6000 1000 pF 4.0 9.0 10.0 7.5 6000 1200 pF 4.0 9.0 10.0 7.5 6000 1500 pF 5.0 10.5 10.0 7.5 6000 1800 pF 5.0 10.5 10.0 7.5 6000 2200 pF 5.0 10.5 10.0 7.5 6000 2700 pF 6.0 12.0 10.5 7.5 6000 3300 pF 6.0 12.0 10.5 7.5 6000 Rated Cap. 1000Vdc / 400Vac Std dimensions Max K0 Part Number (V2/s) 1200 E4 R76QD 0220--0-1200 E4 R76QD 0270--0-- polypropylene film dielectric 2 sections (1000Vdc) 1200 E4 R76QD 0330--0-1200 E4 R76QD 0390--0-- double sided metallized polyester carrier film single sided metallized polypropylene film 1200 E4 R76QD 0470--0-1200 E4 R76QD 0560--0-1200 E4 R76QD 0680--4-1200 E4 R76QD 0820--4-1200 E4 R76QD 1100--4-1200 E4 R76QD 1120--4-1200 E4 R76QD 1150--4-1200 E4 R76QD 1180--4-1200 E4 R76QD 1220--4-1200 E4 R76QD 1270--0-1200 E4 R76QD 1330--0-- Mechanical version and packaging (Table1) Internal use Tolerance: H (2.5%)*; J (5%); K (10%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage waveform and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. * Tolerance H (+2.5%) for C 1000pF 121 09/2008 R76 MMKP Series polyPROPYLENE capacitor WITH DOUBLE SIDED METALLIZED FILM ELECTRODES D.C. AND PULSE APPLICATIONS PRODUCT CODE: R76 polypropylene film dielectric double sided metallized polyester carrier film single sided metallized polypropylene film 2 sections (1000Vdc) 470 pF B 4.0 H L p 9.0 13.0 10.0 Max dv/dt (V/s) 4800 560 pF 4.0 9.0 13.0 10.0 4800 680 pF 4.0 9.0 13.0 10.0 4800 820 pF 4.0 9.0 13.0 10.0 4800 1000 pF 4.0 9.0 13.0 10.0 4800 Rated Cap. 1000Vdc / 600Vac Std dimensions 1200 pF 4.0 9.0 13.0 10.0 4800 1500 pF 4.0 9.0 13.0 10.0 4800 1800 pF 4.0 9.0 13.0 10.0 4800 2200 pF 4.0 9.0 13.0 10.0 4800 2700 pF 4.0 9.0 13.0 10.0 4800 3300 pF 4.0 9.0 13.0 10.0 4800 3900 pF 5.0 11.0 13.0 10.0 4800 4700 pF 5.0 11.0 13.0 10.0 4800 5600 pF 6.0 12.0 13.0 10.0 4800 6800 pF 6.0 12.0 13.0 10.0 4800 8200 pF 4.0 10.0 18.0 15.0 3300 8200 pF 5.0 11.0 18.0 15.0 3300 0.010 F 4.0 10.0 18.0 15.0 3300 0.010 F 5.0 11.0 18.0 15.0 3300 0.012 F 5.0 11.0 18.0 15.0 3300 0.015 F 5.0 11.0 18.0 15.0 3300 0.018 F 5.0 11.0 18.0 15.0 3300 0.022 F 6.0 12.0 18.0 15.0 3300 0.022 F 9.0 12.5 18.0 15.0 3300 0.027 F 7.5 13.5 18.0 15.0 3300 0.027 F 9.0 12.5 18.0 15.0 3300 0.033 F 7.5 13.5 18.0 15.0 3300 0.033 F 13.0 12.0 18.0 15.0 3300 0.039 F 8.5 14.5 18.0 15.0 3300 0.047 F 8.5 14.5 18.0 15.0 3300 0.027 F 6.0 15.0 26.5 22.5 2100 0.033 F 6.0 15.0 26.5 22.5 2100 0.039 F 6.0 15.0 26.5 22.5 2100 0.047 F 7.0 16.0 26.5 22.5 2100 0.056 F 7.0 16.0 26.5 22.5 2100 0.068 F 8.5 17.0 26.5 22.5 2100 0.082 F 10.0 18.5 26.5 22.5 2100 0.10 F 10.0 18.5 26.5 22.5 2100 0.12 F 11.0 20.0 26.5 22.5 2100 0.15 F 13.0 22.0 26.5 22.5 2100 Max K0 (V /s) 960 E4 R76QF 0470--0-960 E4 R76QF 0560--0-960 E4 R76QF 0680--0-- F 9.0 17.0 32.0 27.5 1000 F 11.0 20.0 32.0 27.5 1000 0.18 F 13.0 22.0 32.0 27.5 1000 0.22 F 13.0 22.0 32.0 27.5 1000 0.27 F 13.0 25.0 32.0 27.5 1000 0.33 F 14.0 28.0 32.0 27.5 1000 0.39 F 18.0 33.0 32.0 27.5 1000 0.47 F 18.0 33.0 32.0 27.5 1000 0.56 F 22.0 37.0 32.0 27.5 1000 0.68 F 22.0 37.0 32.0 27.5 1000 0.18 F 11.0 22.0 41.5 37.5 500 0.22 F 11.0 22.0 41.5 37.5 500 0.27 F 13.0 24.0 41.5 37.5 500 0.33 F 13.0 24.0 41.5 37.5 500 0.39 F 16.0 28.5 41.5 37.5 500 0.47 F 16.0 28.5 41.5 37.5 500 0.56 F 16.0 28.5 41.5 37.5 500 0.68 F 19.0 32.0 41.5 37.5 500 0.82 F 20.0 40.0 41.5 37.5 500 1.0 F 20.0 40.0 41.5 37.5 500 1.2 F 24.0 44.0 41.5 37.5 500 1.5 F 24.0 44.0 41.5 37.5 500 1.8 F 30.0 45.0 41.5 37.5 500 2.2 F 30.0 45.0 41.5 37.5 500 2 960 E4 R76QF 0820--0-960 E4 R76QF 1100--0-960 E4 R76QF 1120--0-- 960 E4 R76QF 1150--0-960 E4 R76QF 1180--0-960 E4 R76QF 1220--0-- 960 E4 R76QF 1270--0-960 E4 R76QF 1330--3-960 E4 R76QF 1390--3-- 960 E4 R76QF 1470--3-960 E4 R76QF 1560--3-960 E4 R76QF 1680--3-- 660 E4 R76QI 1820--4-660 E4 R76QI 1820--0-660 E4 R76QI 2100--4-660 E4 R76QI 2100--3-660 E4 R76QI 2120--3-660 E4 R76QI 2150--4-660 E4 R76QI 2180--4-660 E4 R76QI 2220--4-660 E4 R76QI 2220--7-660 E4 R76QI 2270--4-660 E4 R76QI 2270--7-660 E4 R76QI 2330--4-660 E4 R76QI 2330--7-660 E4 R76QI 2390--4-660 E4 R76QI 2470--4-420 E4 R76QN 2270--0-420 E4 R76QN 2330--3-420 E4 R76QN 2390--3-420 E4 R76QN 2470--3-420 E4 R76QN 2560--3-420 E4 R76QN 2680--3-420 E4 R76QN 2820--3-- 420 E4 R76QN 3100--3-420 E4 R76QN 3120--3-420 E4 R76QN 3150--3-- Mechanical version and packaging (Table1) Internal use Tolerance: H (2.5%)*; J (5%); K (10%) 09/2008 B H L p 9.0 17.0 32.0 27.5 Max dv/dt (V/s) 1000 Rated Cap. Part Number 0.10 F 0.12 0.15 1000Vdc / 600Vac Std dimensions Max K0 Part Number (V /s) 200 E4 R76QR 3100--4-200 E4 R76QR 3120--4-200 E4 R76QR 3150--3-2 200 E4 R76QR 3180--3-200 E4 R76QR 3220--3-200 E4 R76QR 3270--4-200 E4 R76QR 3330--3-200 E4 R76QR 3390--3-200 E4 R76QR 3470--3-- 200 E4 R76QR 3560--3-200 E4 R76QR 3680--3-100 E4 R76QW 3180--3-100 E4 R76QW 3220--3-100 E4 R76QW 3270--3-100 E4 R76QW 3330--3-100 E4 R76QW 3390--3-100 E4 R76QW 3470--3-100 E4 R76QW 3560--3-100 E4 R76QW 3680--3-100 E4 R76QW 3820--3-100 E4 R76QW 4100--3-100 E4 R76QW 4120--3-100 E4 R76QW 4150--3-100 E4 R76QW 4180--3-100 E4 R76QW 4220--3-- Mechanical version and packaging (Table1) Internal use Tolerance: H (2.5%)*; J (5%); K (10%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. * Tolerance H (+2.5%) for C 1000pF 122 R76 MMKP Series polyPROPYLENE capacitor WITH DOUBLE SIDED METALLIZED FILM ELECTRODES D.C. AND PULSE APPLICATIONS PRODUCT CODE: R76 polypropylene film dielectric double sided metallized polyester carrier film single sided metallized polypropylene film 2 sections (1600Vdc) Rated Cap. 3300 3300 3900 3900 4700 4700 5600 5600 6800 8200 0.010 0.012 0.015 0.018 0.018 0.022 0.022 0.027 0.033 1600Vdc / 650Vac Std dimensions B H L pF 4.0 10.0 18.0 pF 5.0 11.0 18.0 pF 4.0 10.0 18.0 pF 5.0 11.0 18.0 pF 4.0 10.0 18.0 pF 5.0 11.0 18.0 pF 4.0 10.0 18.0 pF 5.0 11.0 18.0 pF 5.0 11.0 18.0 pF 5.0 11.0 18.0 F 5.0 11.0 18.0 F 6.0 12.0 18.0 F 6.0 12.0 18.0 F 7.5 13.5 18.0 F 9.0 12.5 18.0 F 7.5 13.5 18.0 F 13.0 12.0 18.0 F 8.5 14.5 18.0 F 8.5 14.5 18.0 p 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 Max dv/dt (V/s) 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 Max K0 (V /s) 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 1900 E4 Mechanical version and packaging (Table1) Internal use Tolerance: H (2.5%); J (5%); K (10%) Rated Cap. Part Number 2 R76TI1330--4-R76TI1330--3-R76TI1390--4-R76TI1390--3-R76TI1470--4-R76TI1470--3-R76TI1560--4-R76TI1560--3-R76TI1680--3-R76TI1820--4-R76TI2100--4-R76TI2120--4-R76TI2150--4-R76TI2180--4-R76TI2180--7-R76TI2220--4-R76TI2220--7-R76TI2270--4-R76TI2330--4-- 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 1600Vdc / 650Vac Std dimensions B 6.0 6.0 6.0 6.0 6.0 7.0 7.0 8.5 10.0 10.0 11.0 9.0 9.0 9.0 9.0 11.0 11.0 13.0 13.0 14.0 18.0 18.0 18.0 22.0 22.0 11.0 11.0 11.0 11.0 13.0 13.0 13.0 16.0 16.0 19.0 20.0 20.0 24.0 24.0 30.0 H 15.0 15.0 15.0 15.0 15.0 16.0 16.0 17.0 18.5 18.5 20.0 17.0 17.0 17.0 17.0 20.0 20.0 22.0 25.0 28.0 33.0 33.0 33.0 37.0 37.0 22.0 22.0 22.0 22.0 24.0 24.0 24.0 28.5 28.5 32.0 40.0 40.0 44.0 44.0 45.0 L 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 p 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 Max dv/dt (V/s) 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 Max K0 (V /s) 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 640 E4 640 E4 640 E4 640 E4 640 E4 640 E4 640 E4 640 E4 640 E4 640 E4 640 E4 640 E4 640 E4 640 E4 384 E4 384 E4 384 E4 384 E4 384 E4 384 E4 384 E4 384 E4 384 E4 384 E4 384 E4 384 E4 384 E4 384 E4 384 E4 Part Number 2 R76TN R76TN R76TN R76TN R76TN R76TN R76TN R76TN R76TN R76TN R76TN R76TR R76TR R76TR R76TR R76TR R76TR R76TR R76TR R76TR R76TR R76TR R76TR R76TR R76TR R76TW R76TW R76TW R76TW R76TW R76TW R76TW R76TW R76TW R76TW R76TW R76TW R76TW R76TW R76TW 2150--3-2180--3-2220--3-2270--3-2330--4-2390--4-2470--4-2560--4-2680--4-2820--4-3100--4-2390--3-2470--3-2560--3-2680--3-2820--3-3100--3-3120--3-3150--4-3180--4-3220--3-3270--3-3330--3-3390--3-3470--3-2820--3-3100--3-3120--3-3150--3-3180--3-3220--3-3270--3-3330--3-3390--3-3470--3-3560--3-3680--3-3820--3-4100--3-4120--3-- Mechanical version and packaging (Table1) Internal use Tolerance: H (2.5%); J (5%); K (10%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. 123 09/2008 R76 MMKP Series polyPROPYLENE capacitor WITH DOUBLE SIDED METALLIZED FILM ELECTRODES D.C. AND PULSE APPLICATIONS polypropylene film dielectric PRODUCT CODE: R76 double sided metallized polyester carrier film single sided metallized polypropylene film 2 sections (2000Vdc) Rated Cap. 100 120 150 180 220 220 270 270 330 330 390 390 470 470 560 560 680 680 820 820 1000 1000 1200 1200 1500 1500 1800 1800 2200 2200 2700 2700 3300 3900 4700 5600 6800 8200 0.010 0.010 0.012 0.015 pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF F F F F 2000Vdc / 700Vac Std dimensions B 4.0 4.0 4.0 4.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 5.0 5.0 5.0 6.0 6.0 6.0 7.5 13.0 8.5 8.5 H 10.0 10.0 10.0 10.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 11.0 11.0 11.0 12.0 12.0 12.0 13.5 12.0 14.5 14.5 L 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 p 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 Max dv/dt (V/s) 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 Max K0 (V2/s) 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 Mechanical version and packaging (Table1) Internal use Tolerance: H (2.5%)*; (J (5%); K (10%) All dimensions are in mm Rated Cap. Part Number R76UI 0100--4-R76UI 0120--4-R76UI 0150--4-R76UI 0180--4-R76UI 0220--4-R76UI 0220--0-R76UI 0270--4-R76UI 0270--0-R76UI 0330--4-R76UI 0330--0-R76UI 0390--4-R76UI 0390--0-R76UI 0470--4-R76UI 0470--0-R76UI 0560--4-R76UI 0560--0-R76UI 0680--4-R76UI 0680--0-R76UI 0820--4-R76UI 0820--0-R76UI 1100--4-R76UI 1100--3-R76UI 1120--4-R76UI 1120--3-R76UI 1150--4-R76UI 1150--3-R76UI 1180--4-R76UI 1180--3-R76UI 1220--4-R76UI 1220--3-R76UI 1270--4-R76UI 1270--3-R76UI 1330--4-R76UI 1390--4-R76UI 1470--4-R76UI 1560--4-R76UI 1680--4-R76UI 1820--4-R76UI 2100--4-R76UI 2100--7-R76UI 2120--4-R76UI 2150--4-- 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 pF pF pF pF pF pF pF pF pF pF pF pF F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 2000Vdc / 700Vac Std dimensions B 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 7.0 7.0 8.5 10.0 10.0 11.0 9.0 9.0 9.0 9.0 11.0 13.0 13.0 13.0 14.0 18.0 18.0 22.0 22.0 11.0 11.0 11.0 11.0 11.0 11.0 13.0 13.0 16.0 16.0 19.0 20.0 20.0 24.0 24.0 30.0 30.0 H 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 16.0 16.0 17.0 18.0 18.0 20.0 17.0 17.0 17.0 17.0 20.0 22.0 22.0 25.0 28.0 33.0 33.0 37.0 37.0 22.0 22.0 22.0 22.0 22.0 22.0 24.0 24.0 28.5 28.5 32.0 40.0 40.0 44.0 44.0 45.0 45.0 L 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 p 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 Max dv/dt (V/s) 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 2300 2300 2300 2300 2300 2300 2300 2300 2300 2300 2300 2300 2300 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 Max K0 (V2/s) 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 1400 E4 920 E4 920 E4 920 E4 920 E4 920 E4 920 E4 920 E4 920 E4 920 E4 920 E4 920 E4 920 E4 920 E4 600 E4 600 E4 600 E4 600 E4 600 E4 600 E4 600 E4 600 E4 600 E4 600 E4 600 E4 600 E4 600 E4 600 E4 600 E4 600 E4 600 E4 Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome Mechanical version and packaging (Table1) the value given in the above table. The dv/dt test is Internal use Tolerance: H (2.5%); (J (5%); K (10%) carried out at 2 times the above values. **Tolerance H (2.5%) for C 1000pF 09/2008 124 Part Number R76UN1100--0-R76UN1120--0-R76UN1150--0-R76UN1180--0-R76UN1220--0-R76UN1270--0-R76UN1330--0-R76UN1390--0-R76UN1470--0-R76UN1560--0-R76UN1680--0-R76UN1820--3-R76UN2100--3-R76UN2120--3-R76UN2150--4-R76UN2180--4-R76UN2220--4-R76UN2270--4-R76UN2330--4-R76UN2390--4-R76UN2470--4-R76UN2560--4-R76UR 2220--3-R76UR 2270--3-R76UR 2330--3-R76UR 2390--4-R76UR 2470--3-R76UR 2560--3-R76UR 2680--3-R76UR 2820--4-R76UR 3100--3-R76UR 3120--3-R76UR 3150--3-R76UR 3180--3-R76UR 3220--3-R76UW2330--3-R76UW2390--3-R76UW2470--3-R76UW2560--3-R76UW2680--3-R76UW2820--3-R76UW3100--3-R76UW3120--3-R76UW3150--3-R76UW3180--3-R76UW3220--3-R76UW3270--3-R76UW3330--3-R76UW3390--3-R76UW3470--3-R76UW3560--3-R76UW3680--3-- R76 MMKP Series polyPROPYLENE capacitor WITH DOUBLE SIDED METALLIZED FILM ELECTRODES D.C. AND PULSE APPLICATIONS PRODUCT CODE: R76 test method and performance electrical characteristics Rated voltage (VR): 250Vdc - 0400Vdc - 630Vdc 630Vdc - 1000Vdc - 1600Vdc - 2000Vdc Rated temperature (TR): +85C for VR (d.c.) +75C for VR (a.c.) for 1 section for 2 sections. Test conditions Temperature: Relative humidity (RH): Test duration: Capacitance change |C/C|: 2% DF change (tg): 10x10-4 at 1kHz Insulation resistance: 50% of initial limit. Endurance: Test conditions Temperature: Test duration: Voltage applied: 1 section 2 sections Capacitance tolerances (measured at 1 kHz): for C<1000pF 5% (J); 10% (K) 2.5% (H); 5% (J); 10% (K); for C1000pF Total self-inductance (L): (Lead length ~2 mm) Capacitance change |C/C|: 2% DF change (tg): 10x10-4 at 110kHz for C1F 10x10-4 at 111kHz for C>1F Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Pitch (mm) 7.5 10 15 22.5 27.5 37.5 L (nH) 8 9 10 18 18 20 Solder bath temperature: +260C5C Dipping time (with heat screen):10 s1 s Performance Capacitance change |C/C|: 1% DF change (tg): 10x10-4 at 110kHz for C1F 10x10-4 at 111kHz for C>1F Insulation resistance: initial limit. Dissipation factor (DF): tgx10-4 at +25C 5C 1 10 100 C0.1F 0.1F<C1.0F 030 04 15 C>1F 3 6 4 Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: Performance +85C2C 2000 h 1.25xVR (d.c.) Performance Capacitance values: E12 series (IEC 60063 Norm). kHz +40C2C 93% 2% 56 days Performance Temperature derated voltage: The following decreasing factor has to be applied on the rated voltage: +85C to +105C: 1.25% per C for VR (d.c.). +75C to +105C: 1.35% per C for VR (a.c.) Capacitance range: 680pF to 15F 100pF to 5.6F Damp heat, steady state: 1x105 M for C0.33F 30000 s for C>0.33F * Typical value. Long term stability (after two years): Storage: standard environmental conditions (see page 12). Performance Capacitance change |C/C|: 0.5% +25C5C 1 min 100Vdc (5x105 M)* (150000 s)* Test voltage between terminations: 1.6xVR applied for 2 s at +25C5C 125 09/2008 R76 MMKP Series polyPROPYLENE capacitor WITH DOUBLE SIDED METALLIZED FILM ELECTRODES D.C. AND PULSE APPLICATIONS PRODUCT CODE: R76 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) Note: p (pitch) in mm. 09/2008 126 R76 MMKP Series polyPROPYLENE capacitor WITH DOUBLE SIDED METALLIZED FILM ELECTRODES D.C. AND PULSE APPLICATIONS PRODUCT CODE: R76 MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) Note: p (pitch) in mm. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.