09/2008 116
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
Typical applications: deection circuits in TV-sets (S-
correction and y-back tuning) and monitors, switching
spikes suppression in SMPS, lamp capacitor for electronic
ballast and compact lamps, SNUBBER and SCR
commutating circuits, applications with high voltage and high
current.
PRODUCT CODE: R76
Table 1 (for more detailed information, please refer to pages 14).
Standard
packaging style
Lead length Taping style Ordering code
(mm)
P2
(mm)
Fig.
(No.)
Pitch
(mm) (Digit 10 to 11)
AMMO-PACK 06.35 1 7.5 DQ
AMMO-PACK 12.70 210.0/15.0 DQ
AMMO-PACK 19.05 3 22.5 DQ
REEL Ø 355mm 06.35 1 7.5 CK
REEL Ø 355mm 12.70 210.0/15.0 GY
REEL Ø 500mm 12.70 210.0/15.0 CK
REEL Ø 500mm 19.05 3 22.5/27.5 CK
Loose, short leads 04+2 SE
Loose, long leads
(p<10mm) 17+1/-2 Z3
Loose, long leads
(p10mm) 18+1/-1 JM
Loose, long leads
(p≥15mm)
30+5
25+2/-1
40
50
Note: Ammo-pack is the preferred packaging for taped version
Loose
Taped
Pitch Box thickness Maximum dimensions (mm)
(mm) (mm) B max H max L max
7.5 All B +0.1 H +0.1 L +0.2
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
p = 7.5 p =10 15 ≤ p ≤27.5 p = 37.5
B ≤3,5 >3,5 all all all
Ød±0.05 0.5 0.6 0.6 0.8 1.0
All dimensions are in mm.
PRODUCT CODE SYSTEM
The part number, comprising 14 digits, is formed as follows:
123456 7 8 9 10 11 12 13 14
R 7 6 -
Digit 1 to 3 Series code.
Digit 4 d.c. rated voltage:
I = 250V M = 400V P = 630V
Q = 1000V T = 1600V U = 2000V
Digit 5 Pitch:
D=7.5 mm; F=10mm; I=15mm;
N=22.5mm; R=27.5mm; W=37.5mm.
Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12 Identies the dimensions and electrical
characteristics.
Digit 13 Internal use.
Digit 14 Capacitance tolerance:
H=2.5%; J=5%; K=10%
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: double sided metallized polyester lm.
Winding: non-inductive type.
Leads: for Ø ≥ 0,6mm : tinned wire
for Ø = 0,5mm : tinned wire, low thermical conductivity
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame
retardant according to UL94 V0.
Marking: manufacturer’s logo, series (R76), dielectric
code (MKP), capacitance, tolerance, D.C. rated
voltage, manufacturing date code.
Climatic category: 55/105/56 IEC 60068-1
Operating temperature range: -55 to +105°C
Related documents: IEC 60384-16
09/2008
117
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
Rated
Cap.
250Vdc / 180Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.22 µF6.0 15.0 26.5 22.5 250 13 E4 R76IN 3220--0--
0.27 µF6.0 15.0 26.5 22.5 250 13 E4 R76IN 3270--3--
0.33 µF6.0 15.0 26.5 22.5 250 13 E4 R76IN 3330--3--
0.39 µF7.0 16.0 26.5 22.5 250 13 E4 R76IN 3390--3--
0.47 µF7.0 16.0 26.5 22.5 250 13 E4 R76IN 3470--3--
0.56 µF8.5 17.0 26.5 22.5 250 13 E4 R76IN 3560--3--
0.68 µF10.0 18.5 26.5 22.5 250 13 E4 R76IN 3680--3--
0.82 µF10.0 18.5 26.5 22.5 250 13 E4 R76IN 3820--3--
1.0 µF11.0 20.0 26.5 22.5 250 13 E4 R76IN 4100--3--
1.2 µF13.0 22.0 26.5 22.5 250 13 E4 R76IN 4120--3--
0.82 µF9.0 17.0 32.0 27.5 200 10 E4 R76IR 3820--3--
1.0 µF11.0 20.0 32.0 27.5 200 10 E4 R76IR 4100--3--
1.2 µF11.0 20.0 32.0 27.5 200 10 E4 R76IR 4120--4--
1.5 µF13.0 22.0 32.0 27.5 200 10 E4 R76IR 4150--3--
1.8 µF13.0 22.0 32.0 27.5 200 10 E4 R76IR 4180--4--
2.2 µF14.0 28.0 32.0 27.5 200 10 E4 R76IR 4220--4--
2.7 µF18.0 33.0 32.0 27.5 200 10 E4 R76IR 4270--3--
3.3 µF18.0 33.0 32.0 27.5 200 10 E4 R76IR 4330--3--
3.9 µF18.0 33.0 32.0 27.5 200 10 E4 R76IR 4390--3--
4.7 µF22.0 37.0 32.0 27.5 200 10 E4 R76IR 4470--3--
5.6 µF22.0 37.0 32.0 27.5 200 10 E4 R76IR 4560--4--
1.2 µF11.0 22.0 41.5 37.5 100 5 E4 R76IW4120--3--
1.5 µF11.0 22.0 41.5 37.5 100 5 E4 R76IW4150--3--
1.8 µF11.0 22.0 41.5 37.5 100 5 E4 R76IW4180--3--
2.2 µF13.0 24.0 41.5 37.5 100 5 E4 R76IW4220--3--
2.7 µF13.0 24.0 41.5 37.5 100 5 E4 R76IW4270--3--
3.3 µF16.0 28.5 41.5 37.5 100 5 E4 R76IW4330--3--
3.9 µF16.0 28.5 41.5 37.5 100 5 E4 R76IW4390--3--
4.7 µF19.0 32.0 41.5 37.5 100 5 E4 R76IW4470--3--
5.6 µF19.0 32.0 41.5 37.5 100 5 E4 R76IW4560--3--
6.8 µF20.0 40.0 41.5 37.5 100 5 E4 R76IW4680--3--
8.2 µF20.0 40.0 41.5 37.5 100 5 E4 R76IW4820--3--
10.0 µF24.0 44.0 41.5 37.5 100 5 E4 R76IW5100--3--
12.0 µF30.0 45.0 41.5 37.5 100 5 E4 R76IW5120--3--
15.0 µF30.0 45.0 41.5 37.5 100 5 E4 R76IW5150--3--
Rated
Cap.
250Vdc / 180Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
6800 pF 3.0 8.0 10.0 7.5 1100 55 E4 R76ID1680--3--
8200 pF 3.0 8.0 10.0 7.5 1100 55 E4 R76ID1820--3--
0.010 µF3.0 8.0 10.0 7.5 1100 55 E4 R76ID2100--3--
0.012 µF4.0 9.0 10.0 7.5 1100 55 E4 R76ID2120--4--
0.015 µF4.0 9.0 10.0 7.5 1100 55 E4 R76ID2150--4--
0.018 µF4.0 9.0 10.0 7.5 1100 55 E4 R76ID2180--4--
0.022 µF4.0 9.0 10.0 7.5 1100 55 E4 R76ID2220--4--
0.027 µF5.0 10.5 10.0 7.5 1100 55 E4 R76ID2270--4--
0.033 µF5.0 10.5 10.0 7.5 1100 55 E4 R76ID2330--4--
0.039 µF6.0 12.0 10.5 7.5 1100 55 E4 R76ID2390--3--
0.047 µF6.0 12.0 10.5 7.5 1100 55 E4 R76ID2470--3--
0.027 µF4.0 9.0 13.0 10.0 1000 50 E4 R76IF 2270--3--
0.033 µF4.0 9.0 13.0 10.0 1000 50 E4 R76IF 2330--3--
0.039 µF4.0 9.0 13.0 10.0 1000 50 E4 R76IF 2390--3--
0.047 µF5.0 11.0 13.0 10.0 1000 50 E4 R76IF 2470--3--
0.056 µF5.0 11.0 13.0 10.0 1000 50 E4 R76IF 2560--3--
0.068 µF6.0 12.0 13.0 10.0 1000 50 E4 R76IF 2680--3--
0.082 µF6.0 12.0 13.0 10.0 1000 50 E4 R76IF 2820--3--
0.068 µF5.0 11.0 18.0 15.0 550 28 E4 R76II 2680--3--
0.082 µF5.0 11.0 18.0 15.0 550 28 E4 R76II 2820--3--
0.10 µF5.0 11.0 18.0 15.0 550 28 E4 R76II 3100--3--
0.12 µF6.0 12.0 18.0 15.0 550 28 E4 R76II 3120--3--
0.15 µF6.0 12.0 18.0 15.0 550 28 E4 R76II 3150--3--
0.18 µF7.5 13.5 18.0 15.0 550 28 E4 R76II 3180--3--
0.18 µF9.0 12.5 18.0 15.0 550 28 E4 R76II 3180--7--
0.22 µF7.5 13.5 18.0 15.0 550 28 E4 R76II 3220--3--
0.22 µF9.0 12.5 18.0 15.0 550 28 E4 R76II 3220--7--
0.27 µF8.5 14.5 18.0 15.0 550 28 E4 R76II 3270--3--
0.27 µF9.0 12.5 18.0 15.0 550 28 E4 R76II 3270--7--
0.33 µF10.0 16.0 18.0 15.0 550 28 E4 R76II 3330--3--
0.33 µF13.0 12.0 18.0 15.0 550 28 E4 R76II 3330--7--
0.39 µF10.0 16.0 18.0 15.0 550 28 E4 R76II 3390--3--
0.47 µF11.0 19.0 18.0 15.0 550 28 E4 R76II 3470--3--
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the above values.
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
1 section
(250Vdc)
double sided metallized
polyester carrier lm
polypropylene lm
dielectric
09/2008 118
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
Rated
Cap.
400Vdc / 250Vac*
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.12 µF6.0 15.0 26.5 22.5 500 40 E4 R76MN3120--3--
0.15 µF6.0 15.0 26.5 22.5 500 40 E4 R76MN 3150--3--
0.18 µF6.0 15.0 26.5 22.5 500 40 E4 R76MN 3180--3--
0.22 µF7.0 16.0 26.5 22.5 500 40 E4 R76MN 3220--3--
0.27 µF8.5 17.0 26.5 22.5 500 40 E4 R76MN 3270--3--
0.33 µF8.5 17.0 26.5 22.5 500 40 E4 R76MN 3330--3--
0.39 µF10.0 18.5 26.5 22.5 500 40 E4 R76MN 3390--3--
0.47 µF10.0 18.5 26.5 22.5 500 40 E4 R76MN 3470--3--
0.56 µF11.0 20.0 26.5 22.5 500 40 E4 R76MN 3560--3--
0.68 µF13.0 22.0 26.5 22.5 500 40 E4 R76MN 3680--3--
0.39 µF9.0 17.0 32.0 27.5 300 24 E4 R76MR 3390--3--
0.47 µF9.0 17.0 32.0 27.5 300 24 E4 R76MR 3470--3--
0.56 µF11.0 20.0 32.0 27.5 300 24 E4 R76MR 3560--3--
0.68 µF11.0 20.0 32.0 27.5 300 24 E4 R76MR 3680--3--
0.82 µF13.0 22.0 32.0 27.5 300 24 E4 R76MR 3820--3--
1.0 µF13.0 22.0 32.0 27.5 300 24 E4 R76MR 4100--4--
1.2 µF14.0 28.0 32.0 27.5 300 24 E4 R76MR 4120--4--
1.5 µF18.0 33.0 32.0 27.5 300 24 E4 R76MR 4150--3--
1.8 µF18.0 33.0 32.0 27.5 300 24 E4 R76MR 4180--3--
2.2 µF22.0 37.0 32.0 27.5 300 24 E4 R76MR 4220--3--
2.7 µF22.0 37.0 32.0 27.5 300 24 E4 R76MR 4270--3--
1.0 µF11.0 22.0 41.5 37.5 180 14 E4 R76MW4100--3--
1.2 µF13.0 24.0 41.5 37.5 180 14 E4 R76MW4120--3--
1.5 µF13.0 24.0 41.5 37.5 180 14 E4 R76MW4150--3--
1.8 µF16.0 28.5 41.5 37.5 180 14 E4 R76MW4180--3--
2.2 µF19.0 32.0 41.5 37.5 180 14 E4 R76MW4220--3--
2.7 µF19.0 32.0 41.5 37.5 180 14 E4 R76MW4270--3--
3.3 µF19.0 32.0 41.5 37.5 180 14 E4 R76MW4330--3--
3.9 µF20.0 40.0 41.5 37.5 180 14 E4 R76MW4390--3--
4.7 µF20.0 40.0 41.5 37.5 180 14 E4 R76MW4470--3--
5.6 µF24.0 44.0 41.5 37.5 180 14 E4 R76MW4560--3--
6.8 µF30.0 45.0 41.5 37.5 180 14 E4 R76MW4680--3--
8.2 µF30.0 45.0 41.5 37.5 180 14 E4 R76MW4820--3--
1 section
(400Vdc)
Rated
Cap.
400Vdc / 250Vac*
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
2700 pF 3.0 8.0 10.0 7.5 1700 136 E4 R76MD 1270--3--
3300 pF 3.0 8.0 10.0 7.5 1700 136 E4 R76MD 1330--3--
3900 pF 3.0 8.0 10.0 7.5 1700 136 E4 R76MD 1390--3--
4700 pF 3.0 8.0 10.0 7.5 1700 136 E4 R76MD 1470--3--
5600 pF 3.0 8.0 10.0 7.5 1700 136 E4 R76MD 1560--3--
6800 pF 4.0 9.0 10.0 7.5 1700 136 E4 R76MD 1680--4--
8200 pF 4.0 9.0 10.0 7.5 1700 136 E4 R76MD 1820--4--
0.010 µF4.0 9.0 10.0 7.5 1700 136 E4 R76MD 2100--4--
0.012 µF4.0 9.0 10.0 7.5 1700 136 E4 R76MD 2120--4--
0.015 µF5.0 10.5 10.0 7.5 1700 136 E4 R76MD 2150--4--
0.018 µF5.0 10.5 10.0 7.5 1700 136 E4 R76MD 2180--4--
0.022 µF6.0 12.0 10.5 7.5 1700 136 E4 R76MD 2220--3--
0.027 µF6.0 12.0 10.5 7.5 1700 136 E4 R76MD 2270--3--
0.010 µF4.0 9.0 13.0 10.0 1500 120 E4 R76MF 2100--0--
0.012 µF4.0 9.0 13.0 10.0 1500 120 E4 R76MF 2120--0--
0.015 µF4.0 9.0 13.0 10.0 1500 120 E4 R76MF 2150--3--
0.018 µF4.0 9.0 13.0 10.0 1500 120 E4 R76MF 2180--3--
0.022 µF4.0 9.0 13.0 10.0 1500 120 E4 R76MF 2220--3--
0.027 µF5.0 11.0 13.0 10.0 1500 120 E4 R76MF 2270--3--
0.033 µF5.0 11.0 13.0 10.0 1500 120 E4 R76MF 2330--3--
0.039 µF6.0 12.0 13.0 10.0 1500 120 E4 R76MF 2390--3--
0.047 µF6.0 12.0 13.0 10.0 1500 120 E4 R76MF2470--3--
0.033 µF5.0 11.0 18.0 15.0 900 72 E4 R76MI 2330--0--
0.039 µF5.0 11.0 18.0 15.0 900 72 E4 R76MI 2390--3--
0.047 µF5.0 11.0 18.0 15.0 900 72 E4 R76MI 2470--3--
0.056 µF5.0 11.0 18.0 15.0 900 72 E4 R76MI 2560--3--
0.068 µF6.0 12.0 18.0 15.0 900 72 E4 R76MI 2680--3--
0.082 µF6.0 12.0 18.0 15.0 900 72 E4 R76MI 2820--3--
0.10 µF7.5 13.5 18.0 15.0 900 72 E4 R76MI 3100--3--
0.10 µF9.0 12.5 18.0 15.0 900 72 E4 R76MI 3100--7--
0.12 µF7.5 13.5 18.0 15.0 900 72 E4 R76MI 3120--3--
0.12 µF9.0 12.5 18.0 15.0 900 72 E4 R76MI 3120--7--
0.15 µF8.5 14.5 18.0 15.0 900 72 E4 R76MI 3150--3--
0.15 µF13.0 12.0 18.0 15.0 900 72 E4 R76MI 3150--7--
0.18 µF10.0 16.0 18.0 15.0 900 72 E4 R76MI 3180--3--
0.18 µF13.0 12.0 18.0 15.0 900 72 E4 R76MI 3180--7--
0.22 µF10.0 16.0 18.0 15.0 900 72 E4 R76MI 3220--3--
0.27 µF11.0 19.0 18.0 15.0 900 72 E4 R76MI 3270--3--
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the above values.
*Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145).
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
double sided metallized
polyester carrier lm
polypropylene lm
dielectric
09/2008
119
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
1 section
(630Vdc/250Vac)
double sided metallized
polyester carrier lm
polypropylene lm
dielectric
Rated
Cap.
630Vdc/250Vac*
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
680 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD0680--0--
820 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD0820--0--
1000 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD1100--0--
1200 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD1120--0--
1500 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD1150--0--
1800 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD1180--0--
2200 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD1220--0--
2700 pF 4.0 9.0 10.0 7.5 2800 353 E4 R76PD1270--4--
3300 pF 4.0 9.0 10.0 7.5 2800 355 E4 R76PD1330--4--
3900 pF 4.0 9.0 10.0 7.5 2800 353 E4 R76PD1390--4--
4700 pF 4.0 9.0 10.0 7.5 2800 353 E4 R76PD1470--4--
5600 pF 4.0 9.0 10.0 7.5 2800 353 E4 R76PD1560--4--
6800 pF 5.0 10.5 10.0 7.5 2800 353 E4 R76PD1680--4--
8200 pF 5.0 10.5 10.0 7.5 2800 353 E4 R76PD1820--4--
0.010 µF6.0 12.0 10.5 7.5 2800 353 E4 R76PD2100--3--
0.012 µF6.0 12.0 10.5 7.5 2800 353 E4 R76PD2120--3--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table. The dv/dt test is
carried out at 2 times the above values.
*Not suitable for across-the-line applications.
Please refer to Interference Suppression Capacitors (page145)
09/2008 120
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
Rated
Cap.
630Vdc / 400Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
3900 pF 4.0 9.0 13.0 10.0 3000 378 E4 R76PF1390--0--
4700 pF 4.0 9.0 13.0 10.0 3000 378 E4 R76PF1470--0--
5600 pF 4.0 9.0 13.0 10.0 3000 378 E4 R76PF1560--0--
6800 pF 4.0 9.0 13.0 10.0 3000 378 E4 R76PF1680--0--
8200 pF 4.0 9.0 13.0 10.0 3000 378 E4 R76PF1820--0--
0.010 µF5.0 11.0 13.0 10.0 3000 378 E4 R76PF2100--3--
0.012 µF5.0 11.0 13.0 10.0 3000 378 E4 R76PF2120--3--
0.015 µF6.0 12.0 13.0 10.0 3000 378 E4 R76PF2150--3--
0.018 µF6.0 12.0 13.0 10.0 3000 378 E4 R76PF2180--3--
0.012 µF5.0 11.0 18.0 15.0 2500 315 E4 R76PI 2120--0--
0.015 µF5.0 11.0 18.0 15.0 2500 315 E4 R76PI 2150--0--
0.018 µF5.0 11.0 18.0 15.0 2500 315 E4 R76PI 2180--0--
0.022 µF5.0 11.0 18.0 15.0 2500 315 E4 R76PI 2220--3--
0.027 µF5.0 11.0 18.0 15.0 2500 315 E4 R76PI 2270--3--
0.033 µF6.0 12.0 18.0 15.0 2500 315 E4 R76PI 2330--3--
0.039 µF6.0 12.0 18.0 15.0 2500 315 E4 R76PI 2390--3--
0.047 µF7.5 13.5 18.0 15.0 2500 315 E4 R76PI 2470--3--
0.047 µF9.0 12.5 18.0 15.0 2500 315 E4 R76PI 2470--7--
0.056 µF7.5 13.5 18.0 15.0 2500 315 E4 R76PI 2560--3--
0.056 µF9.0 12.5 18.0 15.0 2500 315 E4 R76PI 2560--7--
0.068 µF8.5 14.5 18.0 15.0 2500 315 E4 R76PI 2680--3--
0.068 µF9.0 12.5 18.0 15.0 2500 315 E4 R76PI 2680--7--
0.082 µF8.5 14.5 18.0 15.0 2500 315 E4 R76PI 2820--3--
0.082 µF13.0 12.0 18.0 15.0 2500 315 E4 R76PI 2820--7--
0.10 µF10.0 16.0 18.0 15.0 2500 315 E4 R76PI 3100--3--
0.12 µF11.0 19.0 18.0 15.0 2500 315 E4 R76PI 3120--3--
0.047 µF6.0 15.0 26.5 22.5 1500 189 E4 R76PN 2470--0--
0.056 µF6.0 15.0 26.5 22.5 1500 189 E4 R76PN 2560--0--
0.068 µF6.0 15.0 26.5 22.5 1500 189 E4 R76PN 2680--0--
0.082 µF6.0 15.0 26.5 22.5 1500 189 E4 R76PN 2820--3--
0.10 µF6.0 15.0 26.5 22.5 1500 189 E4 R76PN 3100--3--
0.12 µF7.0 16.0 26.5 22.5 1500 189 E4 R76PN 3120--3--
0.15 µF8.5 17.0 26.5 22.5 1500 189 E4 R76PN 3150--3--
0.18 µF8.5 17.0 26.5 22.5 1500 189 E4 R76PN 3180--3--
0.22 µF10.0 18.5 26.5 22.5 1500 189 E4 R76PN 3220--3--
0.27 µF11.0 20.0 26.5 22.5 1500 189 E4 R76PN 3270--3--
0.33 µF11.0 20.0 26.5 22.5 1500 189 E4 R76PN 3330--3--
0.39 µF13.0 22.0 26.5 22.5 1500 189 E4 R76PN 3390--3--
Rated
Cap.
630Vdc / 400Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
0.15 µF9.0 17.0 32.0 27.5 900 113 E4 R76PR 3150--3--
0.18 µF9.0 17.0 32.0 27.5 900 113 E4 R76PR 3180--3--
0.22 µF9.0 17.0 32.0 27.5 900 113 E4 R76PR 3220--3--
0.27 µF9.0 17.0 32.0 27.5 900 113 E4 R76PR 3270--3--
0.33 µF11.0 20.0 32.0 27.5 900 113 E4 R76PR 3330--4--
0.39 µF11.0 20.0 32.0 27.5 900 113 E4 R76PR 3390--3--
0.47 µF13.0 22.0 32.0 27.5 900 113 E4 R76PR 3470--3--
0.56 µF13.0 22.0 32.0 27.5 900 113 E4 R76PR 3560--3--
0.68 µF13.0 25.0 32.0 27.5 900 113 E4 R76PR 3680--4--
0.82 µF14.0 28.0 32.0 27.5 900 113 E4 R76PR 3820--3--
1.0 µF18.0 33.0 32.0 27.5 900 113 E4 R76PR 4100--3--
1.2 µF18.0 33.0 32.0 27.5 900 113 E4 R76PR 4120--3--
1.5 µF22.0 37.0 32.0 27.5 900 113 E4 R76PR 4150--3--
1.8 µF22.0 37.0 32.0 27.5 900 113 E4 R76PR 4180--3--
0.33 µF11.0 22.0 41.5 37.5 450 56 E4 R76PW3330--3--
0.39 µF11.0 22.0 41.5 37.5 450 56 E4 R76PW3390--3--
0.47 µF11.0 22.0 41.5 37.5 450 56 E4 R76PW3470--3--
0.56 µF11.0 22.0 41.5 37.5 450 56 E4 R76PW3560--3--
0.68 µF11.0 22.0 41.5 37.5 450 56 E4 R76PW3680--3--
0.82 µF13.0 24.0 41.5 37.5 450 56 E4 R76PW3820--3--
1.0 µF16.0 28.5 41.5 37.5 450 56 E4 R76PW4100--3--
1.2 µF16.0 28.5 41.5 37.5 450 56 E4 R76PW4120--3--
1.5 µF16.0 28.5 41.5 37.5 450 56 E4 R76PW4150--3--
1.8 µF19.0 32.0 41.5 37.5 450 56 E4 R76PW4180--3--
2.2 µF20.0 40.0 41.5 37.5 450 56 E4 R76PW4220--3--
2.7 µF20.0 40.0 41.5 37.5 450 56 E4 R76PW4270--3--
3.3 µF24.0 44.0 41.5 37.5 450 56 E4 R76PW4330--3--
3.9 µF30.0 45.0 41.5 37.5 450 56 E4 R76PW4390--3--
4.7 µF30.0 45.0 41.5 37.5 450 56 E4 R76PW4470--3--
5.6 µF30.0 45.0 41.5 37.5 450 56 E4 R76PW4560--3--
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table. The dv/dt test is
carried out at 2 times the above values.
2 sections
(630Vdc/400Vac)
double sided metallized
polyester carrier lm
polypropylene lm
dielectric
single sided metallized
polypropylene lm
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%); J (±5%); K (±10%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%); J (±5%); K (±10%)
09/2008
121
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
2 sections
(1000Vdc)
double sided metallized
polyester carrier lm
polypropylene lm
dielectric
single sided metallized
polypropylene lm
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage
(VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above
value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-
form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the
above values.
* Tolerance H (+2.5%) for C ≥1000pF
Rated
Cap.
1000Vdc / 400Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
220 pF 3.0 8.0 10.0 7.5 6000 1200 E4 R76QD 0220--0--
270 pF 3.0 8.0 10.0 7.5 6000 1200 E4 R76QD 0270--0--
330 pF 3.0 8.0 10.0 7.5 6000 1200 E4 R76QD 0330--0--
390 pF 3.0 8.0 10.0 7.5 6000 1200 E4 R76QD 0390--0--
470 pF 3.0 8.0 10.0 7.5 6000 1200 E4 R76QD 0470--0--
560 pF 3.0 8.0 10.0 7.5 6000 1200 E4 R76QD 0560--0--
680 pF 4.0 9.0 10.0 7.5 6000 1200 E4 R76QD 0680--4--
820 pF 4.0 9.0 10.0 7.5 6000 1200 E4 R76QD 0820--4--
1000 pF 4.0 9.0 10.0 7.5 6000 1200 E4 R76QD 1100--4--
1200 pF 4.0 9.0 10.0 7.5 6000 1200 E4 R76QD 1120--4--
1500 pF 5.0 10.5 10.0 7.5 6000 1200 E4 R76QD 1150--4--
1800 pF 5.0 10.5 10.0 7.5 6000 1200 E4 R76QD 1180--4--
2200 pF 5.0 10.5 10.0 7.5 6000 1200 E4 R76QD 1220--4--
2700 pF 6.0 12.0 10.5 7.5 6000 1200 E4 R76QD 1270--0--
3300 pF 6.0 12.0 10.5 7.5 6000 1200 E4 R76QD 1330--0--
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%)*; J (±5%); K (±10%)
09/2008 122
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
Rated
Cap.
1000Vdc / 600Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
470 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 0470--0--
560 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 0560--0--
680 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 0680--0--
820 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 0820--0--
1000 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1100--0--
1200 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1120--0--
1500 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1150--0--
1800 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1180--0--
2200 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1220--0--
2700 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1270--0--
3300 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1330--3--
3900 pF 5.0 11.0 13.0 10.0 4800 960 E4 R76QF 1390--3--
4700 pF 5.0 11.0 13.0 10.0 4800 960 E4 R76QF 1470--3--
5600 pF 6.0 12.0 13.0 10.0 4800 960 E4 R76QF 1560--3--
6800 pF 6.0 12.0 13.0 10.0 4800 960 E4 R76QF 1680--3--
8200 pF 4.0 10.0 18.0 15.0 3300 660 E4 R76QI 1820--4--
8200 pF 5.0 11.0 18.0 15.0 3300 660 E4 R76QI 1820--0--
0.010 µF4.0 10.0 18.0 15.0 3300 660 E4 R76QI 2100--4--
0.010 µF5.0 11.0 18.0 15.0 3300 660 E4 R76QI 2100--3--
0.012 µF5.0 11.0 18.0 15.0 3300 660 E4 R76QI 2120--3--
0.015 µF5.0 11.0 18.0 15.0 3300 660 E4 R76QI 2150--4--
0.018 µF5.0 11.0 18.0 15.0 3300 660 E4 R76QI 2180--4--
0.022 µF6.0 12.0 18.0 15.0 3300 660 E4 R76QI 2220--4--
0.022 µF9.0 12.5 18.0 15.0 3300 660 E4 R76QI 2220--7--
0.027 µF7.5 13.5 18.0 15.0 3300 660 E4 R76QI 2270--4--
0.027 µF9.0 12.5 18.0 15.0 3300 660 E4 R76QI 2270--7--
0.033 µF7.5 13.5 18.0 15.0 3300 660 E4 R76QI 2330--4--
0.033 µF13.0 12.0 18.0 15.0 3300 660 E4 R76QI 2330--7--
0.039 µF8.5 14.5 18.0 15.0 3300 660 E4 R76QI 2390--4--
0.047 µF8.5 14.5 18.0 15.0 3300 660 E4 R76QI 2470--4--
0.027 µF6.0 15.0 26.5 22.5 2100 420 E4 R76QN 2270--0--
0.033 µF6.0 15.0 26.5 22.5 2100 420 E4 R76QN 2330--3--
0.039 µF6.0 15.0 26.5 22.5 2100 420 E4 R76QN 2390--3--
0.047 µF7.0 16.0 26.5 22.5 2100 420 E4 R76QN 2470--3--
0.056 µF7.0 16.0 26.5 22.5 2100 420 E4 R76QN 2560--3--
0.068 µF8.5 17.0 26.5 22.5 2100 420 E4 R76QN 2680--3--
0.082 µF10.0 18.5 26.5 22.5 2100 420 E4 R76QN 2820--3--
0.10 µF10.0 18.5 26.5 22.5 2100 420 E4 R76QN 3100--3--
0.12 µF11.0 20.0 26.5 22.5 2100 420 E4 R76QN 3120--3--
0.15 µF13.0 22.0 26.5 22.5 2100 420 E4 R76QN 3150--3--
2 sections
(1000Vdc)
double sided metallized
polyester carrier lm
polypropylene lm
dielectric
single sided metallized
polypropylene lm
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%)*; J (±5%); K (±10%)
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table. The dv/dt test is
carried out at 2 times the above values.
* Tolerance H (+2.5%) for C ≥1000pF
Rated
Cap.
1000Vdc / 600Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.10 µF9.0 17.0 32.0 27.5 1000 200 E4 R76QR 3100--4--
0.12 µF9.0 17.0 32.0 27.5 1000 200 E4 R76QR 3120--4--
0.15 µF11.0 20.0 32.0 27.5 1000 200 E4 R76QR 3150--3--
0.18 µF13.0 22.0 32.0 27.5 1000 200 E4 R76QR 3180--3--
0.22 µF13.0 22.0 32.0 27.5 1000 200 E4 R76QR 3220--3--
0.27 µF13.0 25.0 32.0 27.5 1000 200 E4 R76QR 3270--4--
0.33 µF14.0 28.0 32.0 27.5 1000 200 E4 R76QR 3330--3--
0.39 µF18.0 33.0 32.0 27.5 1000 200 E4 R76QR 3390--3--
0.47 µF18.0 33.0 32.0 27.5 1000 200 E4 R76QR 3470--3--
0.56 µF22.0 37.0 32.0 27.5 1000 200 E4 R76QR 3560--3--
0.68 µF22.0 37.0 32.0 27.5 1000 200 E4 R76QR 3680--3--
0.18 µF11.0 22.0 41.5 37.5 500 100 E4 R76QW 3180--3--
0.22 µF11.0 22.0 41.5 37.5 500 100 E4 R76QW 3220--3--
0.27 µF13.0 24.0 41.5 37.5 500 100 E4 R76QW 3270--3--
0.33 µF13.0 24.0 41.5 37.5 500 100 E4 R76QW 3330--3--
0.39 µF16.0 28.5 41.5 37.5 500 100 E4 R76QW 3390--3--
0.47 µF16.0 28.5 41.5 37.5 500 100 E4 R76QW 3470--3--
0.56 µF16.0 28.5 41.5 37.5 500 100 E4 R76QW 3560--3--
0.68 µF19.0 32.0 41.5 37.5 500 100 E4 R76QW 3680--3--
0.82 µF20.0 40.0 41.5 37.5 500 100 E4 R76QW 3820--3--
1.0 µF20.0 40.0 41.5 37.5 500 100 E4 R76QW 4100--3--
1.2 µF24.0 44.0 41.5 37.5 500 100 E4 R76QW 4120--3--
1.5 µF24.0 44.0 41.5 37.5 500 100 E4 R76QW 4150--3--
1.8 µF30.0 45.0 41.5 37.5 500 100 E4 R76QW 4180--3--
2.2 µF30.0 45.0 41.5 37.5 500 100 E4 R76QW 4220--3--
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%)*; J (±5%); K (±10%)
09/2008
123
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
Rated
Cap.
1600Vdc / 650Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.015 µF6.0 15.0 26.5 22.5 3000 960 E4 R76TN 2150--3--
0.018 µF6.0 15.0 26.5 22.5 3000 960 E4 R76TN 2180--3--
0.022 µF6.0 15.0 26.5 22.5 3000 960 E4 R76TN 2220--3--
0.027 µF6.0 15.0 26.5 22.5 3000 960 E4 R76TN 2270--3--
0.033 µF6.0 15.0 26.5 22.5 3000 960 E4 R76TN 2330--4--
0.039 µF7.0 16.0 26.5 22.5 3000 960 E4 R76TN 2390--4--
0.047 µF7.0 16.0 26.5 22.5 3000 960 E4 R76TN 2470--4--
0.056 µF8.5 17.0 26.5 22.5 3000 960 E4 R76TN 2560--4--
0.068 µF10.0 18.5 26.5 22.5 3000 960 E4 R76TN 2680--4--
0.082 µF10.0 18.5 26.5 22.5 3000 960 E4 R76TN 2820--4--
0.10 µF11.0 20.0 26.5 22.5 3000 960 E4 R76TN 3100--4--
0.039 µF9.0 17.0 32.0 27.5 2000 640 E4 R76TR 2390--3--
0.047 µF9.0 17.0 32.0 27.5 2000 640 E4 R76TR 2470--3--
0.056 µF9.0 17.0 32.0 27.5 2000 640 E4 R76TR 2560--3--
0.068 µF9.0 17.0 32.0 27.5 2000 640 E4 R76TR 2680--3--
0.082 µF11.0 20.0 32.0 27.5 2000 640 E4 R76TR 2820--3--
0.10 µF11.0 20.0 32.0 27.5 2000 640 E4 R76TR 3100--3--
0.12 µF13.0 22.0 32.0 27.5 2000 640 E4 R76TR 3120--3--
0.15 µF13.0 25.0 32.0 27.5 2000 640 E4 R76TR 3150--4--
0.18 µF14.0 28.0 32.0 27.5 2000 640 E4 R76TR 3180--4--
0.22 µF18.0 33.0 32.0 27.5 2000 640 E4 R76TR 3220--3--
0.27 µF18.0 33.0 32.0 27.5 2000 640 E4 R76TR 3270--3--
0.33 µF18.0 33.0 32.0 27.5 2000 640 E4 R76TR 3330--3--
0.39 µF22.0 37.0 32.0 27.5 2000 640 E4 R76TR 3390--3--
0.47 µF22.0 37.0 32.0 27.5 2000 640 E4 R76TR 3470--3--
0.082 µF11.0 22.0 41.5 37.5 1200 384 E4 R76TW 2820--3--
0.10 µF11.0 22.0 41.5 37.5 1200 384 E4 R76TW 3100--3--
0.12 µF11.0 22.0 41.5 37.5 1200 384 E4 R76TW 3120--3--
0.15 µF11.0 22.0 41.5 37.5 1200 384 E4 R76TW 3150--3--
0.18 µF13.0 24.0 41.5 37.5 1200 384 E4 R76TW 3180--3--
0.22 µF13.0 24.0 41.5 37.5 1200 384 E4 R76TW 3220--3--
0.27 µF13.0 24.0 41.5 37.5 1200 384 E4 R76TW 3270--3--
0.33 µF16.0 28.5 41.5 37.5 1200 384 E4 R76TW 3330--3--
0.39 µF16.0 28.5 41.5 37.5 1200 384 E4 R76TW 3390--3--
0.47 µF19.0 32.0 41.5 37.5 1200 384 E4 R76TW 3470--3--
0.56 µF20.0 40.0 41.5 37.5 1200 384 E4 R76TW 3560--3--
0.68 µF20.0 40.0 41.5 37.5 1200 384 E4 R76TW 3680--3--
0.82 µF24.0 44.0 41.5 37.5 1200 384 E4 R76TW 3820--3--
1.0 µF24.0 44.0 41.5 37.5 1200 384 E4 R76TW 4100--3--
1.2 µF30.0 45.0 41.5 37.5 1200 384 E4 R76TW 4120--3--
Rated
Cap.
1600Vdc / 650Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
3300 pF 4.0 10.0 18.0 15.0 6000 1900 E4 R76TI1330--4--
3300 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R76TI1330--3--
3900 pF 4.0 10.0 18.0 15.0 6000 1900 E4 R76TI1390--4--
3900 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R76TI1390--3--
4700 pF 4.0 10.0 18.0 15.0 6000 1900 E4 R76TI1470--4--
4700 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R76TI1470--3--
5600 pF 4.0 10.0 18.0 15.0 6000 1900 E4 R76TI1560--4--
5600 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R76TI1560--3--
6800 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R76TI1680--3--
8200 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R76TI1820--4--
0.010 µF5.0 11.0 18.0 15.0 6000 1900 E4 R76TI2100--4--
0.012 µF6.0 12.0 18.0 15.0 6000 1900 E4 R76TI2120--4--
0.015 µF6.0 12.0 18.0 15.0 6000 1900 E4 R76TI2150--4--
0.018 µF7.5 13.5 18.0 15.0 6000 1900 E4 R76TI2180--4--
0.018 µF9.0 12.5 18.0 15.0 6000 1900 E4 R76TI2180--7--
0.022 µF7.5 13.5 18.0 15.0 6000 1900 E4 R76TI2220--4--
0.022 µF13.0 12.0 18.0 15.0 6000 1900 E4 R76TI2220--7--
0.027 µF8.5 14.5 18.0 15.0 6000 1900 E4 R76TI2270--4--
0.033 µF8.5 14.5 18.0 15.0 6000 1900 E4 R76TI2330--4--
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this
case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse
characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table.
The dv/dt test is carried out at 2 times the above values.
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%); J (±5%); K (±10%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%); J (±5%); K (±10%)
2 sections
(1600Vdc)
double sided metallized
polyester carrier lm
polypropylene lm
dielectric
single sided metallized
polypropylene lm
09/2008 124
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
Rated
Cap.
2000Vdc / 700Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
1000 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1100--0--
1200 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1120--0--
1500 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1150--0--
1800 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1180--0--
2200 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1220--0--
2700 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1270--0--
3300 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1330--0--
3900 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1390--0--
4700 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1470--0--
5600 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1560--0--
6800 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1680--0--
8200 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1820--3--
0.010 µF6.0 15.0 26.5 22.5 3500 1400 E4 R76UN2100--3--
0.012 µF6.0 15.0 26.5 22.5 3500 1400 E4 R76UN2120--3--
0.015 µF6.0 15.0 26.5 22.5 3500 1400 E4 R76UN2150--4--
0.018 µF6.0 15.0 26.5 22.5 3500 1400 E4 R76UN2180--4--
0.022 µF7.0 16.0 26.5 22.5 3500 1400 E4 R76UN2220--4--
0.027 µF7.0 16.0 26.5 22.5 3500 1400 E4 R76UN2270--4--
0.033 µF8.5 17.0 26.5 22.5 3500 1400 E4 R76UN2330--4--
0.039 µF10.0 18.0 26.5 22.5 3500 1400 E4 R76UN2390--4--
0.047 µF10.0 18.0 26.5 22.5 3500 1400 E4 R76UN2470--4--
0.056 µF11.0 20.0 26.5 22.5 3500 1400 E4 R76UN2560--4--
0.022 µF9.0 17.0 32.0 27.5 2300 920 E4 R76UR 2220--3--
0.027 µF9.0 17.0 32.0 27.5 2300 920 E4 R76UR 2270--3--
0.033 µF9.0 17.0 32.0 27.5 2300 920 E4 R76UR 2330--3--
0.039 µF9.0 17.0 32.0 27.5 2300 920 E4 R76UR 2390--4--
0.047 µF11.0 20.0 32.0 27.5 2300 920 E4 R76UR 2470--3--
0.056 µF13.0 22.0 32.0 27.5 2300 920 E4 R76UR 2560--3--
0.068 µF13.0 22.0 32.0 27.5 2300 920 E4 R76UR 2680--3--
0.082 µF13.0 25.0 32.0 27.5 2300 920 E4 R76UR 2820--4--
0.10 µF14.0 28.0 32.0 27.5 2300 920 E4 R76UR 3100--3--
0.12 µF18.0 33.0 32.0 27.5 2300 920 E4 R76UR 3120--3--
0.15 µF18.0 33.0 32.0 27.5 2300 920 E4 R76UR 3150--3--
0.18 µF22.0 37.0 32.0 27.5 2300 920 E4 R76UR 3180--3--
0.22 µF22.0 37.0 32.0 27.5 2300 920 E4 R76UR 3220--3--
0.033 µF11.0 22.0 41.5 37.5 1500 600 E4 R76UW2330--3--
0.039 µF11.0 22.0 41.5 37.5 1500 600 E4 R76UW2390--3--
0.047 µF11.0 22.0 41.5 37.5 1500 600 E4 R76UW2470--3--
0.056 µF11.0 22.0 41.5 37.5 1500 600 E4 R76UW2560--3--
0.068 µF11.0 22.0 41.5 37.5 1500 600 E4 R76UW2680--3--
0.082 µF11.0 22.0 41.5 37.5 1500 600 E4 R76UW2820--3--
0.10 µF13.0 24.0 41.5 37.5 1500 600 E4 R76UW3100--3--
0.12 µF13.0 24.0 41.5 37.5 1500 600 E4 R76UW3120--3--
0.15 µF16.0 28.5 41.5 37.5 1500 600 E4 R76UW3150--3--
0.18 µF16.0 28.5 41.5 37.5 1500 600 E4 R76UW3180--3--
0.22 µF19.0 32.0 41.5 37.5 1500 600 E4 R76UW3220--3--
0.27 µF20.0 40.0 41.5 37.5 1500 600 E4 R76UW3270--3--
0.33 µF20.0 40.0 41.5 37.5 1500 600 E4 R76UW3330--3--
0.39 µF24.0 44.0 41.5 37.5 1500 600 E4 R76UW3390--3--
0.47 µF24.0 44.0 41.5 37.5 1500 600 E4 R76UW3470--3--
0.56 µF30.0 45.0 41.5 37.5 1500 600 E4 R76UW3560--3--
0.68 µF30.0 45.0 41.5 37.5 1500 600 E4 R76UW3680--3--
Rated
Cap.
2000Vdc / 700Vac
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
100 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0100--4--
120 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0120--4--
150 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0150--4--
180 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0180--4--
220 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0220--4--
220 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0220--0--
270 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0270--4--
270 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0270--0--
330 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0330--4--
330 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0330--0--
390 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0390--4--
390 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0390--0--
470 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0470--4--
470 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0470--0--
560 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0560--4--
560 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0560--0--
680 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0680--4--
680 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0680--0--
820 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0820--4--
820 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0820--0--
1000 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 1100--4--
1000 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1100--3--
1200 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 1120--4--
1200 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1120--3--
1500 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 1150--4--
1500 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1150--3--
1800 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 1180--4--
1800 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1180--3--
2200 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 1220--4--
2200 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1220--3--
2700 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 1270--4--
2700 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1270--3--
3300 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1330--4--
3900 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1390--4--
4700 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1470--4--
5600 pF 6.0 12.0 18.0 15.0 9500 3800 E4 R76UI 1560--4--
6800 pF 6.0 12.0 18.0 15.0 9500 3800 E4 R76UI 1680--4--
8200 pF 6.0 12.0 18.0 15.0 9500 3800 E4 R76UI 1820--4--
0.010 µF7.5 13.5 18.0 15.0 9500 3800 E4 R76UI 2100--4--
0.010 µF13.0 12.0 18.0 15.0 9500 3800 E4 R76UI 2100--7--
0.012 µF8.5 14.5 18.0 15.0 9500 3800 E4 R76UI 2120--4--
0.015 µF8.5 14.5 18.0 15.0 9500 3800 E4 R76UI 2150--4--
All dimensions are in mm
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V. The pulse characteristic K0 depends on the
voltage wave-form and in any case it cannot overcome
the value given in the above table. The dv/dt test is
carried out at 2 times the above values.
**Tolerance H (±2.5%) for C ≥1000pF
2 sections
(2000Vdc)
double sided metallized
polyester carrier lm
polypropylene lm
dielectric
single sided metallized
polypropylene lm
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%)*; (J (±5%); K (±10%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%); (J (±5%); K (±10%)
09/2008
125
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤10x10-4 at 1kHz
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: +85°C±2°C
Test duration: 2000 h
Voltage applied: 1.25xVR (d.c.)
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤10x10-4 at 110kHz for C≤1µF
≤10x10-4 at 111kHz for C>1µF
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change |∆C/C|: ≤1%
DF change (∆tgδ): ≤10x10-4 at 110kHz for C≤1µF
≤10x10-4 at 111kHz for C>1µF
Insulation resistance: ≥initial limit.
Long term stability (after two years):
Storage: standard environmental conditions (see page 12).
Performance
Capacitance change |∆C/C|: ≤0.5%
ELECTRICAL CHARACTERISTICS
Rated voltage (VR):
250Vdc - 0400Vdc - 630Vdc for 1 section
630Vdc - 1000Vdc - 1600Vdc - 2000Vdc for 2 sections.
Rated temperature (TR):
+85°C for VR (d.c.)
+75°C for VR (a.c.)
Temperature derated voltage:
The following decreasing factor has to be applied on the
rated voltage:
+85°C to +105°C: 1.25% per °C for VR (d.c.).
+75°C to +105°C: 1.35% per °C for VR (a.c.)
Capacitance range:
680pF to 15µF 1 section
100pF to 5.6µF 2 sections
Capacitance values:
E12 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±5% (J); ±10% (K) for C<1000pF
±2.5% (H); ±5% (J); ±10% (K); for C≥1000pF
Total self-inductance (L):
(Lead length ~2 mm)
Pitch (mm) 7.5 10 15 22.5 27.5 37.5
L (nH) ≈ 8 9 10 18 18 20
Dissipation factor (DF):
tgδx10-4 at +25°C ±5°C
kHz C≤0.1µF0.1µF<C≤1.0µFC>1µF
1
10
100
≤030
≤04
≤15
≤3
≤6
≤4
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100Vdc
Performance
≥1x105 MΩ for C≤0.33µF (5x105 MΩ)*
≥30000 s for C>0.33µF (150000 s)*
* Typical value.
Test voltage between terminations:
1.6xVR applied for 2 s at +25°C±5°C
09/2008 126
Note: p (pitch) in mm.
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)
MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)
R76
MMKP Series
POLYPROPYLENE CAPACITOR WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
Note: p (pitch) in mm.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.