CPF
www.vishay.com Vishay Dale
Revision: 19-Nov-12 1Document Number: 31021
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Metal Film Resistors, Industrial Power, Precision, Flameproof
FEATURES
High power rating, small size
Flameproof, high temperature coating
Special filming and coating processes
Excellent high frequency characteristics
•Low noise
Low voltage coefficient
Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
Note
*Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
Note
(1) Continuous working voltage shall be or maximum working voltage, whichever is less.
Note
(2) Rated voltage
Note
For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544).
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
POWER
RATING
P70 °C
W
MAXIMUM
WORKING
VOLTAGE
(1)
V
RESISTANCE RANGE
0.1 %
to
1 % 0.1 %
to
5 % 0.5 %
to
5 % 1 %
to
5 % 1 % 2 %
to
5 %
± 25
ppm
/°C ± 50
ppm
/°C ± 100
ppm
/°C ± 150
ppm
/°C ± 200
ppm
/°C ± 200
ppm
/°C
CPF1 CPF-1 1 250 5 to 150K 5 to 150K 1 to 150K 0.5 to 150K 0.5 to 150K 0.1 to 150K
CPF2 CPF-2 2 350 5 to 150K 5 to 150K 1 to 150K 0.5 to 150K 0.5 to 150K 0.1 to 150K
CPF3 CPF-3 3 500 8 to 150K 8 to 150K 1 to 150K 1 to 150K 1 to 150K 0.1 to 150K
TEMPERATURE COEFFICIENT CODES
GLOBAL TC CODE HISTORICAL TC CODE TEMPERATURE COEFFICIENT
E T-9 25 ppm/°C
H T-2 50 ppm/°C
K T-1 100 ppm/°C
L T-0 150 ppm/°C
N T-00 200 ppm/°C
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CPF1 CPF2 CPF3
Rated Dissipation at 70 °C W 1 2 3
Limiting Element Voltage (2) V250 350 500
Insulation Voltage Veff 900 900 900
Thermal Resistance K/W 85 60 50
Insulation Resistance 1010
Category Temperature Range °C - 65 °C/+ 230 °C
GLOBAL PART NUMBER INFORMATION
P x R
P x R
GLOBAL MODEL TOLERANCE
CODE
CPF1 B = ± 0.1 % E = 25 ppm E14 = Lead (Pb)-free, bulk
E36 = Lead(Pb)-free, T/R (full)
EE6 = Lead (Pb)-free,
T/R (1000 pieces)
B14 = Tin/lead, bulk
R36 = Tin/lead, T/R (full)
RE6 = Tin/lead, T/R (1000 pieces)
CPF2
R = Ω
K = kΩ
R10000 = 0.1 Ω
10R000 = 10 Ω
150K00 = 150 kΩ
C = ± 0.25 % H = 50 ppm
CPF3 D = ± 0.5 % K = 100 ppm
F = ± 1 % L = 150 ppm
1 to 999
G = ± 2 % N = 200 ppm
J = ± 5 %
New Global Part Numbering: CPF1562R00FKR36 (preferred part numbering format)
CPF1562R00FKR36
Historical Part Number example: CPF-15620FT-1 R36 (will continue to be accepted)
63R1-TF02651-FPC
HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING
Blank = Standard
(Up to 3 digits)
SPECIAL
(Dash Number)
From
as applicable
PACKAGING
RESISTANCE VALUE TEMPERATURE
COEFFICIENT
CPF
www.vishay.com Vishay Dale
Revision: 19-Nov-12 2Document Number: 31021
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS
Notes
(1) Lead length for product in bulk pack. For product supplied in
tape and reel, the actual lead length would be based on the body
size, tape spacing and lead trim.
Surface temperatures were taken with an infrared pyrometer in
+ 25 °C still air. Resistors were supported by their leads in test
clips at a point 0.500" (12.70 mm) out from the resistor body ends.
L1 max.
LD
1.50 ± 0.125 (1)
[38.10 ± 3.18]
d
GLOBAL
MODEL
DIMENSIONS in inches (millimeters)
LDL
1 max. d
CPF1 0.240 ± 0.020
(6.10 ± 0.51)
0.090 ± 0.008
(2.29 ± 0.20)
0.310
(7.87)
0.025 ± 0.002
(0.64 ± 0.05)
CPF2 0.344 ± 0.031
(8.74 ± 0.79)
0.145 ± 0.015
(3.68 ± 0.38)
0.425
(10.80)
0.032 ± 0.002
(0.81 ± 0.05)
CPF3 0.555 ± 0.041
(14.10 ± 1.04)
0.180 ± 0.015
(4.57 ± 0.381)
0.650
(16.51)
0.032 ± 0.002
(0.81 ± 0.05)
DERATING
% RATED POWER
HEAT RISE (°C ABOVE AMBIENT)
250
200
150
100
50
0
THERMAL RESISTANCE
01 2345
APPLIED POWER IN W
120
100
80
60
40
20
0
- 55 - 25 0 30 60 90 120 150 180 210 240
AMBIENT TEMP. IN °C
70
CPF1 CPF2 CPF3
MATERIAL SPECIFICATIONS
Element Proprietary nickel-chrome alloy
Core Cleaned high purity ceramic
Coating Special high temperature conformal coat
Termination
Standard lead material is solder-coated
Solderable and weldable per
MIL-STD-1276, Type C
MECHANICAL SPECIFICATIONS
Terminal strength 2 pound pull test
Solderability
Continuous satisfactory coverage
when tested in accordance with
MIL-STD-202, Method 208
MARKING
Temperature Coefficient: T00 = 200 ppm, T0 = 150 ppm, T1 = 100 ppm, T2 = 50 ppm, T9 = 25 ppm
CPF1, CPF2, CPF3: (5 lines)
DALE Manufacturer’s name
CPF-1 Style and size
49.9 kValue
1 % T2 Tolerance and TC
1208 4-digit date code
PERFORMANCE
TEST MAX. R (TYPICAL TEST LOTS)
Thermal Shock ± 1.0 %
Short Time Overload ± 0.5 %
Low Temperature Operation ± 0.5 %
Moisture Resistance ± 1.5 %
Resistance To Soldering Heat ± 0.5 %
Shock ± 0.5 %
Vibration ± 0.5 %
Terminal Strength ± 0.5 %
Dielectric Withstanding Voltage ± 0.5 %
Life ± 2.0 %
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.