CURRENT 4.0 Amperes VOLTAGE 50 to 1000 Volts KBL4005 THRU KBL407 Features * High case dielectric Strength of 1500V * Low Forward Voltage Drop, High Current Capability * Surge Overload Rating to 150A Peak * Ideal for Printed Circuit Board Application * Plastic Material - UL Flammability Classification 94V-0 A B - + C H Mechanical Data KBL G * Case : Molded Plastic * Terminals : Plated Leads, Solderable per MIL-STD-202, Method 208 * Polarity : Symbols Marked on Case * Approx. Weight : 5.6 grams * Marking : Type Number D E Dim Min Max A 18.50 19.50 B 15.40 16.40 C 19.00 D 6.20 6.50 E 4.60 5.60 G 1.50 2.00 H 1.30 T ypical A ll Dimens ions in mm Maximum Ratings And Electrical Characteristics (Ratings at 25 ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols KBL 4005 KBL 401 KBL 402 KBL 404 KBL 405 KBL 406 KBL 407 Units Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking voltage VRMM VRWM VR 50 100 200 400 600 800 1000 Volts RMS Reverse voltage VRMS 35 70 140 280 420 560 700 Volts @ TC=75 Io 4.0 Amps Non-Repetitive Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) IFSM 150 Amps Forward Voltage per element @ IF=3.0 A VFM 1.1 Volts Peak Reverse Current at Rated DC Blocking voltage @ TC=25 10 A Average Rectified Output Current @ TC=100 I2t Rating for Fusing (t<8.3ms) (Note 2) Typical Thermal Resistance, Junction to Case (Note 1) Operating and Storage Temperature Range IR 1.0 mA I2t 166 A2S RJA 19 /W Tj TSTG -65 to +125 Notes: (1) Thermal Resistance from junction to case per element mounted on PC board with 13 x 13 x 0.03mm land areas. (2) Non-repetitive for t > 1ms and < 8.3ms. RATING AND CHARACTERISTIC CURVES KBL4005 THRU KBL407 5 20 (A) (A) 4 I F , INST ANT ANE OUS FWD CURRENT OUTPUT CURRENT I O , AVERAGE Tj = 25C Pulse Width = 300 ms 2% Duty Cycle 10 3 2 1 Single Phase Half Wave 60 Hz Resistive or Inductive Load 0 20 40 60 80 100 120 140 1.0 0.1 0.01 0 200 0.8 1.0 1.2 1. 4 T C = 100C 1.0 150 100 50 8.3ms Single Half Sine-W ave JEDEC Method 0 0.6 10 CURRENT (mA) 250 0.4 V F , INST ANT ANEOUS FOR WARD V OLTAGE (V) Fig. 2 Typical Forward Characteristics 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current I R , INST ANT ANE OUS REVERSE I FSM , PEAK F OR WARD SURGE CURRENT (A) T C , CASE TEMPERA TURE (C) Fi g. 1 Forward Current Deratin g Curve 0.2 0.1 T A = 25C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RA TED PEAK REVERSE VOL TAGE (% ) Fig. 4 Typical Reverse Characteristics, per element