Ordering number:ENN3138 NPN Epitaxial Planar Silicon Transistors 2SC4519 High-Speed Switching Applications Features Package Dimensions * Adoption of FBET process. * Low collector-to-emitter saturation voltage. * High-speed switching. * Small-sized package. unit:mm 2018B 0.4 0.16 0 to 0.1 1 : Base 2 : Emitter 3 : Collector SANYO : CP 0.8 1.1 1 0.95 0.95 2 1.9 2.9 0.5 1.5 2.5 3 0.5 [2SC4519] Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 60 V Collector-to-Emitter Voltage VCEO 45 V Emitter-to-Base Voltage VEBO IC 5 500 ICP PC 200 mW 150 C -55 to +150 C Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Tj Storage Temperature Tstg 1 V mA A Electrical Characteristics at Ta = 25C Parameter Symbol Collector Cutoff Current Emitter Cutoff Current DC Current Gain ICBO IEBO VCB=45V, IE=0 VEB=3V, IC=0 hFE1 VCE=2V, IC=50mA VCE=2V, IC=500mA hFE2 Gain-Bandwidth Product fT C ob Output Capacitance * : The 2SC4519 is classified by 50mA hFE as follows : Marking : TT Rank 4 hFE rank : 4, 5, 6 hFE Conditions Ratings min typ max 100* 0.5 A 0.5 A 400* 40 VCE=2V, IC=50mA 350 VCB=10V, f=1MHz 4 100 to 200 Unit MHz pF Continued on next page. 5 6 140 to 280 200 to 400 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 92304TN (PC)/D2598HA (KT)/7059MO, TS No.3138-1/4 2SC4519 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage Ratings Conditions Collector-to-Emitter Breakdown Voltage IC=200mA, IB=10mA VBE(sat) IC=200mV, IB=10mA V(BR)CBO IC=10A, IE=0 V(BR)CEO IC=1mA, RBE= Emitter-to-Base Breakdown Voltage V(BR)EBO min typ VCE(sat) Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Turn-ON Time Fall Time tf 0.15 0.45 V 0.8 1.2 V 60 IE=10A, IC=0 See specified test circuit. t on tstg Storage Time Unit max V 45 V 5 V 60 120 ns See specified test circuit. 150 270 ns See specified test circuit. 200 350 ns Switching Time Test Circuit IB1 RB INPUT PW=20s D.C.1% OUTPUT IB2 RL VR 50 + 100F VBE= --1V + 470F VCC=25V 20IB1= --20IB2=IC=200mA IC -- VCE 100 IC -- VBE 600 VCE=2V 60 250A 200A 40 150A 100A 20 IB=0 0 1 2 4 25C --25C 200 0 5 0.2 0.4 0.6 0.8 1.0 Base-to-Emitter Voltage, VBE - V ITR07150 hFE -- IC Ta=75C 3 25C --25C 2 100 VCE=2V Gain-Bandwidth Product, fT - MHz 5 7 5 3 1.2 ITR07151 fT -- IC 7 VCE=2V 7 DC Current Gain, hFE 300 0 3 Collector-to-Emitter Voltage, VCE - V 1000 400 100 50A 0 Ta=75 300A C 500 350A 80 Collector Current, IC - mA Collector Current, IC - mA 400A 5 3 2 100 2 7 10 5 1.0 2 3 5 10 2 3 5 100 Collector Current, IC - mA 2 3 5 1000 ITR07152 5 7 10 2 3 5 7 100 Collector Current, IC - mA 2 3 5 ITR07153 No.3138-2/4 2SC4519 Cob -- VCB 2 VCE(sat) -- IC 1000 IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE (sat) - mV Output Capacitance, Cob - pF f=1MHz 10 7 5 3 2 3 2 25C Ta= --25C 75C 7 5 5 7 2 1.0 3 5 7 2 10 Collector-to-Base Voltage, VCB - V 3 5 5 Switching Time, SW Time - ns 5 3 2 1.0 Ta=75C 25C --25C 5 3 5 10 2 3 5 2 100 Collector Current, IC - mA 3 5 1000 ITR07155 SW Time -- IC 5 IC / IB=20 7 2 1.0 ITR07154 VBE(sat) -- IC 7 Base-to-Emitter Saturation Voltage, VBE (sat) - V 5 100 1.0 VCC=25V IC=20IB1= --20IB2 3 tstg 2 to n tf 100 7 5 3 2 10 3 5 1.0 2 3 5 10 2 3 5 2 3 100 Collector Current, IC - mA 5 1000 ITR07156 3 5 7 100 2 3 Collector Current, IC - mA 5 7 ITR07157 PC -- Ta 250 Collector Dissipation, PC - mW 7 200 150 100 50 0 0 20 40 60 80 100 120 Ambient Temperature, Ta - C 140 160 ITR07158 No.3138-3/4 2SC4519 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2004. Specifications and information herein are subject to change without notice. PS No.3138-4/4