TQQ7303 RFMD + TriQuint = Qorvo 1747.5 MHz LTE Band 3 Uplink BAW Filter Applications LTE Band 3 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3 x 3 mm leadless SMT Package Product Features Functional Block Diagram 75 MHz Bandwidth High Attenuation Low Loss Single-ended Operation Small Size: 3 x 3 x 1.02 mm Surface Mount Device RoHS Compliant, Pb-Free 1 Ground 6 Ground Input 2 5 Output Ground 3 4 Ground Top View General Description Pin Configuration The TQQ7303 is an exceptionally high performance uplink BAW filter for LTE Band 3. This filter is housed in a compact 3 x 3 x 1.02 mm package for base station applications. Pin No. Label 2 5 1,3,4,6 Input Output Case Ground Low insertion loss, coupled with high attenuation makes this filter an ideal choice for uplink RF filtering needs. The TQQ7303 is part of TriQuint's extensive portfolio of RF Baw and SAW filters. Ordering Information Part No. Description TQQ7303 TQQ7303-EVB 1747.5 MHz BAW Filter Evaluation board Standard T/R size = 2500 pieces on a 7" reel Datasheet: Rev D 10-15-15 (c) 2015 TriQuint Semiconductor, Inc - 1 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com TQQ7303 1747.5 MHz LTE Band 3 Uplink BAW Filter RFMD + TriQuint = Qorvo Absolute Maximum Ratings Parameter Recommended Operating Conditions Rating Storage Temperature RF Input Power (CW, +55 C for 10,000 hours) (CW, +105 C for 100,000 hours) -40 to +95 C +30 dBm +24 dBm Parameter Min TCASE -40 Typ Max Units +85 C Electrical specifications are measured at specified test conditions. Operation of this device outside the parameter ranges given above may cause permanent damage. Electrical Specifications (1,2,3) Test conditions unless otherwise specified: Temp. +25 C, ZS=ZL=50 Ohms Parameter Conditions Pass Band Frequency Center Frequency 3.0 dB Bandwidth Insertion Loss 1710 - 1785 MHz Passband Ripple(5)(6) 1710 - 1785 MHz Group Delay Variation 1710 - 1785 MHz Group Delay Variation Any 5 MHz band in passband +25 C -40 C to +85 C +25 C -40 C to +85 C +25 C +25 C to +85 C +25 C -40 C to +85 C Input/Output VSWR Stopband Attenuation (relative to zero dB) Source/Load Impedance (7) 0.9 - 720 MHz 720 - 1670 MHz 1670 - 1690 MHz 1805 - 1825 MHz (-40 to -10 C) 1825 - 1880 MHz 1880 - 1920 MHz 1920 - 2110 MHz 2110 - 2170 MHz 2170 - 2660 MHz 2660 - 2690 MHz 2690 - 3800 MHz 3800 - 5000 MHz Single ended Min Typ Max 1710 30 28 10 38 44 30 40 40 24 22 10 5 - 1747.5 81 2.4 3.0 1.0 1.6 20 38 7 14 1.9:1 32 32 20 46 52 44 42 44 28 26 17 11 50 1785 3.0 3.5 1.8 2.4 40 55 18 30 2.4:1 -- Units MHz MHz dB dB p-p ns p-p ns p-p ratio dB Ohms Notes: 1. All specifications are based on the TriQuint schematic for the main reference design. 2. Production test is performed at room temp. to a guard-banded specification to ensure electrical compliance over temperature. 3. Electrical margin has been built into the design to account for variation due to temperature drift and manufacturing tolerances. 4. Typical values are based on average measurements at room temperature of 25C. 5. This is defined as the difference between the maximum and minimum insertion loss within the specified band. 6. This is defined as the worst difference between a peak and adjacent valley within defined frequency points. 7. This is the optimum impedance in order to achieve the performance shown. Datasheet: Rev D 10-15-15 (c) 2015 TriQuint Semiconductor, Inc - 2 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com TQQ7303 RFMD + TriQuint = Qorvo 1747.5 MHz LTE Band 3 Uplink BAW Filter TQQ7303-PCB Evaluation Board 2 5 TriQuint Q7303 959027 50 YYWW XXXX 1,3,4,6 50 960700 Single-ended Input Single-ended Output Evaluation Board PCB Information Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick Datasheet: Rev D 10-15-15 (c) 2015 TriQuint Semiconductor, Inc - 3 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com TQQ7303 RFMD + TriQuint = Qorvo 1747.5 MHz LTE Band 3 Uplink BAW Filter Performance Plots Test conditions unless otherwise noted: Temp.= +25 C Datasheet: Rev D 10-15-15 (c) 2015 TriQuint Semiconductor, Inc - 4 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com TQQ7303 1747.5 MHz LTE Band 3 Uplink BAW Filter RFMD + TriQuint = Qorvo Package Marking and Dimensions 0.10 C 3.000.10 2x C 0.10 C 1.020.07 (5X) 0.650x X 0.600y A 3.000.10 2x 0.10 B 1.071 0.10 Pin #1 Identifier C A B PIN 1 0.10 C 10 (1X) 1.400x X 0.600y 0.700 C A B Q7303 YYWW aXXXX 1.100 3.000.10 3.000.10 1.100 1.075 Package Marking SIDE VIEW Product Identifier: Q7303 Date Code: YYWW Assembly Code: AaXXXX 0.1000.100 0.1000.100 BOTTOM VIEW TOP VIEW 0.10 C 2x C 0.10 C 1.020.07 (5X) 0.650x X A 3.000.10 2x B 0.10 C 0.10 C 3.000.10 3.000.10 3.000 Pin #1 Identifier 0.1 SIDE VIEW TOP VIEW Notes: 1. All dimensions are in millimeters 2. All tolerances are 0.15 mm except overall length and width 0.10 mm 3. Contact plating : ENIG (Electroless Nickel Immersion Gold) 4. Terminations: 0.5 - 1.0 m Au plating, over a 2 - 6 m Ni plating PCB Mounting Pattern Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. Use 1 oz. copper minimum for top and bottom layer metal. Datasheet: Rev D 10-15-15 (c) 2015 TriQuint Semiconductor, Inc - 5 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com TQQ7303 RFMD + TriQuint = Qorvo 1747.5 MHz LTE Band 3 Uplink BAW Filter Tape and Reel Information - Carrier and Cover Tape Dimensions Tape and reel specifications for this part are also available on the TriQuint website. Standard T/R size = 2500 pieces on a 7" reel Feature Cavity Centerline Distance Cover Tape Carrier Tape Measure Length Width Depth Pitch Cavity to Perforation - Length Direction Cavity to Perforation - Width Direction Width Width Datasheet: Rev D 10-15-15 (c) 2015 TriQuint Semiconductor, Inc - 6 of 8 - Symbol Size (in) Size (mm) A0 B0 K0 P1 P2 F C W 0.132 0.132 0.055 0.157 0.079 0.138 0.213 0.315 3.35 3.35 1.40 4.00 2.00 3.50 5.40 8.00 Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com TQQ7303 RFMD + TriQuint = Qorvo 1747.5 MHz LTE Band 3 Uplink BAW Filter Tape and Reel Information - Reel Dimensions Tape and reel specifications for this part are also available on the TriQuint website. Standard T/R size = 2,500 pieces on a 7" reel. Feature Flange Hub Measure Diameter Thickness Space Between Flange Outer Diameter Arbor Hole Diameter Key Slit Width Key Slit Diameter Datasheet: Rev D 10-15-15 (c) 2015 TriQuint Semiconductor, Inc - 7 of 8 - Symbol Size (in) Size (mm) A W2 W1 N C B D 6.969 0.559 0.346 2.283 0.512 0.079 0.787 177.0 14.2 8.8 58.0 13.0 2.0 20.0 Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com TQQ7303 1747.5 MHz LTE Band 3 Uplink BAW Filter RFMD + TriQuint = Qorvo Product Compliance Information ESD Sensitivity Ratings Solderability Compatible with both lead-free (260C maximum reflow temperature) and tin/lead (245C maximum reflow temperature) soldering processes. Caution! ESD-Sensitive Device Contact plating: ENIG (Electroless Nickel Immersion Gold) ESD Rating: Value: Test: Standard: Class 0B 125 V to < 250 V Human Body Model (HBM) ESDA / JEDEC Standard JS-001-2012 ESD Rating: Value: Test: Standard: Class B > 200 V to < 400 V Machine Model (MM) JEDEC Standard JESD22-A115F MSL Rating MSL Rating: Level 3 Test: 260 C convection reflow Standard: JEDEC Standard IPC/JEDEC J-STD-020 RoHs Compliance This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Lead Free Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@triquint.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: sjcapplications.engineering@triquint.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or lifesustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Datasheet: Rev D 10-15-15 (c) 2015 TriQuint Semiconductor, Inc - 8 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com