Adapters and Transitions 713-100 Metal Straight, 45, and 90 Connector Adapters for use with Transition Fittings Circular connector adapter, non-self-locking with environmental O-Ring for use with transition fittings How To Order Product Series 713 Angular Function S = Straight K = 45 L = 90 A S Connector Designator (Table I, Intro) F Finish (Table II) 100 M Adapter Material 100 = Aluminum 101 = Brass 110 = Stainless Steel 1 = Style 1 16 1 32 - 4 Shell Size (Table III) O-Ring 45 Length S Only - In 1/2 Inch (12.7 mm) Increments (e.g. 4 = 2 Inches) See pg. A-32 for minimum lengths Dash No. (Table IV) Length A Thread (Table I, Intro) G OC or D (Table I, Intro) E D SYM L 90 SYM K 45 OJ Typ SYM S Straight H Thread E Material and Finish * Adapters, Coupling Nuts and Elbows - Table II (See P/N development) * O-Ring - Silicone/N.A. Notes * Interface O-Ring not applicable to connector designator A. (c) 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-30 E-Mail: sales@glenair.com Adapters and Transitions 713-100 Metal Straight, 45, and 90 Connector Adapters for use with Transition Fittings Table III: Shell Size/Dimensions Shell Size A, D, E, H F, J,K, L,S 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 28 25 24 32 36 - Max Dash No. Ref** 08 12 16 20 24 24 32 32 40 40 48 64 D Max .531 .625 .688 .719 .906 .968 1.031 1.156 1.219 1.281 1.593 1.718 E Max (13.5) (15.9) (17.5) (18.3) (23.0) (24.6) (26.2) (29.4) (31.0) (32.5) (40.5) (43.6) F Max .781 (19.8) .437 (11.1) .906 (23.0) .500 (12.7) .906 (23.0) .500 (12.7) 1.000 (25.4) .562 (14.3) 1.062 (27.0) .656 (16.7) 1.062 (27.0) .656 (16.7) 1.093 (27.8) .719 (18.3) 1.156 (29.4) .812 (20.6) 1.281 (32.5) .812 (20.6) 1.531 (38.9) 1.093 (27.8) 1.719 (43.7) 1.093 (27.8) 1.906 (48.4) 1.156 (29.4) G Max .625 .656 .719 .781 .844 .844 .844 .906 .906 .906 1.219 1.281 (15.9) (16.7) (18.3) (19.8) (21.4) (21.4) (21.4) (23.0) (23.0) (23.0) (31.0) (32.5) ** Dimensions D-E-F-G apply to connector Shell Size and Conduit Dash No. combinations listed. When larger Conduit Dash Numbers are selected, consult factory for dimensions. Dash No. 06 08 09 10 12 14 16 20 24 28 32 40 48 56 64 80 Table IV: Conduit Size Conduit Size H Thread OJ (Ref) Class 2A .015 (.4) 72 74 75 06 06 7/16 - 28 UNEF .193 (4.9) 08 1/2 - 20 UNF .255 (6.5) 09 09 09 9/16 - 24 UNEF .286 (7.3) 10 9/16 - 24 UNEF .317 (8.1) 12 12 12 5/8 - 24 UNEF .380 (9.7) 14 14 11/16 - 24 UNEF .442 (11.2) 16 16 16 3/4 - 20 UNEF .505 (12.8) 20 20 20 7/8 - 20 UNEF .630 (16.0) 24 24 24 1 - 20 UNEF .755 (19.2) 28 28 1 3/16 - 18 UNEF .880 (22.4) 32 32 32 1 5/16 - 18 UNEF 1.005 (25.5) 40 40 40 1 1/2 - 18 UNEF 1.255 (31.9) 48 48 48 1 3/4 - 18 UNS 1.505 (38.2) 56 56 2 - 18 UNS 1.755 (44.6) 64 64 2 1/4 - 16 UN 2.005 (50.9) 80 2 3/4 - 16 UN 2.505 (63.6) B J M N NC NF T Z1 E Table II: Finish Finish Sym Olive Drab over Cadmium Plate Gold Iridite over Cadmium Plate over Nickel Electroless Nickel Olive Drab over Cadmium Plate over Nickel Zinc Cobalt, Olive Drab Olive Drab over Cadmium Plate over Electroless Nickel (1000 Hour salt Spray) Bright Dip Cadmium over Nickel Passivate *** Consult factory for adapters using 3.000 inch (76.2) conduit (c) 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-31 E-Mail: sales@glenair.com