17
L
N
STEGO - PRODUCT CATALOGUE
TECHNICAL DATA
Operating voltage AC/DC 120 –240 V¹ (min. 110 V, max. 265 V)
Heating element PTC resistor – temperature limiting
Surface temperature < +85 °C (+185 °F) (according to VDE 0100),
except upper protective grille
Connection 2-pole terminal 2.5 mm², torque 0.8 Nm max.
Casing plastic according to UL94 V-0, black
Dimensions 98 x 38 x 75 mm
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 °C to +70 °C (-49 °F to +158 °F)
Operating/Storage humidity max. 90 % RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Approvals VDE, UL File No. E150057, EAC
Note other voltages on request
¹ Operating with voltages below AC/DC 140 V reduces heating performance by approx 10 %.
The heaters are used in enclosures where condensation is to be prevented or the temperature may not fall below
a minimum value. In this way corrosion is avoided and an even temperature is ensured. The heaters are designed
for permanent operation.
> Low surface temperature
> Double insulated (plastic housing)
> Wide voltage range
> Dynamic heating up
> Clip fixing
Example of connection
Thermostat
FTO 011 (NC)
Heater CSK 060
Art. No. Heating capacity² Inrush current max. Recommended pre-fuse T (time-delay) Weight (approx.)
06040.0-00 10 W 1.0 A 2.0 A 0.2 kg
06030.0-00 20 W 2.5 A 4.0 A 0.3 kg
² at +20 °C (+68 °F) ambient temperature
TOUCH-SAFE SMALL HEATER (SEMICONDUCTOR)
CSK 060 | 10 W, 20 W
HEATING
19.03.2019 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. www.stego.de | www.stego.co.uk | www.stegonorden.se
17
TECHNICAL DATASHEET
