SIGC156T120R2CQ - Infineon Technologies

SIGC156T120R2CQ

Edited by INFINEON Technologies AI PS DD HV3, L7181Q, 02.06.2005, Edition 1.0

IGBT Chip in Fieldstop-technology

This chip is used for:

• IGBT Modules

FEATURES:

• 1200V Fieldstop technology 120µm chip

• low turn-off losses

• short tail current

• positive temperature coefficient

• integrated gate resistor

Applications:

• SMPS, resonant applications

Chip Type VCE ICn Die Size Package Ordering Code

SIGC156T120R2CQ 1200V

100A 12.59 X 12.59 mm2

sawn on foil

SP0000-83655

MECHANICAL PARAMETER:

Raster size 12.59 X 12.59

Emitter pad size 8 x (3.98 x 2.38)

Gate pad size 1.46 x 0.8

Area total / active 158.5 / 132.6

mm2

Thickness 120 µm

Wafer size 150 mm

Flat position 90 grd

Max.possible chips per wafer 82 pcs

Passivation frontside Photoimide

Emitter metallization 3200 nm Al Si Cu

Collector metallization 1400 nm Ni Ag –system

suitable for epoxy and soft solder die bonding

Die bond electrically conductive glue or solder

Wire bond Al, <500µm

Reject Ink Dot Size ∅ 0.65mm ; max 1.2mm

Recommended Storage Environment store in original container, in dry nitrogen,

< 6 month at an ambient temperature of 23°C

SIGC156T120R2CQ

Edited by INFINEON Technologies AI PS DD HV3, L7181Q, 02.06.2005, Edition 1.0

MAXIMUM RATINGS:

Parameter Symbol Value Unit

Collector-emitter voltage, Tj=25 °C VCE 1200 V

DC collector current, limited by Tjmax IC 1 ) A

Pulsed collector current, tp limited by Tjmax Icpuls 300 A

Gate emitter voltage VGE ±20 V

Operating junction and storage temperature Tj, Tstg -40 ... +150 °C

1 ) depending on thermal properties of assembly

STATIC CHARACTERISTICS (tested on chip), Tj=25 °C, unless otherwise specified:

Value

Parameter Symbol Conditions Min. typ. max. Unit

Collector-emitter breakdown voltage V(BR)CES VGE=0V , IC=5mA 1200

Collector-emitter saturation voltage VCE(sat) VGE=15V, IC=100A 2.1

Gate-emitter threshold voltage VGE(th) IC=4mA , VGE=VCE 5.5

Zero gate voltage collector current ICES VCE=1200V , VGE=0V 12 µA

Gate-emitter leakage current IGES VCE=0V , VGE=20V 600 nA

Integrated gate resistor RGint 5 7 Ω

ELECTRICAL CHARACTERISTICS (tested at component):

Value

Parameter Symbol Conditions min. typ. max. Unit

Input capacitance Ciss 7850

Output capacitance Coss 650

Reverse transfer capacitance Crss

VCE=25V,

VGE=0V,

f=1MHz 275

SWITCHING CHARACTERISTICS (tested at component), Inductive Load

Value

Parameter Symbol Conditions 1) min. typ. max. Unit

Turn-on delay time td(on) 234

Rise time tr 40

Turn-off delay time td(off) 367

Fall time tf

Tj=125°C

VCC=600V,

IC=100A,

VGE=-15/15V,

RGext= 5.6 Ω 84

1) values also influenced by parasitic L- and C- in measurement and package.

SIGC156T120R2CQ

Edited by INFINEON Technologies AI PS DD HV3, L7181Q, 02.06.2005, Edition 1.0

CHIP DRAWING:

SIGC156T120R2CQ

Edited by INFINEON Technologies AI PS DD HV3, L7181Q, 02.06.2005, Edition 1.0

FURTHER ELECTRICAL CHARACTERISTICS:

This chip data sheet refers to the

device data sheet

DESCRIPTION:

AQL 0,65 for visual inspection according to failure catalog

Electrostatic Discharge Sensitive Device according to MIL-STD 883

Test-Normen Villach/Prüffeld

Published by

Infineon Technologies AG,

D-81726 München

Attention please!

The information herein is given to describe certain components and shall not be considered as warranted

characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,

regarding circuits, descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest

Infineon Technologies Office in Germany or our Infineon Technologies Representatives world -wide (see

address list).

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types

in question please contact your nearest Infineon Technologies Office.

Infineon Technologies components may only be used in life-support devices or systems with the express

written approval of Infineon Technologies, if a failure of such components can reasonably be expected to

cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or

system. Life support devices or systems are intended to be implanted in the human body, or to support

and / or maintain and sustain and / or protect human life. If they fail, it is reasonable to assume that the

health of the user or other persons may be endangered.