www.Amprobe.com ACD-14 PLUS 600A Clamp-On Multimeter with Dual Display Easy-To-Use The ACD-14 PLUS is the professionals' choice for both HVAC and Electrical applications due to its complete set of measuring features. Its dual displays allows viewing amperage and voltage simultaneously. The ACD-14 PLUS meter offers thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 25 mm. Both meters also measure Capacitance and Frequency. Very versatile clamp multimeters to support all your daily measurement needs. * Dual Displays - Permits simultaneous reading of Amperage & Voltage * AC Current to 600A * New thin jaws, 5mm thinner than others to access tight measurement spaces * Micro Amps measurement for testing Flame Sensors * Continuity Buzzer * Frequency measurement * Diode test * Hold and Maximum reading functions * In rush current * Capacitance to 3000 F * Accommodates conductors up to 25 mm (1.0") in diameter * Temperature with Type-K Thermocouple probe * Auto ranging * AC and DC Voltage to 600V * Auto power off and low battery indication * Resistance to 40M * Rubber over-molded case ACD-14 PLUS Specifications Specifications Display Update Rate Polarity Operating Temperature Relative Humidity Altitude Power Supply Battery Life Range 3-3/4 digits 4000 counts, dual LCD displays 3 per second nominal Automatic 0C to 40C (32F to 104F) Maximum relative humidity 80% for temperatures up to 31C (88F) decreasing linearly to 50% relative humidity at 40C (104F) Indoor operation below 2000m (6,562 ft) Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032). 95 hours approx. (in DCV mode) Safety CE EN61010-1, EN61010-2-032 - Pollution Degree 2 E.M.C. Meets EN61326 Dimension Weight Included Accessories L190mm X W 63mm X H 32mm (L 7.48" X W 2.48" X H 1.25") 204 g (0.450 lb approx.) Test Leads, Carrying Case, Bead Type, Thermocouple with banana plug, Users Manual For more detailed specifications see users manual. (c)2014 Amprobe. All rights reserved. For detailed specifications and ordering info go to www.Amprobe.com 3128489 B www.Amprobe.com ACD-14 PLUS Detailed Specifications Specifications Display Update Rate Polarity Low Battery Indication Operating Temperature Relative Humidity Altitude Range 3-3/4 digits 4000 counts, dual LCD displays 3 per second nominal Automatic Below approx. 2.4V 0C to 40C (32F to 104F) Maximum relative humidity 80% for temperatures up to 31C (88F) decreasing linearly to 50% relative humidity at 40C (104F) Indoor operation below 2000m (6,562 ft) Storage Temperature -20C to 60C (-4F to 140F), < 80% R.H. (with battery removed) Temperature Coefficient Nominal 0.15 x (specified accuracy)/F @ 0C - 18C or 28C - 40C (32F -64F or 82F - 104F), or otherwise specified Sensing Power Supply Average sensing for ACD-14 PLUS Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032). Battery Life 95 hours approx. (in DCV mode) Power Consumption 2.5 mA typical for ACD-14 PLUS Low Battery Indication Auto Power Off APO Consumption Safety Transient Protection E.M.C. Overload Protections RMS Dimension Weight Below approx. 2.4V (battery symbol appears in upper right) After being idle for 30 minutes ACD-14 PLUS: 0.8A typical except 25A typical for temperature function CE EN61010-1, EN61010-2-032 - Pollution Degree 2 6.5kV (1.2/50s surge) for all models Meets EN61326 ACA Clamp-on jaws: AC 600A RMS continuous "+" & "COM" terminals (all functions): 600VDC/VAC L190mm X W 63mm X H 32mm (L 7.48" X W 2.48" X H 1.25") 204 g (0.450 lb approx.) Jaw opening & Conductor diameter 25 (1.0") max Included Accessories Test Leads, Carrying Case, Bead Type, Thermocouple with banana plug, Users Manual Optional Accessories ELS2A Line splitter ACF-3000AK 3000A AC Flexible Clamp-On Attachment TA-1A Temperature Adapter TL36A Heavy Duty Test Leads with Threaded Alligator Clips Electrical Specifications 23C 5C (73F 9F) & < 75% R.H. Specifications DC Voltage AC Voltage [50Hz -- 500Hz] Average sensing AC Current (Clamp-on) [50Hz / 60Hz] (c)2014 Amprobe. All rights reserved. Range 400.0 mV (0.3% rdg + 4 digits) 4.000V, 40.00V, 400.0V (0.5% rdg + 3 digits) 600V (1.0% rdg + 4 digits) NMRR: >50dB @ 50/60Hz CMRR: >120dB @ DC, 50/60Hz, Rs=1k Input Impedance: 10M, 30pF nominal (1000M for 400.0mV range) 4.000V, 40.00V, 400.0V (1.5% rdg + 5 digits) 600V (2.0% rdg + 5 digits) CMRR: >60dB @ DC to 60Hz, Rs=1k Input Impedance: 10M, 30pF nominal 40.00A (1.5% rdg + 8 digits) 400.0A (1.5% rdg + 8 digits) 600A (1.5% rdg + 8 digits)* *Accuracy specified to 600A continuous. For detailed specifications and ordering info go to www.Amprobe.com 3128489 B www.Amprobe.com Electrical Specifications (23 C 5 C & < 75% R.H.), cont. Specifications Max/Hold (AC Current only) Ohms Range Specified accuracy 50 digits for changes > 25ms in duration 400.0 (0.8% rdg + 8 digits) 4.000k, 40.00k, 400.0k (0.6% rdg + 4 digits) 4.000M (1.0% rdg + 4 digits) 40.00M (2.0% rdg + 4 digits) Open Circuit Voltage: 0.4VDC typical Audible Continuity Tester: Audible threshold: between 10 and 120. 500.0nF, 5.000F, 50.00F, 500.0F, 3000F* (3.5% rdg + 6 digits)*** Capacitance *Additional 50.00nF range accuracy is not specified **Accuracies with film capacitor or better ***Specified with battery voltage above 2.8V (approximately half full battery). Accuracy decreases gradually to 12% at low battery warning voltage of approximately 2.4V DC A Range 400.0A 2000A Accuracy (2.0% rdg + 4 digits) (1.5% rdg + 3 digits) Burden Voltage 2.8mV/A 2.8mV/A AC A (50Hz - 500Hz) Range 400.0A 2000A Accuracy (2.0% rdg + 5 digits) (1.5% rdg + 5 digits) Burden Voltage 2.8mV/A 2.8mV/A Frequency (Voltage input only) Volts 400.0mV 4.000V 40.00V 400.0V Range 10Hz to 2kHz 5Hz to 40kHz 5Hz to 100kHz 5Hz to 40kHz Diode Tester Temperature (Type-K Thermocouple) Sensitivity 300mV 4V 28V 100V Accuracy (0.5% rdg + 4 digits) (0.5% rdg + 4 digits) (0.5% rdg + 4 digits) (0.5% rdg + 4 digits) Open Circuit Voltage: < 1.6 VDC Test Current (Typical): 0.25mA Range Accuracy* -20C to 300C (2% rdg + 3 C) 301 C ~ 537 C (3% rdg + 3 C) -4F to 572F (2% rdg + 6 F) 573 F ~ 999 F (3% rdg + 6 F) *Type-K thermocouple range & accuracy not included For complete specs please download the product datasheet and the product manual on www.Amprobe.com. Amprobe(R) info@amprobe.com Everett, WA 98203 Tel: 877-AMPROBE (267-7623) (c)2014 Amprobe. All rights reserved. Amprobe(R) Europe In den Engematten 14, 79286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0 For detailed specifications and ordering info go to www.Amprobe.com 3128489 B