Attenuator DIE
DC - 20 GHz
Rev. V4
MAT10xxx Series
1
1
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011352
1
Features
Medium Power Handling 2 W CW
Flat Response from DC to 20 GHz
Return Loss:
>18 dB DC to 12 GHz
>16 dB 13 to 20 GHz
Space Saving Footprint:
0.030” x 0.030” (0.762 x 0.762 mm)
Very Good Stability Over Temperature
(TRC <100 PPM)
Ground Wrap to Top
(No ground bonding required)
RoHS* Compliant
Description
These fixed attenuator chips are fabricated using our
state of the art thin film metallization and advanced
photolithography technology.
All devices are available in chip form with a
metalized ground connection on the back. This
ground is wrapped around on the four corners of the
chip so additional ground bonding ribbon is not
required.
The chips may be attached using conductive epoxy
or solder preform. Gold contacts on the input and
output pads make assembly, using standard
bonding equipment, fast and reliable. Custom values
and configuration available on request.
Part Number Attenuation (dB) Insertion Loss (dB) Return Loss (dB)
MAT10010 1 +/-0.30 >18
MAT10020 2 +/-0.30 >18
MAT10030 3 +/-0.30 >18
MAT10040 4 +/-0.30 >18
MAT10050 5 +/-0.30 >18
MAT10060 6 +/-0.35 >18
MAT10070 7 +/-0.35 >18
MAT10080 8 +/-0.35 >18
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
Front to back metallization in 4 places
Bonding pad sizes and resistor outline
may differ from value to value.
Electrical Specifications: TA = +25°C
CONTINUED
Attenuator DIE
DC - 20 GHz
Rev. V4
MAT10xxx Series
2
2
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011352
2
Electrical Specifications: TA = +25°C
Part Number Attenuation (dB) Insertion Loss (dB) Return Loss (dB)
MAT10090 9 +/-0.35 >18
MAT10100 10 +/-0.35 >18
MAT10110 11 +/-0.40 >18
MAT10120 12 +/-0.40 >18
MAT10130 13 +/-0.40 >18
MAT10140 14 +/-0.40 >18
MAT10150 15 +/-0.40 >18
MAT10160 16 +/-0.50 >18
MAT10170 17 +/-0.50 >18
MAT10180 18 +/-0.50 >18
MAT10190 19 +/-0.50 >18
MAT10200 20 +/-0.50 >18
MAT10210 21 +/-0.60 >18
MAT10220 22 +/-0.60 >18
MAT10230 23 +/-0.60 >18
MAT10240 24 +/-0.60 >18
MAT10250 25 +/-0.60 >18
MAT10260 26 +/-1.00 >18
MAT10270 27 +/-1.00 >18
MAT10280 28 +/-1.00 >18
MAT10290 29 +/-1.00 >18
MAT10300 30 +/-1.00 >18
Absolute Maximum Ratings1,2
Parameter Absolute Maximum
RF Incident Power 33 dBm
Operating Temperature -55°C to +150°C
Storage Temperature -65°C to +150°C
Assembly Temperature +280°C for 10 seconds
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. MACOM does not recommend sustained operation near these
survivability limits.
Attenuator DIE
DC - 20 GHz
Rev. V4
MAT10xxx Series
3
3
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011352
3
MACOM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
