www.njr.com
Designated client product
This product will be discontinued its pr oduction in the near term.
And it is provided for customers currently in use only, with a time limit .
It can not be avail able for your new project. Please select other new or
existing products.
For more information, please contact our sales office in y our r eg ion.
New Japan Radio Co.,Ltd.
NJM360
-
1
-
Ver.2011-12-12
HIGH SPEED DIFFERENTIAL COMPARATOR
■ GENERAL DESCRIPTION ■ PACKAGE OUTLINE
The NJM360 is a very high speed differential input, complementary
TTL output voltage comparator. The device has been optimized for
greater speed, input impedance and fan-out and lower input offset
voltage.
Applications involve high speed analog to digital converters and
zero-crossing detectors in disc file systems.
■ FEATURES
● Operating Voltage ( ±4.5V~±6.5V )
● High Speed Guarantee ( 20ns max. )
● Both output delay time has been precisely adjusted
● Complementary TTL Output
● High Input Impedance
● Stabilized Speed for Over Driving Change
● Bipolar Technology
● Fan-out is 4
● Low Input Offset Voltage
● Package Outline DIP8, DMP8, SOP8 JEDEC 150mil
■ PIN CONFIGURATION
■ EQUIVALENT CIRCUIT
NJM360D
( DIP8 )
NJM360E
( SOP8 )
NJM360M
( DMP8 )
PIN FUNCTION
1.NC
2.–INPUT
3.+INPUT
4.V-
5.GND
6.OUT2
7.OUT1
8.V+
NJM360D
NJM360M
NJM360E
1
2
3
4
8
7
6
5
1
2
3
4
8
7
6
5
NJM360
-
2
-Ver.2011-12-12
■ ABSOLUTE MAXIMUM RATINGS
( Ta=25˚C )
PARAMETER SYMBOL RATINGS UNIT
Supply Voltage V+/V- ± 8 V
Differential Input Voltage VID ± 5 V
Input Voltage VI ± 8 ( note1 ) V
( DIP8 ) 500
( DMP8 ) 300
Power Dissipation PD
( SOP8 ) 300
mW
Maximum Output Current IO ± 20 mA
Operating Temperature Range Topr -40~+85 ˚C
Storage Temperature Range Tstg -40~+125 ˚C
( note1 ) For supply voltage less than ±8V,the absolute input voltage is equal to the supply voltage.
■ ELECTRICAL CHARACTERISTICS
( Ta=25˚C )
PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT
Operating Supply Voltage V+ 4.5 5 6.5 V
Operating Supply Voltage V- -4.5 -5 -6.5 V
Input Offset Voltage VIO RS≤200Ω - 2 5 mV
Input Offset Current IIO - 0.5 3 μA
Input Bias Current IB - 5 20 μA
Output Resistance RO V
OUT=VOM - 100 - Ω
Response Time 1 tR1 V
+/V-=± 5V ( note1 ) - 13 25 ns
Response Time 2 tR2 V
+/V-=± 5V ( note2 ) - 12 20 ns
Response Time 3 tR3 V
+/V-=± 5V ( note3 ) - 14 - ns
Response Time Difference Between Outputs
( tpd of+VIN1 )-( tpd of-VIN2 ) ( note1 ) - 2 - ns
( tpd of+VIN2 )-( tpd of-VIN1 ) ( note1 ) - 2 - ns
( tpd of+VIN1 )-( tpd of+VIN2 ) ( note1 ) - 2 - ns
( tpd of-VIN1 )-( tpd of-VIN2 ) ( note1 ) - 2 - ns
Input Resistance RIN f=1MHz - 17 - kΩ
Input Capacitance CIN f=1MHz - 3 - pF
Average Temperature Coefficient of Input Offset Voltage ΔVIO/ΔT RS=50Ω - 8 - μV/˚C
Average Temperature Coefficient of Input Offset Current ΔIIO/ΔT - 7 - nA/˚C
Common Mode Input Voltage Range VICM V
+/V-=± 6.5V ± 4 ± 4.5 - V
Differential Input Voltage Range VID ± 5 - - V
Output High Voltage ( High ) VOH V
+/V-=± 4.5V,IOUT=-320μA2.4 3 - V
Output Low Voltage ( Low ) VOL V
+/V-=± 4.5V,ISINK=6.4mA - 0.25 0.4 V
Positive Supply Current I+ V
+/V-=± 6.5V - 18 32 mA
Negative Supply Current I- V
+/V-=± 6.5V - -9 -16 mA
( note1 ) Response time measured from the 50% point of a 30mVP-P 10MHz sinusoidal input to the 50% point of the output.
( note2 ) Response time measured from the 50% point of a 2VP-P 10MHz sinusoidal input to the 50% point of the output.
( note3 ) Response time measured from the start of a 100mV input step with 5mV overdrive to the time when the output crosses the logic threshold.
NJM360
-
3
-
Ver.2011-12-12
■ TYPICAL CHARACTERISTICS
NJM360
-
4
-Ver.2011-12-12
■ AC TEST CIRCUIT
[CAUTION]
The specifications on this databook are only
given for information , without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative usages
of the product and not intended for the
guarantee or permission of any right including
the industrial rights.
