KFV Einbaukupplung nach IEC 60130-9, IP 40, mit Schraubverschluss und Lotanschlussen, fur Frontmontage 1. Temperaturbereich -40 C/+85 C 2. Werkstoffe Kontakttrager Kontaktbuchse 3- bis 8-polig Kontaktbuchse 12-polig Gehause PA GF CuZn, untersilbert und vergoldet CuZn, unternickelt und vergoldet Zn-Druckguss, unterkupfert und vernickelt CuZn, vernickelt Ringmutter 3. Mechanische Daten Steckkraft/Kontakt 3- bis 8-polig1 Steckkraft/Kontakt 12-polig2 Ziehkraft/Kontakt 3- bis 8-polig1 Ziehkraft/Kontakt 12-polig2 Kontaktierung mit Schutzart3 Weiteres siehe Tabelle < 5,0 N < 5,0 N > 1,2 N > 0,9 N Steckern 033098, 033099, SV, WSV IP 40 4. Elektrische Daten 5 m Durchgangswiderstand Weiteres siehe Tabelle 1 2 3 4 gemessen mit einem polierten Stahlstift, Nennma 1,5 mm gemessen mit einem polierten Stahlstift, Nennma 1,0 mm nach DIN EN 60529, nur in verschraubtem Zustand mit einem dazugehorigen Gegenstuck nach VDE 0110/IEC 60664 *a Mutter lose beigestellt nut enclosed separately ecrou ajoute separement *b Lotkelch bell-shaped solder terminal plot a souder en forme de coupe *c Montagerichtung (Frontseite) mounting direction (front side) direction de montage (cote front) *d Einbauoffnung port ouverture d'emplacement Polbilder, von der Lotseite gesehen Pin configurations, solder side view Schemas de raccordement, vus du cote a souder KFV 30 KFV 40 www.lumberg.com KFV 50 KFV 50/6 KFV 60 KFV 70 KFV 71 KFV 80 KFV 81 KFV 120 01/2006 Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40 Circular connectors with threaded joint acc. to IEC 60130-9, IP 40 Connecteurs circulaires avec verrouillage a vis suivant IEC 60130-9, IP 40 03 KFV 03 KFV Chassis socket acc. to IEC 60130-9, IP 40, with threaded joint and solder terminals, for front mounting Embase femelle suivant CEI 60130-9, IP 40, avec verrouillage a vis et connexion par soudure, pour montage de front 1. Temperature range 1. Temperature d'utilisation -40 C/+85 C 2. Materials Body Contact bush 3 to 8 poles Contact bush 12 poles Housing Ring nut PA GF CuZn, pre-silvered and gilded CuZn, pre-nickeled and gilded Zn diecast, pre-coppered and nickeled CuZn, nickeled 3. Mechanical data Corps isolant Prise de contact 3 a 8 poles Prise de contact 12 poles Boitier Ecrou a anneau Force d'insertion/contact 3-8 poles1 < 5,0 N < 5,0 N Force d'insertion/contact poles2 Force de separation/contact 3-8 poles1 > 1,2 N Force de separation/contact 12 poles2 > 0,9 N Raccordement avec connecteurs males 033098, 033099, SV, WSV 3 IP 40 Protection Pour plus de details, voir tableau s.v.p. 4. Caracteristiques electriques 4. Electrical data Resistance de contact 5 m Pour plus de details, voir tableau s.v.p. Designation Designation 1 2 3 4 Ans ch Wir lussque e se rsch ct nitt Sec tion ion de racc . de fil Bestellbezeichnung Ver pac ku Pac kag ngsein hei eu Uni te d nit (PU t (VE) 'em ) ball age (UE ) 4 Polz ah Pole l s Pole s 3 measured with a polished steel pin, nominal thickness 1.5 mm measured with a polished steel pin, nominal thickness 1.0 mm according to DIN EN 60529, only in locked position with a proper counterpart according to VDE 0110/IEC 60664 mm2 mesuree avec une tige d'acier poli, epaisseur nominale 1,5 mm mesuree avec une tige d'acier poli, epaisseur nominale 1,0 mm suivant DIN EN 60529, uniquement a l'etat verrouille avec un propre pendant suivant VDE 0110/CEI 60664 Bem es Rat sungss ed tro Cou curren m t ran t as sign e Bem essu ngs Rat spa ed Ten voltag 4 nnung 4 sion e assi gne 4 e Pru fspa n nun Test g vo Ten ltage sion de claq uag e Isol atio Insu nswid er lat Res ion re stand ista s nce istanc e d'is olem Kon ent tak Con tkap t a Cap act cap zitat a a con cite de citanc tact e Contact resistance 5 m For further information please see table 2 PA GF CuZn, sous-argente et dore CuZn, sous-nickele et dore Zn moule sous pression, sous-cuivre et nickele CuZn, nickele 3. Caracteristiques mecaniques Insertion force/contact 3-8 poles1 < 5.0 N < 5.0 N Insertion force/contact 12 poles2 Withdrawal force/contact 3-8 poles1 > 1.2 N Withdrawal force/contact 12 poles2 > 0.9 N Mating with plugs 033098, 033099, SV, WSV IP 40 Protection3 For further information please see table 1 -40 C/+85 C 2. Materiaux A V AC kV AC eff. pF 13 ~2 KFV 30 3 50 0,75 5 250 2 10 KFV 40 4 50 0,75 5 250 2 1013 ~2 KFV 50 5 50 0,75 5 60 1 1012 ~3 KFV 50/6 5 50 0,75 5 250 2 1013 ~2 KFV 60 6 50 0,75 5 250 2 1013 ~2 KFV 70 7 50 0,75 5 250 2 1013 ~2 KFV 71 7 50 0,75 5 60 1 1012 ~3 KFV 80 8 50 0,75 5 60 1 1012 ~3 KFV 81 8 50 0,75 5 60 1 1012 ~3 12 50 0,25 3 60 1 1012 ~3 KFV 120 Verpackung: im Karton Packaging: in a cardboard box Emballage: dans un carton www.lumberg.com 01/2006