ALUMINUM ELECTROLYTIC CAPACITORS LD Miniature sized, Long Life Assurance series Long Life product withstanding load life of 10000 to 20000 hours at +105C. Suited for the power supply for LED lighting. Compliant to the RoHS directive (2011/65/EU). CY HE LD Long Life Specifications Item Performance Characteristics Category Temperature Range -25 to +105C(10 to 100V, 450V), -40 to +105C(160 to 400V) Rated Voltage Range 10 to 450V Rated Capacitance Range 1 to 330F Capacitance Tolerance 20% at 120Hz, 20C 10 to 100 Rated Voltage(V) Leakage Current 160 to 450 After 1 minute's application of rated voltage at 20C, CV 1000 : I=0.1CV+40(A) or less After 1 minute's application of rated voltage at 20C, CV>1000: I=0.04CV+100(A) or less After 2 minute's application of rated voltage at 20C, leakage current is not more than 0.01CV or 3(A), whichever is greater. ---- Measurement frequency : 120Hz at 20C 10 0.45 Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 16 0.35 25 0.3 35 0.22 50 0.19 10 8 ---- 16 6 ---- 25* 35 4 ---- 50 to 100 3 ---- 63 0.17 100 0.15 160 to 450 0.24 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z-25C / Z+20C Z-40C / Z+20C ---- Capacitance change tan Leakage current 450 6 ---- 400 6 10 10 to 100 160 to 450 The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 10000 hours at 105C, the peak voltage shall not exceed the rated voltage. The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 20000 hours (12000 hours for 6.3x11L, 8x9L 10x9L, 15000 hours 8x11.5L, 10x12.5L) at 105C, the peakvoltage shall not exceed the rated voltage. Rated Voltage(V) Endurance 160 to 250 3 8 Within 25%(10V to 100V) 30%(160V to 450V) of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Type numbering system (Example : 400V 6.8F) Radial Lead Type d 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 Size code P0.5 D0.5 MAX. U L D 2 G 6 R 8 M PD T Configuration Capacitance tolerance (20%) L+ Pressure relief vent MAX. 15MIN Rated capacitance (6.8F) 4MIN Rated voltage (400V) Series name Type (mm) D 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.5 1.5 2.0 2.0 2.0 2.0 2.0 Configuration D 5 6.3 Pb-free leadwire Pb-free PET sleeve 8 * 10 12.5 to 18 PD HD DD ED * Please refer to page 20 about the end seal configuration. * Please refer to page 20, 21, 22 about the formed or taped product spec. * Please refer to page 4 for the minimum order quantity. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS LD series Dimensions Cap V 10 16 25 35 50 63 100 Code 1A 1C 1E 1V 1H 1J 2A 1 010 5x11 25 2.2 2R2 5x11 35 3.3 3R3 5x11 70 4.7 4R7 5x11 80 5x11 6.8 6R8 5x11 80 5x11 70 10 100 5x11 90 5x11 80 6.3x11 150 22 220 33 330 47 470 100 101 150 151 220 221 270 271 330 331 5x11 130 6.3x11 210 8x11.5 5x11 135 6.3x11 170 5x11 130 5x11 130 6.3x11 190 6.3x11 170 6.3x11 210 6.3x11 190 5x11 130 5x11 130 6.3x11 210 6.3x11 210 6.3x11 210 8x11.5 330 8x11.5 330 8x11.5 8x11.5 330 8x11.5 Frequency 1kHz 10kHz 100kHz 0.42 0.60 0.80 1.00 22 to 33mF 0.55 0.75 0.90 1.00 47 to 330mF 0.70 0.85 0.95 1.00 330 V 160 200 250 400 Code 2C 2D 2E 2G 450 2W 1 010 6.3 x 11 24 1.2 1R2 8x9 28 1.5 1R5 6.3 x 11 29 8x9 30 1.8 1R8 2R2 2.7 2R7 3.3 3R3 3.9 3R9 4.7 4R7 5.6 5R6 6.8 6R8 8.2 8R2 10 100 12 120 15 150 18 180 22 220 27 270 240 : Rated ripple (mArms) at 105C 100kHz 120Hz 2.2 230 330 1 to 10mF Cap 8x11.5 8x11.5 70 270 Frequency coefficient of rated ripple current Cap.(mF) Case size D x L (mm) 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8x9 52 55 70 8x9 33 6.3 x 11 36 8 x 11.5 40 8x9 33 8 x 11.5 43 8 x 11.5 47 6.3 x 11 42 95 10 x 12.5 121 10 x 9 48 10 x 12.5 57 10 x 12.5 61 49 8x9 53 6.3 x 11 50 8 x 11.5 62 10 x 12.5 64 10 x 16 58 8x9 56 8 x 11.5 8x9 62 68 10 x 16 85 10 x 16 62 8x9 66 10 x 9 76 10 x 16 88 10 x 20 88 8 x 11.5 80 10 x 12.5 90 10 x 20 92 88 10 x 12.5 97 12.5 x 20 140 12.5 x 25 240 16 x 20 292 16 x 20 305 16 x 25 392 18 x 20 312 92 10 x 9 10 x 12.5 10 x 16 10 x 16 42 33 6.3 x 11 10 x 9 8 x 11.5 36 6.3 x 11 Case size D x L (mm) 158 113 149 10 x 16 129 33 330 47 470 18 x 25 480 68 680 18 x 31.5 520 : Rated ripple current (mArms) at 105C 120Hz Frequency coefficient of rated ripple current Frequency Cap.(F) 120Hz 1kHz 10kHz 100kHz or more 1 to 5.6F 1.00 1.60 1.80 2.00 6.8 to 18F 1.00 1.50 1.70 1.90 22 to 68F 1.00 1.40 1.60 1.80 : In this case, 6 will be put at 12th digit of type numbering system. CAT.8100D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: ULD2W8R2MPD1TD ULD2D4R7MED1TD ULD2E3R3MED1TD ULD2C100MPD1TD ULD2W220MHD6TN ULD2C220MPD1TD ULD2E4R7MPD1TD ULD2G2R2MPD6TD ULD2E8R2MPD1TD ULD2G1R5MED1TD ULD2D100MPD1TD ULD2D8R2MPD1TD ULD2G3R9MPD1TD ULD2E100MPD1TD ULD2C5R6MED1TD ULD2D120MPD1TD ULD2G2R2MPD1TD ULD2D270MPD1TD ULD2E1R8MED1TD ULD2W100MPD1TD ULD2C6R8MED1TD ULD2G3R3MPD1TD ULD2G1R2MPD1TD ULD2W6R8MPD1TD ULD2E120MPD1TD ULD2D180MPD1TD ULD2E5R6MPD1TD ULD2E6R8MPD1TD ULD2D5R6MED1TD ULD2E180MPD1TD ULD2W270MHD1TN ULD2D6R8MPD1TD ULD2C330MPD1TD ULD2W470MHD1TN ULD2W330MHD1TN ULD2G6R8MPD1TD ULD2D2R2MED1TD ULD2G4R7MPD1TD ULD2G2R7MPD1TD ULD2W150MHD1TO ULD2G3R3MPD6TD ULD2G5R6MPD1TD ULD2G010MED1TD ULD2D5R6MPD6TD ULD2G1R5MPD6TD ULD2C150MPD1TD ULD2W5R6MPD1TD ULD2G8R2MPD1TD ULD2E2R2MED1TD ULD2D3R3MED1TD ULD2W330MHD6TN ULD2W220MHD1TO ULD2G1R8MPD1TD