WWW.LINDSTROMTOOLS.COM
26 27
WWW.LINDSTROMTOOLS.COM
80-SERIES
LINDSTROM 80-SERIES
TRIED AND TRUE PERFORMANCE
FOR THE TRADITIONAL USER
Surpassed only by our own Lindstrom Rx range,
the Lindstrom 80-Series remains the top choice
for the traditional user. This range of cutters offers
unsurpassed cutting capacity covering a wide range
of wire dimensions and types. The reasons are:
1% CARBON/CHROME BALL BEARING
GRADE STEEL
Material usually reserved for high stress applications
provides incredible impact resistance and resiliency
with smoother, cleaner penetration at the cutting
edge.
FORGED COMPONENTS
Grain structure follows profile of the blank to
maximize tool strength.
CNC GRINDING OF
FORGED BLANKS
Computer controlled machine grinding
guarantees edge angle accuracy and contact
which increases tool reliability and consistency.
63-65 HRC ON CUTTING EDGES
Precision induction hardening of 1% Carbon/
Chrome Ball Bearing Steel allows high
Rockwell hardness without brittleness
resulting in a longer lasting tool.
MICRO-BEVEL®
Micro-Bevel cutters
leave a minimal rise on
cut leads resulting in a
smaller overall surface
soldering area.
FLUSH
Lindstrom flush cutters leave an even
narrower and shorter rise on cut leads
then the Micro-Bevel in order to meet a
tighter specification for the cut lead-end
or to achieve a more flush result to a
board, component or part.
ULTRA-FLUSH®
The unique Ultra-Flush cutters leave
a flat surface on cut leads, which
is considered to be the ultimate in
conformance to tough soldering and
mechanical shock specifications.
PRECISION SCREW JOINT
Adjustable screw joint minimizes friction and
maximizes alignment of cutting edges.
REPLACEABLE SPRINGS
Due to the long life of 80-Series tools, replaceable
springs help reduce down time and stocking of
substitute tools.
LEAD-CATCHERS
These patented 80-Series accessories hold cut
wires, preventing injury and keeping leads
from flying into the assembly. Almost all 80-
Series cutters can be factory equipped with
a lead-catcher. Just add “S” to the
tool
part number. Ex. 8140-S.
ESD PROTECTION
All 80-Series cutters can be
equipped with DS or CO handles
to meet specialized ESD
requirements.
WARNING:
80-Series
grips are not insulated and
therefore 80-Series cutters
should never be used on
electrified equipment.
MICRO-BEVEL
FLUSH
ULTRA-FLUSH
80-Series Cutters
PRODUCT RANGES
INDIVIDUAL LISTINGS AND SPECIFICATIONS WWW.LINDSTROMTOOLS.COM
50
INDIVIDUAL LISTINGS AND SPECIFICATIONS
51
WWW.LINDSTROMTOOLS.COM
C
D
B
G
20
o
A
C
E
D
H
G
A
B
TIP
ANGLE
8149
8211
8149 0051106 114.0 14.0 5.0 6.0 5.0 5.0 3.2 0.1 - 0.6 Flush 48 1
4.49 0.55 0.23 0.24 0.23 0.23 0.13 0.01 - 0.02
Product EAN code A B C D E G H Capacity Bevel
code 731415+ mm mm mm mm mm mm mm mm
inch inch inch inch inch inch inch inch
8211 0101030 110.0 9.5 10.0 6.0 4.1 0.2 - 1.2 Flush 43 1
4.33 0.37 0.39 0.24 0.16 0.01 - 0.05
Product EAN code A B C D G Capacity Bevel
code 731415+ mm mm mm mm mm mm
inch inch inch inch inch inch
SHORT HEAD, 20°
80-Series Cutters
