Customer Specification

PART NO. 2167

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

1) Conductor

a) Material Tinned Copper, per ASTMB-33 and CID-A-A-59551

b) Stranding Solid

c) Diameter 0.005"

2) Braid Data

a) Nominal ID 5/32" (.156)

h) Federal Spec Number AA59569R36T0156

1) DSCC CID A-A-59569A

1) EU Directive 2011/65/EU(RoHS2):

All materials used in the manufacture of this part meet the requirements of

European Directive 2011/65/EU regarding the restriction of use of certain

hazardous substances in electrical and electronic equipment. No

Exemptions are required for RoHS Compliance on this item. Consult Alpha

Wire's web site for RoHS C of C.

2) REACH Regulation (EC 1907/2006):

European Union's REACH Substance of Very High Concern (SVHC)

candidate list in excess of 0.1% mass of the item.

3)California Proposition 65: The outer surface materials used in the manufacture of this part meet the

requirements of California Proposition 65.

1) Packaging

a) 100 ft. 9 x 4.5 x 3.5, Continuous

b) 250 ft. 9 x 4.5 x 3.5, 2 Pieces Max., 50 ft. Min. Length

Spool size may vary slightly

whether express, statutory or implied. In no event will Alpha be liable for any damages (including consequential,

indirect, incidental, special, punitive, or exemplary) whatsoever, even if Alpha had been advised of the possibility of

such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection

with the use, or inability to use, the information or specifications described herein.

ALPHA WIRE - CONFIDENTIAL AND PROPRIETARYNotice to persons receiving this document and/or technical

information. This document is confidential and is the exclusive property of ALPHA WIRE, and is merely on loan and

subject to recall by ALPHA WIRE at any time. By taking possession of this document, the recipient acknowledges

and agrees that this document cannot be used in any manner adverse to the interests of ALPHA WIRE, and that no

portion of this document may be copied or otherwise reproduced without the prior written consent of ALPHA WIRE. In

the case of conflicting contractual provisions, this notice shall govern the status of this document. <br /><br />©2019

This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the

European Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use

of certain hazardous substances used in the manufacture of electrical and electronic equipment. This certification extends to

amending Directive 2015/863/EU which expanded the list of restricted substances to 10 items (commonly known as RoHS 3) The

reader is referred to these Directives for the specific definitions and extents of the Directives. No Exemptions are required for

RoHS Compliance on this item. Additionally, Alpha certifies that the listed part number is in compliance with China RoHS

“Marking for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2014.

Substance Maximum Control Value

Lead 0.1% by weight (1000 ppm)

Mercury 0.1% by weight (1000 ppm)

Butyl benzyl phthalate (BBP) 0.1% by weight (1000 ppm)

Dibutyl phthalate (DBP) 0.1% by weight (1000 ppm)

Diisobutyl phthalate (DIBP) 0.1% by weight (1000 ppm)

The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief

at the date of its release. The information provided is designed only as a general guide for the safe handling, storage, and any

other operation of the product itself or the one that it will become part of. The intent of this document is not to be considered a

warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for

determining the applicability of legislation and regulations based on their individual usage of the product.

Authorized Signatory for the Alpha Wire:

Dave Watson, Director of Engineering & QA 10/27/2020