date 10/09/2019
page 1 of 4
SERIES: SJ-4361X-SMT │ DESCRIPTION: MID MOUNT AUDIO JACK
cuidevices.com
FEATURES
• mid mount for low profile applications
• 4 conductor
• multiple switch configurations
PART NUMBER KEY
SJ-4361 X-SMT-TR
Switch Options
4 = no switch
5RS = ring switch
5TS = tip switch
6 = tip and ring switch
7 = tip, ring 1, and ring 2 switch
Base Number Packaging:
TR = Tape & Reel
SPECIFICATIONS
parameter conditions/description min typ max units
rated input voltage 12 Vdc
rated input current 1 A
contact resistance1between terminal and mating plug
between terminal in a closed circuit
50
30
mΩ
mΩ
insulation resistance at 500 Vdc 100 MΩ
voltage withstand for 1 minute 500 Vac
insertion/withdrawal force 0.3 3 kg
operating temperature -25 85 °C
life at a rate of 24 cycles/minute 5,000 cycles
ammability rating UL94V-0
RoHS yes
Note: 1. When measured at a current of less than 100 mA/1 kHz
2. All specications measured at 10~35°C, humidity at 45~85%, under standard atmospheric pressure, unless otherwise noted.
Additional Resources: Product Page | 3D Model | PCB Footprint
date 10/09/2019 │ page 2 of 4CUI Devices │ SERIES: SJ-4361X-SMT │ DESCRIPTION: MID MOUNT AUDIO JACK
cuidevices.com
5.3 0.209
3.00 0.118
2.20 0.087
A
0.1423.600
5.4 0.213
0.1975.00
0.80 0.031
(7 PLCS)
12.1 0.476
0.075
1.90
1.000 0.039
(2 PLCS)
8.10 0.319
(2 PLCS)
4.40 0.173
0.90 0.035
(4 PLCS)
3.0 0.118
6.0 0.236
10.2 0.402
1.0 0.039
3.0 0.118
6.0 0.236
10.2 0.402
8.6 0.339
0.3
11 12
234
101
0.039
(6 PLCS)
(2 PLCS)
0.024
0.60
1.00
0.80 0.031
DETAIL A
SCALE 12 : 1
0.1
-+
COPLANARITY
MECHANICAL DRAWING
MATERIAL PLATING
terminal (1~4) copper alloy gold ash
terminal (10~12) copper alloy gold ash
plastic PA6T or
equivalent
units: mm[inches]
TOLERANCE:
X.X ±0.2mm
X.XX ±0.1mm
X.XXX ±0.05mm
PCB: ±0.05 mm
14
Ø 3.5 MATING PLUG
Model No. SJ-43614-SMT SJ-43615RS-SMT SJ-43615TS-SMT SJ-43616-SMT SJ-43617-SMT
Schematic
PIN
1 sleeve sleeve sleeve sleeve sleeve
2 tip tip tip tip tip
3 ring 1 ring 1 ring 1 ring 1 ring 1
4 ring 2 ring 2 ring 2 ring 2 ring 2
10 NP NP tip switch tip switch tip switch
11 NP ring 1 switch NP ring 1 switch ring 1 switch
12 NP NP NP NP ring 2 switch
2
11
4
3
10
1
12
2
11
4
3
10
1
2
4
3
10
1
2
11
4
3
1
2
4
3
1
Recommended PCB Layout
Top View
Additional Resources: Product Page | 3D Model | PCB Footprint
date 10/09/2019 │ page 3 of 4CUI Devices │ SERIES: SJ-4361X-SMT │ DESCRIPTION: MID MOUNT AUDIO JACK
cuidevices.com
PACKAGING
units: mm
Reel Size: Ø330 mm
Reel QTY: 650 pcs per reel
A: Empty 160 mm min.
B: Empty 100 mm min.
C: Cover 400 mm min.
SOLDERABILITY
parameter conditions/description min typ max units
reel storage at relative humidity <80% 40 °C
reow soldering1see reow prole 255 260 265 °C
drying conditions2parts in reel: bake at 40°C ±5°C for 72 hours
parts removed from reel: bake at 40°C ±5°C for 10 hours
Note: 1. Must reow solder within 72 hours from opening vacuum packaging at a temperature <30°C & relative humidity <60%.
2. When exceeding oor life by >72 hours.
150
50
270
260
250
240
217
180
120
60
70 140 250340 380430
60 120 180 240300 360 420 480
Temperature (°C)
Time (sec)
Additional Resources: Product Page | 3D Model | PCB Footprint
date 10/09/2019 │ page 4 of 4CUI Devices │ SERIES: SJ-4361X-SMT │ DESCRIPTION: MID MOUNT AUDIO JACK
cuidevices.com
CUI Devices oers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI Devices reserves the right to make changes to the product at any time without notice. Information provided by CUI Devices is believed to be accurate and reliable. However, no
responsibility is assumed by CUI Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI Devices products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any
component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to aect its safety or
eectiveness.
rev. description date
1.0 initial release 06/27/2011
1.01 new template applied 06/06/2012
1.02 added TR package option 11/01/2012
1.03 updated PCB layout 08/06/2013
1.04 updated drawing 02/20/2015
1.05 added storage and drying conditions, and tape and
reel packaging details 02/16/2018
1.06 brand update 10/09/2019
The revision history provided is for informational purposes only and is believed to be accurate.
REVISION HISTORY
Additional Resources: Product Page | 3D Model | PCB Footprint