SG PARAMETER SYMBOL MAX UNITS 1 1 1 1 1 1 Quiescent Current Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input Bias Current, -IN Input Offset Current IQ VOS VOS +IB -IB IOS 25C 25C 25C 25C 25C 25C 150V 150V 15V 150V 150V 150V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 7.5 3 5.7 50 50 50 mA mV mV pA pA pA 3 3 3 3 3 3 Quiescent Current Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input BiasCurrent, -IN Input Offset Current IQ VOS VOS +IB -IB IOS -55C -55C -55C -55C -55C -55C 150V 150V 15V 150V 150V 150V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 9.5 5 7.7 50 50 50 mA mV mV pA pA pA 2 2 2 2 2 2 Quiescent Current Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input Bias Current, -IN Input Offset Current IQ VOS VOS +IB -IB IOS 125C 125C 125C 125C 125C 125C 150V 150V 15V 150V 150V 150V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 9.5 5.5 8.2 10 10 10 mA mV mV nA nA nA 4 4 4 4 4 4 4 4 Output Voltage, IO = 40mA Output Voltage, IO = 28.6mA Output Voltage, IO = 15mA Current Limits Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO ICL EN SR AOL CMR 25C 25C 25C 25C 25C 25C 25C 25C 47V 150V 80V 20V 150V 150V 150V 32.5V RL = 1K RL = 5K RL = 5K RL = 100 RL = 5K, AV = 1, CL = 10nF RL = 5K, CC = 50pF RL = 5k, F = 10Hz RL = 5k, F = DC, VCM = 22.5V 40 143 75 36 6 6 6 6 6 6 6 Output Voltage, IO = 40mA Output Voltage, IO = 28.6mA Output Voltage, IO = 15mA Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO EN SR AOL CMR -55C -55C -55C -55C -55C -55C -55C 47V 150V 80V 150V 150V 150V 32.5V RL = 1K RL = 5K RL = 5K RL = 5K, AV = 1, CL = 10nF RL = 5K, CC = 50pF RL = 5K, F = 10Hz RL = 5k, F = DC, VCM = 22.5V 40 143 75 5 5 5 5 5 5 5 Output Voltage, IO = 30mA Output Voltage, IO = 28.6mA Output Voltage, IO = 15mA Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO EN SR AOL CMR 125C 125C 125C 125C 125C 125C 125C 37V 150V 80V 150V 150V 150V 32.5V RL = 1K RL = 5K RL = 5K RL = 5i, AV = 1, CL = 10nF RL = 5K, CC = 50pF RL = 5K, F = 10Hz RL = 5k, F = DC, VCM = 22.5V 30 143 75 BURN IN CIRCUIT TEMP. POWER TEST CONDITIONS 100 100 90 100 100 90 100 100 90 70 1 600 1 600 1 600 V V V mA mV V/s dB dB V V V mV V/s dB dB V V V mV V/s dB dB * These components are used to stabilize device due to poor high frequency characteristics of burn in board. ** Input signals are calculated to result in internal power dissipation of approximately 2.1W at case temperature = 125C. MIN This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible or omissions. All specifications subject to change without notice. APEX MICROTECHNOLOGY CORPORATION * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 * inaccuracies ORDERS (520) 690-8601 * EMAIL are prodlit@apexmicrotech.com PA84MU REV G JULY 2002 (c) 2002 Apex Microtechnology Corp. 1