3MTM Mini D Ribbon (MDR) Connectors .050" Straddlemount Plug - Shielded 101 Series * Wiper-on-wiper contact for reliable repetitive plugging * Solder tails require no special tooling * Contacts: 26, 50, 68, and 100 * See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: August 26, 2008 TS-0698-C Sheet 1 of 2 Physical Insulation Materiel: Glass Reinforced Polyester (PCT) - Body Glass Reinforced Polyester (LCP) - Insert Mold Flammability: UL 94V-0 Color: Black Contact Material: Copper Alloy Underplating: 80 " [ 2.0 m ] Nickel Wiping Area Plating: See Ordering Information Solder Tail Plating: Gold flash over Nickel (RIA E1 & C1 apply) Body Material: Zinc Alloy Plating: Nickel Shroud: Material: Steel Plating: Nickel Marking: 3M Logo & Part Number Electrical Current Rating: 1 A Insulation Resistance: > 5 x 108 at 500 VDC Withstanding Voltage: 500 VRMS for 1 minute Environmental Temperature Rating: -20 C to +85 C UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Mini D Ribbon (MDR) Connectors .050" Straddlemount Plug - Shielded 101 Series Positions Dimensions A B C D 26 0.84 [ 21.4 ] 0.60 [ 15.2 ] 1.02 [ 25.8 ] 0.68 [ 17.2 ] 50 1.44 [ 36.6 ] 1.20 [ 30.5 ] 1.62 [ 41.1 ] 1.27 [ 32.3 ] 68 1.89 [ 48.1 ] 1.65 [ 41.9 ] 2.70 [ 52.5 ] 1.72 [ 43.7 ] 100 2.66 [ 67.5 ] 2.45 [ 62.2 ] 2.87 [ 72.8 ] 2.52 [ 64.0 ] Position 2 Position .025 [ 0.64 ] .050 .003 [ 1.27 ] Position 1 Position 1 Last Position .024 [ 0.60 ] .15 [ 3.7 ] .65 [16.4 ] C .025 [ 0.64 ] .15 [ 3.7 ] .50 [ 12.7 ] C B Position 1 Position 2 .30 [ 7.5 ] .36 [ 9.1 ] Last Position 15 Position A D B .120 [3.09] Typical Board Layout .220 [5.59] .030 p .002 [0.76] Solder pad pattern repeated on both sides of board. .050 p .002 [1.27] Inch [mm] Tolerance Unless Noted Inch .0 .1 .00 .000 .01 .005 [ ] Dimensions for Reference Only Ordering Information 101XX - 900APX Contact Quantity (See Table) Note: A0 = 100 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ Wiping Contact Plating: L = 8 " [0.2 m] min. Gold (RIA E1 & C1 apply) C = 30 " [0.76 m] min. Gold (RIA E1 & C1 apply) Compatible Board Thickness A = 1.0 mm standard (0 = 1.6 mm special order) TS-0698-C Sheet 2 of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373